Job not started (create) in source system when I start the infopackage

Hi experts...
I have a problem with a process. (infopackage)
This message in status during 17 hours.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
After..
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I don't know how resolve this problem, the job that shoul be created in source system was not create.

Hello RBS,
As per the message posted ur idocs are in status 64 so u need to process those idocs manually and you can do this by going to transaction BD87 and reason u get this kind of problems is because you dnt have enough dialog process in application server or because of load balancing so contact your basis team if u face this kind of problem regularly.
Assining Points = Thanks in SDN
Thanks & Regards
Jai
Edited by: jai mam on Jul 8, 2008 4:19 PM

Similar Messages

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Time series does not exist, Error in Source System

Hi friends,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

How to create WebService Source System?

Hi,
I am trying to integrate XI and BI. How do I create a webservice source system? When I create the webservice source system in RSA1, it asks for a logical system name. Do I need to create a RFC destination for this logical system? What other steps should be done here?
Thanks,
Deepthi

Thank you. I am actually referring to step 5 in the below how-to-guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
The step 5 says "create webservice source system". But, it does not give details as to what steps should be taken to actually create this. Anyone, used this approach?
Thanks,
Deepthi

Creating New Source System

Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.

hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps.

Creating New Source System Connection

[First post, so go easy on me!]
I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
Thanks in advance.
Scott

Scott,
You will have to transfer the BC datasources that you want to use from R/3 to BW.
in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
Cheers,
Stuart

Object type RSDS not supported in BAPI source system

Hi
We have a problem when trying to create Data Source in NW2004s with 3rd party tool 'Ascential Datastage' as source system.The error message is "DataSource XXX (DS-DEV): Object type RSDS not supported in BAPI source system".
Is there any note or patch avaialable to be implemented to resolve this problem.Our support package is 07.
Regards
D.Ellora
Message was edited by:
Ellora Dobbala

Hi Ellora,
The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which staging BAPI has not yet been aligned.
Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
Regards,
Anil

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon <b>Client</b> for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

DNS record is not dynamically created in DNS Zone, when joining to DNS domain

hi
in my test lab i have deployed two virtual machines (both are windows server 2008 R2 enterprise).
on vm1 i have installed just DNS role (without Active directory) and created a primary non-ADintegrated zone.
on this DNS zone, i have enabled dynamic update set to
non-secure & secure .
now in my vm2 (as a DNS client) , i set the ip address of this DNS server as preferred DNS server and then in system properties, on the primary DNS suffix field, i entered the name of my DNS domain (mydomain.lab)& rebooted VM2, but the a record of this
client (vm2) is not registered (created ) in mydomain.lab zone.
i respect the record be created like the situations which we join a client to AD domain

Hi John ,
When registering DNS record ,client will send a SOA query to find the primary server of the zone .Then send register message to the server .
We can use nslookup to find the problem :
Open Command Prompt
type nslookup
type set type=soa
type zone name
1. If there is positive response ,check the name of
primary name server and the IP address of the server .
Its name should be vm1.mydomain.lab .If not ,edit the SOA record in the zone .
If no IP address ,edit NS record in the zone .
2. If there is no response ,check the SOA record in the zone .
We can manually delete and recreate the records to ensure there are right SOA and NS records .
Here is the guide for using nslookup :
Nslookup :
https://technet.microsoft.com/en-us/library/cc940085.aspx
Best Regards,
Leo
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Hi Leo, thanks for reply.
i did all steps you mentioned but still no result.
i put an screenshot of my desktop here , everything is shown here:

Not able to change source system connection

Hi, I have problems changing a source system connection from BW. BW is already connected to source system A, which is closed down, and I'd like to connect BW to source system B, which excists and can be accessed. I have tried to use BDLS, but get the message that System B already excists (new one). I try to delete it (Change view logical System), but am not allowed to do this. I get the message "must not be deleted, first delete from distribution model." And thats where I am stuck. Can anyone guide me on my way?
Regards E!

Comment to the last answer:
When I try to delete in SALE I am told that the source system also excists in the Distribution Model (CUA) and can therefore not be deleted. It must be deleted in the distribution model first. I find CUA at BD64. Looks like this is the connection to Solution Manager. What are the consequences for deleting the Source System here? And will it hlep me to solve my problem, which is that I can't change my connection from Source System A to new Source System B?
Regards E

Creating multiple source systems one logical system

Hi,
The requirement is to create two source systems using same logical name and different RFC connections to ECC?
We wanted to do some regular activities using one source system and some drill down activities using different source system.
I am getting error when I try to create second source system "source system already exist"
Please advice.
Thanks.

Hi,
I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
Hope this helps.....
Regards,
Suman

Could not make connection to source system

Hello Experts,
I am trying to fetch data based on selection for last month in info-package but when I try to enter selection (pull down button), I get error message - "Could not make connection to source system..."
Any idea why this message?
I have already checked connection to ECC - is fine.
Datasource is replicated.
Also if I try to run info-package without selection - I am getting yellow status, No data fetched. RSA3 shows many rows but Info-package to data (Full extraction.)
Regards,
SM

Srini/Vikram,
user credential is good. sm59 connection is good. there is data in selection as RSA3 fetches rows in ecc.
when I run any info-package - I am getting yellow status? No data while rsa3 indicate data for Full update?
why so?
I am more of design person, not much into hands-on - so seeing these error for first time.
Q1) if a package is already schedule - let us sat thru data source 2lis_11_vaitm. Now I want to go back and retrieve last month data already extracted... once again. I should be able to pull this data in new infopackage using Full update - data selection option.
Q2) - rsa3 should fetch data based on set-up tables, so any infopackage based on Full update mode - should fetch data - independent of any other infopackage.
q3) we need to do delete and fill-set-up table - only if extract structure is changed? right?
regards, sm

Create ECC source systems to talk to BI

I am a developer and the system that I am working with do not have the source systems created. There is no Basis support here yet. Would someone help by listing the steps to create the source systems, so that the ECC systems can talk to the BI NW2004s system? I want to be able to load data.

Hi,
Please check these links.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps
Regards.

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
http://www.floodgap.com/software/tenfourfox/

Job not started (create) in source system when I start the infopackage

Similar Messages

Maybe you are looking for