JOB on a specific node

Is it possible to execute a scheduled job to run on a specific node.

BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB_CLASS
      job_class_name          => 'TEST'
     ,resource_consumer_group => 'DEFAULT_CONSUMER_GROUP'
     ,service                 => 'ORCL'
     ,log_history             => 30
     ,comments                => NULL
END;
/ ORCL must exists:
SELECT NAME FROM DBA_SERVICES:
NAME
SYS$BACKGROUND
SYS$USERS
ORCLXDB
ORCL
BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'SYS.TEST_JOB'
      ,start_date      => TO_TIMESTAMP_TZ('sysdate','yyyy/mm/dd hh24:mi:ss.ff tzr')
      ,repeat_interval => NULL
      ,end_date        => NULL
      ,job_class       => 'TEST'
      ,job_type        => 'PLSQL_BLOCK'
      ,job_action      => 'begin null; end;'
      ,comments        => NULL
/

Similar Messages

Running an external job at the specific node out of a 2 Node RAC database.

Hi. all.
I created a job , which runs an external script, by using dbms_scheduler.
Our database is 2 node RAC database(10.2.0.2.0).
The external script exists at a only one Node(Node 1).
select status,instance_id, additional_info
from dba_scheduler_job_run_details
where job_name='TEST_EXPORT_JOB'
shows that jobs which run on Node 2 failed.
Of course, the external script does not exist on Node 2.
I would like to force the job to ALWAYS run on Node 1.
How can I do that? Is there any ideas?
Locating the script on Node 2 is not the option.
Best and Regards.

Hi,
In the upcoming 11g release there is an easy solution for this - a new attribute instance_id for a job.
For 10g there is a workaround. Basically you create a service with just the one instance you want the job to run on. Then create a job class pointing to that service. Finally have your job be in the job class you just created.
If you create a service and job class per instance you can get jobs to run under whichever instance you want.
Hope this helps,
Ravi.

Pin dbms_cube.build parallel jobs to specific node on RAC

Is there a way to Pin dbms_cube.build parallel jobs to specific node on RAC.Currently the job with say parallelism of 10 spans over all nodes of RAC.
IS there a way to control it so the child jobs runs on subset of nodes. Unable to see how we can tie job classes and services with dbms_cube.build .
Any suggestions will be hugely appreciated.

Used undocumented JOB_CLASS and it seems to working fine.
SQL> desc sys.dbms_cube.build
Parameter Type Mode Default?
SCRIPT VARCHAR2 IN
METHOD VARCHAR2 IN Y
REFRESH_AFTER_ERRORS BOOLEAN IN Y
PARALLELISM BINARY_INTEGER IN Y
ATOMIC_REFRESH BOOLEAN IN Y
AUTOMATIC_ORDER BOOLEAN IN Y
ADD_DIMENSIONS BOOLEAN IN Y
SCHEDULER_JOB VARCHAR2 IN Y
MASTER_BUILD_ID BINARY_INTEGER IN Y
REBUILD_FREEPOOLS BOOLEAN IN Y
NESTED BOOLEAN IN Y
JOB_CLASS VARCHAR2 IN Y

How to blick tree view few specific nodes

here i got a code which show how to blink tree view node but i am confuse that how to blink few node.
Answered by:
Avatar of Tamer Oz
20,185
Points
Top 0.5
Tamer Oz
Partner Joined Sep 2009
2
8
17
Tamer Oz's threads
Show activity
Treeview control - How to make a node blink?
Visual Studio Languages
.NET Framework
>
Visual C#
Question
Alert me
Question
Vote as helpful
0
Vote
Hi,
Is there a "elegant" way to make blink a treeview node?
I am thinking to use a timer with the collection of nodes that I want to make the blink effect, and update the icon ...
Friday, November 06, 2009 6:19 PM
Reply
|
Quote
|
Report as abuse
Avatar of Kikeman
Kikeman
R. BOSCH
105 Points
All replies
Question
Vote as helpful
0
Vote
Hi,
You can develop your custom control for this purpose. The logic you mentioned was correct. Here is a sample control that I developed by the logic you mentioned.
public class BlinkingTreeView : TreeView
private Timer t = new Timer();
private List<TreeNode> blinkingNodes = new List<TreeNode>();
public BlinkingTreeView()
t.Interval = 1000;
t.Tick += new EventHandler(t_Tick);
bool isNodeBlinked = false;
void t_Tick(object sender, EventArgs e)
foreach (TreeNode tn in blinkingNodes)
if (isNodeBlinked)
//update Icon
tn.Text = tn.Text.Substring(0, tn.Text.Length - 1);//to test
isNodeBlinked = false;
else
//update Icon
tn.Text = tn.Text + "*";//to test
isNodeBlinked = true;
public void AddBlinkNode(TreeNode n)
blinkingNodes.Add(n);
public void RemoveBlinkNode(TreeNode n)
blinkingNodes.Remove(n);
public void ClearBlinkNodes()
blinkingNodes.Clear();
public List<TreeNode> BlinkingNodes
get { return blinkingNodes; }
public int BlinkInterval
get { return t.Interval; }
set { t.Interval = value; }
public void StartBlinking()
isNodeBlinked = false;
t.Enabled = true;
public void StopBlinking()
t.Enabled = false;
just show me how to use BlinkingTreeView class. i will have tree view which will have few node and few nodes may have few child nodes. now how to achieve by this class BlinkingTreeView and show me how to blink few specific node not all. thanks

better to come with code. first populate tree view with some dummy node this way
Root
       Child1
                Child1-sub1
                Child1-sub2
       Child2
                Child2-sub1
                Child2-sub2
now blink Child1-sub2 & Child2-sub1. please come with code. thanks

How to expand a tree at a specific node/item?

Hi,
we have a tree and the nodes/items were binded to context with this code
lo_nd_nvccmp = wd_context->get_child_node( name = wd_this->wdctx_nvccmp ).
lo_nd_tree = lo_nd_nvccmp->get_child_node( name = wd_this->wdctx_tree ).
lo_el_tree = lo_nd_tree->bind_structure( new_item = ls_tree set_initial_elements = abap_false ).
We want that the tree is expanded at a specific node/item?
The structure has the field is_expanded of type WDY_BOOLEAN. I think that if the field of the right structure is 'X' then the tree should expanded. How can we find the right structure in the context and change this field to 'X'?
Code is appreciated.
Thanks, regards
Susanne

Oh, apparently if you try that call right after you create
the Tree, it will throw a null reference exception. That might
count as a bug in the flex api...
If you create a Tree, and give it's dataProvider some xml
data, and then add it to the stage (addChild), and then you call
expandItem or expandChildrenOf() right after, you will get a null
object exception. You have to wait... for something. I don't know
what.
I even tried calling _tree.invalidateList() before the
expandItem, but it will still throw the error...
I wonder what the Tree needs to wait for? Is this a bug for
Adobe to fix?

XSLT Mapping - replacing attribute value of a specific node

Hi,
I want to replace the value of an attribute for a specific node. Can you please tell me how this can be achieved using XSLT coding?
The input file is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<GovTalkMessage xmlns="http://www.govtalk.gov.uk/CM/envelope">
     <EnvelopeVersion>2.0</EnvelopeVersion>
     <Header>
          <MessageDetails>
               <Class>IR-PAYE-MOV</Class>
               <Qualifier>request</Qualifier>
               <Function>submit</Function>
               <CorrelationID/>
               <Transformation>XML</Transformation>
               <GatewayTimestamp/>
          </MessageDetails>
          <SenderDetails>
               <IDAuthentication>
                    <SenderID>isv142</SenderID>
                    <Authentication>
                         <Method>MD5</Method>
                         <Value>1L2xFE8WqHHI5iVMGhixAg==</Value>
                    </Authentication>
               </IDAuthentication>
          </SenderDetails>
     </Header>
     <GovTalkDetails>
          <Keys>
               <Key Type="TaxOfficeNumber">123</Key>
               <Key Type="TaxOfficeReference">MD345</Key>
          </Keys>
          <ChannelRouting>
               <Channel>
                    <URI>0142</URI>
               </Channel>
          </ChannelRouting>
     </GovTalkDetails>
     <Body>
          <IRenvelope xmlns="http://www.govtalk.gov.uk/taxation/PAYE/MOV/09-10/1">
               <IRheader>
                    <Keys>
                         <Key Type="TaxOfficeNumber">123</Key>
                         <Key Type="TaxOfficeReference">MD345</Key>
                    </Keys>
                    <PeriodEnd>2009-09-29</PeriodEnd>
                    <DefaultCurrency>GBP</DefaultCurrency>
                    <IRmark Type="generic">03Bfkipk6UDWSXLj77ObBVoK894=</IRmark>
                    <Sender>Company</Sender>
               </IRheader>
               <InYearMovements>
                    <EmployerName>form p60</EmployerName>
                    <P46 Statement="A">
                         <Name>
                              <Fore>Smith</Fore>
                              <Sur>John</Sur>
                         </Name>
                         <Address>
                              <Line>Sterling Residency</Line>
                              <Line>Gehde</Line>
                              <Line>Hedge End</Line>
                              <Line>Southampton</Line>
                              <PostCode>12345678</PostCode>
                         </Address>
                         <WorksNumber>20090030</WorksNumber>
                         <NINO>NP258719D</NINO>
                         <BirthDate>1985-07-11</BirthDate>
                         <Gender>male</Gender>
                         <StartDate>2009-04-20</StartDate>
                         <TaxCodeInUse>647L</TaxCodeInUse>
                    </P46>
               </InYearMovements>
          </IRenvelope>
     </Body>
</GovTalkMessage>
I want to replace the value 'http://www.govtalk.gov.uk/taxation/PAYE/MOV/09-10/1' of attribute xmlns belonging to the node 'IRenvelope' with the value 'http://www.govtalk.gov.uk/taxation/PAYE/MOV/10-11/1'
So the output of the mapping should be:
<?xml version="1.0" encoding="UTF-8"?>
<GovTalkMessage xmlns="http://www.govtalk.gov.uk/CM/envelope">
     <EnvelopeVersion>2.0</EnvelopeVersion>
     <Header>
          <MessageDetails>
               <Class>IR-PAYE-MOV</Class>
               <Qualifier>request</Qualifier>
               <Function>submit</Function>
               <CorrelationID/>
               <Transformation>XML</Transformation>
               <GatewayTimestamp/>
          </MessageDetails>
          <SenderDetails>
               <IDAuthentication>
                    <SenderID>isv142</SenderID>
                    <Authentication>
                         <Method>MD5</Method>
                         <Value>1L2xFE8WqHHI5iVMGhixAg==</Value>
                    </Authentication>
               </IDAuthentication>
          </SenderDetails>
     </Header>
     <GovTalkDetails>
          <Keys>
               <Key Type="TaxOfficeNumber">123</Key>
               <Key Type="TaxOfficeReference">MD345</Key>
          </Keys>
          <ChannelRouting>
               <Channel>
                    <URI>0142</URI>
               </Channel>
          </ChannelRouting>
     </GovTalkDetails>
     <Body>
          <IRenvelope xmlns="http://www.govtalk.gov.uk/taxation/PAYE/MOV/10-11/1">
               <IRheader>
                    <Keys>
                         <Key Type="TaxOfficeNumber">123</Key>
                         <Key Type="TaxOfficeReference">MD345</Key>
                    </Keys>
                    <PeriodEnd>2009-09-29</PeriodEnd>
                    <DefaultCurrency>GBP</DefaultCurrency>
                    <IRmark Type="generic">03Bfkipk6UDWSXLj77ObBVoK894=</IRmark>
                    <Sender>Company</Sender>
               </IRheader>
               <InYearMovements>
                    <EmployerName>form p60</EmployerName>
                    <P46 Statement="A">
                         <Name>
                              <Fore>Smith</Fore>
                              <Sur>John</Sur>
                         </Name>
                         <Address>
                              <Line>Sterling Residency</Line>
                              <Line>Gehde</Line>
                              <Line>Hedge End</Line>
                              <Line>Southampton</Line>
                              <PostCode>12345678</PostCode>
                         </Address>
                         <WorksNumber>20090030</WorksNumber>
                         <NINO>NP258719D</NINO>
                         <BirthDate>1985-07-11</BirthDate>
                         <Gender>male</Gender>
                         <StartDate>2009-04-20</StartDate>
                         <TaxCodeInUse>647L</TaxCodeInUse>
                    </P46>
               </InYearMovements>
          </IRenvelope>
     </Body>
</GovTalkMessage>
Thanks & Regards,
Aditi Naik

Hi,
You get name of an attribute by this code
<xsl:for-each select="@*">
    <xsl:text>Value of </xsl:text>
           <xsl:value-of select="name(.)"/>
    <xsl:text> is </xsl:text><xsl:value-of select="."/>
</xsl:for-each>
Change value by providing new value in <xsl:value-of select="."/>
Regards
suraj

IXML - Checking if a specific node exists in XML data

Hi,
I´m reading XML data by using iXML classes. One XML file I´m reading contains header and
item data.
Right now I´m starting with reading the header attributes and then read all nested nodes and their attribute data. That works all fine, but now I had the error, that the XML file wrongly didn´t contain the items.
My XML reading method then ended up in a dump because the node was null:
l_node = l_iterator->get_next( ).
Can anybody give me an advice, how to check at the beginning of reading my xml data, if a specific node (in my case the node for items) exists in the XML data? If not, I want to stop with an error message. I want to check that at the beginning, before reading all element data, to keep my method structured.
Thank you very much!

Hi,
You can create a filter and set that filter to the iterator. If this is done the iterator returns you only the node with a specific node name or node ID.
You can also check the parsing in the following WIKI code gallery
https://wiki.sdn.sap.com/wiki/x/JoDmAQ
Subroutines create_set_filter_attribute and parse_xml_file would be helpful.

Using XSLT to empty nodes with the exception of specific node.

I have XSLT code working which will remove all the empty elements. My user wishes to exempt a specific node, <BypassDateEdits>. I can not figure out the correct syntax to do this.
Source XML is:
<?xml version="1.0" encoding="UTF-8"?>
<IMDSCDB xmlns="http://xml.dod.mil/log/maint/fs/main/4.0.0">
<EndItemTCTOReporting originator="EMOC">
<PartialJobDataDocumentationData/>
<JobControlNumber>
<EventId>052790038</EventId>
<WorkcenterEvent>001</WorkcenterEvent>
</JobControlNumber>
<End/>
<HomeEnterpriseLocationCode>7494</HomeEnterpriseLocationCode>
<CurrentEnterpriseLocationCode>7494</CurrentEnterpriseLocationCode>
<HostUnitDateAndTime>2006-02-23T19:29:37</HostUnitDateAndTime>
<TransactionOrdinalDate>06054</TransactionOrdinalDate>
<ComponentPosition>0</ComponentPosition>
<HowMalfunctionCode>802</HowMalfunctionCode>
<UnitsProduced>01</UnitsProduced>
<StartTime>0800</StartTime>
<StopDate>05200</StopDate>
<StopTime>0805</StopTime>
<CrewSize>6</CrewSize>
<CategoryOfLaborCode>1</CategoryOfLaborCode>
<ActivityIdentifierCode>02</ActivityIdentifierCode>
<CorrectedByIMDSCDBUserId>GU03CW</CorrectedByIMDSCDBUserId>
<CorrectiveActionNarrative>Test Test</CorrectiveActionNarrative>
<InspectedByIMDSCDBUserId>GU03CW</InspectedByIMDSCDBUserId>
<DocumentMoreTCTOThisJobControlNumber/>
<InspectionPassed>Y</InspectionPassed>
<BypassDateEdits/>
</EndItemTCTOReporting>
</IMDSCDB>
Desired output is:
<?xml version="1.0" encoding="UTF-8"?>
<IMDSCDB xmlns="http://xml.dod.mil/log/maint/fs/main/4.0.0">
<EndItemTCTOReporting originator="EMOC">
<PartialJobDataDocumentationData/>
<JobControlNumber>
<EventId>052790038</EventId>
<WorkcenterEvent>001</WorkcenterEvent>
</JobControlNumber>
<HomeEnterpriseLocationCode>7494</HomeEnterpriseLocationCode>
<CurrentEnterpriseLocationCode>7494</CurrentEnterpriseLocationCode>
<HostUnitDateAndTime>2006-02-23T19:29:37</HostUnitDateAndTime>
<TransactionOrdinalDate>06054</TransactionOrdinalDate>
<ComponentPosition>0</ComponentPosition>
<HowMalfunctionCode>802</HowMalfunctionCode>
<UnitsProduced>01</UnitsProduced>
<StartTime>0800</StartTime>
<StopDate>05200</StopDate>
<StopTime>0805</StopTime>
<CrewSize>6</CrewSize>
<CategoryOfLaborCode>1</CategoryOfLaborCode>
<ActivityIdentifierCode>02</ActivityIdentifierCode>
<CorrectedByIMDSCDBUserId>GU03CW</CorrectedByIMDSCDBUserId>
<CorrectiveActionNarrative>Test Test</CorrectiveActionNarrative>
<InspectedByIMDSCDBUserId>GU03CW</InspectedByIMDSCDBUserId>
<InspectionPassed>Y</InspectionPassed>
<BypassDateEdits/>
</EndItemTCTOReporting>
</IMDSCDB>
XSLT to remove all empty nodes is:
<?xml version="1.0"?>
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:template match="@* | node()">
<xsl:copy>
<xsl:apply-templates select="@* | node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="*[not(descendant::text()[normalize-space()])]" >
</xsl:template>
</xsl:stylesheet>
I believe I need to use the | operator to select the additional node set of just the <BypassDateEdits> node, but repeated attempt and research on the web has enabled me to find a solution.
Any assistance would be appreciated.
Bill

having gotten a big clue from tsuji, I finally achieved the correct XSLT.
This XSLT:
<?xml version="1.0"?>
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
version="1.0">
<xsl:template match="@* | node()">
<xsl:copy>
<xsl:apply-templates select="@* | node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="*[not(local-name()='BypassDateEdits') and namespace-uri()='http://xml.dod.mil/log/maint/fs/main/4.0.0'][not(descendant::text()[normalize-space()])]" >
</xsl:template>
</xsl:stylesheet>
Yields the desired results:
<?xml version="1.0" encoding="UTF-8"?><IMDSCDB xmlns="http://xml.dod.mil/log/maint/fs/main/4.0.0">
<EndItemTCTOReporting originator="EMOC">
<JobControlNumber>
<EventId>052790038</EventId>
<WorkcenterEvent>001</WorkcenterEvent>
</JobControlNumber>
<HomeEnterpriseLocationCode>7494</HomeEnterpriseLocationCode>
<CurrentEnterpriseLocationCode>7494</CurrentEnterpriseLocationCode>
<HostUnitDateAndTime>2006-02-23T19:29:37</HostUnitDateAndTime>
<TransactionOrdinalDate>06054</TransactionOrdinalDate>
<ComponentPosition>0</ComponentPosition>
<HowMalfunctionCode>802</HowMalfunctionCode>
<UnitsProduced>01</UnitsProduced>
<StartTime>0800</StartTime>
<StopDate>05200</StopDate>
<StopTime>0805</StopTime>
<CrewSize>6</CrewSize>
<CategoryOfLaborCode>1</CategoryOfLaborCode>
<ActivityIdentifierCode>02</ActivityIdentifierCode>
<CorrectedByIMDSCDBUserId>GU03CW</CorrectedByIMDSCDBUserId>
<CorrectiveActionNarrative>Test Test</CorrectiveActionNarrative>
<InspectedByIMDSCDBUserId>GU03CW</InspectedByIMDSCDBUserId>
<InspectionPassed>Y</InspectionPassed>
<BypassDateEdits/>
</EndItemTCTOReporting>
</IMDSCDB>
Thank you tsuji,
Bill

Xml search for specific node/attribute

Hi,
I load an xml in as3 and need to find and output (as an
XMLList) a specific node with a specific attribute (example:
<xs:element name="abcd"> ), or at least find out its path
(after, I would know what to do to get the XMLList). I looked at
the XPath classes for Actionscript but the documentation is very
poor and I did not see any method doing this. Could someone help me
please? If no method exists, how can I loop through all the xml and
test each node to see if it is the proper node I am looking for?
thanks so much in advance for your help
Pierrot

You could do it this way, using the descendant accessor:
var xml:XML =
<data xmlns:xs="
http://www.w3.org/2001/XMLSchema">
<xs:element name="abcd">
<tagA>hjfhsldf</tagA>
<tagB>dummy stuff</tagB>
</xs:element>
<xs:sequence>
<xs:element name="dd">
<tagA>words</tagA>
<tagB>dummy stuff too</tagB>
</xs:element>
</xs:sequence>
</data>;
var xs:Namespace = xml.namespaceDeclarations()[0];
var nodelist:XMLList = xml..xs::element.(@name=="dd");
trace(nodelist)
If you need generic code that accounts for no namespaces, you
can use
something like this:
var xs:Namespace = xml.namespaceDeclarations()[0];
var nodelist:XMLList =
(xs == null || xs == undefined)
? xml..element.(@name=="dd");
: xml..xs::element.(@name=="dd");
trace(nodelist)

Add node to a specific node in JTree

I use the following TreePanel class to add node to the tree. My question is how to add a new node under
a specific node which has been created before. In other words, how to get the path and identify the node.
For e.g., I first loaded some raw data files and created the "raw data" node, later I need to load another file
and create a new node under the "raw data" node. Each node is created by using user object. Any help is greatly appreicated.
import java.awt.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.tree.*;
public class TreePanel extends JPanel {
protected DefaultMutableTreeNode rootNode;
protected DefaultTreeModel treeModel;
protected JTree tree;
public TreePanel() {
    super(new GridLayout(1,0));
    rootNode = new DefaultMutableTreeNode("Experiment");
    treeModel = new DefaultTreeModel(rootNode);
    tree = new JTree(treeModel);
    tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
    tree.setShowsRootHandles(true);
    JScrollPane scrollPane = new JScrollPane(tree);
    add(scrollPane);
public JTree getTree(){
    return tree;
/* Add child to the currently selected node. */
public DefaultMutableTreeNode addObject(Object child){
    DefaultMutableTreeNode parentNode = null;
    TreePath parentPath = tree.getSelectionPath();
    if(parentPath == null){
      parentNode = rootNode;
    else{
      parentNode = (DefaultMutableTreeNode)(parentPath.getLastPathComponent());
    return addObject(parentNode, child, true);
/* Add child */
public DefaultMutableTreeNode addObject(DefaultMutableTreeNode parent, Object child){
    return addObject(parent, child, false);
/* Add child */
public DefaultMutableTreeNode addObject(DefaultMutableTreeNode parent, Object child, boolean shouldBeVisible){
    DefaultMutableTreeNode childNode = new DefaultMutableTreeNode(child);
    if(parent == null){parent = rootNode;}
    treeModel.insertNodeInto(childNode, parent, parent.getChildCount());
    if(shouldBeVisible){
      tree.scrollPathToVisible(new TreePath(childNode.getPath()));
    return childNode;
/* Add child */
public DefaultMutableTreeNode addObject(DefaultMutableTreeNode parent, DefaultMutableTreeNode child){
   if(parent == null){parent = rootNode;}
   treeModel.insertNodeInto(child, parent, parent.getChildCount());
   return child;
}Thanks in advance!

public static DefaultMutableTreeNode findNode(DefaultMutableTreeNode from, Object userObject) {
          if (userObject == null && from.getUserObject() == null) {
               return from;
          } else if (userObject.equals(from.getUserObject())) {
               return from;
          DefaultMutableTreeNode node = null;
          for (int i = 0; i < from.getChildCount(); i ++) {
               node = (DefaultMutableTreeNode) from.getChildAt(i);
               if (userObject == null) {
                    if (userObject == node.getUserObject()) {
                         break;
               } else {
                    if (userObject.equals(node.getUserObject())) {
                         break;
               node = null;
          if (node != null) {
               return node;
          //Node not found
          //dig deeper
          for (int i = 0; i < from.getChildCount(); i ++) {
               node = (DefaultMutableTreeNode) from.getChildAt(i);
               if (!node.isLeaf()) {
                    node = findNode(node, userObject);
                    if (node != null) {
                         return node;
          //Not found
          return null;
     }

How to iterate to a specific node in Oracle ATS OpenScript

Hi,
I have recorded a script in Oracle ATS Open Script tool. I want to iterate back to a specific node after completing the first iteration. Is there any way to do that?
I don't want to iterate back to first step again and again.
Regards,
Sahil
Edited by: 1009073 on May 31, 2013 1:39 AM

Hi, DeepuM,
Thnxs fr this info,I've followed the step which was mentioned earlier in your posts..but i m getting error.
here's my scenario : i have a lo-gin script node and two child scripts in RUN Section,i want to iterate only the lo-gin node.. hence i moved the child scripts to initialize section ended up with this error "Failure when running child script"
kindly help.
Thanks in Advance.
Regards,
Diane

JBoss cluster - call to a specific node

Hi!
is it possible to send a remotecall only to a specific node in the cluster?
Simple example:
I have three nodes in my cluster (A, B, C) and i want to send a call only to an object on node C. Node A and B shouldn't be involved in this call.
Best Regards
Hendrik

Hi,
Assuming "doc" is an XMLType variable containing your XML document, you can do :
SELECT insertchildxml(doc, 'ROWSET', '@IS_SUCCESS', '1') INTO doc FROM dual;Slightly off-topic, but to add attributes to ROW elements, DBMS_XMLGEN can handle it for us provided we prefix column aliases with "@".
For example :
SQL> SELECT dbms_xmlgen.getXML('SELECT ''Hello!'' as "@msg" FROM dual') FROM dual;
DBMS_XMLGEN.GETXML('SELECT''HE
<?xml version="1.0"?>
<ROWSET>
<ROW msg = "Hello!">
</ROW>
</ROWSET>
Edited by: odie_63 on 2 nov. 2010 12:50 - added remark on ROW attributes

How to address message to the specific node of the ESB cluster

Hi!
We are running ESB on two node active-active cluster configuration. We use custom adapter to communicate with customer legacy system over Socket connection. The point is, that we need to transfer large amount of data from our database into customer system using one open socket connection. Because of memory limitation we had to split data into multiple messages in ESB. This socket connection can be open from any of the active cluster node, but ones it's open all messages must be send within the node which had open the connection.So, the messages should not arrive into another node. The question: How is it possible to address (route) ESB messages into specific node of the cluster?
Thanks in advance.
Jaro,

Muthu92 wrote:
Thank you for your reply. It is very useful for me. But i can't give conditional operator in that operator. It is showing error.
My Test cases
A[0]+A[1]>150
A[31]-50 <100.
If those are your exact statements, then they don't make sense in a formula node. You have to use them in an if-statement or some other type of control logic. This mimics text-based programming languages such as C... See here for instructions on formula node syntax: http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/formula_node_syntax/
For instance, you COULD say something like:
**In this example, let A[0] == x, A[1] == y, A[31] == z**
if(x+y>150)
/* do something if this is true */
else if(z-50 < 100)
/* do something else */
EDIT:
It should also be noted that Variable Names MUST be lowercase!! I just discovered this
EDIT2:
I stand corrected. After trying to create an example and digging through the LabVIEW Help, I stumbled across this:
Differences between the Parser in the Mathematics VIs and the Formula Node
The parser in the Mathematics VIs supports all elements that Formula Nodes support with the following exceptions:
Variables—Only a, a0, ..., a9, ... z, z0, ..., z9, are valid.
Logical, conditional, inequality, equality—?:,, &&, !=, ==, <, >, <=, and >= are not valid.
Functions—atan2, max, min, mod, pow, rem, and sizeOfDim are not valid. You can use these functions in a Formula Node or use their corresponding LabVIEW functions.
So it DOES NOT seem like Eval Formula Node can do conditionals like you want. I would just implement them using a LabVIEW based algorithm after all. Trying to out smart the formula nodes to avoid simple LabVIEW code is just too much of a hassle
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos!

Xsl for removing specific nodes and modifying one node.

Hello,
i have the urgent need to remove specific nodes
and modify one node in my XML.
the xml as input :
<?xml version="1.0" encoding="utf-8"?>
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME name="xxxx" />
</PROPERTIES>
<DATAFRAME id="MAIN">
<LAYERLIST>
<LAYERDEF id="0" visible="false" query="" />
<LAYERDEF id="1" visible="false" query="" />
<LAYERDEF id="2" visible="false" query="" />
<LAYERDEF id="3" visible="false" query="" />
<LAYERDEF id="4" visible="false" query="" />
<LAYERDEF id="5" visible="false" query="" />
<LAYERDEF id="6" visible="false" query="" />
<LAYERDEF id="7" visible="false" query="" />
<LAYERDEF id="8" visible="false" query="" />
<LAYERDEF id="9" visible="false" query="" />
<LAYERDEF id="10" visible="false" query="" />
</LAYERLIST>
<MAPSERVICELIST>
<MAPSERVICEDEF service="BASEMAP" >
<LAYERLIST>
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
</MAPSERVICEDEF>
<MAPSERVICEDEF service="MAP1">
<LAYERLIST>
<LAYERDEF id="4" visible="True" query="" />
<LAYERDEF id="3" visible="True" query="" />
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
</MAPSERVICEDEF>
</MAPSERVICELIST>
</DATAFRAME>
</GET_LAYOUT>
</REQUEST>
</PLOT>
what i want to have is:
<?xml version="1.0" encoding="utf-8"?>
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME name="xxxx" />
</PROPERTIES>
<DATAFRAME id="MAIN">
<LAYERLIST>
<LAYERDEF id="6" visible="True" query="" />
<LAYERDEF id="5" visible="True" query="" />
<LAYERDEF id="4" visible="True" query="" />
<LAYERDEF id="3" visible="False" query="" />
<LAYERDEF id="2" visible="True" query="" />
<LAYERDEF id="1" visible="False" query="" />
</LAYERLIST>
<MAPSERVICELIST/>
</DATAFRAME>
</GET_LAYOUT>
</REQUEST>
</PLOT>
as you see, <MAPSERVICELIST/> is empty and <LAYERLIST> contains all <LAYERDEF> of <MAPSERVICEDEF>/<LAYERLIST>
The ones of BASEMAP are kept unchanged but the ones of MAP1 are having a new attribute value for id.
Thanks four your help.
Regards.

You can implement very straightforward map in BizTalk like below:
If you are interested in XSLT of this map, I copied below which visual studio gave me when i validated the map:
<?xml version="1.0" encoding="UTF-16"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl var" version="1.0">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="/">
<xsl:apply-templates select="/PLOT" />
</xsl:template>
<xsl:template match="/PLOT">
<PLOT>
<REQUEST>
<GET_LAYOUT>
<PROPERTIES>
<MAPNAME>
<xsl:if test="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/@name">
<xsl:attribute name="name">
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/@name" />
</xsl:attribute>
</xsl:if>
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/MAPNAME/text()" />
</MAPNAME>
<xsl:value-of select="REQUEST/GET_LAYOUT/PROPERTIES/text()" />
</PROPERTIES>
<DATAFRAME>
<xsl:if test="REQUEST/GET_LAYOUT/DATAFRAME/@id">
<xsl:attribute name="id">
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/@id" />
</xsl:attribute>
</xsl:if>
<LAYERLIST>
<xsl:for-each select="REQUEST/GET_LAYOUT/DATAFRAME/MAPSERVICELIST/MAPSERVICEDEF">
<xsl:for-each select="LAYERLIST/LAYERDEF">
<LAYERDEF>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@id">
<xsl:attribute name="id">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@id" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@id">
<xsl:attribute name="id">
<xsl:value-of select="@id" />
</xsl:attribute>
</xsl:if>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@visible">
<xsl:attribute name="visible">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@visible" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@visible">
<xsl:attribute name="visible">
<xsl:value-of select="@visible" />
</xsl:attribute>
</xsl:if>
<xsl:if test="../../../../LAYERLIST/LAYERDEF/@query">
<xsl:attribute name="query">
<xsl:value-of select="../../../../LAYERLIST/LAYERDEF/@query" />
</xsl:attribute>
</xsl:if>
<xsl:if test="@query">
<xsl:attribute name="query">
<xsl:value-of select="@query" />
</xsl:attribute>
</xsl:if>
</LAYERDEF>
</xsl:for-each>
</xsl:for-each>
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/LAYERLIST/text()" />
</LAYERLIST>
<MAPSERVICELIST>
<xsl:text> </xsl:text>
</MAPSERVICELIST>
<xsl:value-of select="REQUEST/GET_LAYOUT/DATAFRAME/text()" />
</DATAFRAME>
<xsl:value-of select="REQUEST/GET_LAYOUT/text()" />
</GET_LAYOUT>
<xsl:value-of select="REQUEST/text()" />
</REQUEST>
</PLOT>
</xsl:template>
</xsl:stylesheet>
You can highlight the issue if you have any specific one.
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

Oracle RAC (job distribution to indivisual node)

Is it possible in Real application cluster to dedicate set of node for insertion job and set of node for searching job and set of node for Text indexing job.

if you use job scheduler, you may assigne each job to a separate job class and for each job class you may assign different service which will be offered by different instances in cluster. when job starts, he will connect to the service defined for job class ... and there you go...

JOB on a specific node

Similar Messages

Maybe you are looking for