Job Opening - LabVIEW Software Engineer

Belcan is an entrepreneurial and market driven organization committed to quality and customer satisfaction. Belcan is among the top 10% of the largest engineering firms in the country with over 6500 employees at 60 locations. The Advanced Engineering and Technology Division (AETD) of Belcan is a global provider of highly technical engineering services to a wide variety of industries.
We are currently looking for a LabVIEW Software Engineer to design and develop LabVIEW software based automated test systems for advanced jet engines, digital controls, electrical systems, and digital avionics.
Requires a Bachelor's degree in Electrical Engineering, Computer or Software Engineering or a related field, and 3 years of experience with National Instruments LabVIEW and other National Instruments products and technologies. Familiarity with the application of engineering concepts, practices, and procedures for: a) the development of digital system hardware interfaces b) interfacing computers, c) designing and developing automated test systems, data systems, and instrumentation. Familiarity with Real Time Operating Systems, embedded systems, and aircraft communications protocols is a plus.
Due to the nature of the work being done applicants must be U. S. Citizens or permanent residents. These are direct full time positions. We offer a very competitive compensation and benefits program. Please email your resume to [email protected] Belcan is an equal opportunity employer. EOE/M/F/D/V

The postion is located in Cincinnati, Ohio.

Similar Messages

Job Opening for Test Engineer in Detroit, Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 10 years.
Please send me Private Message (PM) for the email to send your resumes.
Note that candidates must be authorized to work in US (H1B VISA)
Still this position is open. My cantact number is 1-248 479 3055
Thanks
Vijay

Name:Anoop Kumar.K.V
AddressF1,SreeBhavan,SaradambaNagar,Ist Main Road,Jallahalli,Bangalore-560013,India
Contact Details:+91-9739180646
Email Address: [email protected]
Date: 02/ 12/ 2014
Hi,
I am a Software engineer with excellent academics and 8.9 years of industrial automation engineering experience in engineering and commissioning of various Poultry Feed Plants. Being specialized in for PLC (Siemens-S7-200, S7-400 and Schneider M340) and Labview2010 programming.I have enclosed my resume that will provide you with proper details about my educational background and work experience.
I am currently working at (Indian Industrial Machines Pvt.Ltd, Bangalore, India) and have gained a valuable experience here as a senior SCADA Developer. I am fluent with VB6.0, VB.Net, Labview2010 and PLC. This matches up with the requirements for the post in your organization.
I would like to meet you and discuss on this more. I would be glad if you could tell me when and where we can meet. I can be contacted at (+919739180646 ) or email me at ([email protected] or [email protected]).
Thank you so much.
Sincerely,
Anoop Kumar.k.v
Enclosures: Resume
Attachments:
AnoopCV.doc ‏222 KB

LabVIEW software engineer in Duluth, GA

TeleDevices, LLC, located in Duluth, GA is looking for a LabVIEW engineer with some digital hardware design background to join its team. The candidate will do most of the software development and contribute to overall system design and architecture. Occasional travel may be required.
This position is for full-time employment and work must be performed at TeleDevices' Duluth location. Relocation assistance is not guaranteed, but may be available. Competitive employee benefits.
Qualified candidates will have:
Minimum of 3 years experience with developing LabVIEW based applications
Bachelor's degree in engineering
experience with basic test instrumentation, such as NI-DAQ and NI-DMM measurements, GPIB communication, etc.
legal permanent residency (green card)
Qualified candidates preferably have:
Bachelor's degree in electrical engineering
experience with digital hardware design
CLD certification preferred
Experience with TestStand desirable
Experience with image processing is a plus
US citizenship
If interested, please forward your resume and salary expectatiopns to Jackie Edwards at [email protected] Qualified candidates will be contacted by TeleDevices, LLC.
Please do not contact me or post your resumes here, as I am doing this for my customer. Send questions and resumes to the email address above.

Dear Sir,
I Amit Amrutkar have completed B.E. Instrumentation & Control Engineering.
Currently, I am working with VI Automation, Pune on LabVIEW, PLC development, NI products system integration from July,2010 to present.
I have attached my CV herewith. Please look into the same and revert back if my profile is matching with your current requirement.
Looking positively.
Amit Amrutkar
Attachments:
Sr.Automation Engineer with 1.9 yrs exp.doc ‏124 KB

Job Opening for Test Engineer in Novi-Michigan

Hi all,
Harman International Inc., is looking for a Test Engineer to add to our Team.
Job Location: Novi, MI
Job Type: Full Time / Permanent
Job Description,
Knowledge in electronic design for testability requirement.
Knowledge in LabView/TestStand/Process Model test development platform.
Able to develop testing tools (including but not limited to communication protocol tool, driver interface either for specific product, device and/or instrument etc) in LabView/TestStand environment via VB, DotNet or other interfaces as appropriate.
Able to develop, debug and implement manufacturing test SW package based on test spec & test requirement for optimized production test quality control and efficiency.
Knowledge of measurement statistical analysis for production support.
Experience: 3 - 8 years.
Please send me Private Message (PM) for the contact details to send your resumes.
Thanks
Vijay

But he did put to contact him with the forum's Private Message feature. Now he might not know what that means (it is the little envelope icon to the right side of the blue bar with your own "name". Or clicking on the OP's name will get you to a point where you can send a message.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Job Opening - LabVIEW (Bangalore & Noida Location)

Looking for Labview certified candidates with 2-3 years of experience for Sankalp semiconductor, Bangalore Location and 3-5 years of experience for Noida. Relevant candidates can mail your updated profiles to [email protected]

Madam,
I am extremely delighted to know that there is a demand for LabVIEW programmers at your firm.
I am an electrical engineering graduate with my final year project on LabVIEW. The title was "REMOTE MONITORING AND CONTROLLING OF HOME APPLIANCES VIA INTERNET USING LabVIEW"
If you are interested me and my batchmate who is also an enthusiast is most ready to brief you our project and you can hire us on satisfaction.
We are extremely interested in LabVIEW and hope to receive a positive reply.
Regards,
Abhishek Sreekumar, Manoj M

Software Engineer, Austin, TX

NovaCentrix is looking for a skilled LabVIEW Software Engineer for full time employment. NovaCentrix is based in Austin, Texas, and enables advanced products in solar and printed electronics markets through their advanced photonic curing tools and conductive inks.
Responsibilities:
Design and develop LabVIEW applications related to user interface, data acquisition, and instrument control
Design and develop LabVIEW based automated test systems
Support global customer site installation and maintenance
Requirements:
Degree in Electrical / Computer / Mechanical Engineering or equivalent
2+ years programming in LabVIEW, preferably a Certified LabVIEW Developer
Experience in UI design, data acquisition, instrument control, and object oriented programming
Strong interpersonal and communications skills
Please email resume to [email protected]

Hello Ere,
Can you send me your contact email to send resume

Interview with a software engineer

Hello
My name is Shawn, I am a high school student in junior year and we are doing a project where reach out to a individual who's profession is the field of work that we are most interested in. I myself am very interested in software engineering and would hope
someone wouldn't mind if I were to ask them a couple of questions about their job as a software engineer. I would greatly appreciate the help.
Thank you

Jason Baker, known in the community asjbakervt, works as a help desk and systems administratorat the Burlington Electrical Department (BED) in Burlington, VT. On the side, Jason maintains his own IT consulting firm, has a family, and manages to make the most of Vermont (proof: when I called, he told me he had been up in the mountains over the weekend).
When we found out thatJason, the SpiceHead who's in charge of theVermont SpiceCorps, worked for a power distributioncompany, we had to learn more. How many surge protectors does he use? If the systems go down, does the power go down? How do you update the power grid? Does he have any Internet of Things smart sensors lying around? And what does IT's energy bill look like when you're the ones in charge of the power?For a full audio recording and podcast of our interview with Jason, see...
This topic first appeared in the Spiceworks Community

LabView Control System Engineer Job Opening - Seattle

LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an
opening for Software Controls Engineer. Seattle Safety designs,
manufactures, and installs advanced crash test sled systems that are
used in automotive and aeronautical industries. The duties of the
Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad
in subject matters concerning performance, installation, and
maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Beginner-to-intermediate knowledge of LabVIEW.
Passing understanding of binary logic.
Familiarity with at least one low-level programming language (Assembly, C, COBOL, etc)
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software
maintenance and version management. Experience with source
configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis,
systems analysis, digital filtering, and both linear and non-linear
signal processing.
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
John Covey
(253)395-4321
822 3rd Ave S
Kent, WA 98032
[email protected]

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

High-Level LabView Control System Engineer Job Opening - Seattle

High-Level LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Senior Software Controls Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis, systems analysis, digital filtering, and both linear and non-linear signal processing.
BSEE, BSME or BS Physics may be a good fit, but not limited to these areas.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
Tom Wittmann
(253)395-4321
1222 6th Av N
Kent, WA 98032
[email protected]
Attachments:
ServoSled Brochure.pdf ‏1215 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Job Opening - Software Engineer Silixa Ltd, Elstree London

Job Opening - Software Engineer Silixa Ltd, Elstree London - Please see at the job description attached
Attachments:
Silixa_Software Engineer_March2011.doc ‏84 KB

Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

LabView Software Programmer Job Opening - Seattle

LabView Software Programmer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Software Programmer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Software Programmer include:
Work with current team members with varying levels of LabView to restructure existing crash test software and to do so in such a manner as to ensure each are able understand and work with code.
Supports all aspects of software application design, development, testing, deployment, and support.
Analyze the current and future needs of the software in order to properly select the type of architecture and structure best suited for the new application.
Perform software testing at a unit and integration level to ensure expected behavior.
Comments code clearly and consistently throughout the development process.
Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
Troubleshoot and repair any functional software bugs that may arise.
Investigate opportunities for system improvement through new software approaches.
Furthermore, the ideal candidate would possess the following skills:
Expert knowledge of LabVIEW.
Passing understanding of industrial controls.
Familiarity with a minimum one low-level programming language (C, C#, VB, Ladder, etc)
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated feedback control systems.
Experience with LabVIEW RTOS and PC Real Time Computers
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Porsche ServoSled facility near Stutgart Germany

Job is open again, see updated description here.
Please note at this time we are NOT accepting applications from outside the US.

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Job openning for Labview developer with fiber optical experience

job openning for Labview developer with fiber optical experience

I am a Test Engineer with 10 years LabVIEW experience, as well as TestStand, VB6, C, Assembly language, programming
also experienced with electronics/hardware, and a talented problem solver
I worked for CIENA Corporation writing automatic testing software for their fiber optic products (DWDM)
Available due to plant closing
please contact me at [email protected]
thank you

Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

We've are looking for a staff software engineer to join our company in Boston, MA (near downtown). We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years. Every year we release a new version of the software with significant new features. An engineer with our company needs to be more than just a LabVIEW hacker. We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification. We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
- coupling and cohesion in software design, how this relates to design paterns such as action engines
- software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
- Object Oriented design
- importance of documentation, importance and use of source code control
- pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
- tradeoffs of various file formats in terms of flexibility for future software changes
- FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
Formal job ad is below:
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
Programmer for Audio Test and Measurement software - Boston
Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
This position reports to the Software Manager. Duties include, but are not limited to:
Programming in LabVIEW
Designing and coding new Sound Measurement and Analysis software
Improving, reviewing and de-bugging existing code
Preparing internal and user technical documentation
Testing code
Interfacing with management, sales teams and customers to define tasks
Required skills / education
Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
Strong background (4+ years) in programming with 1+ years in LabVIEW.
A methodical approach to coding, testing and documentation
The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
Experience in acoustic engineering is a plus. Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
About Listen
Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

we're interviewing candidates, but, this position is still available

Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic. If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help. Thank you very much! -Nick
Nicholas Ricchiuto
B&V Stafffing Inc
724-933-5218
[email protected]
ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

Please post this to the LabVIEW Job Openings board.

Job Opening - LabVIEW Software Engineer

Similar Messages

Maybe you are looking for