Job Openings At Honeywell Automation India Ltd., Pune

Honeywell India Automation Ltd, Pune is currently looking for Sr. LabVIEW Engineers on a Permanent basis.
Job description is as follows:
Required Skills:
•Candidate should have 4+ years of experience in LabVIEW. Should be familiar with various NI toolkits and add-on modules.
•Candidate should have implemented various protocols such as RS-232, GPIB, MODBUS, Ethernet, Device net using LabVIEW language.
•Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, DAQ, cDAQ etc)
•Must be able to work with our global clients.
•Ability to work independently with our clients
•Should be good in debugging exciting code.
•Candidate should have good communication skills, presentation skills and interpersonal skills.
Niche Skills:
•Knowledge of Project Development Life Cycle
•Successfully completed various NI Certification exams (CLAD / CLD / CLA)
Added Advantage:
•Ready valid passport / VISA will be a plus point. Candidate may have to travel abroad depending on project requirements.
•Shorter joining period.
If you think you meet these requirements, please drop me an email with your resume,Current CTC, Expected CTC and Notice Period and contact information to: [email protected], [email protected]
Thanks,
Avni Vyas

TO
HR Manager
I have an enough knowledge about my core subject and skills to secure the job.
I completed B.tech in discipline of  Electronics and Communication Engineering.
I completed my PG Diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN.
I trained concepts on LAB-VIEW, SCADA DCS  RS-232 ,Fieldbuses And all plc programming (ab,abb,Siemens)
Please find the attached RESUME
I look forward to hearing from you soon.
Sincerely
                                             Thanking you     
                                                              DANDUPROLU YASWANTH ANIL
Attachments:
RESUME_YASWANTHANIL D.doc ‏41 KB
RESUME_YASWANTHANIL D.doc ‏41 KB

Similar Messages

  • Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

    Job Openings at Honeywell Automation India Ltd., Pune
    Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
    Position -Permanent
    Job Location: Pune,India.
    Job description is as follows:
    For Senior Labview Test engineer Position: (4-6 years)
    Primary Skills:
     • Should be an expert in NI Labview.  
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
    • Experience on hardware test automation using NI and third party hardware
    • Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
     Niche Skills:
    • Knowledge of Project Development Life Cycle
    • Experience in NI Teststand/ LabWindows
    • Good Communication Skills
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLD (certified labview developer)
     Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate to Pune
    For Junior Labview Test engineer Position: (2-4 years)
     Primary Skills:
    • Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
    Niche Skills:
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLAD (certified Labview associate developer)
    Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate toPune,India
    Please Forward your updated profile to [email protected]

    Dear Sir,
    With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
    I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
    If you need further information regarding my candidature please do write/call me.
    Thanks & Regards
    Rushikesh P. Deogade
    Nagpur, India
    Ph.:- +91 9923858523
    Attachments:
    B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

  • Job Openings At Kimaya Automation​, Pune

    Kimaya Automation, Pune is looking for Two (2) Sr. LabVIEW Engineers
    Job description:
    Must Skills:
    Candidate should have 1-2 years of experience in  LabVIEW Should be familiar with cRIO.
    Should be familiar with NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    Must be able to work on site globaly. 
    Ability to work independently for coding, testing, Installation & support
    Should have good communication skills, presentation skills and interpersonal skills.
    NI Certification exams (CLAD / CLD / CLA) Must
    Added Advantage:
    Immediate Joining ( 1 September 2013)
    If you meet these requirements, please drop an email with your resume -  [email protected]
    Regards
    Kaustubh

    Hi sir,
    Please find my attached resume.
    I am working as a labview design engineer at TMCS Pvt Ltd for last 3 yeays and 6 months.
    I have varied experiance on NI hardware and LabVIEW.
    I am currently looking for a jb change.
    Hoping for a quick responce.
    Regards,
    Hrishikesh Kelkar
    Attachments:
    Hrishikesh Kelkar.docx ‏33 KB

  • Openings at VI Automation Pune, India

    VI Automation is based in pune, India.
    We are one of the fastest growing channel partner of Ni Systems, Bangalore.
    We are maily working on PC based Systems, Vision, PLC and SCADA.
    We need LabvIEW Developers and Marketing Engineers.
    Please find out the company and apportunities at VIAPL on
    http://www.viapl.com/
    http://www.viapl.com/careers.htm
    Kaustubh
    Managing Director
    VI Automation (P) Limited, Pune
    Mb: +91 99606 44455

    Hello sir,
    I have completed  my M.Tech in Measurement and Instrumentation at IIT Roorkee in the year 2008.
    My Dissertation topic is "Automation of Guest House Building".In my work i have used  LabVIEW as Main tool for monitoring and control of various parameters.I have worked on LabVIEW  around 9 Months.
    I am interested to settle my career  in Instrumentation field. 
    I have attached my resume.
    Regards,
    G.Santosh,
    +919177423642
    Attachments:
    Santosh_cv.doc ‏43 KB

  • Job Openings - NI Alliance Partner ~ New Delhi, India

    Company Profile-
    Nexus Engiconsults Pvt Ltd is a system integrator and custom solutions provider in the field of test & measurement and automated control, through intuitive software development on the NI LabVIEW programming environment. Nexus engiconsults is a rapidly growing and dynamic engineering firm that provides systems integration services through smart, efficient, cost effective solutions to a diverse set of clients, some of which are global leaders of their respective domains. Our broad range of expertise, ranging from data acquisition, software testing, circuit design, signal processing, machine vision, condition health monitoring enables us to facilitate the best solutions at various Research & Development, Quality Testing, Production Line Control and other vital departments of an industrial or academic organization.
    Job openings-
    This is your opportunity to showcase and innovative your software capabilities to our dynamically growing organization. We are looking for people who are passionate and possess a keen desire to learn.  You must be resourceful, possess problem solving skills and able to overcome new challenges using innovative approach. He or she must also be able to perform with minimal supervision and deliver solutions to our customers on schedule.
    Requirements-
    Ability to work independently as well as a team player.
    Effective interpersonal and problem-solving skills.
    Ability to work in a fast paced environment and contribute to multiple projects.
    Ability to rapidly absorb new concepts and apply them effectively.
    1. Assistant Systems Engineer (0-1 years of prior experience)- 
    Responsibilities-
    Develop custom software using LabVIEW.
    Develop optimized test solutions for unique applications.
    Interface with clients to provide solution and support. 
    Academic Qualifications
    Bachelor’s degree in Electrical or Computer or Electronics/Instrumentation Engineering.
    Proficiency with Programming at Intermediate or college level. (LabVIEW, C/C++, Java, etc)
    60% Marks in Class X and XII.
    2. Systems Engineer- (1-2 years of prior experience)-
    Responsibilities-
    Designing application software on NI LabVIEW.    
    Designing custom solutions through NI LabVIEW interfaced with NI hardware.
    Design and assemble test systems, integration with hardware,sensors/actuators.
    Guiding and working in sync with Assistant Systems Engineer for timely completion of task.
    Academic Qualifications
    Bachelor’s degree in Electrical or Computer or Electronics/Instrumentation Engineering.
    Proficiency with coding at Intermediate or college level. (LabVIEW, C/C++, Java, etc) with 1-2 years of prior experience in coding. LabVIEW experience preferred.
    60% Marks in Class X and XII.
    3. Project Manager-
    Responsibilities-
    Leading a project/multiple projects right from its conceptualization to completion.
    Precise understanding of client requirement and effective incorporation in offered solution in most efficient and cost effective way.
    Exellent Technical expertise and hands on experience in electronics/instrumentation/software development/engineering physics for over all project responsibility.
    Ability to work in a team and effective leadership skills to guide and review fellow team mates/engineers.
    Academic Qualifications
    Bachelor’s degree in Electrical or Computer or Electronics/Instrumentation Engineering. 
    4-5 years of effective experience. (Experience on NI Harware/NI LabVIEW programming preferred.)
    Please mail to : [email protected]  (For Assistant Systems Engineer positions, download and complete the attcahed form and send it through mail)
    Attachments:
    Information form.docx ‏168 KB

    Dear Sidharth,
    This mail id is couldn't be send details from my side, do you have another e-mail id.
    It'll came like this,
                Delivery to the following recipient failed permanently:
                Technical details of permanent failure:
                DNS Error: Address resolution of nexusengiconsults.com. failed: Domain name not found
    Thanks & Regards,
    SABARI SARAVANAN M
    Certified LabVIEW Associate Developer

  • Job openings

    hi all,
    Good day...
    I have seen lot of friends here asking how the oracle dba work will be..how to get junior dba position..Guess here all the Guru's are holding a senior or director level position in their organization..It will be greatly helpful for us if we know the job openings...Not sure if i can ask this question in discussion forum..Yet i posted it..Apologies...
    thanks,
    baskar.l

    Hi baskar;
    I have seen lot of friends here asking how the oracle dba work will be..how to get junior dba position..Guess here all the Guru's are holding a senior or director level position in their organization..It will be greatly helpful for us if we know the job openings...Not sure if i can ask this question in discussion forum..Yet i posted it..Apologies...
    This forum uses by many user which are senior,junior,newbee,developer etc.. By the way you can send below links to your friend which want to become dba or dba can earn good or this job is better than other.Please follow below and see its helpful:
    Is it worth to become a dba
    Re: Path to become a DBA
    Re: Wants to become a DBA
    Regard
    Helios

  • Closed Job openings, still show up in Careers page

    Hi-
    We have an issue with closed job openings, still show up in the careers page in HCM 9.2 with tools 8.53, Can you please let me know if its a setup issue or any job that needs to be run to clear up the careers page with only active job openings?
    Regards,
    DMAC

    in Mail go to window menu->previous recipients and delete the ones you no longer need.

  • Jobs and Tasks for Automation of load data in Essbase ASO Cube

    Hi, all people,
    my question is about creating jobs or tasks for automation loading data in essbase cubes.
    I use .bat file witch run MaxL script for loading data form oracle database into an essbase cube. For running .bat file is made a Windows Task.
    Is there any other opportunities to run .bat file not using windows tasks? Maybe there is special utilities in Oracle EPM Systems or any other.....
    I am using essbase version 11.1.1.2.0.
    Thanks for reply))

    There is no internal scheduler.You either have to use Windows Scheduler, Unix Cron or a third party tool. Take a look at Star Analytics Command center, it is designed specifically for Hyperion applications http://www.staranalytics.com/products/command_center.htm

  • Deleting old job openings

    Laura,
     Because a lot of people are apparently unable to read and understand a calendar, would it make sense to just delete job openings that are more than a few months old.

    Hi Dennis,
    My current way of handling that board is to wait until the person that created the post notifies me and then I delete it.  However, not everyone knows how to notify a moderator.  Perhaps I could put a note in the announcements or create a thread and float it to the top of the board with best practices for the board.  It probably wouldn't eliminate the fact that people don't always read the announcement, but it may help the person posting the thread to know that we can take it down for them.
    Even better - I can add a disclaimer that threads may be deleted after a certain amount of time at the moderator's discretion.
    Thanks for the feedback!
    Laura

  • Job openings for Netweaver consultents

    hi,
    can any one please let me know how the market situation for SAP Netweaver Consultents [EP] in US.
    thanks in advance,
    rahul

    Hello Rahul,
    refer to this link .Here you will get all the job openings and analysys of market.
    http://www.itjobswatch.co.uk/
    Warm Regards,
    Rakesh Kumar Verma

  • Calling LabVIEW professionals!!!! Job openings at Captronic Systems Pvt. Ltd!!!

    Captronic Systems Pvt.Ltd (CSPL) Largest alliance member of National Instrument in India and an ISO 9001:2000 certified company has massive expansion plans. As a part of the plan CSPL is looking for experienced LabVIEW professionals for abroad projects for onsite work in US and Germany.
    Interested candidates can apply to [email protected]
    Please do not apply by replying to this e-mail.
    CSPL is also setting up a huge infrastructure in Marathahalli, Bangalore.

    Dear Sidharth,
    This mail id is couldn't be send details from my side, do you have another e-mail id.
    It'll came like this,
                Delivery to the following recipient failed permanently:
                Technical details of permanent failure:
                DNS Error: Address resolution of nexusengiconsults.com. failed: Domain name not found
    Thanks & Regards,
    SABARI SARAVANAN M
    Certified LabVIEW Associate Developer

  • Oracle application job openings for Diploma holder

    Hi All,
    I am not sure whethe it is right place to put this query, but still trying to know the reply on following.
    How are the job opening for non IT Diploma holder ( India, Maharashtra), with 7 years of manufacturing process experience. Also have Oracle apps end user experience ( 3 yrs).
    If I undergo Oracle 11i functional track training how easy will be the entry in core IT service companies. ( apps implementation). Which are the companies opting for such profiles?
    Please guide. Thanks in advance.
    Anand

    Most of the companies nowdays as for atleast a degree, though i agree mostly its not required since you have all the skills required, but you really cant help it.
    Sam
    http://www.appsdbablog.com

  • SAP XI 3.0 job openings

    Hi..I am currently in search of a XI 3.0 job in the US. Please let me know if any of you are aware of any openings anywhere in the US.
    Thanks,
    Kate.

    Kumar,
    Yes. Adapters run on the J2EE server of the SAP Web Application Server 6.40, which contains a JCA 1.0 framework. The J2EE server meets all the requirements set out in the J2EE Connector Architecture Specification, Version 1.0.
    For more information on JCA, kindly check the following link:
    http://help.sap.com/saphelp_nw04/helpdata/en/00/6e6040a64e8437e10000000a155106/frameset.htm
    Also go through this threads which will help you:
    JCA Adapter
    JCA Adapter
    library referenced by my JCA Adapter
    problem with JCA compliant adapter in XI
    Hope this gives you some idea......
    ---Satish

  • Job Opening at Moog Bangalore, India

    Hello Friends,
    Moog Aircraft Group, Bangalore is looking for LabVIEW and TestStand Engineers with 2 to 5 years of experience in test automation field.
    Please find the job description as mentioned below. If interested, please send the resumes to [email protected] or [email protected].  
    For more information regarding company and its product profile, please visit us at www.moog.com\aircraft
    Job Description Is As Follows:
    Candidate should have 2 to 5+ years of experience in using various NI tools such as LabVIEW and TestStand. Should be familiar with various NI toolkits and add-on modules.
    LabVIEW and LabVIEW RT\FPGA proficiency (Desirable certifications include CLAD, CLD, CLA).
    Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    Design, Development and Configuration of Automated Test Equipment (ATE) for complex systems\sub-systems, simulation and control system environments
    Must be able to work with our global clients and lead the team.
    Ability to work independently with our program focals for gathering requirements, preparing various test plans, coding & testing, Installation & support
    Ability to understand the system and propose the custom signal conditioning circuitry to hardware team. Should be good in debugging hardware.
    Candidate should have good communication skills, presentation skills and interpersonal skills.
    Knowledge of Project Development Life Cycle
    Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    Exposure to Avionic Communication Protocols is an added advantage (ARINC, MIL1553) dSPACE®, Python, Matlab® \ Simulink® knowledge is an added advantage.
    Aircraft systems/sub-system testing verification and validation environments.
    Knowledge of Aircraft Actuation systems is an added advantage Process Standards (D0-178\CMMI) is an added advantage.
    Ready valid passport / VISA will be a plus point. Candidate may have to travel abroad depending on project requirements.
    Regards,
    Karthik SP

    Hello Sir,
    I am AV Seshagiri Rao a CLAD from hyderabad with a hands on experiance of Developing LabVIEW applications for various NI products for 2 Years. i am very much intrested in Moog. i have attached my Resume please kindly intimate me if any opening.
    AV Seshagiri Rao
    Email: [email protected]
    Ph: 09703339903
    Attachments:
    resume.seshu.docx ‏47 KB

  • 4 job openings in Houston, TX

    Infodat in Houston currently has 4 openings for immediate hiring for the following:
    Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications.
    Infodat’s major areas of focus and delivery are:
          Tests & Measurement
          Data Acquisition and Control
          Process Automation
          Mobile Technology
          Web-based applications
    For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
    All inquires will be held in strict confidence.

    Thanks,
    I was looking for Oracle Apex position anywhere in States...
    regards,
    Kumar

Maybe you are looking for