Job Search in E-Recruitment not working

Hi,
An error message is getting dispalyed when "Job Search" link is clicked. It is throwing a big dump with the heading "Error when processing your request".
Not able to figure out the exact reason
Employee start page>Employment Opportunities>Job Search

Hi,
I would suggest have a look at the table in spro --> personal management --> recruitemnt --> basic settings --> maintain search help
also
spro --> sap e recruiting --> tech settings --> sap ecc integration --> setup integration with OM
These should solve your problem. We were facing a similar problem.
Also, you can refer http://help.sap.com/erp2005_ehp_03/helpdata/EN/51/d8c041f123c717e10000000a155106/frameset.htm
Cheers,
Rahul.

Similar Messages

  • Search and Address bar not working.

    Hello, I have this problem were whenever I try to type in something into the search or addresys bars, nothing happens. It's like the enter key isn't working. There is not usual picture next to the search bar (the one that shows you what search engine you're using. If it's google it shows a "g" next to the bar). Instead there is just a picture of a blank page as a placeholder. When I try to go in and add a new search engine by managing the search engine list, there is no option to add a new search engine. I have already tried going into the firefox folder on my computer and deleted the formhistory.sqlite file that is the supposed problem. No avail. I have even gone so far to delete and reinstall firefox to my computer. Well, that didn't work either. So I waited until the next update to see if my problem would be fixed THEN. I am currently on firefox 19.0, which is, as of writing, the most current version. I have tried restarting firefox with all addons removed. And for good measure, I deleted anything that ended with ".sqlite" in my firefox folder. I have tried to get the the about:config menu but do not know how considering how my address bar refuses to search. The greatest thing is that my address bar can still remember all the sites I've typed into it before, but for some unknown reason, cannot take me to any of them! I really don't know what to do next. I can only suppose that I could try completely deleting everything firefox has stored on my computer, as I don't know if just uninstalling the program actually did that. Other then my search bar problem, firefox has been acting fairly normally besides a few minor hiccups here and there. I am trying to remember if I downloaded anything before my search bar problems started or not, but it is always a possibility. I did download the firefox beta for windows 8 metro mode but I can't remember if that was before or after firefox started acting up. It's possible considering that softonic thought they were being really nice by including fbdownloader for free with my firefox metro browser. I am now no longer using softonic ever again. But that's all the evidence I can think up right off the tip of my head. Sorry if this was kinda long, and if any of my description isn't clear or make sense please ask and I can try to verify. Also, if I haven't said this already, my search bar is only not working in firefox. Chrome, Internet Explorer, and Safari are all working fine. Just my luck, I guess. If anyone could help me out, I'd be much obliged. Not being able to use the address bar has been really inefficient. Thank you.

    This is the solution I got:
    on:
    ;-please follow these steps:
    1. Enter about:config in the Firefox location bar and press Enter.
    You should see a warning that making changes to the Firefox configuration can be potentially harmful to Firefox's integrity. Click the I'll be careful, I promise button to continue.
    2 In the Search box at the top, enter keyword as the search term. You should see a few remaining items, one of these is keyword.URL. It should be bold.
    3 Right-click on the keyword.URL setting and select MODIFY from the dropdown menu.
    enter your favorite search engine
    In my case
    I entered
    https://www.google.com/search?q=
    And that was a super fix
    for more cool stuffs like [http://example.com website Alexa ranking ]

  • I just bought an iPhone 4s. Now the search iphone function is not working. When I swipe the screen to the left, the search box appears but when I type what I want to search for, there is no action. Please help.

    I just got an iphone 4s. Now the search iphone function is not working. When I swipe the start screen, the search box shows up. But when I type what I want to search, there is no action. Please help.

    Try this...
    You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...

  • Data Services- The job server you selected is not working

    Long Text:
    After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
    Latest Software version -BODS 4.0 SP2
    Reproduce Steps:
    1. Double click on the Project from repository, it will display the project in Project area.
    2. After that it will display all the jobs under the project.
    3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
    Here the we can the default Job Server has been selected.
    4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

    Hi
    Please contact your Data services administrator to check on the server why the job server is not working.
    There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
    And let us know the exact issue.
    Regards
    Puneet

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • The Help Tab (OSX ML) where you search for something does not work

    If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
    I am on the latest version and on CC

    Hi Peter
    Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
    Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
    RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
    Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
    Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
    Could maybe somebody test this, too, and post here whether my conclusions are really correct?
    Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
    Can hardly wait to see your feedback; thanks again for everybody's support!
    Kurt

  • Resume Keyword Search in iRecruitment is not working or fetching any record

    The following notes in the MOS did not resolve the issue.
    How does Keyword Search Work in iRecruitment? (Doc ID 732817.1)
    Candidates Keyword Search Function is Not Working in iRecruitment (Doc ID 286502.1)
    Find Candidates and Resume Search Functionality in Oracle iRecruitment (Doc ID 1069297.1)
    Resume Keyword Search On Candidates Returns No Rows (Doc ID 330512.1)
    Checklist to Search Resumes in iRecruitment (Doc ID 401364.1)
    Why Does Resume Keyword Search and Document Preview not Work in iRecruitment in Some Platforms? (Doc ID 466991.1)
    Bug 6264742 - APPSST10203: IRCTXIDO1.SQL FAILS BECAUSE OF INSO_FILTER
    What could be the Cause? Any guidance on how to debug the issue.

    You can easily get it from
    About this page -> Business Component Reference Details -> View Objects
    You can analyse these View Objects Query and can get Table Name.
    Thanks

  • Search menu function is not working

    Hi
    Search menu function is not working in one of my HRMS 9.1 (PT: 8.52.09 application.
    Verity installed and executed the build registry search index aswell.
    Please let me know if I miss something on configuring the search menu function.
    Thanks
    Soundappan

    Personally I did not have to make any psappsrv.cfg changes for this particular 9.1 env or any other changes that I can remember. Is PS_HOME = PS_CFG_HOME though?
    If you didn't specifically set PS_CFG_HOME to PS_HOME it defaults to something like $HOME/psft and the files would need to be there instead.
    If you run psadmin what's it show as the Config Home?
    If I unset PS_CFG_HOME i get
    PSADMIN -- Tools Release: 8.52.07
    Copyright (c) 1996, 2011, Oracle. All rights reserved.
    PeopleSoft Server Administration
      Config Home:  /home/psoft/psft/pt/8.52And the files would need to be there rather than $PS_HOME/data/....
    Now you could override that in your psappsrv.cfg file with
    EMPLOYEE=PS_HOME/data/search PS_HOME I dont think can be used here as a variable... it needs to be the full path. the location here must lead directly to the EMPLOYEE directory
    In 8.52 there are also some alternatives to this older style above.
    See this peoplebook for 8.52 http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tsvt/book.htm?File=tsvt/htm/tsvt10.htm%23g037ee99c9453fb39_ef90c_10c791ddc07_102b for details.
    In the past I've used shares or nfs mounts to have the process scheduler write directly to the appserver. But you could check out the new search server option too.
    Let me know.

  • Lion 10.7.1. Searching on iCal does not work

    I have Lion 10.7.1. Searching on iCal does not work. Also, I tried searching form the  spotlight search , it does not retrieve calendar entries. Note: my calendar files are on an encrypted disk image (but I enable the disk image , I can see the calendar).
    Any advice ?
    Dag

    I have been searching for an answer to this problem for about 6 months.  I took it to 2 genius'! Neither could find the problem and suggested I completely wipe my hard drive and reinstall all the software.  There ahs to be another way!

  • No result with Job Search in E-Recruiting (WD ABAP)

    Hi all,
    we're using E-Recruiting 6 Enh. Pack 3 and WebDynpro Abap for the services
    available to external candidates, but we have the following problem:
    the Job Search (free text or criteria) always returns no result even if the T-Rex works
    correctly testing it via the transactions on the backend (it gives the result we expect).
    Any idea about what we missed?
    Thanks in advance, kind regards.
    Angelo

    Hi,
           We are facing a lot of problems in the search application as well. We have defined our own customised search jsut like first name and last name.
    It is giving wierd results. Can you please tell us the links or hints where can we look into this to rectify this..
    Thanks a lot

  • Mail search with attachments is not working

    After installing Lion, Mail search is not working anymore with attchments.
    It was perfectly working before.
    Tried to rebuild spotlight index
    Tried to delete envelop_index file  
    It was really useful for my job.
    Thanks.
    Paolo

    Same problem here! Quite annoying!
    No solution so far. Opened a case ID at apple care to find a solution for that.

  • Search function in Help not working in any application

    The Search function is not working in any application's Help. Upon entering the terms I need help for I get a hang at "Searching..." but never any result. This problem started sometime in the last year or so. Prior to that the search function in Help worked fine. My network connectivity is excellent.
    I recently reinstalled OS X 10.5 but I'm sure the problem existed before that and persisted after the reinstall.
    The reinstall was due to upgrading to 10.7 and only then finding that I had lost needed functionality, but I don't think this has anything to do with the current problem. All other aspects of Help seem to be working fine
    I don't find any reference to this problem anywhere so I'm hoping someone can help with my Help(!) problem. Thanks in advance.

    Try running your Leopard install disk again, as well as the 10.5.8 combo updater. This might reinstall any 'missing bits'.
    You can do this without deleting the hard drive, just install straight over your existing system, but close all applications and external devices first.
    Or you could also do this via an Archive and Instal:
    How to Archive & Install:
    http://support.apple.com/kb/HT1710
    and this also:
    http://support.apple.com/kb/HT2196?viewlocale=en_US
    This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
    http://docs.info.apple.com/article.html?artnum=25404
    BUT: Don't install older versions of Mac OS than what came with your computer:
    http://support.apple.com/kb/HT2186?viewlocale=en_US

  • Search criteria drop down not working in CRM 7.0 Web UI for few users.

    Hi Gurus,
    i have come across problem in sap CRM 7.0 web ui,
    it goes here....
    when a user opens a webui page and goes to "account management" work center page under "search" work center link group... he selects "accounts"(or contacts or account plan)... there in search criteria fields..(account id,role,country etc ) drop down list is not working for him...he can only see only which is maintained as default but if wants to change it by drop down list selection it is not possible...for me it is working ..can u please suggest what is missing in his case..?
    if it is authorization issue please tell which object should i check..?
    Thanks,
    gaurav

    Hi,
    Please check if the user is assigned to a Business Partner.If not then assign the User to a Business Partner and check.
    Regards.
    Deepak Ramchandran.

  • Search in Time Machine not working

    I am trying to access my Library in Time Machine. Ive done the "command" "shift" "g" then ~/library with no luck, seems like the search itself is not working at all. Im trying to retrieve a specific file from time machine..please help

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • Search in ADF does not work

    Hello.
    I have created a search form with two iterators one for the results and the other for the search criteria. The search form works as expected. The name of the view that i am using is "MasterPartyView1". When i execute the following code
    ViewObject voMasterParty = appMod.findViewObject("MasterPartyView1");
    voMasterParty.setWhereClause("Id = " + MasterPartyId);
    voMasterParty.executeQuery();
    Row rowDest = voMasterParty.first();
    in a backing bean and i go to the search form the only result that i a have is the row that i found in this statement (voMasterParty.setWhereClause("Id = " + MasterPartyId);).
    Why is that?The adf search does not go every time in the database to fetch rows?
    the only workaround for the moment is that i put these two extra lines in the backing bean
    voMasterParty.setWhereClause(null);
    voMasterParty.executeQuery();
    which is not correct because i am fetching all the rows from the database i think.
    Thank you in advance
    Periklis

    Frank thanks a lot for your answer but i still have some questions.
    1 question: One workaround that i found is to the search with the view named MasterPartyView1 and have another instance of the view object(MasterPartyView2) in order to perform the custom search(setwhereclause).This seems to work. Is this approach correct?
    2 question: if i understood correctly you say that both iterators point to the result set of the query (one row) and such is not possible to find other rows. But in the search form there is an invoke action
    <invokeAction id="AlwaysInFindMode" Binds="Find"
    RefreshCondition="${bindings.MasterPartyView1SearchIterator.findMode == false}"/>
    that to my understanding puts the iterator in Find mode, thus making the input text fields available for criteria again. So the search iterator now points to QBE and it is possible to iterate over a collection of QBE criteria rows. is this correct?And if it is why it does not work as expected?Why it does not bring other results?Why the iterators (the seach iterator and the results iterator) still point to the newly created result set?
    Thanks in advance
    Periklis

Maybe you are looking for

  • Restoring Application from Time Machine

    Yesterday, I downloaded XCode 4.1 from the Mac App Store. Shortly after using the installer to install XCode 4, I decided to delete the installer. I now regret this and I find that it may be useful to keep a copy of the installer around. Since Lion h

  • Any way to get number of active sessions

    Hi,           With the deprecation of the HttpSessionContext interface as of Servlet API           2.1 for security reasons, is there any way to know how many sessions are           currently active in a given WebLogic instance?           Thanks,    

  • Problem in converting projects

    Hi, Earlier, whenver I converted .hpj to .xpj - the BMP files used in the .hpj projects used to get converted to .gif/.jpeg automatically based on the selected option. Recently, I got my hard disk changed. So, all the installations are new. Today, I

  • Windows setup could not read the XP CD

    Um little help here asap please? I ran Bootcamp and partitioned the drive, then I put my XP CD in and started the setup. But before I got to set it up, on the blue screen it says: "Setup could not read the CD you inserted, or the CD is not a valid Wi

  • Unable to find "Language and Region" link

    Hi, I am trying to customize language and region settings via my MySite using the below link. I spent an hour yesterday trying to find "Language and Region" link in the Edit Profile page, however, I could not. Is there a feature I need to activate to