Job Search profile

While attempting to fill out the "Skills Marketplace" profile on the 3rd page you encounter a "First" and "Second" choice of where you would like the job to be located. Since I indicated that I was willing to relocate and the default for "State" was "NO PREFERENCE", I left it in that setting. I did not want to specify a city or a state, but the profiler will not allow me to do that. Is this a "feature" or was the "NO PREFERENCE" option not really an option.
Also, when attempting to search under "Oracle Technology Network > Collaboration > My Forums", I constantly got an "ESI" error. I was attempting to locate information on the problem I was having with my effort to fill in the "Skills Marketplace" profile.
Any help or answers would be appreciated!
D. Schmidt
[email protected]

Hello Sameer,
this error message usually results from calling bsp application hrrcf_start_int or hrrcf_start_ext without supplying the RcfSp_Id parameter. So you probably have a wrong link which you are calling.
Check the links again using report RCF_GENERATE_URLS.
Best Regards
Roman Weise

Similar Messages

E-Recruiting 6.0: Search Profile & Search Template

Hi Experts,
I am trying to enhance and configure the Search function (which can be triggered in Talent Management or Candidate Selection Search) in E-Recruiting 6.0
Can anyone tell me the difference in config/purpose between the config:IMG->SAP E-Recruiting->Recruitment->Talent Warehouse->Candidate->Candidate Search, Search Profile and Search Template?
I read the online help and it only describe about Search Template and not Search Profile. I also check the standard system and it only displays what is configured for Search Template and NOT Search Profile.
Is the Search Profile still in use and what is the purpose if I have already configured the Search Template?
Thanks in advance.
William
Edited by: William Toh on Mar 24, 2008 6:11 AM

Hello Bill,
unfortunately the information that an internal candidate has left (or will leave - in this case the is_inactive flag will be set at the leave date via a periodical service processing table t77rcf_p_stat) can be easily seen on the databese but not in the e-recruiter applications.
I am not really sure if the employee id should disappear in candidacy table or not (customers see this different according to their attitute to rehiring people) but in general sap did not implement alot of functionalities to differ between internal and external candidates. Ok there is something for correspondence but it is not even possible to have different questionaires in the application wizard for external iand internal applicants.
In my opinion I'd assume that an employee applying on an internal position and leaving in the process is a 1 of 1000 case, as long as the process does not take eternities so I personally would not invest much effort into it. You cannot handle every special case in a system (or at leat noone pays for it) and from my experience in companies up to perhaps 2k employees, everyone in HR knows who leaves.
If you really have a strong business need in this issue, e.g. positions are published internally and once someone leaves has imedeately taken of the position you could use the the e-recruiting BAdI which is available in the BAdI implementation delivered by SAP to handle the candidate creation and stuff. You could add functionality into it that it tracks if there is a leave and the candidate has open applications and send the recruiter of the requisition an email. Other solution might be a periodical service or any other background job which checks this and destributes the information so the recruiter can take the necessary actions.
Best regards
Roman Weise

Search Criteria - job search for candidate - TREX

I need to add branches field to selection criteria for job search function( candidate pages). in standard we have
functional area,hirarchy level,country,Work contract type,Education level.
i was able to add branches successful , but when i search which branches no results .
what i have to configure to get the excepted results.
thanks in advance

When add new elements to a search mask, via customizing, you need to add that specific field also to the search profile.
In a search mask, you have the infocategory and field stored. Assign those to the search profile you want to enhance. In case of a requisition it is ERC_REQ. In case of postings INT_POER and EXT_CAND.
After doing this, you need to recreate search profiles. After indexing you will find it.

How to block a page (from a business job searching website) from appearing on my screen without me searching for it?

How to block a page (from a business job searching website) from appearing on my screen without me searching for it?

Look under:
System preferences > Network > WiFi > ( Advanced ) > DNS
System Preferences > Network > Ethernet > ( Advanced ) > DNS
There should be two or more IP addresses there.
Those addresses should be EXACTLY the ones your current ISP provided when you signed up for service. They do not start with 85 or 86 -- those are hacker sites.
If you are in the US, you could also use OpenDNS:
208.67.222.222
208.67.220.220

Sites using TALEO for job searches no longer works in 19, worked in last official 18 release

Company websites which use the TALEO job search/apply app/site, no longer work right in 19, they worked fine in 18.xx. Specially, the job search function does not work right when entering the TALEO job search parameters then hitting SEARCH FOR JOB does nothing. AN example site (which does not require registration) is https://nielsen.taleo.net/careersection/3/jobsearch.ftl?lang=en. If I make selections for JOB FIELD and/or LOCATIOn then hit SEARCH FOR JOB, nothing happends. Sites using TALEO worked fine in the last offical 18.x release. TALEO worksd fine in IE 7&Chrome 25.
Clearing the cache does not change behavior. Finally did a full FF reset--no change.
WIN XP SP3 | Dell Dimension 4600 | 1.2 G RAM

I am running Firefox version 19.0.2 and I have the same problem. I am able to filter using Internet Explorer which I really don't like. Rather than users having to figure out why this isn't working either Taleo needs to fix their scripts or a fix needs to happen in Firefox.

ICloud outage hurts my Job Search...

So, email has been down for over 24 hours, I am currently unemployed and my job search has my iCloud email on all of my resumes and job search engines, on Sunday night I submitted my resume for a few promising job leads... Monday morning I got a few replies from would be employers who asked me for a fast response... only to find out that my main connection to employers (my email) has been down for over 24 hrs... mind you, Im a Data Center Engineer by trade, and I can promise you... this is unacceptable by ANY standard... APPLE you just showed your lack of redundant services, your lack of Disaster Recovery preparation and poor Data Center operations... this excuse of
iCloud: Mail & Notes - Users Affected: 1.1% - Next Update: 09/12/2012 05:00 PDT
09/11/2012 23:49 PDT
Mail may be slow or unavailable. When Mail is available, users may experience delays with incoming messages. Normal service will be restored ASAP.
is completely irresponsible and shows a lack of respect to your users, loyal users. How do you expect new users to trust your services and move all their important information to your "Cloud".

I perfectly agree with you.
But what we agreed when we subscribed to iCloud is:
"APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT."
And there's nothing to do with it. We all agreed that Apple DOES NOT GUARANTEE anything about iCloud. You're not paying for the service, your'e paying for EXTRA SPACE. You can have iCloud FOR FREE if you want. And of you run a business using iCloud mail, that means that you didn't read the rules carefully: I wouldn't run ANYTHING of the provider says that will not guarantee the service. The rule is clear, it's up to us read it and make a choice.
I'm not from the US, I'm from Italy. This is not a US-only issue. If you run business with your email

How to find the .htm resource pages for search profiles?

Good Day All,
I am trying to customize the search page (search profiles) within UCM, i want to do that by use the appropriate .htm resource page within a custom component.
I found the checkin .htm pages and i can make changes on them and the changes are reflected on the UCM.
anyone can help me and providing me with pages name, or tell me how to thier names.
Regards.

Thanks so much for your reply.
I have the following case:
assume that i have a field on ucm named "xDepartment", and its type on ucm is Int (integer) . This filed is configured to Table-View option list, and the view have two columns (key, value). also assume that i have the following data in this view:
1: CIS
2: MIS
3: BIS
4: Enginering
5: Accounting
on search profiles, when i select a profile that have this field, the possible values that can be searched are integer and will appear From - To ; since this field is defined as integer. But the user that will search don't know the mapped value for each key, because on checkin form the values appears on the secreen.
what i want to ask is:
can we specifiy the possible search values to be the values not keys of this view. can the search values appears like what values appearch in checkin page
note:
i have an illustration image, but i don't know how to add it here on forums
Regards

How to disable options in ESS-Career and job-Skilla profile

Hi All,
In ESS-Career and Job-Skill profile,there are three are three buttons 1.EDIT SKILL,2.ADD NEW SKILL,3.DELETE SKILL.
I want to disable those options in Skills profile. Can some body please help me in solving this.
Thanks in advance.
Regards,
Thirun.

These three buttons are not configurable. You could easily modify them using NWDI and NetWeaver Developer Studio.
This is pretty much your only option to customize this iview.
If you have ESS in a track in NWDI, the Skills Web Dynpro project is under --> ess~skl. Create a project from here and open up the "Ovewview" View from the VcSklOverview Component.
From there, you just need to set the buttons to "Not Visibile"
Regards,
Tom

Error in Career and Job= Skills Profile

I have the following issue:
In the application of Career and Job=>Skills Profile. When I want add a new qualification, the system display the following message of error:
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.getNextPerspective(FcXssPcd.java:518)
    at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.getNextPerspective(InternalFcXssPcd.java:190)
    at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.getNextPerspective(FcXssPcdInterface.java:168)
    at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.getNextPerspective(InternalFcXssPcdInterface.java:160)
    at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.getNextPerspective(InternalFcXssPcdInterface.java:252)
    ... 69 more
java.lang.NullPointerException
     at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.getNextPerspective(FcXssPcd.java:518)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.getNextPerspective(InternalFcXssPcd.java:190)
     at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.getNextPerspective(FcXssPcdInterface.java:168)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.getNextPerspective(InternalFcXssPcdInterface.java:160)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.getNextPerspective(InternalFcXssPcdInterface.java:252)
     at com.sap.pcuigp.xssutils.ccpcd.CcXssPcd.getNextPerspective(CcXssPcd.java:246)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcd.getNextPerspective(InternalCcXssPcd.java:172)
     at com.sap.pcuigp.xssutils.ccpcd.CcXssPcdInterface.getNextPerspective(CcXssPcdInterface.java:135)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface.getNextPerspective(InternalCcXssPcdInterface.java:132)
     at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalCcXssPcdInterface$External.getNextPerspective(InternalCcXssPcdInterface.java:192)
     at com.sap.xss.essservices.cc.ccesspcd.CcEssPcd.getNextPerspective(CcEssPcd.java:220)
     at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcd.getNextPerspective(InternalCcEssPcd.java:157)
     at com.sap.xss.essservices.cc.ccesspcd.CcEssPcdInterface.getNextPerspective(CcEssPcdInterface.java:135)
     at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface.getNextPerspective(InternalCcEssPcdInterface.java:132)
     at com.sap.xss.essservices.cc.ccesspcd.wdp.InternalCcEssPcdInterface$External.getNextPerspective(InternalCcEssPcdInterface.java:210)
     at com.sap.pcuigp.xssutils.ccxss.CcXss.getNextPerspective(CcXss.java:238)
     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXss.getNextPerspective(InternalCcXss.java:157)
     at com.sap.pcuigp.xssutils.ccxss.CcXssInterface.getNextPerspective(CcXssInterface.java:121)
     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface.getNextPerspective(InternalCcXssInterface.java:128)
     at com.sap.pcuigp.xssutils.ccxss.wdp.InternalCcXssInterface$External.getNextPerspective(InternalCcXssInterface.java:188)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:479)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseEvent(FPMComponent.java:938)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseEvent(FPMComponent.java:1101)
     at com.sap.xss.hr.skl.detail.VcSklDetail.addChanges(VcSklDetail.java:206)
     at com.sap.xss.hr.skl.detail.wdp.InternalVcSklDetail.addChanges(InternalVcSklDetail.java:236)
     at com.sap.xss.hr.skl.detail.Detail.onActiononAddChanges(Detail.java:220)
     at com.sap.xss.hr.skl.detail.wdp.InternalDetail.wdInvokeEventHandler(InternalDetail.java:235)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1356)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:327)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:869)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
In the log trace of portal nwa.
com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
sap.com/tc~wd~dispwda
I made a trace using the t.code ST01 and the system not show error of authorizations. I checked the t.code SLG1 and the system not show none log.
Please anyone can help me with suggestions for solve this issue,
Regards
Carmen

I assigned the role SAP_ALL but the issue continue.
I checked the skills catalog and qualifications and all is Ok.
I don`t understand the cause of this error.
Thanks in advance,
Regards
Carmen G

API for search profile options-R12.

Is there any API for searching profile options? (R12)
Using ibe_customer as the default responsibility.How to filter profile option search using organization , responsibility and different access level?
Edited by: Ep on Aug 29, 2012 11:57 PM
Edited by: Ep on Aug 29, 2012 11:58 PM

hi ,
You can search the table that profiles options are saved,Using the application id in that table ,you have query it....

Erecruitment Job Search

Hi
In Erec we have a Standard Job search Webdynpro Component HRRCF_C_SEARCH_UI Where we can search for the Jobposting based on Parameters like Functional Area, Corporate Title, Country, Location and Contract type,
When we search based on Country and Location only for few postings it will be unsuccessfull but without giving any search criteria we are able to get all the postings. This is happening only for few Posting remaining can be search on all the parameters,
We are searching for the Postings which are created earlier and the Background Job which runs the program RCF_PERIODICAL_SERVICES has been completed to in frequency of 30 minutes.
When i debug the code i see it searches in the Function Module HRRCF_MDL_SRCH_SEARCH and in that some SKWF_INDEX_COMBINED_SEARCH_XML with some query table ..
Is this some kind of TREX? I have no idea about this.
Please Help me out.
Thanks
Dipu

I hope some can help to Depu from SAP since the TEX is available there.
all the best Deepu and do contact some one from sap to get your search.
Thanks,
Mahesh.Gattu

E-Recruitment Job Search Template_Country field comes from where

Helo Experts,
I am facing a problem in Job search Template. We have only one country, where we operate E-Recruitment, so I have created few branches and assigned these Branches only to one company code in configuration.
But in the Job Search template in Application cockpit shows two countries, where i am understanding from where this unknown country is coming inaddition to the configured.
Can you pls help me out, from which table of configuration step the country is picked up and populated in Job Search template.
Thanks evryone in advance and awaiting for you valuable inputs
Thanks
Gita

Hello Gita,
as you found out cluster INDX is used for caching the branch location information. The information is maintained by the class CL_HRRCF_BRANCH e.g. in method UPDATE_CLUSTER. The class and its methods are part of the e-recruiting application for maintaining branches (in standard found on the e-recruiting administrator startpage / portal role).
These internal functions of the e-recruiting applications are the reason why you should not maintain the branches from IMG or directly in TCode BP. Only using the e-recruiting applications ensures that everything is maintained correctly.
To solve your current issue I'd suggest to maintain the branch again using the link of the e-rec administrator. Set the country to a different value, save it and reset it to the value you want. This should update the cluster.
Best Regrads
Roman

IC winclient search profile

Dear all,
Iam trying to substitute function module CCMCS_BP_SUBCREATE2 with CCMCS_BP_POPULATE2 in the search profile for ICWINCLIENT. but it gives me a dump saying that parameter 'Searchtype' is missing for it. Has anyone come across this problem before?

After you have created the new IC web profiles, you have to assign them to the corresponding hierarchy nodes of the CRM organizational model: Either to an appropriate organizational unit, a position or directly to a user.
If you assign an IC WebClient profile to an organizational unit, it is also valid for all subordinated objects (like positions and users).
Use transaction code PPOMW to assign the IC web profile in the CRM org model.
In the organizational structure select the appropriate position. Double-click on this position in the Task assignment area.
From the menu bar choose Goto/Detail object/Enhanced object description.
On tab Active highlight the infotype IC WebClient Profile.
Choose Create infotype (F5) ans put in your IC wen profile then save.
Cheers,
Manoj

No result with Job Search in E-Recruiting (WD ABAP)

Hi all,
we're using E-Recruiting 6 Enh. Pack 3 and WebDynpro Abap for the services
available to external candidates, but we have the following problem:
the Job Search (free text or criteria) always returns no result even if the T-Rex works
correctly testing it via the transactions on the backend (it gives the result we expect).
Any idea about what we missed?
Thanks in advance, kind regards.
Angelo

Hi,
We are facing a lot of problems in the search application as well. We have defined our own customised search jsut like first name and last name.
It is giving wierd results. Can you please tell us the links or hints where can we look into this to rectify this..
Thanks a lot

E-Rec@ Job Postings are not reaching to Job Search !!!

Dear All,
We are facing an issue in Job Postings:
1.Published Job Posting (from 01.09.2011 to 27.09.2011) is not reaching to Job seasrch (under E-rec self services role >Employement Oppourtunites>Job Search.
2. If we EXTEND the period of Job posting (from 27.09.2011 to 31.10.2011) shld show under internal job search (under E-rec self services -->Job search). But here extended Job posting also not reaching to the Job search.
Can any one share the valuable opinion on this issue.
Thanks,
Asha....

Hello Asha,
Please have a look at wiki page:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SES%28SearchEngine+Service%29
There you will find documents about several search problem topics discussed which may help you get the solution. Usually it is always good to check Report RCF_CHECK_SEARCH_SETTINGS and Report COM_SE_SEARCH_IIF_TEST and additionally the other links matching your issue.
Regards
Nicole

Job Search profile

Similar Messages

Maybe you are looking for