Job Spool ID non-existent for recently ran jobs

There is a job that is ran daily which generates a spool output each time. But for some reason, today's spool does not exist in tables TBTCP-LISTIDENT or TBTC_SPOOLID-SPOOLID. However, I can view the spool output in sm37 just fine. For previous runs before today, the spool information shows up in those tables as expected.
I've also tried running BP_JOB_READ, whose output JOB_READ_STEPLIST-LISTIDENT is initial. Again, for previous days it shows the correct spool id..
I need to access the spool output programmatically after it is created (but in a new program). I would prefer to do this instead of creating an enhancement..
Does anyone know what is going on here?

answer:
i was using schedule date
see tbtco for run date
Edited by: erich meier on Aug 4, 2009 8:00 PM

Similar Messages

Spool need to create for Batch cancelled job

Hi Experts,
How can we display spool for the batch job which has been cancelled.
I ve executed alv output in background job. But, some condition is not satisfied, so it has been terminated( job is cancelled). I need spool for the cancelled job.
any suggestions.
Thanks
GR

HI Kiran,
I have created program with ALV grid output, that they are running in background.
Here is the code,
     IF NOT sy-batch IS INITIAL.
*program termination
        MESSAGE a203(z3) WITH s_vari-low text-025.
      ENDIF.
    ENDIF
Before to this code i am calling ALV GRID...
If i run in background Its creating a spool. But, after termination deleting the spool.
How can i make changes that the spool should not delete in batch job.
Thanks & Regards
GR

How to change the user for an event job as SAP_MONITORING_STARTUP_DISPATCH

Hi experts!
We change the user that execute all our jobs. I can change the user JOB-BW for JOB-BI for this job SAP_CCMS_MONI_BATCH_STARTUP_DP, but the problem is when this job is executed by event for this other job SAP_MONITORING_STARTUP_DISPATCH, but i can't change the user JOB-BW for JOB-BI for this event
Could you tell me, how i do the change user for this job.
Best Regards
Ramon Sanchez

Hi!
My problem have been solved. The job SAP_CCMS_MONI_BATCH_STARTUP_DP is automatically created by
Job SAP_CCMS_MONI_BATCH_DP. It is an event triggered job to handle the startup-methods which are to be processed in batch.
The event is SAP_MONITORING_STARTUP_DISPATCH; I only select the job in SM37 and specify this event and after made the search the job SAP_CCMS_MONI_BATCH_STARTUP_DP i only change the user.
Thank you all for your help!
Ramon Sanchez

SM36 job --- next job should start after the completion of before job

Hi All,
I have a job which is running hourly . My requirement next job should start after the completion of before job .
forexample :
It will run evenry hour like ,--- 8 am,9 am,10 ,11 etc..
My requirement
9am job should start after completion of 8 am job ... Can you please let me know ... How can i achieve this thru SM36.
Thanks,
Tashvi

Hi Tashvi,
Start Criteria :
From the initial define background job screen, click on the u2018Start dateu2019 pushbutton to indicate the start criteria for the background job. The options available for scheduling jobs are:
Immediate - allows you to start a job immediately.
Date/Time - allows you to start a job at a specific date/time.
After Job - allows you to start a job provided that another job has completed.
After Event - allows you to specify the event when you want your job to run.
At Operation Mode - allows you to start a job when the system switches to a particular operation mode.
Scheduling Job after another Job :
The u2018After Jobu2019 pushbutton allows you to start a job provided that another job has been completed. With this option, you must specify the name of the job that must be completed for the current job to run. If the u201CStart status-dependentu201D option is checked, the current job will only run if the specified job ends successfully. This option is useful in cases where the current job depends on the outcome of the specified job.
Hope this Helps.
Regards,
Chandravadan

More Lion issues - Throwing Console errors for non-existent application

Again, with the bad side of Lion.
I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to: /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.... and the others DON'T EVEN EXIST!!
How do I keep this from happening? Why does the OS go after this when it's been removed?????
8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

My iPhone 5S prompts me for my password to an Apple ID email that no longer exists as an account. How do I change my Apple ID address without having to change the primary address to a non-existent email account?

I cannot sign into icloud on my phone because the Apple ID is an email account that has been deactivated and deleted. How can I change my Apple ID without having to change the primary email address to this non-existent account? If I did so, I wouldn't be able to access the account to receive the verification email. Please help!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT5616 I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

If you didn't create an iCloud account on an iOS device or Mac, you don't have one. You can't create an account on a PC. If you were charged for an iCloud storage upgrade without having an account, contact the Apple online store at the bottom of this page for a refund.

What's with the non-existant free trial download for Photoshop?

What's with the non-existant free trial download for Photoshop? You click on "Download free trial" and it takes you to a page that takes you to a forum… nothing happens. I've done this about 6 times on two browsers. Of course, there's no help from Adobe, so I'm trying this forum. Thanks!

Thanks very much for a prompt reply! Much appreciated. Unfortunately, that's exactly the page I was on. And I used both Firefox and Safari and got the same page, with the same nothing...
As this forum doesn't allow attachments, I'll cut and paste the page here (there's not much):
Keep learning
Whether you're new or a pro, we're always making Photoshop better.
Learn more with these tutorials.
Get support
Have any questions? Visit the Learn & Support area for help.
That's all that's on the page. No buttons, URLs, menus… nothing. And just to confirm, the URL is as you gave: https://creative.adobe.com/products/download/photoshop
Something's fishy...

ORA-22285 - non-existent directory or file for FILEOPEN operation

Hello
I want to insert the xmldata from a xmlfile to the a table, with this scirpt:
#!/bin/sh
set -x
for i in `find . -name "dspevent*.xml"| awk -F"/" '{print $NF}'`
do
echo $i
fname_old=$i
fname_neu=`ls $i | awk '{print "OK_"$0}'`
cat $i | sed 's/aps://g' >$fname_neu
echo $fname_neu
rm $i
#insert_xml $fname_neu
INSERT_XML=`sqlplus -s username/passwort@database <<EOF
INSERT INTO event_xml (name,
dtsysl,
hrsysl,
dtcptl,
nusesi,
dsp_step,
dsp_state,
bat_class,
bat_program,
bat_seqi,
bat_state)
SELECT *
FROM XMLTABLE (
'Operations/Event'
PASSING xmltype (BFILENAME ('EVENT_DIR', '$fname_neu'),
NLS_CHARSET_ID ('CHAR_CS'))
COLUMNS name VARCHAR (40) PATH 'name',
dtsysl DATE PATH 'dtsysl',
hrsysl NUMBER PATH 'hrsysl',
dtcptl DATE PATH 'dtcptl',
nusesi NUMBER PATH 'nusesi',
dsp_step VARCHAR (40) PATH 'DSP/step',
dsp_state VARCHAR (40) PATH 'DSP/state',
bat_class VARCHAR (40) PATH 'BAT/class',
bat_program VARCHAR (40) PATH 'BAT/program',
bat_seqi NUMBER PATH 'BAT/seqi',
bat_state VARCHAR (40) PATH 'BAT/state');
EOF
`
done
But the problem is, that I have always this error message:
ORA-22285 -> non-existent directory or file for FILEOPEN operation
I'd create a direcotrie and over utl_file.fopen I can write a file to this directorie, but this works over the path, not over the directory name. the utl_file_dir parameter was also set to the correct path. Whats wrong or how can I debug this problem?
thanks.
roger

- the name of the directory is correct.
- how can I check, that the user can use the directory?
- in this logfile you can see that, the file name will replace correctly:
./dspevent.sh
+ awk -F/ {print $NF}
+ find . -name dspevent*.xml
+ echo dspevent_db_20110503030448_10641.xml
dspevent_db_20110503030448_10641.xml
fname_old=dspevent_db_20110503030448_10641.xml
+ awk {print "OK_"$0}
+ ls dspevent_db_20110503030448_10641.xml
fname_neu=OK_dspevent_db_20110503030448_10641.xml
+ sed s/aps://g
+ cat dspevent_db_20110503030448_10641.xml
+ echo OK_dspevent_db_20110503030448_10641.xml
OK_dspevent_db_20110503030448_10641.xml
+ rm dspevent_db_20110503030448_10641.xml
+ sqlplus -s username/passwort@db
INSERT INTO event_xml (name,
dtsysl,
hrsysl,
dtcptl,
nusesi,
dsp_step,
dsp_state,
bat_class,
bat_program,
bat_seqi,
bat_state)
SELECT *
FROM XMLTABLE (
'Operations/Event'
PASSING xmltype (BFILENAME ('EVENT_DIR', 'OK_dspevent_db_20110503030448_10641.xml'),
NLS_CHARSET_ID ('CHAR_CS'))
COLUMNS name VARCHAR (40) PATH 'name',
dtsysl DATE PATH 'dtsysl',
hrsysl NUMBER PATH 'hrsysl',
dtcptl DATE PATH 'dtcptl',
nusesi NUMBER PATH 'nusesi',
dsp_step VARCHAR (40) PATH 'DSP/step',
dsp_state VARCHAR (40) PATH 'DSP/state',
bat_class VARCHAR (40) PATH 'BAT/class',
bat_program VARCHAR (40) PATH 'BAT/program',
bat_seqi NUMBER PATH 'BAT/seqi',
bat_state VARCHAR (40) PATH 'BAT/state');
INSERT_XML= PASSING xmltype (BFILENAME ('EVENT_DIR', 'OK_dspevent_db_20110503030448_10641.xml'),
ERROR at line 15:
ORA-22285: non-existent directory or file for FILEOPEN operation
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
+ echo dspevent_db_20110502190712_10641.xml
dspevent_db_20110502190712_10641.xml

Application hangs for non existing value

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

Hi,
At the DB level I tried to query non existing value from the table, query came out with "no rows selected" . But when I try to do the same from front end, application hangs! I just checked in the statspack report it shows like query is taking more cpu time to execute. what could be the reason for this?
when I join the v$session,v$sql to get the currently running query on database, it shows the query which try to execute from the application as active.
why it is hanging in application and why not in DB?
can any one brief me on this regard? why does application hangs for non exsting value?
With Regards
Boo

How can we stop generating spools for some batch jobs?

HI guys,
Is memory will be occupied in SAP during spool generation from batch jobs ?
If yes, to reduce occupied memory, we want to stop generating spools for few batch jobs. Please suggest me the way how we can acheive this.(Step details)
Please help me.
Thanks in Advance.
Regards,
Sahil

Stopping the spool generation for background jobs will not help you to reduce the memory load.
First check what is the total memory utilization and type of processes where the memory is being utilized more.
EWA can give you better idea to get the above details.
Spooling concept doesn't eat that much of memory what you are expecting.
Regards,
Nick Loy

Kde3 packages: "non existant prefix '' for kdelibs3"

I have no ide what happend but today I'm getting this error for all packages for kde3:
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde/bin/kde-config
configure: error: /opt/kde/bin/kde-config --prefix outputed the non existant prefix '' for kdelibs.
This means it has been moved since you installed it.
This won't work. Please recompile kdelibs for the new prefix.
make: *** No targets specified and no makefile found. Stop.
although it is working if done with as root user with argument '--asroot' (but I must add to all PKGBUILD string: '--with-qt-dir=/opt/qt')
what happend ? what did I screw up ?
Last edited by zyghom (2008-11-19 23:09:33)

azleifel wrote:I've come across this as well. Like mforce said, it should work if makepkg is run as root (don't forget to add the --asroot switch to the makepkg command).
Yeah, that worked for me, but it's an indication that some work needs to be done. One needs to AVOID running this as root, and so I think thats going to be the first challenge for the amarok1 maintainer. The ONLY thing we should use root for is the actual installation, not the compilation.

CS3 Installer asks for non-existent DVD drive

I'm running CS3 on Windows XP. I need to reinstall because I somehow lost codecs for Premiere Pro. Whenever I try to reinstall, the CS3 installer puts up an Installer Alert that asks me to insert CS3 Master Collection Disc 1 into drive G:\ to continue installation.
That sounds pretty simple, but there is no G: drive on my computer. My two DVD drives are D: and E:, and inserting the disc there has no effect. Checking the Windows device manager shows no G: device recognized anywhere on the computer.
I can only click OK, which returns the same alert, or Cancel to cancel the installation. I cannot, for the life of me, figure out how to get the CS3 installer to ask for installation disks on an existing drive. What's particularly annoying is that the installer is running from a DVD in drive E:, so you'd think it would know to ask for further discs in drive E:. I've tried it as well from drive D:.
Any ideas for getting the installer to stop asking for discs in a non-existent drive?
I've toyed with the idea of completely uninstalling CS3, but am afraid that the installer still won't work, in which case I won't be able to get any work done using CS3 at all.
Thanks for any and all help,
Mike Boom

The 404 means you have not followed the Very Important Instructions on the prodesigntools page before clicking the download links.
The 7 steps are crucial for setting the correct cookies on your hard drive so that the Adobe servers will grant you access to the download files when you click the links.
So:
Go back to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Follow the Very Important Instructions (Step 0 to Step 6 = 7 Steps)
Then click the download links and they will work.

Configuring multiple spool reciepients in CPS for a job?

HI
Can anyone help me
How can i configure multiple spool recipients for a particular job in CPS?
Is this possible?
Kindly please guide me how to configure.

Hi Ram
Thanks for your solution.Its working fine.
We have created a shared distribution list in the end system and we have used that name while defining the spool recipient list in CPS
Thanks
Arun

Try the following: Where is my profine stored? It brings you to non existing buttons etc. This is so for most iof the support.

It 's a general problem: the structure of the "help sysytem" has been changed (perhaps in part I dion't kow) so the the flow of questions ends up to non existing (no more existing..) tips, suggestions, or whole instructions of how to, no more existing or operating.
Very frustrating.
I've foun my profile, in Linux, on the terminal with something like "find -name *.mab " and got it in a split second. None of the suggested ways in the help suite worked!
This is a general question for the site designers, thanks for helping [Indeed: it's the Help menu...]. Greets,
Giancarlo.

unhappy and frustrated wrote:
You make it difficult to buy your products
Errr... no, they really don't.
You don't need a disk (which will be out of date by the time you get it anyway) - just download the current version and insert the serial number when prompted.

Job Spool ID non-existent for recently ran jobs

Similar Messages

Maybe you are looking for