Job status in OEM console is not updated

Hi,
I am using OEM job console to run some batch jobs. When a job is submitted for execution, the job status does not change to started/completed. It always remains in the scheduled status, but when I check the database the job is running and it finishes fine. I checked the agent on the target database and restarted the management server. Any thoughts on what could be the issue?
Thanks
Rk

Whats exactly you are looking ? is there any reason for comparing ?

Similar Messages

In transaction code BBP_PD the status of the workitem is not updating showi

Hi Gurus,
We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
Please reply with your suggestions.
Thanks in advance.
Madhukar

Hi
Thanks for your reply.
We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
can you suggest something on this issue.
Workflow Item:
Workitem-ID        000002009126
Task                      WS90000040
Text                       Shopping Cart Approval N-Step 185522 (BADI)
Status                    STARTED
Statustext              In Process
Date                      09/24/2008
Time                     08:18:09
Node ID            Agent                    User                         State        Workitem       Created at
0040000000      Kotesh APP       APP_KOTESH          No workitem found
0040000002                                                                    No workitem found
0040000001      shiva APP         APP_SHIVA               No workitem found
0040000004                                                                    No workitem found
0040000003     shiva APP         APP_SHIVA               No workitem found
0040000006                                                                   No workitem found
0040000005      SM1                 NNA_FA_SM_1         No workitem found
0040000008                                                                   No workitem found
Regards
Madhu

Why dispute case "status" changing automatically and also not updating in log

HI,
I found something curious as you can see in the image below , I was process dispute case "data complete" to "Partially Approved - SDC" but system automatically changing status to data complete ... I did 2 times but system is automatically changing status . We are unable to get the details in log also.
Any one can help why system is automatically changing and log is not updating .

Hi,
It may be the case that some of the SharePoint timer jobs were not created when the PWA was provisioned.
Try to re-provision the PWA instance and see if that would help (edit the PWA instance in SharePoint Central Admin without changing anything)
Paul

User status in Q-info record not updating on UD

Hi All,
My required scenario was, delivery of a material from a vendor must pass through inspection series
u2022     Model
u2022     Preliminary
u2022     Regular delivery
For that,
1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 -    V_TQ32A'
3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot.
Kindly let me know where I am wrong.
Regards,

closed

Status of number range has not updated

HI GURUS!
I read a lot of similar questions as mine. But I didn't find the correct answer for my problem.
The issue is: after I uploaded the Vendor master with LSMW, the status of the number range is still 0!
So I have to change it manually. What should be the problem? Is it possible that problem is in the NUMBER_GET_NEXT fm?
Thanks in advance,
Gábor

Hi!
The number range for vendors is internal! If I change the status after migration, in the XK01 transaction the system gives the correct next number. But how can it possible that the status has not updated after uploading?
Best regards,
Gábor

OEM Console does not show IFS Node or Folder....

Does anyone know why ?
Regards
Rajiv

To manage 9iFS from a remote OEM 9.0.1 console, i.e. get the iFS Node or Folder to appear, you need to install the following on your Windows NT client in this order:
1) Oracle 9i Client (Admin option)
2) Oracle HTTP Server using 9i Enterprise Edition CD 1 (which prompts for CD 2). Deselect all other products from bottom up to avoid dependency problems.
3) Oracle 9iFS (choose 9iFS Administration Configuration when the Configuration Assistant runs and click on Configure)
Reboot your PC which will restart HTTP Server and Intelligent Agent and you should now see Internet File Systems in the OEM Console Navigator, rediscover the iFS node if you cant. Ignore the instruction to run ifsomssetup because it will complain that it cannot find oemctl.bat. ifsomssetup is only designed to make OMS aware of 9iFS but you will have run this script previously when you installed 9iFS on the server, so there should be no need to run it again.
Note that if you dont install HTTP Server on Windows NT client then 9iFS Config Assistant will fail to run, giving error: "No output available for this tool". HTTP Server does not need to be installed on Windows 2000 as the iFS Config Assistant will run successfully

Last Status Update in Distribution Point Configuration Status after 2012 R2 Upgrade not updating

I am having the oddest problem, and I was wondering if anyone had some pointers or knows how I can get this working. After I upgraded from
2012 SP1 CU3 to 2012 R2, the status update date on the DP config status will not update at all, even though under each DP it is updating? I can still push content to them, but instead of getting a % of transfer that is complete I get the generic 'Detail will
be available after the server finishes processing the messages'. I have tried to remove and re add the DP role to the DP's and am met with the same problem. I am assuming it's something is SQL but where to begin to look I have no idea.

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
BTW I find that most of these type of things take ~ 24 hours to update.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Console.app not updates in LOG DATABASE

After a forced shutdown of the MacBook Pro, the console.app displays all logfiles and also LOG DATABASE QUERIES, but the content of the LOG DATABASE only date back to the fored shutdown point in time. Afterwards, system.log, etc are updated, but the LOG DATABASE is not.
I have checked for the /var/log/asl.db, which I do not have (touching it also did not help). I have an /var/log/asl directory containing following files (the LongTTL.asl was updated after forced shutdown, 14:19 was restart time):
drwxr-xr-x 11 root wheel 374 4 Jan 15:55 .
drwxr-xr-x 53 root wheel 1802 4 Jan 15:41 ..
-rw------- 1 marcus wheel 81500 2 Jan 23:42 2009.01.02.U501.asl
-rw-r--r-- 1 root wheel 51312 2 Jan 23:40 2009.01.02.asl
-rw------- 1 marcus wheel 102955 3 Jan 22:10 2009.01.03.U501.asl
-rw-r--r-- 1 root wheel 61440 4 Jan 00:09 2009.01.03.asl
-rw------- 1 marcus wheel 41827 4 Jan 14:19 2009.01.04.U501.asl
-rw-r--r-- 1 root wheel 38431 4 Jan 14:18 2009.01.04.asl
-rw-r--r-- 1 root wheel 3547 4 Jan 15:55 LongTTL.U0.asl
-rw-r--r-- 1 root wheel 113923 4 Jan 15:55 LongTTL.asl
-rw-r--r-- 1 root wheel 8 4 Jan 14:19 StoreData
Any more ideas how to repair/enable LOG DATABASE in console.app?
thx.

Somehow the forced shutdown corrupted that date files in var/log/asl subdirectory. Restarting machine the following day showed new messages within LOG DATABASE, but messages from the day before are not displayed any more. So the LOG DATABASE seems to work again.

Console Application not updating the database

Dear all,
I am new to c# development. I have a console application front end in program.cs
I have a local database on visual studio.
When I execute the stored procedure locally on the database the data is getting updated in the database.
When I update the same through Console Application - the data is not appearing in the database.
Can somebody throw light on this? Where I am missing
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace AssetApp
class Program
static void Main(string[] args)
bool value = true;
while (value)
value = getdisplay();
//Console.ReadLine();
//value = false;
private static bool getdisplay()
Console.WriteLine("-------------------------------------- ");
Console.WriteLine("---------------------------------------");
Console.Clear();
Console.WriteLine("----------Asset Application------------");
Console.WriteLine(" 1 Company Asset ");
Console.WriteLine(" 2 Standby Laptop Register ");
Console.WriteLine(" 3 Scrap Register ");
Console.WriteLine(" 4 Purchase Register ");
Console.WriteLine(" 5 Service Call Report ");
Console.WriteLine(" 6 IT Helpdesk ");
Console.WriteLine(" 7 Exit ");
Console.WriteLine("---------------------------------------");
string input = Console.ReadLine();
switch (input)
case "1":
CompanyAsset();
break;
case "2":
Console.WriteLine("Standy Laptop Register");
break;
case "3":
Console.WriteLine("Scrap Register");
break;
case "4":
Console.WriteLine("Purchase Register");
break;
case "5":
Console.WriteLine("Service call Report");
break;
case "6":
Console.WriteLine("IT Helpdesk");
break;
case "7":
return false;
default:
break;
return true;
private static void CompanyAsset()
Console.WriteLine("------Company Asset------------------------");
Console.WriteLine("Type the Department Name");
string departmentName = Console.ReadLine();
Console.WriteLine("Type the First Name");
string firstName = Console.ReadLine();
Console.WriteLine("Type the Last Name");
string lastName = Console.ReadLine();
Console.WriteLine("Type the User Name");
string userName = Console.ReadLine();
Console.WriteLine("Type the Model Number");
string modelNumber = Console.ReadLine();
Console.WriteLine("Type the AssetTypeID");
string assetTypeID = Console.ReadLine();
Console.WriteLine("Type the SerialNumber");
string serialNumber = Console.ReadLine();
Console.WriteLine("Type the WarrantyStartDate");
DateTime warrantyStartDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Type the WarrantyEndDate");
DateTime warrantyEndDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Company");
string company = Console.ReadLine();
Console.WriteLine("EngineerID");
string engineerID = Console.ReadLine();
Console.WriteLine("ITHelpdeskID");
string itHelpdeskID = Console.ReadLine();
Console.WriteLine("EmpID");
string empID = Console.ReadLine();
//Handshake
SqlConnection myNewConnection = new SqlConnection("Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\AssetApp.mdf;Integrated Security=True");
//open the database
myNewConnection.Open();
//create command
SqlCommand myCommand = myNewConnection.CreateCommand();
//using the stored procedue to update the database using parameters add
myCommand.CommandText = "InsertAsset";
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.Add(new SqlParameter("@DepartmentName", departmentName));
myCommand.Parameters.Add(new SqlParameter("@FirstName", firstName));
myCommand.Parameters.Add(new SqlParameter("@LastName", lastName));
myCommand.Parameters.Add(new SqlParameter("@UserName", userName));
myCommand.Parameters.Add(new SqlParameter("@ModelNumber", modelNumber));
myCommand.Parameters.Add(new SqlParameter("@AssetTypeID", int.Parse(assetTypeID)));
myCommand.Parameters.Add(new SqlParameter("@SerialNumber", serialNumber));
myCommand.Parameters.Add(new SqlParameter("@WarrantyStartDate", warrantyStartDate));
myCommand.Parameters.Add(new SqlParameter("@WarrantyEndDate", warrantyEndDate));
myCommand.Parameters.Add(new SqlParameter("@Company", company));
myCommand.Parameters.Add(new SqlParameter("@EngineerID", int.Parse(engineerID)));
myCommand.Parameters.Add(new SqlParameter("@ITHelpdeskID", int.Parse(itHelpdeskID)));
myCommand.Parameters.Add(new SqlParameter("@EmpID", int.Parse(empID)));
int recordsAffected = myCommand.ExecuteNonQuery();
if (recordsAffected == 1)
Console.WriteLine("Successful your entry");
else
Console.WriteLine("Your entry is not successful");
myNewConnection.Close();
Console.WriteLine("");
Console.WriteLine("Press Enter to continue");
Console.ReadLine();
public static void StandbyLaptopRegister()
Console.WriteLine("-------------------------------");
Console.WriteLine("Select the Date & Time");
string DateTime = Console.ReadLine();
Console.WriteLine("");
ALTER PROCEDURE dbo.InsertAsset
@DepartmentName NVARCHAR(50),
@FirstName NVARCHAR(50),
@LastName NVARCHAR(50),
@UserName NVARCHAR(50),
@ModelNumber NVARCHAR(50),
@AssetTypeID INT,
@SerialNumber NVARCHAR(50),
@WarrantyStartDate SMALLDATETIME,
@WarrantyEndDate SMALLDATETIME,
@Company NVARCHAR(50),
@EngineerID INT,
@ITHelpdeskID INT,
@EmpID INT
@parameter1 int = 5,
@parameter2 datatype OUTPUT
AS
/* SET NOCOUNT ON */
BEGIN
INSERT CompanyAsset(DepartmentName,
FirstName,
LastName,
UserName,
ModelNumber,
AssetTypeID,
SerialNumber,
WarrantyStartDate,
WarrantyEndDate,
Company,
EngineerID,
ITHelpdeskID,
EmpID)
VALUES(@DepartmentName,
@FirstName,
@LastName,
@UserName,
@ModelNumber,
@AssetTypeID,
@SerialNumber,
@WarrantyStartDate,
@WarrantyEndDate,
@Company,
@EngineerID,
@ITHelpdeskID,
@EmpID)
/*RETURN @@IDENTITY*/
END
Cheers
Sathya

Hello,
Usually when I see
AttachDbFilename=|DataDirectory| ...
The database was added into the project via the IDE add new data source and if so make sure under the property window for the database that "Copy to Output Directory" is set to either the first or last option as the default "Copy always"
copies the database each time you build the project thus overwrites the last time you ran the project.
I would recommend the "Copy if Newer" which means the database is only copied if you make changes to the database. Set "Copy if newer", build run check results.
Of course this may not be the issue but may very well be too.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Job status failed in console

helo
pls i have my job that i submit in console failing. my oms repository is on my system and i am trying to run sql command like this select * from dba_users and when i submit the job the status in the history pane reads failed. meanwhile the destination is my orcl database that is my local database.
pls i need a help on this
thank you

Can you click on the job then click on show output
to see why it failed? Due to a bug, you have to click on
another like item first before clicking on the failed
line item.

Console Messages - Not Updating/Working

Hi, went to look for something in my Console Messages today and it does not seem to have any new information since April 11th 2009. It has info from the 5th-11th and that is it.
How can I get it to show recent data? Is it not working or has become corrupt somehow?
Any ideas?

Here is what shows up when I filter system.log with crash:
Notes:
- I don't have CS3 installed on my machine anymore, so not sure why that is showing up.
Jul 23 09:22:17 tony-dehnkes-macbook [0x0-0x102102].org.mozilla.firefox[3730]: [07-23 15:22:17] Torbutton NOTE: Conflict between noncrashed and normal_exit states.. Assuming crash but no session restore..
Jul 23 09:22:17 tony-dehnkes-macbook [0x0-0x102102].org.mozilla.firefox[3730]: [07-23 15:22:17] Torbutton NOTE: Crash detected, attempting recovery
Jul 23 10:49:37 tony-dehnkes-macbook ReportCrash[248]: Formulating crash report for process VersionCueCS3Status[237]
Jul 23 10:49:40 tony-dehnkes-macbook ReportCrash[248]: Saved crashreport to /Users/tdehnke/Library/Logs/CrashReporter/VersionCueCS3Status2009-07-23-104906tony-dehnkes-macbook.crash using uid: 501 gid: 20, euid: 501 egid: 20
Jul 23 12:04:29 tony-dehnkes-macbook ReportCrash[280]: Formulating crash report for process VersionCueCS3Status[265]
Jul 23 12:04:34 tony-dehnkes-macbook ReportCrash[280]: Saved crashreport to /Users/tdehnke/Library/Logs/CrashReporter/VersionCueCS3Status2009-07-23-120403tony-dehnkes-macbook.crash using uid: 501 gid: 20, euid: 501 egid: 20

Final Settlement for Extended Rebate - agreement status not updated

Hi,
When doing final settlement via the Extended rebate, a CM is generated, but the status of the agreement is not updated to D. Any configurations needed or steps to be done? I thought it should be automatically updated by the system..
Thanks,

Hello
Refer following links with SAP Note for reference/understanding:
- The sales volume for Rebate agreement is not current
- Sales volume not current in Rebates
- 456458 - FAQ: How does SDBONT06 work
Thanks & Regards
JP

OOTB Approval Workflow on Custom List does not Update Approval Status

I have a custom list on which I've required content approval. I then created a workflow instance from the "Approval - SharePoint 2010" template. For this workflow I have selected "Update the approval status after the workflow
is completed (use this workflow to control content approval". When I approve the list item via the workflow task item the status of the item is not updated but stays at pending even though the
workflow shows "Completed" with the Outcome of "approved". Is this the expected behavior, i.e. does "Update the approval status after the workflow is completed (use this workflow to control content approval"
not work for custom lists? Does it work on any of the lists?

Hi Kalos1840,
If you check "Require Content Approval" setting, only the way above can update the approval status due to the approval status is for this approval workflow. As this approval workflow cannot achieve your demand, I recommend you un-check "Require Content Approval"
setting and create a custom workflow such as the OOTB Approval Workflow or SharePoint Designer workflow.
Here is the steps of a SharePoint Designer workflow:
1.Go to your custom list , click Create a Workflow in SharePoint Designer.
2.Add a “Start a task process” action in your workflow.
3.Click “these users” and Start a Task Process edit page will pop up.
4.In the Participants field, input your approvers based on the order of approval.
5.In the right of Participants field, select “Serial (one at a time)”.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Enterprise Manager Console does not start

Hi,
I'm running a Windows 2000 PC with Oracle 9i Server on it.
When I want to start the Enterprise Management Console
(Start => Program...) there is only a short reaction on
the Taskbar end when absolute nothing.
I know this problem was already mentioned once here (OEM Console does not start but
the answer there wasn't the right one for my problem.
I could not change the oracle home directory with the ORACLE-HOME-Selector, because I have only one home directory (D:\Programme\oracle\ora92)
My Path variable:
D:\Programme\oracle\ora92\bin;C:\Programme\Oracle\jre\1.3.1\bin;C:\Programme\Oracle\jre\1.1.8\bin;C:\WINNT\MS\SMS\CORE\BIN;D:\Programme\Clementine7.2\BIN;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;D:\PROGRA~1\IBM\SQLLIB\BIN;D:\PROGRA~1\IBM\SQLLIB\FUNCTION;D:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;D:\Programme\IBM\DB2Extenders\bin;C:\Programme\Java\j2re1.4.2_02\bin
And here is my oemapp.bat(It is located in D:\Programme\oracle\ora92\bin. I have already startet it manually with "oemapp.bat console" but there was only the reply ""The input line is too long.
The syntax of the command is incorrect."
@echo off
REM #
REM # Copyright (c) 1998,1999,2000,2001, 2002 Oracle Corporation. All rights reserved.
REM #
REM # PRODUCT
REM #     Oracle Enterprise Manager, Version 9.2.0.0.0 Production
REM #
REM # FILENAME
REM #     oemapp.bat
REM #
REM # DESCRIPTION
REM #     This script is used to launch Applications of Oracle
REM #     Enterprise Manager, Version 9
REM #
REM #
if "%1%" == "recursive" goto startScript
if Windows_NT == %OS% goto :ntSetup
command.com /p /e:8196 /c oemapp recursive %1 %2 %3 %4 %5 %6 %7 %8 %9
goto :end
:ntSetup
setlocal
:startScript
IF "%1%" == "trace" GOTO trace
IF "%1%" == "TRACE" GOTO trace
IF "%1%" == "debug" GOTO trace
IF "%1%" == "DEBUG" GOTO trace
GOTO start2
:trace
SHIFT
SET ORACLE_OEM_CLIENTTRACE=TRUE
SET TRACE= -DTRACING.LEVEL=2 -DTRACING.ENABLED=true
:start2
REM Make sure that our JRE is used for this invocation.
if Windows_NT == %OS% SET PATH=C:\Programme\Oracle\jre\1.1.8\bin;%PATH%
if not Windows_NT == %OS% SET PATH="C:\Programme\Oracle\jre\1.1.8\bin;%PATH%"
SET CLASSROOT=D:\Programme\oracle\ora92/classes
SET JLIBROOT=D:\Programme\oracle\ora92/jlib
SET NETJLIBROOT=D:\Programme\oracle\ora92/network/jlib
SET OEMCLASSES=%JLIBROOT%/oembase-9_2_0.jar;%JLIBROOT%/oemtools-9_2_0.jar
SET BALICLASSES=%JLIBROOT%/swingall-1_1_1.jar;%JLIBROOT%/ewtcompat-3_3_15.jar;%JLIBROOT%/ewt3.jar;%JLIBROOT%/ewt3-nls.jar;%JLIBROOT%/share.jar;D:\Programme\oracle\ora92\sysman\jlib\master.jar;D:\Programme\oracle\ora92\sysman\jlib\master_de.jar
SET AURORACLASSES=D:\Programme\oracle\ora92/lib/aurora_client.jar
SET HELPCLASSES=%JLIBROOT%/help3.jar;%JLIBROOT%/help3-nls.jar;%JLIBROOT%/oracle_ice5.jar
SET DBUICLASSES=%JLIBROOT%/dbui2.jar;%JLIBROOT%/dbui2-nls.jar
SET KODIAKCLASSES=%JLIBROOT%/kodiak.jar
SET JDBCCLASSES=D:\Programme\oracle\ora92/jdbc/lib/classes111.zip;D:\Programme\oracle\ora92/jdbc/lib/nls_charset11.zip
SET NETCHARTSCLASS=D:\Programme\oracle\ora92/sysman/jlib/netchart360.jar
SET ORBCLASSES=D:\Programme\oracle\ora92/lib/vbjorb.jar;D:\Programme\oracle\ora92/lib/vbjapp.jar
SET SECURITYCLASSES=%JLIBROOT%/javax-ssl-1_1.jar;%JLIBROOT%/jssl-1_1.jar
SET OSDNETCLASSES=%JLIBROOT%/netcfg.jar;%JLIBROOT%/o3logon.jar;%JLIBROOT%/verifier.jar
SET OSDPKICLASSES=%JLIBROOT%/ewm-1_1.jar;%JLIBROOT%/ojpse_2_1_5.jar
SET NETMGRCLASSES=%NETJLIBROOT%/netmgrm.jar;%NETJLIBROOT%/netmgr.jar;D:\Programme\oracle\ora92/network/tools
SET XMLCLASSES=D:\Programme\oracle\ora92/lib/xmlparserv2.jar
SET OLAPCLASSES=%JLIBROOT%/cvd.zip;%JLIBROOT%/jndi.jar;%JLIBROOT%/jewt4.jar;%JLIBROOT%/jewt4-nls.jar
SET MISCCLASSES=D:\Programme\oracle\ora92/assistants/jlib/assistantsCommon.jar;D:\Programme\oracle\ora92/jlib/jle2.jar;D:\Programme\oracle\ora92/jle2-nls.jar
SET QSMACLASSES=D:\Programme\oracle\ora92/rdbms/jlib/qsma.jar
SET CLASSPATHADD=%CLASSROOT%;%OEMCLASSES%;%ORBCLASSES%;%BALICLASSES%;%HELPCLASSES%;%DBUICLASSES%;%JDBCCLASSES%;%KODIAKCLASSES%;%NETCHARTSCLASS%;%SECURITYCLASSES%;%OSDNETCLASSES%;%OSDPKICLASSES%;%NETMGRCLASSES%;%XMLCLASSES%;%AURORACLASSES%;%OLAPCLASSES%;%MISCCLASSES%;%QSMACLASSES%
REM hook for classpath additions
if not "%ORACLE_OEM_CLASSPATH%" == "" SET CLASSPATHADD=%ORACLE_OEM_CLASSPATH%;%CLASSPATHADD%
REM # Oracle change manager requires the following for ocmtclsh.exe
set GBP=
if not exist %CLASSROOT%\oracle\sysman\vtt\vttz\VttzCmDragDropObject.class set GBP=true
if "%ORACLE_OEM_JAVAMX%" == "" set ORACLE_OEM_JAVAMX=-mx128m
REM if "%ORACLE_OEM_JAVAMS%" == "" set ORACLE_OEM_JAVAMS=-ms16m
SET JRE=jrew -nojit %ORACLE_OEM_JAVAMX%
SET NT_START=START
if "%ORACLE_OEM_CLIENTTRACE%x" == "x" goto setup_cp
SET JRE=jre -nojit %ORACLE_OEM_JAVAMX% %TRACE%
SET NT_START=
:setup_cp
SET CLASSPATH_QUAL=cp
if "%ORACLE_OEM_JAVARUNTIME%x" == "x" goto jreSetup
SET JRE=%ORACLE_OEM_JAVARUNTIME%\bin\java %ORACLE_OEM_JAVAMX% %TRACE%
SET CLASSPATH_QUAL=classpath
SET CLASSPATHADD=%CLASSPATHADD%;%ORACLE_OEM_JAVARUNTIME%\lib\classes.zip
:jreSetup
SET ME=oemapp
SET USAGE="Usage: %ME% <application_name>"
if Windows_NT == %OS% goto ntCheckAppName
if not "%2%" == "" goto start95
@echo %USAGE%
goto end
:start95
if "%GBP%" == "true" goto gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DGENERAL_BUS_PACK="" -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:ntCheckAppName
if not "%1%" == "" goto startNT
@echo %USAGE%
goto end
:startNT
set ADMIN_WRL=D:\Programme\oracle\ora92\sysman\admin
set GBP_PROP=
if "%GBP%" == "true" set GBP_PROP=-DGENERAL_BUS_PACK=""
%NT_START% %JRE% -DADMIN_WRL=%ADMIN_WRL% -DORACLE_HOME=D:\Programme\oracle\ora92 %GBP_PROP% -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %1 %2 %3 %4 %5 %6 %7 %8 %9
endLocal
:end
Thnaks for any help.
Nice day

Marcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim

Your username and/or password are invalid in OEM Console

Hi Gurus,
I have a User 'CIS57' and used that to connect as sysdba using the OEM console all the time and was working fine.
Now I am only able to connect to the DB using the SYS as sysdba in the OEM Console and not able to use the CIS57 as sydba anymore.
Any reason why I am not able to connect using this userid in the OEM console. I used this user CIS57 to connect as sysdba all the time.
Not sure why not able to connect using the same credentials now. Please advice
Thanks
Sheik

if that is the case How was I able to connect before
like
cis57
userpassword
sysbda
in the oem console login.
Note: the Oracle version is 11.1.0.6.0
All this connection issue ( using the cis57) user started when one of teh script was asked to run by teh Oracle supports services for a flashback recovery area issue and that crashed the instance and the instance had to be brought up by creating a SER 1 SR with Oracle support.
So they were playing around with teh oradim, pwd files and other parametr file setting while troubleshooting the issue.
Thanks
Sheik

Job status in OEM console is not updated

Similar Messages

Maybe you are looking for