Job SWWDHEX by WF-BATCH getting cancelled
Hi Everyone,
All instances of the Job SWWDHEX are being shown as cancelled in the background job log (SM37). On checking the job log, I found that the report RSWWDHEX is causing dump in the system. The job log shows:
Job started
Step 001 started (program RSWWDHEX, variant &0000000000001, user ID WF-BATCH)
ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED
Job cancelled
On checking ST22 for the runtime error-
Error analysis
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "IF_SWF_WFM_COMPONENT~RAISE_EXCEPTION" "(METHOD)", nor was it propagated by a RAISING clause.
The dump started happening yesterday onwards. We can't figure out what happened that started this. I tried to find some relevant notes & solutions, but was unable to find anything useful.
Any suggestions or ideas would be very appreciated. Thanks.
Hi.
Please check the note # 987978
1321773 - RSWWDHEX: Runtime error GETWA_NOT_ASSIGNED
Regards
Gangadhar
Edited by: gangadhar hm on Sep 9, 2009 2:49 PM
Similar Messages
-
Job SWWDHEX getting cancelled - Report RSWWDHEX giving dump
Hi Everyone,
All instances of the Job SWWDHEX are being shown as cancelled in the background job log (SM37). On checking the job log, I found that the report RSWWDHEX is causing dump in the system. The job log shows:
Job started
Step 001 started (program RSWWDHEX, variant &0000000000001, user ID WF-BATCH)
ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED
Job cancelled
On checking ST22 for the runtime error-
Error analysis
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "IF_SWF_WFM_COMPONENT~RAISE_EXCEPTION" "(METHOD)", nor was it propagated by a RAISING clause.
The dump started happening yesterday onwards. We can't figure out what happened that started this. I tried to find some relevant notes & solutions, but was unable to find anything useful.
Any suggestions or ideas would be very appreciated. Thanks.Hello,
Check if WF-BATCH is okay, ie password not changed and password not expired and it still has its roles.
regards
Rick Bakker
Hanabi Technology -
Job SWWDHEX getting cancelled - OBJECTS_OBJREF_NOT_ASSIGNED
Hi Guys,
Here is the scenario:
We modified WF 90000081 in dev box. In production, the workflow has been triggered and is awaiting response from agent.
WF 90000081 has been moved to production, the workitems created by the WF in production is still awaiting response from the agent.
Now, the job SWWDHEX runs after the WF is in production. The job is cancelled due to OBJECTS_OBJREF_NOT_ASSIGNED.
In ST22, here is the details:
Error analysis
An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "IF_SWF_WFM_COMPONENT~RAISE_EXCEPTION" "(METHOD)", nor was it propagated by a RAISING clause.
Question: How are we going to get away with it? Is there any SAP note which can help with this? I have looked note 1422978, it seems good and could solve the issue, but when I check on the method where the fix will be implemented, I checked in the Events called in ST22, the method is not being called by the job.
Please advise.
Thank you!Hello,
Check if WF-BATCH is okay, ie password not changed and password not expired and it still has its roles.
regards
Rick Bakker
Hanabi Technology -
Reg:SAP_REORG_UPDATERECORDS job getting cancelled
Hi Experts,
I have a standard background job,SAP_REORG_UPDATERECORDS getting cancelled regularly in one of our production boxes.
It runs only for a few seconds and then gets cancelled.
The job log is.....
"Job started
Step 001 started (program RSM13002, variant SAP&001, user ID <XXXXXX>)
Reorganization of update date not allowed in batch
Job cancelled"
I have searched for notes,but could not able to get the right solution
kindly,help me resolve the issue
Thnaks in advance
Rgds-
VenuHello Venu,
This job is no more needed as per recommenation from SAP
Please go through the following notes:16083 and 67014 it shows that job is no more needed.This is the note of SAP about this job:
"The standard job SAP_REORG_UPDATERECORDS that was contained in some delivered versions must no longer be executed (see Note 67014). In its new version, the underlying ABAP Program RSM13002 is programmed so that it terminates when running in a job (that is, in the background). Therefore, the job SAP_REORG_UPDATERECORDS always terminates in this case. In any case, the job SAP_REORG_UPDATERECORDS should be deleted from the pool of standard jobs, if it is still there: sm36 -> 'Standard jobs' -> 'Delete standard jobs'. In addition, released jobs that may exist and contain report RSM13002 should be deleted. You can find and delete these jobs using sm37."
Rohit -
How to send a mail to the user when a job gets canceled?
Hi experts,
I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwinHi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
TBTCO.
DATA: MAILDATA LIKE SODOCCHGI1.
DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR: MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
PERFORM BUILD_TEXT_MESSAGE.
PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
WHERE JOBNAME IN S_JOB
AND STATUS = 'A'
AND JOBCLASS IN S_JOBC
AND SDLSTRTDT = SY-DATUM.
ENDFORM.
Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
I_TBTCO-SDLSTRTTM+2(2) ':'
I_TBTCO-SDLSTRTTM+4(2)
INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
CLEAR MAILREC.
MAILREC-RECEIVER = S_REC-LOW.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
ENDLOOP.
ENDFORM.
Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = MAILDATA
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = 'X'
TABLES
OBJECT_HEADER = MAILTXT
OBJECT_CONTENT = MAILTXT
RECEIVERS = MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Form FORMAT_DATE
FORM FORMAT_DATE USING IN
OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
DATE_INTERNAL = IN
IMPORTING
DATE_EXTERNAL = OUT
EXCEPTIONS
DATE_INTERNAL_IS_INVALID = 1
OTHERS = 2.
ENDFORM.
Regards,
Sree -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
SAP Standard Jobs are getting canceled
Hi Basis Gurus,
In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
The jobs are as follows
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_CPH_HRCOLL
SAP_CCMS_MONI_BATCH_DP
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_NONE_R3_STAT
SAP_COLLECTOR_FOR_PERFMONITOR
SAPCONNECT ALL SEND
SAP_REORG_ABAPDUMPS
SAP_REORG_SPOOL
SAP_RSICFDLT
In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
Please let me know how can troubleshoot it and resolve this issue.
Our is qulaity BW 3.5 system
Solaris OS
Oracle Database
Please help me.
Regards,
Anil.Hi ,
For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
Ankit -
LANDSCAPE FETCH job gets cancelled
Hello Guru's,
The LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
we have already applied the SAP note 1335225 but, the issue still persists.
Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
settings in SMSY and the SLD is not accessible".
can any one help me with how to check the adaptive computing settings in the header data of the system.
Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
details below.
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_MP0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ashb01wa06pr.global.aes.com
port number: 59000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access d
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Immediate reponse is highly appreciated
Best Regards,
S.ViswanathanHello,
Could you include the Landscape_fetch error you mentioned in your message?
I think the issue is still your SLD. At the bottom of SLDCHECK it tries to retreive business systems in SLD.
If it is successfull you will see something like:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
yoursystem1
yoursystem2
yoursystem3
(more...)
Your SLD check shows that it cannot retrieve systems from the SLD:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide. If you still have problems, follow this toubleshooting process...
http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
Best Regards.
Edited by: Phil May on Sep 2, 2009 10:31 AM -
RDDGENOL job getting cancelled with huge number of ABAP dumps
Hi,
In our Production system, we had applied Kernel upto patch level 263 and while
applying SPAM 30 for release 640 it failed. We tried applying Basis patch 15 still
it did not went through.
Since then we are getting around 1500-2500 dumps daily. The job RDDGENOLis getting cancelled and the dumps RAISE_EXCEPTION and SYNTAX_ERROR is displayed in ST22. Today, there were around 2500 dumps in the system.
When I now run the Database <-> ABAP Dictionary consistency check in
DB02, I see number of errors for missing objects in the database. There
are around of dozens of Primary Indexes, secondary Indexes, Tables,
Views listed in the result:
Objects Missing in database No.
=========================== ===
Primary indexes 6
Secondary indexes 14
Tables 37
Views 26
When I try to create each of them using SE16 or using SQL utility on OS
level, it gives an SQL system error. We are also getting thousands of
dumps each day (attached alongwith this message). Also I see the CPF327E error
in the OS Level Joblog.
Also we cannot transport any requests. There is some problem with or
due to the conversions. Is it a problem with Kernel, ABAP dictionary or
database.
Following is the extract of the dumps due to DDIC in 000:
============================================================
Runtime Error SYNTAX_ERROR
Date and Time
ShrtText
Syntax error in program "CL_WB_CROSSREFERENCE==========CP ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSEWB" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "CL_WB_CROSSREFERENCE==========CP ", the following syntax error
occurred
in the Include "CL_WB_CROSSREFERENCE==========CM00D " in line 8:
| "The type "KEYWORD_TAB" is unknown."
============================================================
============================================================
Runtime Error RAISE_EXCEPTION
Date and Time
ShrtText
Exception condition "DESTINATION_NOT_OPEN" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLCRFC" raised the exception
condition "DESTINATION_NOT_OPEN".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Specified destination is not open.
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLCRFC" or "LCRFCU20"
"RFC_CONNECTION_CLOSE"
or
"SAPLCRFC" "DESTINATION_NOT_OPEN"
or
"RADBAT01 " "DESTINATION_NOT_OPEN"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "TXTPDSAP"
Network address.......... "172.16.0.140"
Operating system......... "OS400"
Release.................. "5.3"
Hardware type............ "0065000655EC"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 35
Short dump setting....... "full"
Database server.......... "TXTPDSAP"
Database type............ "DB400"
Database name............ "TXT"
Database owner........... "R3TXTDATA"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Dec 11 2008 23:06:45"
Created in............... "AIX 1 5 00538A4A4C00 (IBM iSeries with OS400)"
Database version......... "DB4_52"
Patch level.............. "263"
Patch text............... " "
Supported environment....
Database................. "V5R2, V5R3, V5R4, V6R1"
SAP database version..... "640"
Operating system......... "OS400 2 5, OS400 3 5, OS400 4 5, OS400 1 6"
Memory usage.............
Roll..................... 696832
EM....................... 16759712
Heap..................... 0
Page..................... 32768
MM Used.................. 1383120
MM Free.................. 3483600
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Program............. "SAPLCRFC"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLCRFC" in
"RFC_CONNECTION_CLOSE".
The main program was "RADBAT01 ".
The termination occurred in line 22 of the source code of the (Include)
program "LCRFCU20"
of the source code of program "LCRFCU20" (when calling the editor 220).
The program "SAPLCRFC" was started as a background job.
Job name........ "RDDGEN0L"
Job initiator... "DDIC"
| Job number...... 00032101
============================================================
Kindly let me know the immediate fix. Thanks!
Regards,
NickHi Nick,
I would say, you are having a slight missperception of this forum ... it should not replace your basis ressources in your company.
What you are doing is pretty complex (and the mixtrure of SPAM Update AND Basis SP seems to be wrong to me) and therefore, it will not be possible, to help you, just based on such a short dump.
Sorry,
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
Background job getting CANCELLED
hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
"...INDEX...", although the statement is not
inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
"LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ? lit_ekpo_dummy1[] = it_ekpo[].
024310 ? DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ? DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ? REFRESH lit_ematn_dummy[].
024350 ? lit_ematn_dummy[] = lit_ematn[]. -
Hi All,,
We have a job" UPC_BUNDLE_EXECUTE" which is getting cancelled everyday
here ar
Job started
Step 001 started (program UPC_BUNDLE_EXECUTE, variant &0000000000000, user ID )
Global planning sequence was terminated with errors
Job cancelled after system exception ERROR_MESSAGEHi,
I have already checked... but no dumps exits..
but this job is getting cancelled daily...
can anybody throw a light on this...
appreciate your guidance
Regds -
Job getting cancelled with Tbale_illegal_statement dump
hello,
Hi Experts,
i have a background job scheduled for a standard transaction SARA .it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
Information on where terminated
The termination occurred in the ABAP program "SAPLCKMLLAARCH" in
"CKMLLA_INIT_READ".
The main program was "RKSARCDL ".
The termination occurred in line 253 of the source code of the (Include)
program "LCKMLLAARCHF01"
of the source code of program "LCKMLLAARCHF01" (when calling the editor 2530).
The program "SAPLCKMLLAARCH" was started as a background job.
The line it is giving Dump Is > INSERT handle_tab.
I have tried to debug the transaction but the execution is not ata all going to the program
SAPLCKMLLAARCH where it is giving dump.Propably because that program is running in Background.
So please let me know how I can fix this issue..PleaseHi Prashanth,
Were you able to resolve the issue ? Because, i am also facing the same problem, when I am triggering the Delete step for CO_CCMAST archiving object.
Regards,
Shail. -
Background Job get Cancelled when executing the report. Reason?
Hi All,
I have scheduled a Back ground Job and executed Immediately.
when checking transacion SM37 the job get canceled.
How to find out the problem for the Job Cancellation.
Regards,
Vijihi
After scheduling back ground job ( give a time laps of 2 min )
then go to sm37 ( at this moment , the job is not yet started) .
select ur job in sm 37 and when job starts processing , type JDBG as the command and press enter.
Now it will go to the debugging screen, where u will find system program . Now set a break point at the stements used in ur program from the debugging screen itself.( menu - breakpoint- breakpoint at - statement ) and press F8 .
Now you can start debug ur code.
Revrt back if any issues.
Regards,
Naveen -
Job getting cancelled in background scheduling
Hi,
I have written a report in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
Thanks & Regards,
Rahul.Hi,
I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
Hope this helps.. -
Delta uploading job get cancelled in SAP R/3
question, during delta loading from SAP R/3 to BW, if the delta uploading job get cancelled twice for some reason, will I lost some delta data??
Pls advise!
Many Thanks!
rajatina.Hi,
If your delta jobs are getting error out in BW then you don't need to worry about, because till that time your delta pointer in source system is not yet updated. But if you make any request green by chance in BW monitor then your delta pointer will get updated and you might loose some delta.
You can request repeat delta multiple times without any issue.
Regards,
Durgesh.
Maybe you are looking for
-
When I try to set up my wife's Cloud account after upgrading to Mountain Lion, I click on the "send verification email" box, but the email never arrives. Her iPad and iPhone already seem to sync up in the Cloud, but no storage is being used. Any sugg
-
Step by step bapi to convert SAP to XML please its urgent
step by step bapi to convert SAP to XML please its urgent full points if with full example and coding in ABAP, Thank you, Regards, Jagrut Shukla
-
Query about calendar entries - Asha 311
Just purchased an Asha 311 and need some info. about the calendar entries that I made (a To-do list). To the right of the entry there appears a gray-scale dot, which, when touched, turns green. The entry vanishes to the bottom of the list. Touch th
-
Hi, One of my pet peeves about Jdeveloper and by extension of SQLDeveloper is that the file open/save dialog does not have quick way to navigate to familiar places on my computer like "My Documents" or "Desktop". For eg., in Word, I can navigate to M
-
Survey Form at item level is not visible
Hi Experts, I have created two survey forms for lead. I want different survey form based upon item category. But, In my Lead transaction NO survey form is visible at item level. its visible at header level only. I want it at item level. Please help.