Job Termination In the source system (TSV_TNEW_PAGE_ALLOC_FAILED)

Hi Experts,
I have a load in bw which extracts the data from R/3. In the IP selection i have OLAP variable set to 0calmonth and the selection is one month. The loads gets failed with the page allocation error in the source system. I tried reducing the packet size with different option. Still i couldn't complete the load.
If any one come across with this kind of situation please help to resolve this issue.
Thanks
Deepthi

Hi ,
Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
ES/TABLE                    SHM_SEGS
ES/SHM_SEG_SIZE             2048
em/global_area_MB           250
abap/heap_area_total        4000000000
abap/heap_area_dia          2000000000
abap/heap_area_nondia       2000000000
ES/SHM_PROC_SEG_COUNT       16
ES/SHM_MAX_PRIV_SEGS        15
ES/SHM_USER_COUNT          2048
ES/SHM_SEG_COUNT           2048
Need to do a system bounce for the parameter change to take effect.
Regards
Balaji

Similar Messages

Job terminated in the source system

Hi BW ens,
when i try to load data i am getting error as below.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
**when i tried to see in the source system it is showing like :Extrapolation cannot be carried out because no inst. has been allocated"and "ABAP/4 processor: CONVT_NO_NUMBER:**
**pls let me know how to overcome this problem in loading.**
regards
Ravi

Hi Ravi,
U can check the Job logs in SM37 !!!!!
Apart from that i think there is a lock that has occured ,goto SM12 and unlock the objects.
Reload the data at the point where the error has occured ,It should be fine.
Rgds
SVU123

Job failing in the source system.

Hi all,
I am loading data to a data store object from a R/3 system.
The job is failing in the source system with the error - ABAP/4 processor: UNCAUGHT_EXCEPTION
Can anyone help me resolving this error?
Thanks in advance.
Regards,
Deepti.

HI,
This is very generic and seems like a short dump...can you check in ST22 in the source system and see if there is any entry for ALEREMOTE check the the error log and the step where it failed??If you can analyze it and come up with the answers then people can help you here.
Also what kind of data source it is??
Was the load full or delta??
Thanks
Ajeet

How can we change the Job priority in the Source system

Hi All,
We are facing an issue with the process chain execution in the Production system. We have a process chain which runs daily in BI system and the chain is designed in such a way, that as soon as the chain starts in BI system, a corresponding job is triggered in the Source system (ECC 6.0system).
Now the issue is that after we have our Source system upgraded the memory allocation for the particular Job (FIGL )is reduced and due to which the FIGL job is failing frequently. When we have consulted some experts.They advised Us to increase the Priority of the Job in source system to A/1, as of now the job is running in B/2 priority.
Please let us know the way how we can increase the priority of the Source system Job, so that when the process chain triggers a job in source system and that particular jobs should run with Priority A/1.
Thanks in advance.
Regards,
Chandra.

Hi Chandra,
First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
Try these steps, let me know if are able to do so.
Regards,
Ravi Kanth

Job Cancelling in the Source System

Hi,
Few days back (one week) our R/3 System upgraded with ECC 5.0, from that day onwards some of the master data loads failed.Whenever we retriggered the infopackage the Job in the R/3 side was immediately(automatically) cancelled.(we tried 3times).
So, please give any suggestions how to get rid of these errors.
Best Reagards
Shyam/venkata

Hi,
well basically we need some more information. Do you get any job logs, system log entries (sm21) or short dumps (st22) in the source system as well as the BW system? What messages do you get in the request monitor?
Keep us updated!
Siggi
PS: in the meanwhile this might be of some help: /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Message was edited by: Siegfried Szameitat

An error occured in the source system

My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
What should I do to resolve the problem.

For Source system R3 :
This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
In the monitor tab,
Environment --> Job Overview --> In the source system.
After logging into the source system, click execute
Check the status of the job i.e. active or failed.
Check the job log for the same.
If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
The load would be successful
Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
Hope this helps!!!!!!!

Error in the Source system while data loding through Process Chain

Hi,
I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
Regards,
Javed

Hi..
It means that the extraction job is failing in the source system..
Please check the Job log in the source system --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
Look there may be multiple reasons behind this....
1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
2) Or may be work processes are not available and due to which jobs are failing due to time out...
In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
Regards,
Debjani..

Job is not in Active mode, still in Ready mode in the source system

Hi Folks,
Process Chain carrying some data loads asusally today also, i noticed there is no action in the details tabs, then i checked in the source sytem, jobs in ready mode. why it is turned like this.
Can any one provide your valuable inputs on this...
Thanks,
V

Hi ,
Thanks for your quick responce on this..
My issue has been resolved: Issue occured due to in the source system issue. All BW job has been scheduled in one particular application server which is facing more than issue.
Basis team involved and resolved them.

Error message from the source system

Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
Vish

I see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

An error occurred in the source system when running infopackage

Hello,
I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
And i did put in the period in the internal formatfor FROM and TO in the selection tab on the infopakand but I am still getting the same error.
And when i go into details it gives me " Error occurred in the data selection "
Please assist
Thanks

I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
Date        Time      Message
04/03/2009 12:49:29 Job started
04/03/2009 12:49:29 Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
04/03/2009 12:49:29 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
04/03/2009 12:49:29 DATASOURCE = 0CO_PC_PCP_03
04/03/2009 12:49:29 RLOGSYS    = DEVBI100
04/03/2009 12:49:29 REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
04/03/2009 12:49:29 UPDMODE    = F
04/03/2009 12:49:29 LANGUAGES = *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 *          Current Values for Selected Profile Parameters               *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * abap/heap_area_nondia......... 2000683008                              *
04/03/2009 12:49:29 * abap/heap_area_total.......... 2000683008                              *
04/03/2009 12:49:29 * abap/heaplimit................ 40894464                                *
04/03/2009 12:49:29 * zcsa/installed_languages...... 1NEFDIJLPS                              *
04/03/2009 12:49:29 * zcsa/system_language.......... E                                       *
04/03/2009 12:49:29 * ztta/max_memreq_MB............ 2047                                    *
04/03/2009 12:49:29 * ztta/roll_area................ 3000320                                 *
04/03/2009 12:49:29 * ztta/roll_extension........... 2000683008                              *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 Synchronized transmission of info IDoc 3 (1 parallel tasks)
04/03/2009 12:49:29 IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
04/03/2009 12:49:29 IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
04/03/2009 12:49:29 Job finished

An error occurred in the source system, DBIF_RSQL_SQL_ERROR

Dear All,
last 4 days my process chain stop, now todya i activate the process chain. i found a error In 0FI_AR-4.
the error i found
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
i already check in RSA3 , Once execute 0FI_AR_4 I Found a dump
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"BWFIR_READ_BSID_CPUDT_DATA" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"BWFIR_READ_BSID_CPUDT_DATA"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/BKPF_BSID ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU10"
"BWFIR_READ_BSID_CPUDT_DATA"
please any one help on this issue
Advance in thanks
Regards
Priya

Hi,
Can you please try adding the datafile to the PSAPTEMP tablespace in the source system, and try to start the process chain again. If required you have to contact the Basis Administration. Also please find the system logs and dumps in the source system at the point of time.
Can you please let me know if it got fixed.
Thanks & Regards,
VR

R/3 connection to BIW - No Idocs arrived from the source system

Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKy

Hi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky

RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

Hi Experts,
RSA1Source System (Context Menu) Check
I am getting the below error
<b>The BW IDoc type ZSBA011 is not the same as the source system IDoc type ZSBD012               </b>
What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
Where should i check to correct the error
Thanks

Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470      Activities after client copy in BW source systems
325525      Copying and renaming systems in a BW environment
184754      Procedure after BW database copy
184447      Building a BW-system landscape
184971      Notes on BW source system connections
140276      Error in source system assignment
524554      Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken
Message was edited by:
        Patrick Rieken - BI-Formance B.V.

Jobs are cancelled in source system

hI all,
i scheduled process chain. load was chain was failed .failed request is showing jobs are cancelled in source system? why jobs are cancelled in source system & how to solve this error.
Thanks,
chandu

Try to repeat the process manually, as a temporary fix.
Check in SM58 and BD87 for pending tRFCs and IDOCS and puch them using F6
But you can analyze as advised by BR and Venugopal.
Hope it helps,
Naveen
Edited by: Naveen Vytla on Jul 21, 2008 2:46 PM

Job Termination In the source system (TSV_TNEW_PAGE_ALLOC_FAILED)

Similar Messages

Maybe you are looking for