Job to monitor RFC connection

Hi,
Is there any FM, ABAP report or job using which I can monitor the RFC connection of a source system.
Basically I want to define one step in process chain which will check the RFC connection. If connection is fine, then only the remaining steps in Process chain as defined should execute.
Any Idea?
Regards,
Vikrant.

Hi Paolo,
Thx for replying. But I'm not quite sure how to use this FM.
It doesn't have any input parameter. So I cannot give any particular source system name for monitoring if I use it in a ABAP report.
Could you explain a bit more.
Regards
Vikrant.

Similar Messages

How to Alert RFC connection failure via message mapping? Kindly Help!

Hi Experts,
    I have a JMS - XI - RFC scenario.
JMS receives the Rosattenet PIP contents and sends it to RFC function module in remote SAP R/3 system.
   I have a requirement where I have to monitor RFC connection failure because of the remote R/3 system being down. I have to send a email alert where the subject contains the PIP number to understand for which PIP the connection failed.
The PIP number exists in the PIP content at the interface.
If I use the Alert configuration in the runtime workbench for monitoring then I cannot dynamically pass the PIP number.
Only way I think of triggering alert is in the message mapping via a Java UDF.
But I am not sure how can I do this? How do I check in the UDF if RFC connection has failed? Is this the correct approach?
How to acheive my requirement? Note that my email subject content is dynamic bacause if PIP number.
Please help!
Thanks
Gopal
Message was edited by:
        gopalkrishna baliga

Hi Gopal,
what version/sps of XI are u running?
The easiest way to do what u want inside a UDF is to
1. use JCo to try estabilish a connection to the remote SAP System
2. if that fails, use JavaMail to send an email message
Let your UDF work on the PIP number, accepting it as input, and (maybe) returning it as output if everything goes ok. Otherwise break the mapping execution as described by Michal in one of his last weblog (using Dynamic Configuration).
Note that the above method doesn't guarantee that the message will be actually delivered, as some seconds could last between your check and the real RFC delivery operated by the Adapter Engine...
I am evaluating a way to do the same with Alert Framework. I will let you know the result!
Cheers,
Alex

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

Monitoring of RFC Connections

Hi Folks,
is there any option to monitor a TCP/IP RFC connection.
I need something like a heartbeat on a registered program connection.
Something like GRMG for http, just working for RFC.
Is there any standard way to do this or do I need to use OS level tools?
Thanks,
Bastian
Edited by: Bastian Schneider on Jul 3, 2008 9:15 PM

Hi
Please check this note for RFC monitoring
Note 1069130 - RFC Destination Monitoring: Separate Method for Each Dest.
And check for this link for Email configuration
/docs/DOC-8701#section12
Configuring the Sending of E-Mails as an Auto-Reaction

RFC Connection error - Invalid length. Check parameters.

Hi Forum, Good Morning!
My ABAP Program will run in BACK Ground Job Processing(SM37) to download data to Presentation server( Local PC Directory). So I have created a RFC destination type TCP/IP to use 'RFC_REMOTE_FILE' function module in my ABAP Program.
When I am trying to test RFC connection It is giving following error.
ERROR   Invalid length. Check parameters
LOCATION SAP- Server dsapp05_R3D_10 on host dsapp05 (wp 2)
COMPONENT   CPIC
COUNTER   14
MODULE
LINE
RETURN CODE    240
SUBRC                0
RELEASE           640
TIME                   Mon Dec 11 10:08:05 2006
I did following procedure before I test RFC destination..
I have created RFC Destination : BJRFC
Technical Settings: Selected Registered Server Program radio button
Program ID: BJACCESS
Gateway host : 172.22.149.199
gateway Service: sapdp10
In my local machine Copied SAPRFC.INI file from the TEXT folder to the BIN Folder.
Then open the SAPRFC.INI file in BIN folder and Register a RFC server program at a SAP Gateway.
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.rfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.trfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
Then entered below command in dos prompt.
C:\Program Files\SAP\FrontEnd\SAPgui\rfcsdk\bin>rfcexec -aBJACCESS 172.22.149.199 xsapdp10.
so how do i proceed in this kind of case.
any help please.
Thanks in advance.

Hi,
   Just you check whether your program is registered or not.
   If it is registered then you can find in SMGW transaction and go to
   GOTO - Logged on clients
in that you will be able to see your program name if it registers succesfully.
you have typed rfcexec -aBJACCESS 172.22.149.199 xsapdp10
in this way.
In this you have misseg 'g' in front of your sap ip.
Thanks&Regards
Rajehs Balusu

Problem with RFC connection - tp program not registered

Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
Peter

Hi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr

RFC connection from SAP R/3 to OS400 server

Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.

Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind.

RFC CONNECTION BETWEEN DS AND BW

Hi Experts,
I'm facing an issue Loading a BW Cube from Data Services because the RFC connection is lost frequently and to restore it we have to reboot the Data Services server in order to execute the loading job. We've already installed the fix pack 12.2.3 to DS but now we're are watching that strange behaviour.
Then when the data is loaded to the PSA its taking so much time to load this data to the CUBE, for 6 millions records it takes more than 24 hours, its really insane!
Do you know what could be wrong in our deployment????
Thanks and regards,
Julio

Hi, Carlo!
We were encountered the same problem in our project in the end of April. We wrote message to SAP, and still waiting when our customer provide access to supprot team for SAP system.

Deprecated API and RFC connection issues in PI 7.1

Hi all,
I am new to this Forum..
I am working in File to Proxy scenario where i am using UDF to implemnt few functions.
But i am getting the following Error :
Source text of object Message Mapping: MM_FILE_10_943 | urn://fiat.com/mm/if_10_943 has syntax errors:
Function sendMonitor, Line 14:
cannot find symbol symbol : class CallRFCManager location: class com.sap.xi.tf._MM_FILE_10_943_    CallRFCManager rfc=new CallRFCManager();    ^
Function sendMonitor, Line 14:
cannot find symbol symbol : class CallRFCManager location: class com.sap.xi.tf._MM_FILE_10_943_    CallRFCManager rfc=new CallRFCManager();                           ^
Function sendMonitor, Line 17:
cannot find symbol symbol : variable Constants location: class com.sap.xi.tf._MM_FILE_10_943_         if(rfc.connect(Constants.XISYSTEM)){                             ^ Note: /disk2/sap/TX0/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map9c6141de40a611e0ad290000003d38da/source/com/sap/xi/tf/_MM_FILE_10_943_.java uses or overrides a deprecated API. Note: Recompile with -Xlint:deprecation for details. Note: /disk2/sap/TX0/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map9c6141de40a611e0ad290000003d38da/source/com/sap/xi/tf/_MM_FILE_10_943_.java uses unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. 3 errors
The code i am using is:
   //write your code here
   // INPUT: activate ; id; descrizione
   AbstractTrace trace;
   String messID;
   java.util.Map map;
   trace = container.getTrace();
   map = container.getTransformationParameters();
   messID = (String) map.get(StreamTransformationConstants.MESSAGE_ID);
   CallRFCManager rfc=new CallRFCManager();
   if (a.equals("true")){
        if(rfc.connect(Constants.XISYSTEM)){
              try{
                    rfc.traceMonitor(messID,b,c);
                    trace.addInfo("Ok trace monitor");
                    rfc.disconnect();
              } catch (Exception ex) {
                    trace.addInfo("Errore in sendMonitor CAUSA:" + ex.getMessage());
                    rfc.disconnect();
        }else{
                  trace.addInfo("Errore in sendMonitor CAUSA: errore sulla connessione ad XI");
   return a;
Pleasae help me ....what is the reason for this ???

Hi ,
the package com.fiat.sapiens.udf.* is saved in the IA_JAVA.zip file.
I imported it in the imported archive and added this jar in the import tab of function library
i also added ti in the archive used tab in function.
But still it is showing this Error.
under IA_JAVA.zip i have testJCO.java which has the folowing code:
package com.fiat.sapiens.xi.udf;
// Referenced classes of package com.fiat.sapiens.xi.udf:
//            CallRFCManager
public class TestJCO
    public TestJCO()
    public static void main(String args[])
        System.setProperty("SAPSYSTEMNAME", "DX0");
        CallRFCManager rfc = new CallRFCManager();
        rfc.connect("XI");
        try
            rfc.schedNR("10", "20", "30", "40", "50", "60");
        catch(Exception e1)
            e1.printStackTrace();
        if(rfc.connect())
            rfc.connect();
            try
                String a = rfc.checkRARCRE("ZZ");
                System.out.println(a);
            catch(Exception e)
                e.printStackTrace();
        System.out.println("");

Unable to open RFC connection - Err message

I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
 shared lib "dw_xml.dll" version 43 successfully loaded
 shared lib "dw_xtc.dll" version 43 successfully loaded
 shared lib "dw_stl.dll" version 43 successfully loaded
 shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....

Hi Juan 
I am sending you the log from dev_w0 
 
Thank you a lot, 
Vasil
 
 
 
trc file: "dev_w0", trc level: 1, release: "640" 
 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
B 
B Mon Jul 27 11:24:53 2009 
B create_con (con_name=R/3) 
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ... 
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded 
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43) 
B New connection 0 created 
M systemid 560 (PC with Windows NT) 
M relno 6400 
M patchlevel 0 
M patchno 43 
M intno 20020600 
M make: multithreaded, Unicode 
M pid 3740 
M 
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160] 
I MtxInit: -2 0 0 
M DpSysAdmExtCreate: ABAP is active 
M DpSysAdmExtCreate: JAVA is not active 
M DpShMCreate: sizeof(wp_adm) 10528 (1316) 
M DpShMCreate: sizeof(tm_adm) 2780232 (13832) 
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) 
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) 
M DpShMCreate: sizeof(comm_adm) 290000 (580) 
M DpShMCreate: sizeof(vmc_adm) 0 (372) 
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) 
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688) 
M DpShMCreate: allocated sys_adm at 060C0040 
M DpShMCreate: allocated wp_adm at 060C1B58 
M DpShMCreate: allocated tm_adm_list at 060C4478 
M DpShMCreate: allocated tm_adm at 060C44A0 
M DpShMCreate: allocated wp_ca_adm at 0636B0E8 
M DpShMCreate: allocated appc_ca_adm at 06370EA8 
M DpShMCreate: allocated comm_adm_list at 06372DE8 
M DpShMCreate: allocated comm_adm at 06372E00 
M DpShMCreate: allocated vmc_adm_list at 063B9AD0 
M DpShMCreate: system runs without vmc_adm 
M DpShMCreate: allocated ca_info at 063B9AF8 
M DpShMCreate: allocated wall_adm at 063B9B00 
X 
X Mon Jul 27 11:24:54 2009 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
M <EsNT> Memory Reset disabled as NT default 
X ES initialized. 
M 
M Mon Jul 27 11:24:55 2009 
M calling db_connect ... 
C Thank You for using the SLOLEDB-interface 
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' 
C dbmssslib.dll patch info 
C patchlevel 0 
C patchno 43 
C patchcomment View with literal containing (0x60) (786638) 
C np:(local) connection used on UPAYWEB1 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Provider Release:9.00.1399.06 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes 
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process. 
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft 
C pn_id:UPAYWEB1_UFTUFT_UFT 
C Not using MARS (on sql 8.0) 
B Connection 0 opened 
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost 
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 
C The IRow interface is supported by this OLEDB provider 
M db_connect o.k. 
I MtxInit: 0 0 0 
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000) 
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200) 
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280) 
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610) 
M SHM_PAGING_ADM (addr: 0F850040, size: 525344) 
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040 
M ThCreateNoBuffer index size: 3000 elems 
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
X ES initialized. 
C 
C Mon Jul 27 11:24:58 2009 
C The IRow interface is supported by this OLEDB provider 
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448) 
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 14304000 
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8) 
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 5047296 
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Reading TBX statistics: 
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory). 
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory). 
B dbtbxbuf: 0 object entries precreated 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ] 
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017 
C DbSlRead - Error 103 (dbcode 208) on open 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
C DbSlRead - Error 103 (dbcode 208) on fetch 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ] 
B db_syinit failed 
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252] 
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901] 
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359] 
M in_ThErrHandle: 1 
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413] 
M 
M Info for wp 0 
M 
M stat = 4 
M reqtype = 1 
M act_reqtype = -1 
M rq_info = 0 
M tid = -1 
M mode = 255 
M len = -1 
M rq_id = 65535 
M rq_source = 255 
M last_tid = 0 
M last_mode = 0 
M int_checked_resource(RFC) = 0 
M ext_checked_resource(RFC) = 0 
M int_checked_resource(HTTP) = 0 
M ext_checked_resource(HTTP) = 0 
M report = > < 
M action = 0 
M tab_name = > < 
M 
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0) 
M * ERROR tskh_init: ThIPCInit 
M * 
M * TIME Mon Jul 27 11:24:58 2009 
M * RELEASE 640 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 17 
M * MODULE thxxhead.c 
M * LINE 9589 
M * COUNTER 1 
M * 
M ***************************************************************************** 
M 
M PfStatDisconnect: disconnect statistics 
M Entering TH_CALLHOOKS 
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP 
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730] 
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252] 
M Entering ThSetStatError 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]

Solution Manager 4.0 - RFC Connections

hi there,
While ago I configured all my RFC connections within Solution Manager 4.0, and wanted to make sure what are those for:
1. RFC BACK connection (SM_<SID>CLNT<Client no.>_BACK) is used for the SDCCN to collect the session data. But I realized it is also used for Service Desk when users attempt to create support messages from the satellite system. Is this OK?
2. The other RFC connections (SM_<SID>CLNT<Client no.>_LOGIN, SM_<SID>CLNT<Client no.>_READ, SM_<SID>CLNT<Client no.>_TMW, SM_<SID>CLNT<Client no.>_TRUSTED) I am not sure whether they are used and where.
Can somebody please give me a light in this matter? because I think this is bringing me issues in other solution manager features :-S
Thanks a lot.
regards
Katia.

Hi there again,
Thanks very much. It is more clera; just one last question. Then what RFC destination should I use in my satellite system, the one: SM_<SID>CLNT<Client no.>_BACK or SM_<SID>CLNT<Client no.>_TRUSTED ?
And using one of those, with no log on screen option, would make me add the corresponding user profile (for example for create support messages) to the user inserted in such a RFC connection in the "logon data" tab right?
I am using now SM_<SID>CLNT<Client no.>_BACK withtout log on screen option, and the user which is inserted in this RFC connection has the appropiate profiles, but message are created incomplete (I got this error message: "error in local system, message 0000165 incomplete"). I can see those messages from DNOTIF transaction but not from transaction monitor...
How you do this? Because it used to work using same RFC connection (SM_<SID>CLNT<Client no.>_BACK) but with log on screen, so the user was prompted for logging and messages were created succesfully; but then since this rfc connection is also used by SDCCN the data was not being collected, since the log on was required :-S
That is what I changed to no log on screen, and got confused about these RFC connections thing...
Do you have an idea about this?
And thank you very much in advance again.
regards,
Katia.

Creation of System Landscape though SMSY and RFC connection

Hi all,
I've finished install the solution manager 4.0 with Oracle 10g running on Windows Server 2003.
i would like to know after i create the RFC connection using SM59 to my TST system which will be the system that i'd plan to monitor. The authorization test seem to be failed but others connection like connection test and remote logon seem to working fine.Please kindly advise which sort of user i need to give. I receive the message "Error Details-You are not authorized to logon to the target system (error code 1)."
And at the SMSY, i cant even see the TST system.And i don know where we should create the TST system. And i wuold like to know where i can make changes to the Technical data tab for my solution manager ipaddress,beacase it has tied up to the Microsoft loopback connection.
Please kindly assist.Thank you.
Kah Fei

Go to transaction SMSY
Here, towards the left hand side you will see menu with tabs of 1. Landscape Components
        2. System and Logical Components
        3. Product Definitions
        4. Overview
Select the second tab.
It will show list of all SAP Products available, if you are linking an SAP R/3 system to Solution Manager, then select the SAP R/3 from the list. And if you have already created the server and its details, they wil appear in the list here.
Try this out.
Thanks,
Anil Santhapuri

SAP R/3 installation - FRF-00007 Unable to open RFC connection

Hi all
I install SAP R/3 Enterprise SR1 with SuSE Linux Enterprise server 9 and SAPDB 7.3.28. At the end of the installation exactly on the " Starting RFC Jobs (post processing" the following problem begins.
in the LOG INSTALLATION PROGRESS
See '/sapmnt/RRP/exe/startsap all DVEBMGS00' output in '/sapinstdb/startsap.log'.
INFO 2006-07-27 16:50:47
'/sapmnt/RRP/exe/startsap all DVEBMGS00' returned with '0'.
PHASE 2006-07-27 16:50:49
Prepare Starting RSWBOINS, RADDBDIF
INFO 2006-07-27 16:50:49
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59
FRF-00007 Unable to open RFC connection.
ERROR 2006-07-27 16:50:59FRF-00063 RFC logon failed with message: Connect to SAP gateway failedConnect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
ERROR 2006-07-27 16:50:59
FJS-00012 Error when executing script.
IN THE SHELL - KONSOLE
TRACE [iaxxccntrl.cpp:595]
 CController::stepExecuted()
The step StartSAPSystem with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPInstancePrepare|ind|ind|ind|ind|ind|0|StartSAPSystem|ind|ind|ind|ind|ind|0|StartSAPSystem has been executed successfully.
TRACE [iaxxejsexp.cpp:138]
 EJS_Installer::writeTraceToLogBook()
t_SAPComponent_SAPSystemLogon_SHARED.insertRow(), inserting
TRACE [iaxxccntrl.cpp:595]
 CController::stepExecuted()
The step sCopytSAPSystemsLogon with key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Rfc_Jobs|ind|ind|ind|ind|ind|0|sCopytSAPSystemsLogon has been executed successfully.
PHASE 2006-07-27 16:50:49 [iaxxccolwk.cpp:328]
 CCheckCollectingWalker::printPhaseInfo()
Prepare Starting RSWBOINS, RADDBDIF
TRACE [iaxxclib.cpp:56]
 load()
Opened iamodrfc.so
TRACE [iaxxejsexp.cpp:138]
 EJS_Installer::writeTraceToLogBook()
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction begin ********************************************************
TRACE [iaxxbrfc.cpp:119]
 CIaRfc::CIaRfc
Instance for SAP system module was created.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT was set to value 000.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER was set to value DDIC.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS was set to value 1.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG was set to value EN.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST was set to value rpone.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:431]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR was set to value 00.
INFO 2006-07-27 16:50:49 [iaxxrfcimp.cpp:571]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-07-27 16:50:59 [iaxxrfcimp.cpp:481]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE [iaxxrfcimp.cpp:482]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE [iaxxrfcimp.cpp:485]
 CAbRfcImpl::openRfcConn
Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
ERROR 2006-07-27 16:50:59
 CJSlibModule::writeLogEntry()
FRF-00063 RFC logon failed with message: Connect to SAP gateway failed
Connect_PM GWHOST=rpone, GWSERV=sapgw00, ASHOST=rpone, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Thu Jul 27 16:50:59 2006
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -6
MODULE niuxi_mt.c
LINE 1237
DETAIL NiPRead (0.0.0.0/0)
SYSTEM CALL recv
ERRNO 104
ERRNO TEXT Connection reset by peer
COUNTER 3
Transaction end **********************************************************
TRACE [iaxxejsbas.hpp:156]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown exception
ERROR 2006-07-27 16:50:59 [iaxxejsctl.cpp:241]
 EJS_ControllerImpl::executeScript()
FJS-00012 Error when executing script.
TRACE [iaxxgenimp.cpp:428]
 processUserInput()
got notification...
TRACE [iaxxsubjct.cpp:58]
 notify()
releasing notifyLock
DO YOU HAVE SOME IDEA; HOW I CAN SOLVING THIS PROBLEM
Thanks
Jose Marcos

Hi Johanes
Thank you very much fot your email
Sorry Im new in this Installation
I have some questions.
I see the SPdent, and I dont have any SP Installed
In the etc/host I have:
hosts This file describes a number of hostname-to-address
 mappings for the TCP/IP subsystem. It is mostly
 used at boot time, when no name servers are running.
 On small systems, this file can be used instead of a
 "named" name server.
Syntax:
IP-Address Full-Qualified-Hostname Short-Hostname
127.0.0.1 localhost
special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
192.168.101.29 rpone.local rpone
I need to install the SP?
What IP I need to delete ?
Regards
Jose

Abour Solution Manager RFC connection

Hi, All
About soulation manager 4.0, I got configuration guide to setup "Real time system Monitoring"
as per user guide -> create RFC connection and setup system monitoring, it make me little bit confousing
currently Solution manager setup for earlyWatch report and works fine.
WHAT I WANT ?
To seutp/configuration "REAL TIME SYSTEM MONITORING" for XI 3.0 and CCMS monitoring in Solution manager
T-code: SMSY shows this screen:-
There are 5 different types of Tab after apply SMSY
1. Landscape Components
2. Database
3. System Group and Logical Components
4. Product Definitions
5. Overview
I am not sure where I create RFC connection and what value will i put in it?
1. Landscape components shows under: all others server name list
   SERVER
     shows server host name: (r5wxw0) and right side windows shows
     data source RFC
     and Technical Data Tab shows all others value (that system I like to monitor)
2. DataBASE (all others application server name)
     IDV
       Header Data Tab
       Data Source: TMS/RFC
3. System Group and Logical Components (under)
   Project Landscapes
   Solution Landscape - operation
   Logical components
4. Product Definitions (under)
   lot of product list
5. Overview
     Server
     Database
     Systems
Now where sould I go to configure CCMS monitoring ?
Thanks in Advanced
Travis

Hi user issue2008 issue
actually i can't connect to solman, but i think it was under 3.
When you select a component, i.e. Dev R/3 or so you should have several clients.
There you can define RFCs and also there you can define Solution Monitoring.
But I think there should be already RFC-Destinations, when you had configured the EWA.
Then you should check the client with the RFC-Destination and Checking Destination.
In Edit-mode you can check the box for Solution Monitoring and save and ok.
After that it should be activated.
Hope it helps you.
Regards,
René

RFC connection BI and ECC 6.0

Hi
I am trying to connect BI and ECC 6.0 at home on two different virtual machines for data extraction and practicing delta management ( they are on the same virtual network).
I am following these steps :
Step-by-step procedure to connect BI with ECCu2026
Define the logical system in R/3 using the transaction code SALE in both the systems (ECC and BI)
Assign Logical System to a client using transaction code SCC4 in both the systems (ECC and BI)
Setup the RFC Destination using transaction code SM59 in both the systems (ECC and BI)
Hit Transaction BD64 and Click Create model view - Enter the Short text u2013 Enter the Technical name u2013 Hit Execute - Distribution Model will be created and the technical name of the distribution model will be listed
Place the cursor on model created and and click Add message type button on the top right corner
Enter sender and receiver system IDs and select the correct message type assigned to the correct system
Distribute this model using Edit u2013 Model View u2013 Distribute
Select the receiver of the model view and proceed to distribute the model
Please note that the distribution of data model is not required to repeat in BI system as this step automatically replicates settings in BI
You have to generate partner profile for each system with which your system communicate using BD82
Outbound records are created in the partner profile for each outgoing message and inbound records are created for each incoming messages
You can view the partner profiles generated using the transaction code WE20
Message Types:
RSRQST: This message type is send by BI to R/3 while loading any data. This gives information about the data source, selection condition and other BI settings to R/3. As and when a load is started in BI, RSRQST message type is sent to R/3 requesting for data.
RSINFO: Once R/3 receives RSRQST message from BI, it sends an acknowledgment message type to BI informing about the status of the request. That is whether the request can be handled or not by R/3. It also gives information about how many data packages are being send and what is the total number of records extracted for the given data source and selection.
RSSEND: After sending a positive acknowledgement to BI, R/3 starts the extraction job and starts collecting data in data IDocs. This message type carries the actual data with it into the BI system.
My question is that : Do i know need to create three model views for these three message types?? Are these steps sufficient?
Please let me know if some other things needs to be followed or U know more simpler way to RFC connect so that I can pull data from ECC into BI and practice delta management.
Thanks
Edited by: max.sap on Apr 28, 2011 8:24 AM

Hi Niru,
Have you created a
[RFC destination in NW Administrator?|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]. Have you created a [BI System connection?|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
Best regards,
Dharmi

Job to monitor RFC connection

Similar Messages

Maybe you are looking for