Job was not triggered in Bw

Hi experts,
Iam facing one issue.The job is triggered by an event  which I believe is linked with the load of volumes from BW into the local cost table in R/3.This never happend in BW and therefore the job was never triggered in BW since Jan 2008. The problem could be related as well with the caculation of the dates by using the variable table  when the year changed from 2007 to 2008.
The ODS is transactional one and it contains volumes data.Please help me out in this issue.
Regards
Sindhu

Hi,
Please check with ST05 or ST03 or STAT
or use Coverage Analyser
aRs

Similar Messages

  • F110 APP run - Payment run has been scheduled, but job was not released

    Dear Friends,
    We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
    Parameters have been entered
    Payment proposal has been created
    Payment proposal has been edited
    But when we selected payment run, immediately it showed the below status:
    Payment run has been scheduled 17.01.08 12:59:55
    Job was not released
    Also I'm not able to delete the Payment run made, fields are in disabled mode.
    Please guide me how to resolve this issue.
    Thanks in advance for your help.
    Regards,
    Dwarak.

    Dear Supriya,
    Thanks a lot for your immediate response.
    Still the same problem is existing even after one and half hours.
    ie.,
    Payment run has been scheduled 17.01.08 12:59:55
    Job was not released
    Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
    As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
    Thanks again.
    Regards,
    Dwarak.

  • Proposal has been sheduled, job was not released

    Dear Fi Experts,
    In F110- Automatic payment process, while creating proposal the system throwing error
    Proposal has been shedulded 03.03.11 10:06:27
    Job was not released
    Parameters maintained in the prosal is correct, payment method, vendor balance  and additional log
    while saving the prosal  system throwing the error. Same i tried in the quality server its working fine.
    Can you explain why it happens?
    Thanks and Regards
    J.Francis

    Hi J. Francis,
    It can be some authorization issue, I recommend you to check this with your basis team.
    Also check these authorization objects:
    S_CTS_ADMI
    S_BTCH_ADM
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • F110 - Job was not released

    Hi All,
    While running F110 we got the below message:
    <i>Parameters have been entered
    Proposal have been schedule 03/28/2007 14:22:28
    Job was not realeased.</i>
    Please let me know the cause of this error.

    Hi,
    Delete the proposal and schedule it again.
    Murali.

  • BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

    Hello,
    To generate the log report, /VIRSA/ZVFATBAK program is scheduled on hourly basis but some time report doesn't get generated and if we see the background job then it shows sucessfully finished.
    If we see the maually the log report for FFID then below error message is displayed.
    " BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED"
    Can anyone guide me to solve the issue.
    Thanks in advance.
    Best Regards,
    Prashant Dubey

    Hi,
    once chk the status of the job by selecting that and check job status(cltr+shift_f12)
    since it was periodically scheduled job there will be a RELEASED job after every active job..
    so try to copy that into another job using copy option and give some new name which u have to remember...
    the moment u copy u can find the same copied job in SCHEDULED status...
    from here, try to run it again on hourly basis....
    After copying the job u can unschedule the old released job to scheduled otherwise 2 will run at a time...
    rgds,

  • The SSP Timer Job Distribution List Import Job was not run.

    The SSP Timer Job Distribution List Import Job was not run.   Reason: Logon failure: the user has not been granted the requested logon type at this computer
    We are facing the above mentioned problem . I have added the service account in backup operates and did everything like update farm credentils , update managed account etc , but still no luck . Please note that we haven't done any chnages to the account
    Application pool is keeping going into stop mode when we try to access the site . Both CA and webapplication are down with the error as Service Unavailble . Please help
    Srini

    sounds like the account can only be used on certain COMPUTERS ("has not been granted the requested logon type
    at this computer")... check active directory.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • It keeps on saying print job was not accepted

    I kept on trying to print out my project from school on pages but it kept saying print job was not accepted. What do I do?

    Hey mellyk99,
    Thanks for the question. After reviewing your post, it sounds like you are having trouble printing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Troubleshooting printer issues in OS X
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • GRC FF 5.1 BACKGROUND JOB WAS NOT SCHEDULED/LOG FILE NOT YET GENERATED

    I've had FF installed in prod for 4 days. I just now got around to running the /VIRSA/ZVFATBAK job. However it only generates the logs for the last 24 hours. I know when you schedule the batch run to run hourly this will be resolved but I wanted to run the /VIRSA/ZVFATBAK job manually the first time because I knew it would take longer than an hour. Is there a variant I can use in SE38 to get these earlier logs generated?
    thanks for your help
    Dave wood

    You can create your variants in SE38. It does not come up with the programs. For Spools, you can get upto 3 days of logs while for the work logs, it will be a week max. But, i think you can change the system parameters in such a way you can retrieve the logs of the jobs for more than a week.
    Thanks
    Sudhan Shan

  • For a PO with item catagory S user exit was not triggering

    HI SDN,
    I wrote a code for invoicing plan in EXIT_SAPLMRMP_001 for block the payment with INVOICE VERIFICATION block .
    it is working fine for a PO with item catagory Blank
    and not working for item catagory S.
    please suggest me is there any solution for this?

    y

  • Canon mf8580 was working with my iMac and not all print jobs say.....print job was not accepted

    can u help

    Hi mg!
    I recommend deleting and adding the printer back to the print queue, by following the instructions below:
    1. Open [System Preferences] -> click [Printers & Scanners].
    2.  Select the MF8500 Series, and then click the [-] sign under the printer.
    3.  Restart the computer, and then return to the [System Preferences] > [Printers & Scanners] window.
    4.  Click the [+] to add the printer.  Select [Select Printer Software] under [Use], and then select the [Canon MF8500 Series].
    5.  Print a document.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Background Scheduling is not triggered

    Hai all,
    We are doing ecc6.0 upgrade from 4.6c. While creating a production order the order number should be automatically updated in a z-table(using user wf_batch).
    For this they are using a Function module which is scheduled for every 5 min. The FM is stored in a business object.
    But whenever we create a production order, the background scheduling was not triggered.
    We are not able to find the program for this scheduling.It shows no jobs were found.
    How to schedule the Function module or the business object? or is there any other way to execute the business object or find the job in SM37?
    Regards,
    Kumar C

    Hi,
    We are implementing OWS. We have successfully installed and deployed OWS but yet to open the OWS applicaation. we are defining the entire CCD parameters. Apprreciate help on the same, whether you have have any setup document. A business flow or the process flow on OWS.
    Sincerely appreciat your help. My id: [email protected]
    Regards,
    Abhijit

  • Process chain was not getting trigerred

    Hi Experts,
    Chain "Weekly MSA Loads - Full Process" is not getting triggerred.
    This chain is set to run after completion of ABAP program.
    On 16th Jan, ABAP ptogram was successfully completed.Then ""Weekly MSA Loads - Full Process"" chain status was set to running (yellow). But no job was created. It got hung for more than a hour.
    So we tried to trigger that chain with immedaiate option. We got an option "Server for scheduling". We didnt provide any server name. Then pressed Ok button. From then onwards, server went to refreshing state, but no job was created(BI_PROCESS_TRIGGER) and chain is not at all getting trigered.
    We got the follwwing messages:
    01/24/2009     06:49:48     Job started     S     00     516
    01/24/2009     06:49:48     Step 001 started (program RSPROCESS, variant &0000000655878, user ID BWREMOTE)     S     00     550
    01/24/2009     06:50:05     Communication buffer deleted from previous run 4CIS92GCZ3HQ5WVXKADF85TFQ (status X)     I     RSPC     87
    01/24/2009     06:50:05     Version 'M' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
    01/24/2009     06:50:05     Version 'A' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
    So we cancelled that step (STOP transaction). From that day onwards this chain is not all getting trigerred in any way. We have checked the status of last log in RSPROCESSLOG table, its status is 'X'.
    Please let us know to trigger this chain.

    Hi........
    U told a program gives trigger to this Chain.............that means the Process chain is event based..........just right click on the Start process >> Change Selections >>  Click on After event.......just cross check.......
    Now copy the event from there..........Just to cross check that whether this event is a part of any Event collector or not.............this may be one of the possibilities............bcoz........if this Event is a part of an event collector..........then until all events get regisretered..........this chain will not trigger........So......Go to SE16 >> table name RSEVENTHEAD >> there in the EVENT field give the event name >> execute............if it is a part of a event collector..............Copy the event collector name from there........
    then go to RSA1OLD(if u r in BI 7.0 .....otherwise RSA1)............in the top TOOLS tab >> Event collector >> Press F4 in the Event Chain(Name) field........search for the event collector name here...............now check whether all the events got registered or not...........
    Now look..........BI_PROCESS_TRIGGER is the trigger job............after completion of this job only the  chain will trigger......How u checked that the job was not started...........in SM37?..........look if so ..then there will be many BI_PROCESS_TRIGGER jobs............it is quite difficult ti identify the right job..........So the best way is.............right click on the Start process >> Display messages >> BacKg tab >> Click on Batch Monitor.................there u will be able to find the BI_PROCESS_TRIGGER which is going to trigger that particular chain..............u r saying the job did'nt started.............was the Start process in release state............this may happen.............if load is huge at that time in the system............I mean if many jobs trigger at a time..........there will be no free work process........
    Sometimes the chain may start when the loads will reduce.............otherwise u should contact the basis people................
    Anyways............u trigger the JOb manually right.........here I want to tell u one thing..............never Scedule a time based or Event based chain by right clicking on the Start process........and from there Change selection..............I mean to say never change the Start variant..............What u should always do...............go to the Planning mode of the chain.......Right click on the stsrt process >> Display scheduled Jobs >> Take one Released job..........in the top Job tab >> Repeat scheduling >> Immedite >> Uncheck the periodic job Check box >> Check and save.........
    If u do in this way.............the original settings of the chain will never change............what I guess .........that the Event is removed fro the Settings of the Start Variant..........again u hav to schedule the Chain.......
    Hope this helps.........
    Regards,
    Debjani......

  • Water sensor not triggered

    dropped iphone in water no warranty how much will it cost??
    The water sensor was NOT triggered. Will Apple replace it for free or will I have to pay? How much would i have to pay? Ive heard 200 and 700USD please help meeeee!

    No, you already admitted you dropped it in water and started having problems after doing so. Have you checked the moisture sensor with a  blue-filtered flashlight? Because they will at the Apple Store.
    How is your dropping your iPhone in water going to be Apple's fault? Did Steve Jobs knock it out of your hand?

  • EM12c: OS Command job stopped, not being rescheduled?

    This morning I had an OS Command job running long (normally < 10 seconds, this time over 20 minutes). This job is scheduled to run every 10 minutes, so there were 2 skipped executions.
    As with similar jobs, I stopped the run, expecting it to be rescheduled per the defined interval. However this job was not rescheduled and hasn't run since I stopped it this morning. Like I said, other jobs that ran long last week and were stopped were automatically re-scheduled per the job definition schedule. I cannot find why this job has not been re-scheduled.
    Any thoughts?

    Don,
    There is a semantic difference when you stop a job or when you stop a specific execution of the job. User can stop a job from job activity page stop button or using "Stop Job" button on job results page. User can stop a execution by using "stop" button after selecting a job execution in specific job results page.
    In former case job engine would stop the whole job and job will not be scheduled in future. However when you stop a specific execution of job, then job engine consider it as user is intending to stop only the current execution of the job so future run of job will continue to work as is.
    I agree from end user perspective - the message on the confirmation screen is not very clear and we will file a bug and fix in next scheduled version of Enterprise manager.
    -- Ashutosh

  • Workflow not triggered..in client server

    Hi Friends..
    i have developed one workflow for po release in local system it works fine..
    But i developed the same workflow in client system it was not triggered..
    i checked in swue the event was triggered perfectly..
    But the workflow not triggered.. if i click the workflow overview in me23n it shows
    "there are no workflows that are already worked with this object" so i dont know why this problem..' occur.. this problem arises at the time time of development in local system.. but now it was cleared..at that time release strategy not maintained.. but now release strategy also maintained.. but i dont know the exact reason and how can i solve this kind of issue...
    so anyone help me..urgent issue..
    Thanks in advance
    Gowrishankar

    What is the message that you are getting for the event? Is it "No receiver entered" or something else?
    Check for the event linkage between your event and workflow in SWE2. If it is not set select the checkbox "Linkage Activated" and acitivate the linkage and then try to trigger the event.
    If your event linkage gets deactivated everytime you  try to trigger the event, there could be some problem in binding from your event to workflow container. Check if all mandatory parameters in workflow receive data from event container.
    Thanks,
    Prasath N

Maybe you are looking for