Jobs are going to released state after the PC triggers with user event.

HI BI experts,
We are facing issue with event scheduler using user event in the process chains. Some Jobs are not starting immediately with the event and reaching release state. These released jobs are never starts in near future. Also cannot start manually due to event periodic jobs.
No log is availble in SM61 due to settings.
Please let me know your suggestions and this issue.
Regards,
Mohan.

Similar Messages

Call remains in "conferenced" state after the call is released

We have a scenario where a lengthy recorded message is set up through a ICM call routing script. If we call the number we assigned to the script using our hard phones the call is disconnected as soon as the recorded message is finished playing.
When we use Cisco Administrator Desktop and the conference feature, the call remains in the "conferenced" state after the call has been released.
My assumption was that our reports would be smarter than CAD and would get it right. However, reporting agrees with CAD, it thinks the call remained on a conference call for the whole time.
In the script we set some variables for the call, play the message through "RunExtScript" node, set a call type, than use the "ReleaseCall" node to disconnect the call. Any ideas how we can configure the script other than this?

Hi,
can you tell us more - do you have Translation Routing set up, perhaps?
Also, can you take a look at the Router Log (on the Distributor server).
And please swith the script to Monitoring mode to see where it fails.
G.

Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Why does a VRRP master with preemption disabled regain master state after the reboot ?

Q: Why does a VRRP master with preemption disabled regain master state after the reboot?
A: This issue is found in the following scenarios:
1. When spanning tree is disabled on either of the VRRP controllers but enabled on upstream switch(es).
2. When the controller(any one VRRP controller) and upstream device(s) run different versions of STP.
3. STP convergence time is different across the VRRP controllers.
In these scenarios, rebooted vrrp master is expected to come back as vrrp MASTER as the link takes some time to converge and fail to receive VRRP advertisement packets from its peer and may roll back to MASTER.
Trigger for this is, since STP is enabled on intermediate switch and disabled on controller, switch is taking some time ~30 secs to converge the link while port on the controller has become UP and fail-over to Master due to
not receiving VRRP advertisement packets
In all these cases, it is advised to enable holdtime to mitigate issue. Holdtime has been introduced to tackle this issue in the "preemption disabled scenario".
Configuration via CLI:
(controller) (config) #vrrp <id>
(controller) (config-vrrp)#holdtime
Description:
The VRRP virtual router does not begin listening to advertisements until the holdtime expires. If your deployment includes a VRRP master with preemption disabled and an uplink switch is running RSTP, a higher value will prevent the VRRP master from regaining the master state after it reboots.
Range: 30 - 120 seconds
Default: 45 seconds

Hey Jim,
Thanks for the follow-up. Here are some more details:
OS - 10.8.2
FCP X - 10.0.7
I can't update either of these because of my Avid installation.
Something else I didn't mention – this happens in a 4K project. Notice how a default Zoom title looks:
Lines 1 and 2 are almost stacked on top of each other.
Here's my title style:
Here's what the title looks after I apply the title style, modify Line 1, and remove the contents of Line 2:
And here's how it looks in the exported master file MOV:
Notice how it's pushed down?
Then I decided to make a 720p project. No more title problems.
So if you have some 4K footage, Jim, give it a go. Or if there's another 4K-er out there, try this and let me know.
Thanks!

Is apple are going to release any low budget phone?

i had seen an article few day back in an indian news papper that apple are going to release the lowbudget phone which names iphone light ,is it true?

There is a new device called the 'iBrick', which retails for about well, about $5, and it is created by putting an unauthorized operating system on your device. It's primary purpose is as a paperweight, and it's available pretty much everywhere.

My photos are out of chronological order after the os 5 upgrade. How can I get them back in order?

My photos are out of chronological order after the os 5 upgrade. How can I get them back in order?
If its not possible, how do I go back to the old os?

I had tried that several times with no luck. Late last night I was finally able to get through to the Verizon technical support who then called in Apple technical support. It took 1 1/2 hours for them to figure it out and guide me through a fix. So here's the deal .......... I use Yahoo mail and had left the "contacts" button in the on position. Apparently Yahoo likes to go into your contacts and gather information and can leave it in shambles. My advice is, go to settings, then mail, contacts, calendars. Select any and all of your email accounts and go in and turn off their access to your information. Leave it on for Icloud but none of the others.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

I have a 3GS. The iPod on the phone has made duplicates of some songs. I've tried using the "get info" dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes they are still there.

I have a 3GS. The iPod on the phone has made duplicates of some songs. I’ve tried using the “get info” dialog box to set all the information the same but the dups are still there. Even after erasing all music with iTunes, iTunes is empty but they are still on the phone.

Some Users have reported that a Restore as New has Resolved Issues after the Upgrade...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

SQL2314W Some statistics are in an inconsistent state. The newly collecte

Hello,
we have a DB2 V8.2.2. We are using the autmatic runstat feature. We sometimes get the following message in the db2diag.log
Any idea?
Regards,
Alexander TUerk
2006-12-13-08.12.48.738162+060 I2581966A567       LEVEL: Warning
PID     : 913626               TID : 1412        PROC : db2hmon 0
INSTANCE: db2ph2               NODE : 000
APPID   : *LOCAL.db2ph2.061213071307
FUNCTION: DB2 UDB, Automatic Table Maintenance, AtmTable::runstats, probe:600
MESSAGE : ZRC=0x0000090A=2314
DATA #1 : <preformatted>
AutoStats: Non zero (2314) return code from Runstats
SQL2314W Some statistics are in an inconsistent state. The newly collected
"TABLE" statistics are inconsistent with the existing "INDEX" statistics.
SQLSTATE=01650

Alexander,
please look in the SAP Hint 533589.
best regards,
Joachim Müller

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

Moving a library: Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive. Hold down the option (alt) key (shift on Windows) and open iTunes. At the prompt to create or choose a library choose the copied iTunes folder.

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

nope all my songs are copied and organized into the iTunes library.

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.

I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!

First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice.

HT4914 If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

If I do not resubscribe after the first year with itunes match will any songs that have been upgraded in quality lose this upgrade or will it remain?

Dottie,
If you want to upgrade the quality of a song in your library, you have to delete the library copy and download the matched copy.
Once it is downloaded, it will stay in your library even you don't renew Match.

Log on the other computer with user name and password

How to use labview to write a software to log on the other computer with user name and password?

Jimmyzeng wrote:
Nobody can help on this?
Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How to login the remote desktop with user id and password using coded ui

we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem?
Thanks in advance ...

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Jobs are going to released state after the PC triggers with user event.

Similar Messages

Maybe you are looking for