Jobs for ocp
Could there be a entry level jobs for OCP - Forms developer with no commercial experience in UK preferably london, is there any other way to find out like forum, placement site or any other means ?
user7553741 wrote:
Could there be a entry level jobs for OCP - Forms developer with no commercial experience in UK preferably london, is there any other way to find out like forum, placement site or any other means ?There is always a chance but i suspect it is relatively thin. You should be able to find some job agencies to see what they say .... and ignore the most optimistic .... You may get lucky but in my opinion be prepared to be disappointed.
Similar Messages
-
Purpose of instructor led training requirement for OCP?
What is the purpose of requiring OCP candidates to take an instructor led course? It all seems a bit random / superfluous. Costly too if one does not have an employer willing to pay for the training.
My Oracle Press "OCA/OCP Oracle Database 11g All-in-One Exam Guide" doesn't even hint that classes are a requirement for the OCP; the most said is: "The OCA qualification is based on two examinations; the OCP qualification requires passing a third examination." (pg. XXIX). An incomplete characterization, correct?
And "To prepare for the OCA/OCP examinations, you can attend Oracle University instructor-led training courses, you can study Oracle University online learning material, or you can read this book." (pg. XXIX). Prepare for the exams, sure. But why would such a book omit the not insignificant detail that a perhaps expensive course is required to get the OCP? Seems discourteous to the reader.
From http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=244#5 via http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=198&p_org_id=&lang=
I say it seems random and superfluous because of the following list:
"These foundation courses meet the Hands On Course Requirement for OCP-Level certification:
* Oracle Database 11g: Introduction to SQL
* Oracle Database 11g: Introduction to SQL Ed 1 LVC
* Oracle Database 11g: SQL Fundamentals I
* Oracle Database 11g: SQL Fundamentals l Ed 1 LVC
* Oracle Database 11g: SQL and PL/SQL Fundamentals
* Oracle Database 11g: SQL and PL/SQL Fundamentals Ed 1 LVC
* Oracle Database 11g: Develop PL/SQL Program Units
* Oracle Database 11g: Administration Workshop I
* Oracle Database 11g: Administration Workshop I Ed 1.1 LVC
* Oracle Database 11g: Administration Workshop II
* Oracle Database 11g: Data Warehousing Fundamentals"
A modest Intro to SQL course will count? But an OCA will already have that knowledge. Obviously, one should choose a course with higher-level content. But I'm not sure I understand the logic of the OCA-grade courses being eligible. And for those funding certification without financial assistance from an employer, the question that suggests is this: what is the least expensive way to satisfy the "instructor led" course requirement? I cheapest price I see from Oracle is a 3 day class costing $1,800. It would also cost 3 days of vacation time, or unpaid leave, if an employer is not supportive of certification.Dana N wrote:
Thanks for your thoughtful reply Hans.
TO expose the candidate to techniques related to the new features rather than traditional techniques that are commonplace in the industry.That makes sense to me. But many of us like to tinker with new features on our own.In my experience, many, many more people want the OCP without doing any work. Some will use pure memorization or out and cheating to get there.
It's unfortunate that you and I get penalized by those.
>
And to ensure that the has had at least some hands-on time, instead of only pure theory. While some people may get hands-on at work, many others do not
have that opportunityh, especially in the are of new features.Then it might make sense for OCP certification to allow submission of proof of work experience in place of the HOC, as is the case with other professional certifications.
Yes, that would be nice.
But difficult to verify. and you would be surprised how many organizations have very narrow definitions of the job. Experimenting not allowed in some places.
It all seems a bit random / superfluous. Sad, from an instructors and OCP's point of view, to hear you think of it that way.I don't mean to say there isn't anything new any of us couldn't pick up, say, even from an Intro to SQL course. There's a vastness to most technology topics and we can't master every facet. But the cost/benefit ratio may be terribly low for those who are already Oracle professionals with many years of on the job experience. The reality as well is that some instructors are duds--that's the case anywhere. And for my learning style, I prefer self-guided / on-my-own study.
Costly too if one does not have an employer willing to pay for the training.No doubt.
My Oracle Press "OCA/OCP Oracle Database 11g All-in-One Exam Guide" doesn't even hint that classes are a requirement for the OCP; the most said is: "The
OCA qualification is based on two examinations; the OCP qualification requires passing a third examination." (pg. XXIX). An incomplete characterization, correct?A topic to discuss with the authors, and publisher. We (the user community with whom you are talking) have little to no control over this.Wonder if the authors participate in these forums. I realize you, as a user, have no control over this. But a book blessed by Oracle via Oracle Press, I respectfully submit, can and should do better--by including details about the HOC requirement.
Some do. But much more effetive would be to lodge a formal complaint or inquiry.
"These foundation courses meet the Hands On Course Requirement for OCP-Level certification:
...All of which will ensure you have had time becoming acquainted with SQLPLus, DBControl, and perhaps SQLDeveloper.I already use all 3 tools. Would love to take all the courses listed; but I'm not independently wealthy or otherwise.
So would I. ;-)
As well as logging in (you would be surprised how many OCA candidates do not know how), these all give you an opportunity to issue SQL and PL/SQL
commands. Scary, but seems beside the point. The HOC requirement is one solution to this problem, but it seems like a sub-optimal one. Again, this punishes Oracle professionals already working in the field who'd like to become certified. Why is there no regard for them? One way to correct this, if this is a genuine concern on Oracle's part, is to include a "live" aspect to the exams. Then, if this causes a fail, those who flunk might be interested in taking HOCs to remedy this. In this day and age, I'm certain training could involve interactive SQL*PLUS sessions, etc. Only a failure of imagination and will could prevent I suspect; particularly in a world of virtualization. I'd consider a redesign of exams before I'd require people to pay for classes they may be unable to pay for. It's a bit of an insult to working Oracle professionals who want to add certification.
I agree to some extent. Again, the issue is the consistency in experience. I have met people with 10 years of experience, and others with 10 times 1 year of experience.
A modest Intro to SQL course will count? But an OCA will already have that knowledge. I wish this was consistently true. Then I mispoke. But the HOC still punishes existing Oracle professionals.
I sympathize. I'm an independent, and all exams and certification costs come out of my own (corporate=me) pocket. But life in the professional fast lane is not
cheap. This topic has been the source of some contention for quite some time.
Unfortunately a number of people have been unscrupulous in their method of getting certification - cheating, using gunners, and so on - and I see this as one of
the few ways to combat the issue. If the cheating issue is just left alone, the value of OCP (and any other certification) is effectively lost.The unscrupulous, I'm afraid, will always be with us. This problem is not solved, I'm also afraid, by requiring a costly HOC. It is in my opinion one potential solution of many, and not at all the best one. I wonder how other vendors with certifications handle this. I do know that some industry-generic certifications require proof of X years of work in the field (e.g. GISPs), as well as providing proof of various contributions to the field. This could be gamed as well I suppose. But the honest should not be punished along with the dishonest.Basically I agree with the sentiment. Implementation is the issue.
>
Bottom line: in my view, a few alternate solutions to the HOC are:
1) Allow submission of work credentials to substitute for the HOC
2) Incorporate hands-on aspects to the exam, e.g. a SQL*PLUS simulator.
I'm sure the brilliant minds at Oracle, or a suitable contractor, could easily accomplish #2. And #1 might be a true bar-raiser. It seems highly unlikely to me that, say, requiring an Intro to SQL HOC course raises the bar more than a few millimeters.There have been many discussions around this. Several of us have even considered non-vendor certifications as a route to accomplish this.
It is an imperfect world. But hopefully the steps will correct some of the deficiencies.
I am sure Paul and the rest of the Certification team would be happy to hear more feedback on how to implement practical verifiable real-world experience alternatives to the HOC that do not increase Oracle's costs.
>
Since both are unlikely to happen any time soon, what is the least expensive option for the HOC and where do I find a list of courses and institutions that offer them? In my view, Oracle should provide this information as a courtesy. No reason not to unless there is a revenue motive; and the author of the blog posts you sent me assures us the addition of the HOC is not a revenue enhancement maneuver. I'd be more inclined to believe it if those words were backed-up with helpful actions like the one I've proposed--since such a thing seems not to exist.All courses and course locations are available through http://education.oracle.com (and have been available for years) as well as the price. Oracle's policy does not allow for much price variation for education. The exception is when bulk purchased are negotiated, which is outside what you and I can talk with them about. -
Job for httpd.service failed. See 'systemctl status httpd.service' and
Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one. -
Is there a way to save print job for later?
Is there a way to have print jobs saved for a later date/time? The only solution I can think of is to save the document/web page/file to a folder (e.g., "print later"). However, I'd rather just be able to hit print and in the print dialogue "send" the job to a print queue that I can open later.
For the curious, there are two often reoccuring situations where I want to save a print job for later: 1) I work late at night when my family is asleep and my house is not large enough to avoid disturbing their sleep by printing; and 2) I need to print out a 50+ page work document and I don't want to use my home computer to do it.
I'll appreciate whatever tips, recommendations, thoughts I get.the method mentioned by benwiggy will certainly work. If you want to an option that would give you more options, you could use a PDF Service. You could then put a specific job on hold while still allowing others to use the printer.
You can do this by opening AppleScript Editor (/Applications/Utilities). You can copy and paste the following into an editor window --
on open printJobs
tell application "Finder"
set trapFile to quoted form of POSIX path of (printJobs as string)
end tell
set defaultPrinter to do shell script "lpstat -d | awk -F: '{print $2}'"
do shell script "lpr -P" & defaultPrinter & " -q " & trapFile
end open
Save the file as an Application. You can name it something like Hold Print Job. Then just put it in the PDF Services directory in the Library directory of your Home folder <yourname>/Library/PDF Services. You may need to make the PDF Services directory as it may not already be there.
Once the file is in place, you can use it by using the PDF drop down menu at the bottom left of a print window. That will send the file to the printer and put it on hold. Others can still use the printer. You can then print your file whenever you want. Just open the print queue as mentioned by benwiggy. Highlight the job that is Paused. You will see a little curly icon at the very right (looks like a reload icon in a web browser). Just click that icon and the job will start printing. -
BackGround Job for Transaction VF06
Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha KapoorHi,
I have the seen the Log it tells:
Date Time Message text Message class Message no. Message type
29.06.2008 22:00:48 Job started 00 516 S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH) 00 550 S
29.06.2008 22:00:48 Job finished 00 517 S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor -
Program works but background job for that program fails....
I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1) First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2) Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3) Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAmRobert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = l_xml_size
filename = FILEPATH
filetype = 'BIN'
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 24.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use.. -
Can ABAP proxy to consume WSDL file be run as background job for every10min
Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1) Should I create a web service or should I consume a web service?
2) If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3) Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
num type i,
end of ty_data.
DATA: itab TYPE standard table of ty_Data,
la_data like line of itab,
xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
<table>
<tt:loop ref=".table">
<item>
<tt:value ref="NUM"/>
</item>
</tt:loop>
</table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel -
Error in Schedule Background Job for Deadline Monitoring of swu3
While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
Please advice what could be cause of itthe earlier problem of background job was solved by changing the output device assigned to user wf-batch .
regarding the transport request :
when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have executed it automatically ...
well thanks all for u r help -
Problem in creating Batch job for programs in different servers.
Hi All,
I have a requirement like i have 2 different programs ( PRG1,PRG2 ) running in 3 different SAP servers (SER1,SER2,SER3).
I want to create a batch job for the programs.
Here When I run the PRG1 in Server SER1,it will create a file1 in SER1 as well as the other 2 servers (SER2 and SER3).
It just create a file and there is no content in the file.Once i start writing records to file1in SER1,the same record will be started writing in SER2 and SER3.This is using PRG1.
Once PRG1 will complete writing records in file,Next PRG2 will run in SER2 using file created by PRG1.
I want to create a batch job for PRG1.
How to trigger the PRG2 after completing job1 for PRG1 without any manual interaction.
Please help me for this.Hi Ambili
You can set steps in these jobs in transaction SM36.
You can define that Job 2 starts after Job1 complete sucessfully and same game for other jobs.
Please, check attachment for detailed information about that
Kind regards
Edited by: Carlos Machado on May 27, 2010 6:01 PM -
Hello,
I'm looking for the ABAP program name of creating a job for MD03
Could anyone help with this? Or just tell me how could I create a job for md03?
Thank youDear,
Program SAPMM61X it is for MD01 MRp at plant level.
For Back ground use the RMMRP000
Please refer this link,
Re: MRP background job
Regards,
R.Brahmankar -
Creating a job for a procedure with an input parameter
Hi,
I want to create a job for a procedure ( sp_proc ) with a input parameter.
The input parameter is a date value.
As per the syntax for dbms_job.submit procedure;
dbms_job.submit (
job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'NULL',
no_parse IN BOOLEAN DEFAULT FALSE);
How should the procedure be declared in the 'what' parameter of the dbms_job.submit procedure ?
Please guide.
Thanks.Hi,
You are wright, I have found this thread [DBMS_JOB -- how to pass parameters to the job|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:351033761220].
Regards, -
Creating a Job for publication in Sql Server with select statement for passing a parameter
I am creating a job for adding article to a publication. the second step (e.g. for adding article) gives me error. I pass the name of the table as follow:
EXEC sp_addarticle
@publication = 'TTB', --THE NAME OF MY PUBLICATION
'select top (1)' @article = 'Name from TableAdded Order by create_date Desc',
'select top (1)' @source_object = 'Name from TableAdded Order by create_date Desc',
@force_invalidate_snapshot = 1;
TableAdded is a table I have in my publisher which contains the name of the newly added table.
I believe it fails because the way I pass the name of the article to the store procedure is not correct. Can anyone please help me on that?
Kind regards
AminYes, the way you add article is wrong.
you may try the below and let us know if you have any issues:
while loop begin (Get the values from TableAdded with status IsAdded=0)
Assign the values to variables like @article = Select top 1 Name from TableAdded where IsAdded=0
Call the sp_addarticle assigning the variable
update the Isadded flag in tableAdded for the name to 1
end while
BTB, Article configuration is supposed to be a one time configuration. Having said, you can easily configure through API. Caution, not sure what are you trying here, for adding new article, you may need to synch the data first in the above approach and should
carried out in the downtime. -
Background Processing? how schedule job for "System Error" Message .
Hello everyone,
in sap help i have read.
http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
PCK> Monitoring>Message Monitoring-->Background Processing
you can schedule jobs for various background processing:
● Archiving of messages processed successfully
● Deletion of messages that are not to be archived
● Restarting of messages with errors
● Rescheduling of lost messages
can anyone understand this docu?
give me some introduction, how can i define and schedule these jobs ?
thx in advance!!
best regards
YaningBackground Processing
Prerequisites
You have started the message monitor on the initial screen of the PCK and are in Background Processing.
Features
Archiving
You require two archiving sessions to archive messages:
● One session to write the messages to the archive
● One session to delete the persisted messages that have been archived
To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
Deleting
A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
Thx Aamir.
But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
the situation is like Naveen Pandrangi's WebLog
II. Errors in Adapter Engine [XI : How to Re-Process failed XI Messages Automatically|XI : How to Re-Process failed XI Messages Automatically]
I
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
*how can i schedule a job to automatically restart these messages with errors?
best regards
Yaning
Edited by: Yaning Liu on Aug 18, 2008 1:43 PM -
Schedule a background job for a program using ABAP code.
Hi,
I have to write a program to schedule a background job for another program.
Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
Need it urgently.
Thanks in advance.
Sandeep.Hi Sandeep,
Here is the demo program regarding the BDC For the background job.
report zprprbdc1
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
***data: begin of itab occurs 0 ,
*** matnr(20) type c,
*** mbrsh(30) type c,
*** mtart(30) type c,
*** kzsel(20) type c,
*** maktx(40) type c,
*** meins(5) type c,
*** end of itab.
data: begin of record occurs 0,
* data element: MATNR
matnr_001(018),
* data element: MBRSH
mbrsh_002(001),
* data element: MTART
mtart_003(004),
* data element: XFELD
kzsel_01_004(001),
* data element: MAKTX
maktx_005(040),
* data element: MEINS
meins_006(003),
* data element: MTPOS_MARA
mtpos_mara_007(004),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
**do.
**read dataset dataset into record.
**if sy-subrc <> 0. exit. endif.
call function 'GUI_UPLOAD'
exporting
filename = 'c:\jitu\bdc\10002.txt'
filetype = 'ASC'
has_field_separator = 'x'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = record
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at record .
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-matnr_001.
perform bdc_field using 'RMMG1-MBRSH'
record-mbrsh_002.
perform bdc_field using 'RMMG1-MTART'
record-mtart_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-kzsel_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
record-maktx_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-meins_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-mtpos_mara_007.
perform bdc_transaction using 'MM01'.
**enddo.
endloop.
perform close_group.
*perform close_dataset using dataset.
&*****************Reward point if helpful************& -
Hi All,
Does anyone have an idea how to schedule a job for APDs? There is a program called "RSAN_PROCESS_EXECUTE" and it can be scheduled, but it needs to be run with the specific APD. I will appreciate any help with points,
ThanksI don't know what you mean when you say " ....needs to be run with the specific APD", but you can use the program to execute your APD in process chain by creating a variant, if you want to manually schedule, you can do so as well, rsanbw-> display the APD and schedule Icon on the top menu bar, that will give you scheduling options.
thanks.
Wond
Maybe you are looking for
-
Problem with adobe reader for android.
I have set up 25 android tablets for my employees to use adobe reader. They are downloading a blank .pdf forms created with acrobat from a cloud drive (google drive) and then filling out the forms on the tablet. On 24 of the tablets, when the origina
-
How do you sync sound from a digital recorder with video?
Can anyone tell me how to sync sound with video? Not a voice over but Voice recorded when video was shot. Voice was recorded on hand held digital recorder.
-
hello experts, i am working on BPM scenario, in that i have few block steps..... one of block step, the step name is displaying the error. saying that the step name is already exists. but i have changed, then also it displaying the same error. can an
-
If I buy a used Blackberry, do I need or do they automatically add data plan? I don't want it
I can upgrade, but not really sure if I want to pay an additional $30 for a data plan. I was thinking of buying a used blackberry first, can I use it for txt and calls, or do I need to add a data plan for it to work? I wish I could get the $9.99 plan
-
HOW DO I BACKUP MY MUSIC TO FLASHDRIVE?
HOW DO I BACK UP PLAYLISTS OR ENTIRE I TUNE FILE-5,000 SONGS TO FLASH DRIVE?