Jobs in Pakistan
I have found a site of job, where you can find a lot jobs in all cities of Pakistan. Visit here http://www.jobz.pk/
HI,
Even these links are good:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/content.htm
Regards,
Habeeb
Similar Messages
-
Hiu2026
Can anybody guide me regard scope of SAP in Pakistan. I have few questions; like what are basic requirement (qualification + work) to get a SAP FI/CO job in Pakistan or UAE? What if one do not have SAP certificate but have an experience in SAP FI/CO, what are the chances to get a job in this scenario?
Looking forward to hear from you
Regards,
SohailI personally feel SAP FICO is very good module. I don't know it's chances in Pakistan.But it will be very handy.
-
OCA 11g Exam Registration Problem in Pakistan
Hello,
I'm undergraduate student and an employee in Pakistan and I've studied Oracle 11g and want to take admin-I exam 1Z0-052, but in here, Pakistan Pearson VUE authorized testing center is not registering for admin-I exam. They insist me to take trainings as said that without training they are not going for exam registeration.
However their is no completion from oracle to either take training for 1Z0-052 exam. I'm not alone facing this problem but other colleges are facing as well and they went to other city for exam where they easily registered.
I can't go to another city for exam taking due to some Job and family reasons. However I want to launch complaint against them so that they cant tease people for these matters. Can any body tell me the way I can launch complaint against the Institute to either Oracle or to Pearson VUE. The authorized institute for conducting exam is located in Rawalpindi, in the area where Pearson should not open its exam center.
Kindly help me in this matter so that I can continue ny education and can make my career.
Looking for reply
QuickLearneruser13021221 wrote:
Hello,
I'm undergraduate student and an employee in Pakistan and I've studied Oracle 11g and want to take admin-I exam 1Z0-052, but in here, Pakistan Pearson VUE authorized testing center is not registering for admin-I exam. They insist me to take trainings as said that without training they are not going for exam registeration.
However their is no completion from oracle to either take training for 1Z0-052 exam. I'm not alone facing this problem but other colleges are facing as well and they went to other city for exam where they easily registered.
I can't go to another city for exam taking due to some Job and family reasons. However I want to launch complaint against them so that they cant tease people for these matters. Can any body tell me the way I can launch complaint against the Institute to either Oracle or to Pearson VUE. The authorized institute for conducting exam is located in Rawalpindi, in the area where Pearson should not open its exam center.
Kindly help me in this matter so that I can continue ny education and can make my career.
Looking for reply
QuickLearnerHi:
There is no certification related requirement for you to take training before sitting an exam. (Some training may be required for some certifications, bu not in the context and manner you are being co-erced towards).
It seems unethical in general for a general purpose testing centre to insist you take training there ... however I suppose it might be possilble that a center will be traing orientated and only offer testing to students who train there, that being there business model. It is also possible that the person you spoke to there is corrupt.
1) Use http://www.pearsonvue.com/Oracle/locate/ to locate alternative test center if possible.
2) I believe you are able to shedule your exam online (It is just possible Pakistan is different) http://www.pearsonvue.com/Oracle
3) Please Report the case to Pearson VUE at http://www.pearsonvue.com/oracle/contact/ as there is risk of corruption at that Test Center. -
Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstanceHi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan -
Report program when run in background job getting cancelled immediately
Hi
When i run a program in foreground i am able to see the output. But when run in background not able to run the job successfully. The job is getting cancelled immediately.
I am using the below function module for output display. Should i need to pass any parameters in the below function module so that i can run the program in background successfully.
CALL METHOD DETAIL_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = IS_LAYOUT
I_SAVE = 'A'
IS_VARIANT = GS_VARIANT
CHANGING
IT_FIELDCATALOG = IT_FIELDCATALOG
IT_OUTTAB = BLOCKED_STOCK_TAB_ALV[].
Please suggest.
Thanks and regards
Rajani YeluriHi Rajani.
ALV require the DRYPOR(screen) for display but incase you run in back ground which have to write to spool but in spool we can only write in format of LIST REPORT not inter-active report like ALV. That why
system cancelled your process immediately.
Hope it helps.
Sayan. -
Report Job was cancelled upon user request???
Hi,
My reports take more than 10 minutes to complete, most times I get
"Report Job was cancelled upon user request".
error, how to fix this problem? Is there any time limit inside the report I can set.
Thankshi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj -
Hi ,
I have a requirement in which I have to create a report that should pickup all the cancelled CRM marketing jobs (due to whatever reason) based on on job name, copy them and restart them.
In your selection screen, you will give the cancelled job name (wildcard acceptable..like ZE00*) and a radio button to show the cancelled job list and copy the jobs.
Could anyone guide me on how to go ahead with this report?
Regards,
MohitHi,
in table TBTCO and TBTCP you have all jobs with current status. You can search them by name.
Selected jobs you can "popup_with_table" FM. Then you need to use fm to submit job in ackground;
'JOB_OPEN', 'JOB_SUBMIT' and 'JOB_CLOSE'.
Good luck ! -
I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?
What file format did you export it to?
-
How To Handle With Back Ground JOB From WEBUI When Click On "Appove"
Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
RajHi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
REFRESH lt_buttons.
lss_button-id = 'btnyes'.
lss_button-text = 'YES'.
lss_button-on_click = 'YES'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
lss_button-id = 'btnno'.
lss_button-text = 'NO'.
lss_button-on_click = 'NO'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
CALL METHOD comp_controller->window_manager->create_popup_2_confirm
EXPORTING
iv_title = 'ATTENTION'
iv_text = 'Are you sure you want to edit this document?'
iv_btncombination = '99'
iv_custombuttons = lt_buttons
RECEIVING
rv_result = req_edit.
req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
req_edit->open( ).
RETURN.
ELSE.
lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
* lv_outbound = req_edit->get_fired_outbound_plug( ).
IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
ELSE. " No
if user clicks no nothing to do..
ENDIF.
CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi. -
Schedule jobs witj job open, submit and close
Hi gurus,
I need to know if there is any way to schedule various jobs using the FM job_open job_submit and job_close. Like schedule the first job for a date and a hour and schedule others jobs to run after the first job sequential.
Its this possible?
Thk in advanceHi
see the sample code for the Job scheduling using the fun modules
IF p_bjob = 'X'.
CONCATENATE sy-cprog sy-datum sy-uzeit
INTO jobname SEPARATED BY '_'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING
out_archive_parameters = arc_params
out_parameters = print_params
valid = valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF valid = chk.
SUBMIT yREP WITH s_kunnr IN s_cust
AND RETURN
USER sy-uname
VIA JOB jobname
NUMBER jobcount
TO SAP-SPOOL
SPOOL PARAMETERS print_params
ARCHIVE PARAMETERS arc_params
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
invalid_target = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE i029 WITH jobname.
ENDIF.
ELSE.
MESSAGE s000 WITH text-003.
STOP.
ENDIF.
ENDIF.
Regards
anji -
Problems creating background job for program (job open, submit and close)
Hi gurus,
im trying to start a background job using the FM BP_START_DATE_EDITOR to show the start date to the job or if it's imediate. this FM it's working fine, after call it im opening a job, submiting it and call the job close FM and the job close FM creates me the job.
The problem it's when i go to the sm37 to see the job status the job has been canceled, and the job log says that i have to give a start date to the job.
What i dont understand it's either the job is imediate or i choose a date to start the job always gives me this error...
Below goes my code,
any ideas will be rewarded
CLEAR: stdt_modify_type, stdt_output.
CALL FUNCTION 'BP_START_DATE_EDITOR'
EXPORTING
stdt_dialog = 'Y'
stdt_input = stdt_input
stdt_opcode = 14
IMPORTING
stdt_modify_type = stdt_modify_type
stdt_output = stdt_output
EXCEPTIONS
fcal_id_not_defined = 1
incomplete_last_startdate = 2
incomplete_startdate = 3
invalid_dialog_type = 4
invalid_eventid = 5
invalid_opcode = 6
invalid_opmode_name = 7
invalid_periodbehaviour = 8
invalid_predecessor_jobname = 9
last_startdate_in_the_past = 10
no_period_data_given = 11
no_startdate_given = 12
period_and_predjob_no_way = 13
period_too_small_for_limit = 14
predecessor_jobname_not_unique = 15
startdate_interval_too_large = 16
startdate_in_the_past = 17
startdate_is_a_holiday = 18
startdate_out_of_fcal_range = 19
stdt_before_holiday_in_past = 20
unknown_fcal_error_occured = 21
no_workday_nr_given = 22
invalid_workday_countdir = 23
invalid_workday_nr = 24
notbefore_stdt_missing = 25
workday_starttime_missing = 26
no_eventid_given = 27
OTHERS = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
MOVE 'X' TO gv_flag.
ENDIF.
DATA jobname LIKE tbtcjob-jobname.
DATA jobcount LIKE tbtcjob-jobcount.
DATA job_release LIKE btch0000-char1.
DATA job_imediate TYPE c.
CLEAR: jobname, jobcount, job_release.
CONCATENATE 'MAPAEXEC' sy-uname sy-datum
INTO jobname SEPARATED BY space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ENDIF.
SUBMIT z_mapa_execucao_orcamental
VIA JOB jobname NUMBER jobcount
WITH ano EQ ano
WITH so_perio IN so_perio
WITH so_date IN so_date
WITH so_org EQ so_org
WITH so_num IN so_num
AND RETURN.
IF stdt_output-startdttyp EQ 'I'.
CLEAR job_imediate.
job_imediate = 'X'.
ENDIF.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
calendar_id = stdt_output-calendarid
event_id = stdt_output-eventid
event_param = stdt_output-eventparm
event_periodic = stdt_output-periodic "?
jobcount = jobcount
jobname = jobname
laststrtdt = stdt_output-laststrtdt
laststrttm = stdt_output-laststrttm
prddays = stdt_output-prddays "??
prdhours = stdt_output-prdhours "?
prdmins = stdt_output-prdmins "??
prdmonths = stdt_output-prdmonths
prdweeks = stdt_output-prdweeks "?
predjob_checkstat = stdt_output-checkstat
pred_jobcount = stdt_output-predjobcnt
pred_jobname = stdt_output-predjob
sdlstrtdt = stdt_output-sdlstrtdt
sdlstrttm = stdt_output-sdlstrttm
strtimmed = job_imediate
targetsystem = stdt_output-instname
start_on_workday_not_before = stdt_output-notbefore
start_on_workday_nr = stdt_output-wdayno
workday_count_direction = stdt_output-wdaycdir
IMPORTING
job_was_released = job_release
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE i003(zmapas).
EXIT.
ELSE.
MESSAGE i004(zmapas) WITH jobname.
ENDIF.
Thanks in advance,
Best Regards
João MartinsHello João.
In debug mode, check the value of variables you passed to parameters sdlstrtdt and sdlstrttm.
As aditional info, I usually achieve your goal without FM BP_START_DATE_EDITOR.
Check this code:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = w_jobname
IMPORTING
jobcount = w_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CLEAR seltab_wa.
MOVE: t_jobs-param TO seltab_wa-selname,
t_processar-line+34 TO seltab_wa-low.
APPEND seltab_wa TO seltab.
seltab_wa-selname = 'P_LOJA'.
seltab_wa-low = t_processar-ficheiro+7(4).
APPEND seltab_wa TO seltab.
*** Submete o programa para o JOB
SUBMIT (t_jobs-repid)
WITH SELECTION-TABLE seltab
USER sy-uname
VIA JOB w_jobname NUMBER w_jobcount
AND RETURN.
*** Encerra o JOB
l_hora = sy-uzeit.
ADD 60 TO l_hora.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = w_jobcount
jobname = w_jobname
sdlstrtdt = sy-datum
sdlstrttm = l_hora
targetserver = w_servidor
IMPORTING
job_was_released = l_liberado
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Regards.
Valter Oliveira. -
Jobs with a startevent and starttime
hello,
I'd like to plan a job in an abap program which is started when an event is raised or a certain timespan
has passed.
When planing the job by using the functionmodules job_open, job_submit and and job_close I can supply an event and a startdate but the implementation of the functionmodules ignores the event when the startdate parameter is supplied.
Is there a workaround to enable event triggered jobs with a startdate which is used if the event is not raised within a certain timespan or do I really hav to use 2 jobs?
thanks
RomanHello Roman
I think you have to use 2 jobs, but if you use 2 jobs with the same program the program may run twice.
You could create 1 job with your program that is started by event and 1 job with a startdate/time that runs a program that raise the event.
best regards
Thomas Madsen Nielsen -
Hi I am working on batch job .
my program is printing invoice as well as downloading and I have run this program in batch,
I am using the FM job_open , job_submit and job_close.
but it is failing in job_submit with sy-subrc eq 1 .
giving me error bad print parameter , I haven;t done this before.
I think it should be option.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = SY-UNAME "tbtcjob-authcknam
jobcount = tbtcjob-jobcount
jobname = p_jobnam
language = sy-langu
report = c_reprot
variant = pvariant
EXCEPTIONS
OTHERS = 01.
could anybody pls guide me why it is so???
Regards.
Kusum.you can below code
OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
WITH SMART LINEFEED.
IF sy-subrc EQ 0.
WHILE sy-subrc IS INITIAL.
READ DATASET gv_file INTO gwa_header_file.
IF sy-subrc NE 0.
EXIT.
ELSE.
APPEND gwa_header_file TO gt_header_file.
ENDIF.
ENDWHILE.
CLOSE DATASET gv_file.
ENDIF.
ENDIF. -
Hi Experts,
I have a critical requirement. I need to kick off 3 interfaces from 1 report each of which will update the Oracle database.
I've used JOB_OPEN and JOB_CLOSE function modules and using SUBMIT <report> VIA JOB <jobname> NUMBER<jobnumber> AND RETURN. My problem is that these 3 reports are not getting executed, means they are not updating the Oracle database when they are kicked-off from the new program.
But if i run each of them individually with same test data, it runs perfectly and updates the Oracle database. I tried to debug, it returns before going into START-OF-SELECTION event.
Any help will be appreciated
Thanks
PrateekThe VIA JOB addition also loads the program accessed in a separate internal mode when the SUBMIT statement is executed and the system performs all the steps specified before START-OF-SELECTION. This means the events LOAD-OF-PROGRAM and INITIALIZATION are triggered and selection screen processing is performed. If the selection screen is not processed in the background when VIA SELECTION-SCREEN is specified, the user of the calling program can eidit it and schedule the program accessed in the background request using the function Place in Job. If the user cancels selection screen processing, the program is not scheduled in the background job. In both cases, execution of the program executed is completed after selection screen processing and the system returns to the calling program due to the AND RETURN addition.
Hope you got it. -
Hi,
We can schedule the programs or transactions in background through SM36 and we can see the status through SM37.Then what is the use of FM's JOb_open,Job_submit and Job_close.When we will use these FM's.
Can anybody tell me the difference between these two methods for scheduling the jobs in background....with sample code if possible
Thanks & Regards,
Rakesh.hi,
chk this,
call funcatio.
****Open a job to submit the Post Program into
call function 'JOB_OPEN'
exporting
jobname = jobname
importing
jobcount = jobcount
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc 0.
raise job_open_failed.
endif.
submit zefu_currency_load_callbak_ack
via job jobname
number jobcount
with com_num = com_num
with relay_nu = relay_num
and return.
if sy-subrc 0.
raise job_step_failed.
endif.
****Close the Job and start it immediately
call function 'JOB_CLOSE'
exporting
jobcount = jobcount
jobname = jobname
strtimmed = 'X'
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
if sy-subrc 0.
raise job_close_failed.
endif.
Also,
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
You can also use the fun modules JOB_OPEN,JOB_CLOSE etc for job
scheduling.
hope this helps.
regs,
hema.
Maybe you are looking for
-
OBIEE 11g OPMNCTL not starting
Hi All, When I'm trying to start my OBIEE services, all the services are starting, but the OPMNCTL status is not starting. When I'm trying to start it manually, It is giving me the below error message. Cannot resolve My-PC for instance any opmnctl St
-
Uploading photo's problem.
Ive been trying for a while to upload photos to various web site including facebook.I click on to i photo i get to the start of the i photo library but then get the spinning beach ball.I cant do anything else from then on and my only option is to shu
-
Compiling problem or xp being poo
i recently reinstalled xp due to my primary hd dying and then the sdk, since the reinstallation i keep getting the cannot resolve symbol error as if the other classes arent found, is it the luvable compiler or xp being poo?
-
Hi, I want to know how DBWn works SAy; There is a tablespace DATASR3. This tablespace consists of 10 Datafiles. 6 Datafiles are already filled. (Reached to its MAXLIMIT.) and Other 4 datafiles is in the preocess of getting the data. Im interesting in
-
I downloaded PS cc 2014, LR cc 2015 and LR 5. LR cc 2015 will not open. I have tried signing out and in and reloading. No succes. I use Mac mini (late 2012) + Yosemite 10.10.3 Juhana Ikonen