Jobs Stopped - all the time, whatever printer...

OK, I've got an Imac Intel Core 2 Duo with Version 10.4.9 - and it works great...except for printing. No matter what the printer (and I just bought a new one, thinking the drivers were the issues) the job seems to start and then goes immediately to Stopped...
Have restored drivers on my HPs, repaired hard drive, even bought a new Epson Aculaser CX11N - and still the same problem.
HELP!!!

Here is apple's instructions for Re-installing.
It will keep all of your info but put new system files on the Mac. You will then have to update the software to the current version. Just use the appropriate combo updater from here.
1.8 SP G5/iMac G4 FP/MBP 2.33/PB G3 Pismo Mac OS X (10.4.9) XLR8 G4 Upgrade for Pismo

Similar Messages

How do I watch videos without them stopping all the time?

How do I watch videos without them stopping all the time?
I have Snow Leopard on two computers and IOS5 on IPad 2. Videos will not run without stopping. I am talking about videos like on Yahoo and YouTube etc.

Slow Internet download speeds are typically responsbile, if you have 5 Mb/s or slower it's really bad. 10 Mb/s or higher is preferred and 20 Mb/s or better is ideal.
If you use a alternate DNS service like GoolgeDND or OpenDNS which has to fetch Akami hosted content from overseas instead of using your much closer ISP servers.
If your router is the old G model, upgrade to N.
If your wifi is open, you could have leechers. The more on the network, even a fast one, the slower it gets.
Secure your network info here etc.,
https://discussions.apple.com/message/16276201#16276201

How do i stop all the apps from printing on my officejet 7500a wide format?

I want to stop all the apps, like free samples, from printing! They have used up too much of my paper and ink!!!

Hi,
Please use the following link (under "Manage Print Apps" to cancel/remove it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
You may also get this:
My Print Apps
To view and manage print apps for your printer, use the display on the printer itself. This website cannot manage print apps for your printer. In this case, you have to cancel from your printer.
Please also try this (if needed):
http://h10025.www1.hp.com/ewfrf/wc/clc?tmp_showAll=false&destPage=document&cc=us&dlc=en&docname=c031...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

TS1398 Just got the mini, specifically to get jobs on a certain website. Jobs change all the time. When I go to website, it has not updated from the first time I logged in on the mini. It works on my laptop just fine. HELP!

My sons just bought me an ipad mini especially so that I could check a certain website on which I sign up for jobs throughout the day. The website is updated constantly throughout the day with new jobs and the status of the jobs I already have accepted and worked on. (It shows the percentage of the job that has been done.) It worked fine only the first time I logged on with the mini. Since then (yesterday,) when I check the website, it lets me log in, but I only see the same exact information that was there the first time I went to the website using the mini. It seems to be 'frozen' on that particular first look. It doesn't update at all.
I know it is not updating because I have also been checking with my notebook computer and with the notebook, the website is up to date.
Maybe its Safari?
I had the same problem when I used a friend's iPad.
I wonder if there is a setting or something that I could change to allow the website to update to the time I check it.
If not, then the ipad mini is a terrible disappointment and I would like to return it.
If you can help me, I would be extremely grateful.
Thanks in advance...

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Contacts app stops all the time i open it.

Every time i try to connect to my Xperia Z2 Contacts app or Phone, it automatically bugs it and i have 2 errors messages, depending on the time :
- the Contacts application has unfortunatly stopped
or
- the com.andriod.phone processing has unfortunatly stopped
And when i finally manage to call someone, it cuts the call within the next 60sec....
Any guess how to stop that happening ? Where the pb is coming from ? It is really becoming an hassle not to be able to telephone on a telephone.
Thank you all,
Jet K
Solved!
Go to Solution.

JetKraze wrote:
Hi Hussain,
Thanks for the reply
What do you mean by clear data ? Reinitiate the phone = erase everything ?
If I do so, how can i keep all my data and reinstal them later one ?
Thanks
No. I mean if you go into settings, then Apps, then go in the All tab then look for Contacts, click on it, then scroll down and click the clear data.
Do the same for Phone.
Before you do this try backing up your contacts. But you have to do this through the Contacts app itself so I think it's going to be hard.
If you can access contacts, then go into it, click the three dots at the bottom and select 'Export Conatacts'.
Hope this helps.

WHY DO THE VIDEOS I AM TRYING TO VIEW (YOU TUBE ETC) START AND STOP ALL THE TIME.. I HATE THAT!!!

Why do the videos that I am trying to view (you tube etc) always start and stop. it is very annoying and I can't seem to fix it.... thanks for your pointers... as you can see, I am not a techie. the fact that numbers, letters and picture appear on my computer screen is

Make sure you are using the latest version of Adobe Flash Player.
A suggestion:
Go to YouTube, open any video and press pause (don't do this while video is playing).
Click the ctrl key or “right click” the mouse in the middle of the video window. The settings for flash player will pop up.
Select the video settings then select "enable hardware acceleration."
Press close.
Now RESTART YOUR COMPUTER not just Safari if that is your browser of choice.

HT4623 I tried watching YouTube videos stopping all the time and starting up even bought abode flash app just bought this iPad used is it junk

I cant get videos to just play without stooping and starting on YouTube.Should I update ISO?

I have noted in several posts as have a few of the others here,, Bob Timmons being one who has tested it, that the new one was no better than the old ones. I bought a new AEBS 5th Gen to test against all my old TC's up to Gen 3.. IMHO they are all about the same.. and my old Thomson G wireless router beats them handsomely at the other end of the house. ie the range is to be frank, pathetic. I don't have a Mac laptop to test with.. so just concluded it needs the exact match to get results like anandtech article..
I would do the following.
1. Download and use 5.6 utility.. you are lucky you are still on Lion as ML no longer can use v5 utility.
http://support.apple.com/kb/DL1482
2. Set wireless names to short, no spaces, pure alphanumeric. Set a different name to 5ghz. Its range is always short.. so don't expect too much. Make sure the output is set to 100%.. and the region is correct.
3. Lock the wireless channel for 2.4ghz.. test the available channels.. in Nepal I have no idea what is allowed.. but 1, 6, 11 are the main non-overlapping channels for most of the world. Power output maybe different though and the TP-Link might be set to higher output country.. apple do not allow that. Check what country the tp-link is set to.
4. The location of the TC must be as good as possible.. The antennas are around the 3 sides but the most important is in front.. try to place the TC so the laptop is facing the front of the TC, with nothing in between.
I am pretty sure you are never going to get the output any higher than it is now.. I still use the old wireless G Thomson signal in the other end of the house. And even running 3 TC at once (when I am repairing power supplies.. makes no difference.. they are all invisible).
Either return the TC as unsuitable.. or simply use it as a backup.
The TP-Link can be used in wan bypass to provide wireless.. just turn off the TC wireless.

Installed TB on my new PC but it's soooo slow and stops all the time.

I just bought a new computer and installed TB on it. For some reason, it very, very slow - if it responds at all. What's ahappened and (more important) how do I fix it?

Most likely McAfee is the problem.
https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

OWB CCASTART stops all the time

Hi,
I am encountering an issue regarding the ccastart agent.
Even though I start it in background (environment Linux) with putty, after a while it stops.
Could someone tell how to keep it alive?
Thanks and cheers.

Anything in the log or console that gives any indication of what is going on?
Cheers
David

HT3597 how do you deactivate voice control so when the phone is in your pocket, you can play music without it stopping all the time??

how do you play songs uninterupted when the phone is in your pocket?

Tap Settings, tap General, tap Passcode Lock, tap Turn Passcode On. When that is enabled, below there is an option to toggle Voice Dial on or off (note: Music Voice Control is always enabled). Unfortunately, if you do not want Passcode Lock on, you cannot disable this feature.
Source: http://ipod.about.com/od/phonefeatures/ss/Using-Iphone-Voice-Control.htm

Firefox does't open. Task manager tells that F. opens 21676 kB, but then it stops all the times. What is wrong?

I just loaded a new Firefox. It doesn't open.

Hi pirkkob,
You might want to take a look at the [[Firefox is already running but is not responding]] Knowledge Base article. Another one that might be helpful is the article on [https://support.mozilla.org/en-US/kb/Firefox-not-start issues starting Firefox]. There is a lot of good information in there.
Hopefully this helps!

Radio Stops all the Time - Buffering again and again and again

Any help as to why when Im listening to Radio it keeps stopping - then after a few minutes it will start again - or if get off radio and then back on I can get it to work again , but I have to do this over and over and it's quite a pain.
Thanks

No replies - just taking question off.

My Canon i560x printer stops in the middle of print jobs

My Canon i560x printer stops in the middle of print jobs when printing via Airport Extreme. Single-page jobs are fine, but the printer sort of runs out of steam on when printing multiple pages. It simply stalls with a flashing warning light, and if I press the resume button it spits the sheet out. The job remains in the queue until I delete it.
This only happens when printing via the base station. If I connect the printer directly, it happily churns away, printing as many pages as I like.
Is there anything I can do to fix this problem?

For the record, though, I did actually do the search, ...
OK, I let you off
And it's not a Canon- or Tiger-specific
problem, as I've also had similar problems with
different versions of OS X, including Jaguar and
Panther, and also with some HP printers.
Now that is strange indeed. My Canon Pixma 5200 stopped working correctly the minute I upgraded to Tiger. Now I got the 5200R and it works beautifully.
You've probably done all this already, still a few random thoughts:
- Got the current Printer driver ?
- Use Airport Express firmware 5.5.1 (*do not* use 5.6 or 5.7!)
- Make a hard reset of the Airport base
- Disable the Mac firewall (and set up the printer again)
- Try all this with another (temporally) user account
- Repair permission + restart before and after installing drivers
Good Luck and let us know if (and how) you solved the problem.
Chris

How do you stop the 11.0.44 version from freezing up all the time?

How do you stop the Itune version 11.0.44 from freezing up all the time. I have two different lap tops with the same version and both do the same thing. The store gives me the most problem.

Hello rkalanz1,
The following article should be helpful in stabilizing iTunes on your laptops.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

I keep having request for ITunes to log in, that is not my account name. I have never used that account. It pops up all the time,and it stops everything that I am working on. How can I get rid of that prompt?

I am having trouble with an ITunes I'd request to log in that is not my ITunes ID. E request pops up all the time. It stops the app or net site every time. Like I said it is not my ID. How can I stop or delete this ID?

Go to Settings>Store>Apple ID. What ID is in the settings. Tap on that ID to change it. Sign Out. Sign in with your own ID. After you sign out with the incorrect ID, restart the iPad before you sign into your correct account.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go to Settings>Store and sign in.

Jobs Stopped - all the time, whatever printer...

Similar Messages

Maybe you are looking for