Joikuspot lite on E72 - nothing can connect to it
Hi
just installed this on my E72 and seems to go well - except that nothing can connect to it and then connect to the internet
I have tried 2 laptops and my PC (win XP) and all see the adhoc network, each can connect to it, but none can access the internet
browsers say site not found
email says smtp server not found
anyone have any thoughts or solutions to this?
Hi pellicle,
Have you tried to delete and reinstall the application? That should do the trick.
Let me know how you get on.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.
Similar Messages
-
What web player can I get on my ipad 2 so I can watch live sports? And how comes since I updated to ios6 I cannot acces the iTunes can connect to App Store but can't get nothing at all from there? PLEASE HeLP
Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
IPhone hotspot is enabled, but nothing can see/connect
I've got an iPhone 5 running iOS 6.1.4, and I have the personal hotspot enabled on my account. I've got the ability to enable the hotspot, and the screen shows that the device is "Now Discoverable". However, if I'm trying to connect via WiFi, almost nothing can connect! Of course, if there is another iProduct that can connect to WiFi, that seems to work more reliably (hmm...). I'm trying to connect with a laptop running Windows XP, the network is not in the list of available networks, and if I manually add the network and set the password for the network and force a connection attempt, nothing happens.
Why is this?! Bluetooth connections seem to work more reliably as well...
Thanks,
-MaxHi mmuelle4,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Best Regards,
Jeremy -
iphone 4s will not turn on, you can not restore with itunes. What to do? Phone lit white screen and nothing can be done?
Reboot computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, all iPhone 4S have full Warranty. Make Genius reservation and take to Apple for resolution.
-
During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!
The update didn't apply correctly.
Did you follow the steps exactly in order to restore? disconnect all cables, open iTunes, then connect micro usb
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Make sure to connect directly to computer, not a keyboard port or USB hub. Try a different cable. -
I can connect my Iphone 6 and Ipad Air to my Bose Soundlink but not my IMac. I have tried all the usual solutions but nothing works. It has worked recently but not in the last week. Help
make sure it's not being connected to by any of the other two
one can only connect 1 device at the time and just by waking up sometimes a headset connects to a device
automaticly
then forget the bluetooth device in OS X and put the headset in pairing mode / discovery mode and connect with it once again with the mac -
NOTHING APPLE CAN CONNECT!
it seems as though nothing 'apple' on my computer can connect with anything apple.
Firefox works but...
Safari is useless, itunes wont connect to the store radio or podcasts, quicktime content guide tells me to connect to the internet, iphoto wont update or let me order prints, nothing is working.
Still, i am on the internet .. firefox works fine.
help?Almost as aggravating as someone yelling!
Apple Net APPs & Firefox have 2 big differences for clues to your problem.
Did you install any 3rd party Net Apps lately?
1st, check your Network Control Panel>Configure:>Proxies Tab, then uncheck any set Proxies.
2nd, try putting these in Network>TCP/IP>DNS Servers:
208.67.222.222
208.67.220.220 -
Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help
My paper work for my linksys says WEP 64 bits. I've tried changing my IPOD to that and it will say put in password and when I do I get "invalid password" or can not connect. This has been in the last few weeks. I have researched this for the last 2 weeks, called apple and they said it's not my IPOD, called Linksys and they want to charge $30 to fix it. How do I change my router without totaly not messing it up?
-
IMovie and Sony camera can connect, but nothing imports
My iMovie and Sony HD camera can connect fine...I can control my camera from imovie, but when i click import, it plays (plays on camera and timer on imovie starts) but the screen remains blue and no video is actually imported.
Did you try Sue's excellent suggestion of the Garage band trick anyway?
Also, try deleting iMovie's preference file...the plist found in YourUserName->Library->preferences->com.apple.iMovieplist. Close iMovie, trash the plist. iMovie will create another one when you launch iMovie again.
Do you have the camcorder plugged directly into your computer's Firewire port? Some camcorders don't work properly if they are connected into another device. And, just to be sure, you do have the camcorder set to VTR, right? -
Hey everyone, I've been experiencing this problem for a very long time, my Macbook Pro has a lot of trouble connecting to my Belkin N1 wireless, however, when I sit far away from the router I seem to be able to connect and use the internet, though I have a lot of 'System Timeout' and have to reboot my wireless. After we moved houses, my room is extremely near the wireless, and before the Belkin was formatted with a password, I was able to use the internet without a problem. However, now I can connect to the wireless, and Network Diagnostics tells me that everything is good to go, however, I just can't seem to use the internet. No pages will load, I've tried everything changing proxies, looking through my security certificates and tried using IP addresses instea of website names and nothing seems to work.
I've gone to the store and have always been dismissed, with the excuse that Belkin is just not compatible my Macbook. I'm not technologically savvy, but I can follow instructions.
Thank you in advance!Hello blinchikis. Welcome to the Apple Discussions!
Which Belkin model do you have? Are you running wireless encyption, WEP or WPA? If so, if you temporarily disable encryption, can you connect your iBook to the Internet now? How about if you connect your iBook, directly using an Ethernet cable? -
How many people can connect to the mail server 3
I am looking to grow my business which consist of a growing email base with emails that need to be set up and managed. How many emails can be hosted on the mac server?
Hello Thomas,
"MAXLOGMEMBERS" has nothing to do with the number of users that can connect to the instance. It is a parameter to control the number of files that can be assigned to a group of (redo) log files.
how many people can connect at Oracle XE?Well, that depends on how they connect. There are parameters controlling the number of sessions in the database. But if you have a technical user, e.g. when using APEX, there may be more users than sessions in the database...
So you need to clarify what kind of user access you mean.
-Udo
Edited by: Udo on 14.10.2011 15:19 -
Is it possible to recover my data from iCloud backup without working wifi? I have as many other upgraded my iPhone 4S to iOS 7.0.2 with the result that the Wi-Fi or Bluetooth no longer works. However, i can connect to iTunes via cable but there is wrong version of backup.
Answer is no.
If you want the iCloud backup you have to have n internet connection, thus WiFi.
The not working WiFi has happened with quite a number of users.
It is not exactly clear what is the cause but there are suggestions to clear it up:
Some people have had success by removing an apostrophe from the iPhone name. If your iPhone is called something like “John’s iPhone” then this might work. Go to Settings > General > About > Name and change it to something with no apostrophe.
Some people have reported success by putting the iPhone into Airplane mode and then going to Settings > General > Reset > Reset Network Settings, but the problem may return.
You could also try going to Settings > Control Center and disable Access on Lock Screen then turn your iPhone off and on again.
Make sure that your router firmware is up to date.
Try backing up your iPhone and then restoring it. Check how to factory reset an iPhone for details.
If nothing is working for you, try contacting Apple or take your iPhone into an Apple Store.
Succes, Lex -
Lion Server VPN, Can Connect Locally, Not Remotely
I have both Lion and Lion Server installed on my Core 2 Duo iMac, mainly because I want the VPN feature of Server.
I configured everything correctly for the VPN, and can connect to it with no problems from my iPhone and iPad when I am within my own LAN (the server and the iPhone/iPad are on the same IP range and subnet).
I also used the automatic config within the Server app to configure my AirPort Extreme N Base Station. Looking at the Port Mapping section of my ABS from within AirPort Utility, I do in fact see that VPN Service (L2TP) is configured with the following UDP ports: 500, 1701 and 4500. Those ports ARE pointing to the iMac that is running the VPN server. Firewall on that iMac is turned OFF.
However, I am unable to connect my iPhone to the VPN Server using my Public IP address. I have tried it from within my network (out of network to internet the back), from my Verizon MiFi or from my iPhone's 3G connection (well, in my area it is still Edge). The iPhone simply sits on "Connecting" for a few seconds, then an alert comes up stating "The L2TP-VPN server did not respond. Try reconnecting. If the problem..." yadada.
I AM, however, able to get Web Sharing to work via my Public IP address, as well as VNC.
I also cannot connect to the VPN via the Public IP with other devices like my iBook, PowerBook G4, Windows 7 PC, or iMac G5. They ALL CAN connect via the local network 10.1.x.x IP address.
Am I missing something here? I did all of the automatic configurations, and all of the ports appear to be properly open.Not in my case, Per, no.
I just did a tcpdump between various systems.
For those that do NOT work (client iPhone, client 10.7 and server 10.7) the tcpdumps look like so:
19:12:33.883057 IP Home.60845 > LionServer.500: isakmp: phase 1 I ident
19:12:33.884410 IP LionServer.500 > Home.60845: isakmp: phase 1 R ident
19:12:33.910379 IP Home.60845 > LionServer.500: isakmp: phase 1 I ident
19:12:33.918362 IP LionServer.500 > Home.60845: isakmp: phase 1 R ident
19:12:33.958995 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 1 I ident[E]
19:12:33.959349 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 1 R ident[E]
19:12:33.959461 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 2/others R inf[E]
19:12:34.997414 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
19:12:34.998323 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 2/others R oakley-quick[E]
19:12:35.016983 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
19:12:35.019173 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x1), length 132
19:12:35.052641 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:35.595022 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x2), length 132
19:12:37.597957 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x3), length 132
19:12:38.212127 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:41.214447 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:41.603061 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x4), length 132
19:12:44.216935 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:45.609900 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x5), length 132
19:12:49.616860 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x6), length 132
19:12:53.623054 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x7), length 132
19:12:54.965357 IP Home.60846 > LionServer.4500: isakmp-nat-keep-alive
19:12:55.032098 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I inf[E]
19:12:55.036420 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I inf[E]
19:12:56.228356 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
Note: I've done this over wired and wireless as well as 3G -- the transport on the client end is NOT the issue.
A connection that works, from iPhone ONLY (on 3G or Wireless) is:
11:24:59.960105 IP Home.61168 > LeopardServer.500: isakmp: phase 1 I ident
11:24:59.964119 IP LeopardServer.500 > Home.61168: isakmp: phase 1 R ident
11:25:00.673976 IP Home.61168 > LeopardServer.500: isakmp: phase 1 I ident
11:25:00.712858 IP LeopardServer.500 > Home.61168: isakmp: phase 1 R ident
11:25:01.466127 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 1 I ident[E]
11:25:01.468180 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 1 R ident[E]
11:25:01.468546 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 2/others R inf[E]
11:25:02.954797 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
11:25:02.978314 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 2/others R oakley-quick[E]
11:25:03.480886 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
11:25:03.486763 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x1), length 116
11:25:04.032382 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x2), length 116
11:25:06.029801 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x3), length 116
11:25:06.517111 IP LeopardServer.4500 > Home.61169: UDP-encap: ESP(spi=0x088d7e27,seq=0x1), length 116
11:25:06.742918 IP LeopardServer.4500 > Home.61169: UDP-encap: ESP(spi=0x088d7e27,seq=0x2), length 116
And from there it's all normal.
What never works:
10.7 client to 10.7 server
iPhone to 10.7 server
The breakage seems to happen on 10.7 server here:
19:12:35.019173 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x1), length 132
19:12:35.052641 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
After that first ESP packet, the Lion Server responds with another phase 1 ident.
The Leopard server does not.
It may still be something in my setup, but, there's nothing to configure on 10.7 server other than "on" and "off" and some IP addresses, which I'm nearly certain isn't the issue...but who knows. Either the Lion Server ignores whatever is in that ESP packet, and starts over, or, iOS and OS X are sending it something it doesn't like and is forcing it to reset and start over. -
Access Point - AIR-AP1231G-A-K9 - PCs can connect but Apple Macs Cannot ...
Hello,
This is a sort of follow up to a post I made a few days ago. I made changes to my access points and on Windows computers everything works but on Apple products (Macs, iPads, iPhones) the strangest things happen.
(1). About 90% of the time nothing works in that we get NO connection to the Access Point. In the client association logs we see the Mac Address show up but there is a 0.0.0 address where it seems like the device is trying to get an DHCP lease. After a while, the device gets the IPPA address of 169.X.X.X.
(2) After a extended period of time (an hour or more) the Apple device eventually gets an IP address from the network and then is able to successfully connect to the network. However, the connection is short lived and drops after about 30 minutes to an hour.
Is there a problem with the way Apple products encapsulates their network traffic versus Windows or other products?
Again, this not affect any Windows or Andriod based devices (laptops, phones, etc.) They can connect right away and never drop out.
Below is the configuration file for the AP in question, although this is affecting all of our APs:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP-5
enable {Authentication Information}
enable {Authentication Information}
username {Authentication Information}
username {Authentication Information}
ip subnet-zero
ip domain name {Domain here}
no aaa new-model
dot11 ssid (Secure) Staff/Faculty
vlan 70
authentication open
dot11 ssid Public
vlan 60
authentication open
guest-mode
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid (Secure) Staff/Faculty
ssid Public
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
no cdp enable
interface Dot11Radio0.60
encapsulation dot1Q 60 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.70
encapsulation dot1Q 70
no ip route-cache
no cdp enable
bridge-group 70
bridge-group 70 subscriber-loop-control
no bridge-group 70 source-learning
bridge-group 70 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.60
encapsulation dot1Q 60 native
ip address 10.60.255.5 255.255.0.0
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.70
encapsulation dot1Q 70
ip address dhcp
no ip route-cache
bridge-group 70
no bridge-group 70 unicast-flooding
bridge-group 70 spanning-disabled
interface BVI1
ip address 10.60.255.5 255.255.0.0
no ip route-cache
ip default-gateway 10.60.0.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging snmp-trap emergencies
logging snmp-trap alerts
logging snmp-trap critical
logging snmp-trap errors
logging snmp-trap warnings
bridge 1 route ip
line con 0
transport preferred all
transport output all
line vty 0 4
login local
transport preferred all
transport input all
transport output all
line vty 5 15
login
transport preferred all
transport input all
transport output all
endFor initial configuration you can access AP from the Console port.
Following are the guides you need to look at for configuring you 1600 AP :
Cisco Aironet 1600/2600/3600 Series Access Point Deployment Guide
Getting Started Guide: Cisco Aironet 1600 Series Access Points
Moreover you can check the configuration guide from cisco.com/google, based on the Actual software image your AP is running. Some of the newer IOS for AP you can check here.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Can connect via Ethernet but not via AirPort
I'm having some problems using my AirPort in Germany. I can connect just fine using an Ethernet cable direct from the modem (NETGEAR DG632B) but when I have plug the Ethernet cable into the AirPort I can't connect. I beleive it has to do with PPoE settings, which I am not really familiar with.
There are three spots I can enter my account info. 1, on the modem itself via Safari; 2, on the AirPort via AirPort Admin Utility; 3, on the Mac via Network Preferences. I have input my PPoE username/password into the modem while directly connected. I would tend to think that this shoudl be it and that everywhere on the LAN side of the modem would be able to utilize that account. The NETGEAR settings page shows the ADSL port Network Type as PPPOE and the LAN port as DHCP, so I have attempted to set up my AirPort and Network prefs using DHCP. That leads to "You are not connected to the Internet. Safari can’t open the page “http://www.google.com/” because your computer isn’t connected to the Internet." Network Diagnostics shows green at AirPort, AirPort Settings, Network Settings and ISP. It initially shows yellow at Internet and Server which lead to "Failed" on both. Network Diagnostics then asks me to choose my network port configuration (Built-in Ethernet, Internal Modem, Airport,Other). I select AirPort and select my AirPort network. Then all the Status lights except for AirPort turn red and asks if I use a DSL or cable model. I select yes, it asks me to restart the device, I do, it asks if I can restart any other devices, I select no. At that point Network Diagnostics says it is unable to connect to the Internet.
I have down-graded to Airport Firmware v5.5.1 as some have advised. No change. I'm running MacOS 10.4.6
My AirPort is just fine as I can use it to set up a LAN with no problem. I even pulled out my old Graphite base station and tried it. Same thing.
I have tried putting my PPPoE account info into my AirPort, my Network prefs both individually and both at the same time. Nothing. Is there something that I'm missing?You'll need to connect your modem to your AEBS WAN port, configure your AEBS with the Airport Admin Utility, setting up the PPOE to properly log into your modem connection.
You should set up your mac to us DHCP (not PPOE).
THis should allow you to use either the ethernet port or wireless from your AEBS.
I hope this helps!
Maybe you are looking for
-
Satellite U400 - the webcam does not work anymore
Hello guys here is my sudden probloema! About a year ago I purchased a laptop TOSHIBA - Satellite U400 with s.o. WinVista 32bit and with integrated webcam chicony etc. .... For a year, everything worked correctly, but for some days now, the webcam do
-
Does Time Machine actually back up files?
We have a Mac OS X Server on an eMac running for an elementary school. We set up Time Machine to backup to an Intel iMac setting beside it, booted in Target Disk Mode. We had a problem with the Server the other day, and it wouldn't start up. When we
-
Syclo Work Manager 6.1 + SAP Connection Issue
Hello, I have been trying to setup Syclo Work Manger 6.1 and testing the connection between Work Manager and SAP ERP System. I have updated the connectTest.bat with the ERP login details uder test_user, I get an "caught exception null" and the test i
-
Hi All, We are configuring RFC->XI->Web Services scenario. We are using SOAP adapter in the receiver side. We are getting the following error message. soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value o
-
Picture perfect photos on MacBook look fuzzy and blurry on the TV
Why aren't my photos just as clear and crisp on the Apple TV as they are on the MacBook?