Join 2 tables with each other and with a third table

I'm using discoverer 10.1.2.0.2, and i have two tables that are joined together, but also each one of them is joined with a third table.
for example i have two tables X and Y that are joined between them when X is the master and Y is the detail, but i also have a third table Z when the two tables are joined with Z and Z is the master and each one of them (in his relevant join) is the detail.
my question is, if i build a report containing the three tables, will it be a problem?
i mean will the data and the connection between them will be ok?
i already built a few reports and they work fine, but i want to know if anyone knows about problems that might occur in this situation, beacause that Y is some time a details in his join to X, but in the other time it can be something else (because of the join with Z that they both have).

Similar Messages

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

I have a Mac pro (10.7.5) and two PC's(windows 7). I am unable to ping either of PC through Mac. However Both PC's reply ping to each other and to Mac as well. Help me with this. Searched Internet. Cant resolve till now

I have a MB pro (10.7.5) and two PC's(windows 7). I am unable to ping either of PC through Mac. However, Both PC's reply ping made to each other and to Mac as well. Help me with this. Searched Internet. Cant resolve till now
Regards
MacIts.

Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
is the reply m getting.

When I connect via face time with my friend's ipad or iphone we can see each other and I can hear them but they can't hear me. HELP!

When I connect from my mac via facetime with my friend's iphone or ipad we can see each other and I can hear them but they can't hear me. The mute is not applied, and the microphone seems to work with other applications. Help!

I have same issue in my MB Air with Snow Leopard. It used to work fine but one day I found that the mic mute was locked on. I went to System and ensured mic was working by seeing the bars move. I went to Facetime > Video drop down and it is all greyed out so not active and the mic symbol in Facetime pane has a line through it (muted) and is dead. I have tried everythinng to UNmute the mic. Two way video is fine and I can hear the other party perfectly. Seems like this happened about the time of a Snow Leopard update but may be wrong. Issue is several months old and, well, getting old! I love Facetime with my grandkids etc. who all use Apple stuff. There HAS to be a way to reactivate the mic in my MB Air. Could someone please help??

HT203164 I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/

I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.

Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked!

Computers on network can't see each other and can't communicate

I have a Linksys router, WRT54G, which calls itself wireless but has only wired connections.   I have my computer and my phone (for Vonage service) plugged into it.    My router is then connected to the household router by a CAT 5 cable.   The household router is also a Linksys; wireless and with plugs for a half dozen computers.
I get teh Internet fine with no problem, but we want to share my printer on the household network.   My housemate cannot see me on the household network and can't see my router either, and can't communicate with my computer with the \\Name command.   I can't see the household network and can't communicate with my housemate's computer with the \\Name command.
I am running Windows Firewall.   I am sure that so is my housemate.
Is there something special we have to do to set up our routers for the household network to work properly?
It looks like I'm supposed to configure my router to communicate with another router instead of connect directly to the Internet, but when I tried htat and enabled interactive adjusting or whatever I suddenly couldn't access the Intenet and my phone couldn't get a dial tone, until I changed it back.
Tehre isn't any explanation of how to do it anywhere.   There aer technical descriptions of what each thing does but I don't see where it says how to set it up or how to troubleshoot.
I don't know if we were supposed to set up networks and manually add each other's computers. Apparently my housemate did not have to do that with his wife's computer or his notebook.    They just show up in the network.
Yours,
Dora

Thanks for your help.   Unfortunately between when I last looked at your name and when I managed to reply I forgot your name.
1. For the option that the parts of the network can see each other, you plug the cable into the OUTGOING port of the SECONDARY router?    That doesn't make a whole lot of sense; how cuold that possibly work? The way I understand it, the signal can come in only through the incoming plug, which you call the "internet" plug, if I'm understanding you.
2. If you choose the setup that makes any sense - the cable is plugged into the incoming plug - the "internet" plug - on the secondary router, and the ethernet connection on the primary router, can all the computers see each other and their resources, ie, printers they want to share?
3. If not, why on earth?
4. for the second option, it looks like some steps are missing.   Why don't you need to disable DHCP and set the router to be a secondary router?
PM me for my contact details.
Thanks!
Yours,
Dora Smith
(Mod note: Edited post for guideline compliance. Email address removed. Use the PM system please. Thanks!)
Message Edited by JOHNDOE_06 on 02-25-2009 08:39 AM

HI. I would like to arrange over 30 pictures into one grid-like ARRANGEMENT. (meaning above, below, left, right, of each other and so forth to form a rectangle)

HI. I would like to arrange over 30 pictures into one grid-like ARRANGEMENT. (meaning above, below, left, right, of each other and so forth to form a rectangle)
Please help...thx

You messaged me that the contact sheet look is what want but w/o spaces.
One method is to actually start with the PSE contact sheet tool. I assume your version has it (mine is PSE 2). Maybe your version has an option to remove spaces; mine doesn't. In this example I created a sheet of 4 rows and 3 columns, with the option to not flatten the layers. Each picture appears on a separate layer.
On each row I moved the left and right pics inward to remove the spaces between the pics:
Activate the Move tool. Click on the left pic and use the arrow keys to move it inward. Same with the right pic.
Now to remove the spaces between the rows. To make this easier. lock together the pics on each row. Here I locked the pics on the top row, then used the arrow keys to move the row as a unit downward. An alternative method would be to merge the 3 pics on each row and move that merged layer. Do the same for the remaining rows.
This method works of course if the pictures are all the same size and all aligned vertical or horizontal.
If you don't want to use the contact sheet tool (e.g., if the pics are different sizes or alignment) you can do this:
Create a blank canvas.
Open a picture, select it (Select > All) and copy to the clipboard (Edit > Copy).
Activate the blank canvas and Edit > Paste. The picture will be placed on its own layer.
Do the same with the remaining pics and use the Move tool with mouse and/or arrow keys to position them where you want.
The advantage of the first method is that the rows and columns are precisely aligned. Using the mouse to align the pictures could be a little tricky.

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance, As it is shown in the figure below. and enter this signal in a daq.
Solved!
Go to Solution.

By the time you spend for the nice diadram you might have done the vi
Your DAQ like to have a waveform (array of values and dt ak 1/samplerate)
If you set the samplerate you know the array length , create a array of zeros, and set the values of both amplitudes ...
Since I don't want to wire others homework here are some pictures
And there are some drawbacks is room for improvement in my solution, just think of rounding errors ... and what might happen if the arrays get bigger ....
Spoiler (Highlight to read)
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Headings and other print run into each other and I cnnot see all the print in some boxes on vrious web sites. I have removed and re-installed more than once.

copy on the web pages overlap.....headlines appear over other print.....link tabs are on top of each other. I have removed and re-installed Firefox many times. This does not happen with other browsers. Also, some web sites show sections that are off center.

Hi,
Please see [https://support.mozilla.org/en-US/kb/Firefox%20prints%20pages%20in%20a%20different%20layout this]. If the site has a Print button/icon you can try to use that. On some sites you can also try to right-click the content > '''This Frame''' > '''Print frame'''.
[http://kb.mozillazine.org/Problems_printing_web_pages Problems printing web pages]
[https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Firefox prints incorrectly]

E4200 - PCs don't see each other and printer on USB port not working

I been around tech all my life. Acquired by MS when they had only 2000 employees. I don't get excited about tech. Its a tool to help you do something better, excluding games. I had the linksys wrt54... with booster antennas. Worked great, but could not reach one room, the furthest away. Even though I retired 10 years ago I do some private work for fun. I was required to change from 16bit WEP to WPA. My WRT54 just missed the cut off so I went and bought the best home product they had;
*I have 8 computers and connecting them was time consuming *The computers with same settings don't all see each other. The printer port USB off the hub is a great idea if it worked. They have an upgrade to fix this but ever time I try to install the firmware it fails.
This product has...
Fast connection
Short range
Reliable connection
About me...
Technology guru
I use it in...:Large home

In reference to the issue that you are facing I would like to recommend you few things.
For computers to see each other on the network and to share information they have to be in the same work group, file sharing should be enabled on all the computers and they have to be in the same network. If you are still facing issues, try to disable the firewall on the computers.
As far as your printer is concerned, I would like to know whether you are trying to install the printer with the help of cisco connect, if yes, then please try to upgrade the latest version of cisco connect and then follow the link below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1f15297303cd4080b17d40fa3d4c1126_Connecting_a_USB_...

In FCPX can I stack clips of multiple angles on top of each other and choose what parts I want to make my movie out of?

Hi there
I'm debating whether to purchase FInal Cut Pro X or not and I'm new(ish) to video editing.
What I have done so far is produce a music video mimed to audio and shot at about 20 different angles. Each angle is the length of the ENTIRE song, not just snipets.
What I want to be able to do is have those 20 videos sitting stacked up on top of each other (completely synced to the audio) and be able to choose what parts of what video I make my final video out of.
So I want to be able to tell the system to start at angle 1, then at a specific time move to angle 6, then angle 19, then back to angle 1, then angle 16 etc etc etc.
But I dont want to cut up the parts of each camera angle first, I want to be able to select a specific part to play from each ENTIRE camera angle.
Is this possible please? And also what is the correct terminology for this process?
I apologise for not using the correct terminology here, as I dont know the correct words for what I am trying to explain.
Thanks

FCPX mulitcam editing is the most advanced of any NLE on the market at the moment.
Read the user manual here to learn how Multiclips work.
http://help.apple.com/finalcutpro/mac/10.0.6/#ver23c76439
You'll want to learn about how to work with Audio Channels with multiclips, also. Very powerful.
http://help.apple.com/finalcutpro/mac/10.0.6/#verc1fab5f6
Here is my article on audio channels in Multiclips.
http://www.macprovideo.com/hub/final-cut/final-cut-pro-multiclip-audio-channel-e diting-1006

Firefox 34 and Norton Internet Security (Version 21 ff) Don't Like Each Other and It's Not the Toolbar!

I have discovered that Norton Internet Security (and Norton 360 as well) version 21 and after conflicts with Firefox version 33.0 and later. I have been running the latest Firefox 34 version. When I upgraded on two of my computers to the latest version of NIS (version 21) Firefox (version 34) froze; indeed it locked up the entire computer. I therefore installed Google Chrome and everything worked fine. I can reproduce this error with Firefox like the flip of a switch; it is very consistent! The conflict, by the way, does not go away by disabling the Norton toolbar. I want to continue to use Firefox, and not Chrome, but I don't want the browser to freeze the machine. I run Windows 7 Professional. Do you have any suggestions?

Oh... I spoke too soon. I went into my office today and ran Norton 360 (Version 21.6) and Firefox 34.0.5 thinking that all would be well because I shut off Hardware Acceleration. Boy, was I wrong. Norton 360 crashed with the Windows message: "Norton 360 has stopped working; it will be shut down." I immediately shut down the computer (even though someone was actually in my office at the time), rebooted, no longer ran Firefox and did a complete virus scan. All is well if I do not use Firefox 34. And so.... I am going to make my life easier and simply move over to Chrome at least on my office machine. I just don't see any other way out of this predicament. I do this reluctantly because Chrome is much slower than Firefox is especially the way I run it. Firefox 34 and NIS Version 21.6 just don't like each other.
Thanks for your help. It's been a good thread even though I could never figure this out.
Needs more help.

Since downloading the most current iTunes software I can no longer print the insert (label) for a jewel case. The songs are printed over each other and can not be read. Any suggestions? Thanks.

Since downloading the most current iTunes software I am no longer able to print an insert (label) for a jewel case. I click on print, choose jewel case and then it doesn't matter which option I choose for the insert it will only print the songs over each other in a 1 inch section so that it can not be used or read. If instead of clicking on the jewel case I click on list it works fine and prints an appropriate list. I have always updated the iTunes software the first time I am offered to do so and I have never had a problem printing the jewel case inserts. Since this issue is not about a piece of hardware iTunes help will not help me.

Did you ever get a response?
If you so how did you correct the problem?
I have the exact problem you had.
Please let me know.
Thank you
<Edited by Host>

Please move the 'SEND' and 'SPELL CHECK' options away from each other, and when sending, ask the question, 'Are you sure you want to send now?' Thanks

The send and spell check options are next to each other. I can not tell you how many times I hit the send button be accident. When sending, and question of 'Are you sure you want to send now?', should be asked.
Thanks

Actually, unless something has changed, you can set Thunderbird to run an automatic spell check when you click Send. That might be your best workaround.
Tools menu > Options > Composition panel > Spelling mini-tab
(You can display the classic menu bar by tapping the Alt key)
It might also be possible to customize the toolbar, but I think this might be safer.
Regarding a general confirmation for sending, I noticed some add-ons for that, but I don't have any personal recommendations.

TS2755 My wife and I have IPhone 5's. For some reason, we can call each other, and if I text her she gets it, but if she texts me I don't get it. Any one else ever have something like this happen?

My wife and I have Iphone 5's. For some reason, we can call each other, no problem, but if we text she receives my texts but I don't recieve hers. Any one ever have a problem like this, and more importantly, a solution? Thanks!

In Settings> Messages
make sure iMessage is turned on, and
in Settings> Messages> Send & Receive...
make sure you have your phone number listed under "you can be reached by imessage at"

Join 2 tables with each other and with a third table

Similar Messages

Maybe you are looking for