"Join Failed" When Attempting Multi-way Text Chat

iChat AV 3 under 10.4.5 on iMac Duo behind WRTG54 behind Adelphia Cable modem. One-on-one text chat works. Likewise one-on-one audio and video. But multi-way text (didn't test multi-audio/video) fails with "Join Failed" error as soon as I enter a second message (the very first outgoing message appears in the chat window, the second locks it up until the error is cleared).
Curiously, I can participate in multi-way text chats that are initiated elsewhere. Tried 3 different machines, all behind the same router/modem. Tried one of those machines connected directly to the cable modem. No joy.
Any help/ideas/troubleshooting hints very much appreciated.

Hi Hans,
iChat uses port 5190 on the TCP protocol to log in to AIM and text chat 1-1.
To send files in text chats (or Pics) and doing Group (yext) Chats requires that port 5190 is also open to the UDP Protocol.
As the router is doing UPnP this shoul be covered there.
I would look towards the modem and how that is set up and possibly the Mac Firewall if On.
See here for Pics and Instructions on the Mac Firewall.
We would need to know if the modem is routing and has ports for iChat set up ?
10:23 PM Sunday; March 5, 2006

Similar Messages

Multi-way video chat using iSight--problem.

On the Apple website, when you multi-way chat (with more than one person) using iSight it is supposed to have all of them set up as though you are looking at each person in a different pane, almost like sitting around a table. See here: http://www.apple.com/imac/isight.html
When I tried it tonight with two buddies who have MacBooks (I have an iMac) it didn't look like that. It had two panes (like a book that is standing open) and on the left pane it said who had invited me to chat (in white letters on a black background) and on the right there were three panes right on top of each other, each one flattened out. The middle pane had a frozen/distorted shot of me and the top and bottom had distorted (though moving) video of my two buddies--not at all the way it's supposed to look from the website. Although, it did have the small video pane of me in the center bottom (as the website shows).
Any ideas?

Hi mac westwood,
Welcome to the  Discussions
Do you get this on every multi-chat ?
Have you restarted iChat between tests ?
Restarted the Computer ?
Repaired permissions ?
Run the Cron Scripts ?
Tried the Combo Install ?
11:54 AM Wednesday; August 1, 2007
Message was edited by: Ralph Johns (UK)

New lines created in excel when displaying multi-line text item value

Hi all,
I put the value of a multi-line text-item into a csv file :
DECLARE
file_filter VARCHAR2(256) := 'Export Files (*.csv)/*.csv/All Files (*.*)/*.*/';
fExp VARCHAR2(256);
in_file Text_IO.File_Type;
linebuf VARCHAR2(4000);
BEGIN
fExp := get_file_name ( directory_name, file_name, file_filter, NULL, SAVE_FILE, TRUE);
IF fExp IS NOT NULL
THEN
set_application_property(cursor_style,'BUSY');
in_file := Text_IO.Fopen( fExp, 'W');
linebuf := NVL(:com_bnc_possibles.LIBEL_TRAITE,'') || ';' ||
NVL(:com_bnc_possibles.NUM_ANFR_ID,'') || ';' ||
                         NVL(:com_bnc_possibles.ver_fiche,'') || ';' ||
                         NVL(:com_bnc_possibles.titre,'') || ';' ||
NVL(to_char(:com_bnc_possibles.date_creat, 'dd/mm/yyyy'),'') || ';' ||
NVL(to_char(:com_bnc_possibles.date_valide, 'dd/mm/yyyy'),'') || ';' ||
NVL(:com_bnc_possibles.LIBEL_STATUT,'') || ';' ||
NVL(:com_bnc_possibles.label_reg,'') || ';' ||
NVL(:com_bnc_possibles.nom,'') || ';' ||
NVL(:com_bnc_possibles.prenom,'') || ';' ||
NVL(:com_bnc_possibles.nom_societe,'') || ';' ||
NVL(:com_bnc_possibles.comp_bnc,'') || ';' ||
NVL(:com_bnc_possibles.motifs,'') || ';' ;
Text_IO.Put_Line( in_file, linebuf);
Text_IO.Fclose( in_file);
set_application_property(cursor_style,'DEFAULT');
END IF;
END;
And when I opened the csv file then the remaining lines , that is from the second line , of the column "motifs" are displayed through the column A of excel. The "motifs" multi-line text-item has 500 as its Maximum Length property value, and has a Char Data Type property value.
So how to display all the motifs' lines through the same column M without displaying the remaining lines in column A ?
Or are there tips to remove CHR(13) characters from a multi-line text-item ?
Thank you very much indeed.
Message was edited by:
andrianiaina

Hi,
I tried to do it in different way. What i did is I have created a item of type formattted text and set its text like:--
<html>User authentication failed. <br*> Cause: Invalid password.</html> --remove *
So I am able to see the prompt like :-
User authentication failed.
Cause: Invalid password.
Hope this helps you...
Thanks
--Anil

Hyperlink box is not active when attempting to link text to a webpage

In Numbers Application, I attempted to link text in a box to a web page.
The Inspector box for Hyperlinks was not active.
It also was not active when I attempted the same through Insert
Suggestions?

You can link to pages or destinations:
http://partners.adobe.com/public/developer/en/acrobat/PDFOpenParameters.pdf

Voice Recognition Function Not Working When Starting Video/Audio/Text Chat

The Speech Function with Voice Recognition is really neat, but I am having one problem. When I say "Video Chat with Tom Smith" it will say "Tom Smith is not in your iChat Buddy List." It recognizes the name, but it says the person is not in my iChat buddy list and will not let me video chat with that person. How can I fix it so I can video/audio/text chat with someone using the speech function?
Message was edited by: anishmsheth

How can I fix it so I can video/audio/text chat with someone using the speech function?
http://support.apple.com/kb/TA27509

Generated Script fails when attempting to drop Foreign Key Constraint

I made some changes to my database. I used the generate script process to generate a drop and create script to these tables. The generated script first ran Alter Table Drop Constraints to drop the Foreign Key constraints and then did Drop tables
and then did create table to construct the script with the proper changes.
However, when we attempted to run the script, all of the Drop constraint statements failed reporting that there was no such constraint. Then the drop table scripts failed because of the existence of the very foreign key constraints that SQL Server
had just stated did not exist.
BOL states that the statement "DROP { [ CONSTRAINT ] constraint_name | COLUMN column_name } " is "Used in a CHECK, FOREIGN KEY, UNIQUE, or PRIMARY KEY constraint." So why couldn't I drop those specified Foreign
Key constraints in a script generated by SQL Server itself.
Edward R. Joell MCSD MCDBA

Are you sure there are no Constraints on other tables which are causing your issue?
If a foreign key from table abc refences table def it will cause the drop to fail.
If your script is already attempting to drop such constraints, have you checked that they are dropping from the correct table (and not the table that would be the target of the drop)?
I discovered two things yesterday and one thing today about generated scripts.
When you generated a script to drop and create a set of tables and you mark it to include foreign keys, the generated script will first create a set a scripts to drop the foreign keys , then will create a set of statements for each table that will,
first, again drop the same foreign keys that it did earlier, then drop the table. If there is no "if exists" statement for each statement, the drop constraint will fail.
The script generated by the generate scripts wizard, even when you set the Drop and Create option in the advanced tab, unlike the scripts generated when you right click a table and select Drop and Create from the context menu, does not by default create
an "If Exists" statement before the attempt to drop anything.
You can make the generate Scripts wizard generate an "if exists" statement by changing the "Include if NOT EXISTS" option on the advanced tab to true. However, while the script generator will find all of the foreign keys that show that
table as the parent_id, it will not show the FK constraints on tables which are not being dropped and created. Nor can you find them by querying the sys.foreign_keys view using the standard type of Foreign Key "If Exists" statement because
it would do a query like
SELECT *
FROM sys.foreign_keys
WHERE object_id = OBJECT_ID(N'[dbo].[FK_prc_ContractSubLines_prc_PRSubLines]')
AND parent_object_id = OBJECT_ID(N'[dbo].[prc_ContractSubLines]')
And the script generator does not care even if you show an option like "Generate Scripts For Dependent Objects", it will not generate a drop script for the foreign constraints on other tables that reference your table. I have not even found
a way to get back the results of a query on the sys.foreign_keys view that will show those keys that reference your table. The only thing I been able to do is to open the table in design and check out the list of relationships in your table and see open each
relationship and see which table is the "foreign key table" rather than the primary key table. This will make writing drop and create scripts very very long and tedious. As you would have to create addional Alter tables scripts to do a drop
and create foreign keys on each table referencing yours and manually place them into your scripts at correct locations. This is almost as bad as the Oracle SQL Developer's generate script results which (at least in 2010) so screws up the order of the generated
script that it is trying to create foreign keys on tables it has not created yet.
So Patrick I see that you thought about the foreign keys on other tables. I wish I had read your post before spending the morning troubleshooting this issue based on this morning's script that ran and crashed embarrassingly.
I would like to know if someone has a query to reveal all of the foreign keys that reference your table from another table using the sys views. As it is I have to open each table in design to get a list of FKs that reference it.
Edward R. Joell MCSD MCDBA

Install Failing when attempted to Add a new Management Server into SCSM Management Group

Hello Experts
I am adding a additional MS into my current SCSM 2012 sp1 MANAGEMENT Group. But its failing with the below error message .One thing is little wiered here is ...that the wizard fails with the message that the UPGARDE FAILED , but I am not rying to upgrade
, I am adding a MS on a new 2012 vm. It goes all the way and install the services with the account , but then it rollbacks everything I am installing the bits with the same account which is the admin on the workflow server . I have created a registry
key ServicesPipeTimeout to 600000ms , but still no luck . The new VM is all up to date with patches , the sdk/config account is the admin on the new ms vm . The service manager db is a cluster , not sure if that's wats causing it .
SCSM2012 SP1
Primary Workflow MS : WIN2008R2
SQL CLUSTER : 2008R2SP1
New MS :- WIN2012
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart
WaitForSDKServiceStart:Entering
WaitForSDKServiceStart: Error: The client has been disconnected from the server. Please call ManagementGroup.Reconnect() to reestablish the connection.,
Stack:    at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.EnterpriseManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internalsProxy)
   at Microsoft.EnterpriseManagement.EnterpriseManagementGroup.Connect(EnterpriseManagementConnectionSettings connectionSettings)
   at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart(Session session)
MSI (s) (B8:98) [16:36:03:050]: NOTE: custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:78) [16:36:05:044]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1156350899,LangId=0,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (B8:78) [16:36:05:044]: Executing op: DialogInfo(Type=0,Argument=0)
MSI (s) (B8:78) [16:36:05:046]: Executing op: DialogInfo(Type=1,Argument=Microsoft System Center 2012 - Service Manager)

D5DB645B01E7},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.Core,fileVersion="7.5.2905.0",version="7.0.5000.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:669]: Executing op: AssemblyPublish(Feature=SMCommon,Component={4D0CB3BB-D941-408A-AA30-F8B7996AB220},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.Packaging,fileVersion="7.5.2905.0",version="7.0.5000.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:675]: Executing op: AssemblyPublish(Feature=SMCommon,Component={B6133F85-0B89-4120-ADFD-9A426FB7D5A3},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.OperationsManager.Common,fileVersion="6.0.6278.0",version="6.0.4900.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:681]: Executing op: AssemblyPublish(Feature=SMCommon,Component={58A6B313-BD98-46E0-B344-0D6861535208},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.ServiceManager,fileVersion="7.5.2905.0",version="7.0.5000.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:688]: Executing op: AssemblyPublish(Feature=SMCommon,Component={41071460-6573-41C8-AED8-06CEC0D0AFB9},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.DataWarehouse,fileVersion="7.5.2905.0",version="7.0.5000.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:693]: Executing op: AssemblyPublish(Feature=SMCommon,Component={E51AEF3C-9B2D-4B0E-AB7E-AD0423899C39},AssemblyType=1,,AssemblyName=Microsoft.EnterpriseManagement.OperationsManager,fileVersion="6.0.6278.0",version="6.0.4900.0",culture="neutral",publicKeyToken="31BF3856AD364E35",processorArchitecture="MSIL",)
MSI (s) (80:88) [11:29:02:713]: Executing op: AssemblyPublish(Feature=SMCommon,Component={9718BF1D-6A9F-3406-A992-630F7EF2F164},AssemblyType=2,,AssemblyName=Microsoft.VC90.CRT,version="9.0.30729.1",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32",)
MSI (s) (80:88) [11:29:02:720]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitUninstall.62894CB9_4320_40DB_B4E4_C0347FAB97B6,,)
MSI (s) (80:88) [11:29:02:721]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitUninstall.62894CB9_4320_40DB_B4E4_C0347FAB97B6,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (80:88) [11:29:02:722]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitInstall.62894CB9_4320_40DB_B4E4_C0347FAB97B6,,)
MSI (s) (80:88) [11:29:02:724]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitInstall.62894CB9_4320_40DB_B4E4_C0347FAB97B6,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (80:88) [11:29:02:725]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitUninstall,,)
MSI (s) (80:88) [11:29:02:726]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitUninstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,)
MSI (s) (80:88) [11:29:02:726]: Executing op: ActionStart(Name=NetFxExecuteNativeImageCommitInstall,,)
MSI (s) (80:88) [11:29:02:728]: Executing op: CustomActionSchedule(Action=NetFxExecuteNativeImageCommitInstall,ActionType=3649,Source=BinaryData,Target=ExecNetFx,CustomActionData=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft
System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.ConsoleFramework.dll" /queue:1?500?C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.Foundation.dll"
/queue:1?500?C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.Controls.dll" /queue:1?500?C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe
install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.ViewFramework.dll" /queue:1?500?C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service
Manager\Microsoft.EnterpriseM
MSI (s) (80:88) [11:29:02:729]: Executing op: ActionStart(Name=_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429,Description=Configure Config Service,)
MSI (s) (80:88) [11:29:02:734]: Executing op: CustomActionSchedule(Action=_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429,ActionType=3585,Source=BinaryData,Target=ConfigureSDKConfigService,CustomActionData=1 OMCFG)
MSI (s) (80:88) [11:29:02:736]: Executing op: ActionStart(Name=_ConfigureSDKConfigService,,)
MSI (s) (80:88) [11:29:02:737]: Executing op: CustomActionSchedule(Action=_ConfigureSDKConfigService,ActionType=3585,Source=BinaryData,Target=ConfigureSDKConfigService,CustomActionData=1 OMSDK)
MSI (s) (80:88) [11:29:02:738]: Executing op: ActionStart(Name=_WaitForSDKServiceStart,,)
MSI (s) (80:88) [11:29:02:840]: Executing op: CustomActionSchedule(Action=_WaitForSDKServiceStart,ActionType=1537,Source=BinaryData,Target=WaitForSDKServiceStart,)
MSI (s) (80:88) [11:29:02:924]: Executing op: ActionStart(Name=_RegisterSdkSCP,,)
MSI (s) (80:88) [11:29:02:944]: Executing op: CustomActionSchedule(Action=_RegisterSdkSCP,ActionType=1089,Source=BinaryData,Target=RegisterSdkSCP,CustomActionData=SCSMPROD|DOMAIN\_SVCACCT|SMSDKSCP)
MSI (s) (80:6C) [11:29:03:103]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI16CE.tmp, Entrypoint: RegisterSdkSCP
CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSI16CE.tmp-\
CAPACK: CLR version v2.0.50727 is installed.
CAPACK: CLR version v2.0.50727 is detected.
CAPACK: CLR version v4.0.30319 is installed.
CAPACK: CLR version v4.0.30319 is detected.
CAPACK: Binding to CLR version v2.0.50727
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\_SVCACCT
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\_SVCACCT
RegisterSdkSCP: Error: Access is denied.
StackTrace:    at System.DirectoryServices.Interop.UnsafeNativeMethods.IAds.SetInfo()
   at System.DirectoryServices.DirectoryEntry.CommitChanges()
   at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP(Session session)
MSI (s) (80:6C) [11:29:10:243]: NOTE: custom action _RegisterSdkSCP unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
MSI (s) (80:88) [11:29:10:246]: Executing op: ActionStart(Name=_SetupSdkDefaultConnector,Description=Setting SDK default connector,)
CustomAction _RegisterSdkSCP returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (80:88) [11:29:10:265]: Executing op: CustomActionSchedule(Action=_SetupSdkDefaultConnector,ActionType=17921,Source=BinaryData,Target=SetupSdkDefaultConnector,CustomActionData=EDVXSCSMWEBPP02)
MSI (s) (80:88) [11:29:10:366]: Executing op: ActionStart(Name=_CreateSetupUser,,)
MSI (s) (80:88) [11:29:10:381]: Executing op: CustomActionSchedule(Action=_CreateSetupUser,ActionType=1537,Source=BinaryData,Target=CreateSetupUser,CustomActionData=DOMAIN\_SVCACCT)
MSI (s) (80:88) [11:29:10:461]: Executing op: ActionStart(Name=_CreateInstanceQualityRelationship,Description=Creating Default Instances, Qualities And There Relationships,)
MSI (s) (80:88) [11:29:10:481]: Executing op: CustomActionSchedule(Action=_CreateInstanceQualityRelationship,ActionType=17921,Source=BinaryData,Target=CreateInstanceQualityRelationship,CustomActionData=Cmdb^Microsoft.SystemCenter.ResourceAccessLayer.CmdbResourceStore^Ral.CmdbResourceStore.Cmdb^SCSMSMDBDOMAIN,DOMAIN^ServiceManager^Microsoft.SystemCenter.ResourceAccessLayer.Stores|Ods^Microsoft.SystemCenter.ResourceAccessLayer.SqlResourceStore^Ral.SqlResourceStore.Ods^SCSMSMDBDOMAIN,DOMAIN^ServiceManager^Microsoft.SystemCenter.ResourceAccessLayer.Stores|Workflows^Microsoft.SystemCenter.ResourceAccessLayer.SqlResourceStore^Ral.SqlResourceStore.Workflows^SCSMSMDBDOMAIN,DOMAIN^ServiceManager^Microsoft.SystemCenter.ResourceAccessLayer.Stores|Orchestration^Microsoft.SystemCenter.ResourceAccessLayer.DagResourceStore^Ral.DagResourceStore.Orchestration^EDVXSCSMWEBPP02^Dag^Microsoft.SystemCenter.ResourceAccessLayer.Stores|Sdk^Microsoft.SystemCenter.ResourceAccessLayer.SdkResourceStore^Ral.SdkResourceStore.Sdk^EDVXSCSMWEBPP02^Sdk^Microsoft.SystemCenter.ResourceAccessLayer.Stores$Cmdb^Cmdb|Ods^Ods|Workflows^Wo
MSI (s) (80:88) [11:29:10:551]: Executing op: ActionStart(Name=_CreateSLAOOBMetric,,)
MSI (s) (80:88) [11:29:10:593]: Executing op: CustomActionSchedule(Action=_CreateSLAOOBMetric,ActionType=1537,Source=BinaryData,Target=CreateSLAOOBMetric,)
MSI (s) (80:88) [11:29:10:669]: Executing op: ActionStart(Name=_AddAuthenticatedUserToSmEndusersRole,,)
MSI (s) (80:88) [11:29:10:687]: Executing op: CustomActionSchedule(Action=_AddAuthenticatedUserToSmEndusersRole,ActionType=17921,Source=BinaryData,Target=AddUserGroupToSmRole,CustomActionData=SERVERNAMEDOMAIN,DOMAIN|0CDDEB2B-5AC7-4E9b-8918-F73A5A5DC5FA|S-1-5-11)
MSI (s) (80:88) [11:29:10:764]: Executing op: ActionStart(Name=PublishFeatures,Description=Publishing product features,Template=[1])
MSI (s) (80:88) [11:29:10:769]: Executing op: FeaturePublish(Feature=SMCommon,,Absent=2,Component=(q3HBAv]i@qJ'%Q!&u`-E'vFHJKp&?B*BP3I&v8CI)GV$dS}K9o{`+oQzOH`6rk8o}k)$9h9ht?25ep*M5[kQmAiu8ksDfcfd?7Y`cA}%6azL=&%e(j@mj@Fz,ecq(qrp8](TKe3L$PCRH97spltW=ku%.hsb*,Om8nB9k-6cA0[3pMQTZ)ilXhqI.}^o8,EuQO7^U_3+@[M`@}[t9u8Wo6!tFc%bh)^7q6wW=apEHCHH1,?v,UEvGBSJArZu~HLod%Kb5o96e+p$903LI])2$p$F%OJdG^%+A=LH+73@4VPU6Grpj92,@+LF6KK25&]=f`,Pw3-%=3zM^iId4@ZCcxSHi&g39aNS8{R&72hWL`[email protected]`]AQmIfehM.h8y$eKidM0ZZCIg^udzEY?vKfT%PHraR*_a5.zP5_@[KW{oCEn$OB[,Y5D*`m9ByA])z,POCbb@sj&oXSAAcoGYM11_t!LQ[A2'u.90@8@Eats}$VHsbIFnRS=HM!!AA67_?kk^q?LXxN=r$8P(zZWMJJ{9@Z'[&R=ibW(AelUb.T7J9-G*B~='`,6hc~mWukk*QjX6`=?+MOCxGuQnGmy*71a$.d=q2UJvQ$^-E1ev?yK?40?AC856b78PAvp@-+AM.W?c~waDTv0,B3zl1iw%vO9)BKj!jy7~r^wE3]d*T-@NwxfGl[ns7%KANUrxZ_9)ODbn-q(ifd)oMIA18&?By'*2%,lY+,!UmZHa]_8+TSP[td}bT-CL%NNDP3?Z*yqPzZpJL.g@_oYZZZ@f!r?*1+']Zj]ZqjdIrE93ZaoSS_`udf%hNKO=9j?aFhCl*?,uleMNZ1Z~ZE9FqKxu+Isz3ow_9L8eB^=3X9%1XjT_huv(S=Kofh9JKrEq.?bB!L`vCwRLC3@2y4WO-0'Ic%eNDY,x-y@1n30[^'z+cLCX]e[=7a8'W6k*?}q&'br-YB(.!`@fw0~&p`8-=Mnx6qys!X9TQW^09zZ@pU
MSI (s) (80:88) [11:29:10:821]: Executing op: FeaturePublish(Feature=SMServer,,Absent=2,Component=Ik{Op{5Kr=GT6Le$}XC3c6,M6L((V9pkVNH,10cG1+tmy*`TG?4+OQ_V,p$dVCsu8xeQf9Brt8)ud$Sf^SsJTSpso8TFvFZg+*V!vIFSk4eIY98NOU2f+BvOK_yzaR8Je9TA*L3kFh1Q^c{'C@}z5=0HxnJ+Ye5m?Bt&'[email protected][Q%j-V=`9aWmoOnwf@bG~tm6{U72@o$9HI1rY8sqD'n71MVZ?sjtIJ^RR~x(I9V?3bEV9=E%_oQj-dfO26gb,)~X?v_5H&}8OBC,Zd3FO*6x?^&vV^oAnT8W]VCJ5{1D?cF2hz^y{{p&uDdwpd}h8`NZJv_a3H!)feXUfw]v?_@*Otsy%B'YK$aq~=M9AbjW10uEDJQXE)3'L82.?,2W6FLDxVGn^9T&=1y~9]TMt7^XvHXTYuO[z=6}@L_^wh,(g}ZqJ^O1bEhS?r)iI.5E.A7i&@zDQdtV='FS(W8wl!b1yF'DVKLY={M5MYbn*wOxsSgjVY3D@oGP5W(_$7[fx&!R(pHF=T%$LsMp7?spYDG3w!zC?5B2{8,F)[H!uUfS0'_m?$WG=P,jT7WOo2W_*dsE@=5jq^lyW?1(8?&32w,NAkc8wJs8GCEu1_2Xc^g[?VhL-,XO~{,H,a]zRr,2=]XThvu.EBR0v?pCd&1@?-Rud!Nf*yt-S'NdXk~P99PFN(w0J9RAmQC40IY9AQKBcb!S?=CnT=EuzE1q=w)`V(40a'jdyXR+pN}`A.UP3IQjE(9xOtNZV!)e9YJ=NzOE[$(Itp!&{M^09-FPfKKbD1uIz}V_z3K^9t3U4Tvo(Gq8eyV`z3K^9b)@zEvo(Gq}1+M!-vLb9Y{kU8s)9cs`p`b,X*][=!CtK^UfdUy]u[kDa&5C?dr&Nb_m6L%E'Tes__*W=Cf)0-^yp**S{$*8j'~D=bv,m!@w5F5^Yvr?u^T??[Dr^?X5&DC{BJ]9S.IY?X_+EYCq`~aII17]HE$Y=G,N.-Z]Nu9F
MSI (s) (80:88) [11:29:10:862]: Executing op: FeaturePublish(Feature=SMConsole,,Absent=2,Component=-t's,QtH^Aw+6FO*=Se(iQRgqk%_g=dT63!k9!rD@dhrK&d7h=K@C5tXh+0WxiGiG5${}83t&igNy{fY&JO-tv~W3Ah1fGYB1.`B!^o%uu!H)9R}66fvSA0Wv%z,9-1jG9y?v}nwk!s?K=B`'Nk^.93`591RA^Ebzru^Hg?vMA6WScC*[V.DUtMfGl+Os98*Wc&+YY[2abg{3@n-]@5Gxvon=g76CVQ~Ijn^X9P2H12*)v(!KYwG+v*QS={[,{TMbA'(jZhl`KmU$?Vez&@)YK[mVm~2X&18E@])Ry4^X^KQ`vnk@+v{B?dAn}YD*9*5S_~w'M?2c?s8Sf^yA)9@nE@ABBSrt8T++.V{d4gb6,p$83`m4?OV9^r0F`IO[`o_-lb2}91AcKjfKCE2=q?*Gk,g'?2O7pkHrC*](^yu[K}-S9elzyj=2zt[iF(M2nb-z9sgF?29J6($ZQAS%izDO9oq$k`dG4]?OicWT^[Y=AlFJBP05%gId7HBQ9jDv?bh(2W~-B+J%ZHxQK2k4?Umi{dWK[GK_mG&(el!^AR,YT-X9P-m(9%C-l..z==Oh(RE,xmDS6=!lKz,O=&,deE`++iQ5VCXL[Y^Z?LB7r)u}k4n7=LtnTJwZA)eY8vfB@7vvdYD(a8ZU=qVm47sBI?iaZk6p!S]8?6D_x4Z7cJjqfl~xo!zh@7X%ORA?XADrzW?JWEfO9?9@$3t_Qr`{kPS!rsu19(OfCf'~0~Po4[nv@Xp]=P^LkdkaG14a99ww^FX2@Amv.^j+f3M*e)H?o6qr@fx9b'rGbrKH@FR8}kA.9^kv{98D@Qy?cq4uLo2o=_8G4&1&IqY(CeD&$F@G@MdV7cI5ewzftyD$`o_k=~X5yoL3!&A`NSB.WH!LA3(1Rmkk9?ethX(x,HWR9_OUZ=H!k3Xko]}oWUVJ@QG{ztU'eAplc=@70chp9&@F34p~'T)CfM[I(VWm9.a`6U-hvjpUZDg96]v?@_S7.CdN=Uj
MSI (s) (80:88) [11:29:10:908]: Executing op: ActionStart(Name=_StartNamedServices_CoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,,)
MSI (s) (80:88) [11:29:10:910]: Executing op: CustomActionSchedule(Action=_StartNamedServices_CoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3649,Source=BinaryData,Target=StartNamedServices,CustomActionData=HealthService System Center Management
APM)
MSI (s) (80:88) [11:29:10:913]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
MSI (s) (80:88) [11:29:10:918]: Executing op: CleanupConfigData()
MSI (s) (80:88) [11:29:10:918]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\5BA67A970AE3F4C4989BC10A4083CEE2\Patches 3: 2
MSI (s) (80:88) [11:29:10:918]: Executing op: RegisterPatchOrder(Continue=0,SequenceType=1,Remove=0)
MSI (s) (80:88) [11:29:10:918]: Note: 1: 1402 2: UNKNOWN\Products\5BA67A970AE3F4C4989BC10A4083CEE2\Patches 3: 2
MSI (s) (80:88) [11:29:10:923]: Executing op: ProductPublish(PackageKey={1B3B79AF-1391-4E6E-9BE2-2BD0832DADE7})
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:932]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2 3: 2
MSI (s) (80:88) [11:29:10:942]: Executing op: UpgradeCodePublish(UpgradeCode={4F70C213-6F45-4AA0-8994-1A09CBF27D77})
MSI (s) (80:88) [11:29:10:947]: Executing op: SourceListPublish(,,DiskPromptTemplate=Please Insert Disk 1,,NumberOfDisks=1)
MSI (s) (80:88) [11:29:10:947]: Note: 1: 1402 2: UNKNOWN\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList 3: 2
MSI (s) (80:88) [11:29:10:948]: Executing op: ProductPublishClient(,,)
MSI (s) (80:88) [11:29:10:949]: Executing op: SourceListRegisterLastUsed(SourceProduct={79A76AB5-3EA0-4C4F-89B9-1CA00438EC2E},LastUsedSource=E:\SCSM2012sp1\amd64\Setup\Server\)
MSI (s) (80:88) [11:29:10:949]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (80:88) [11:29:10:963]: Specifed source is already in a list.
MSI (s) (80:88) [11:29:10:963]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (80:88) [11:29:10:963]: Adding new sources is allowed.
MSI (s) (80:88) [11:29:10:963]: Set LastUsedSource to: E:\SCSM2012sp1\amd64\Setup\Server\.
MSI (s) (80:88) [11:29:10:963]: Set LastUsedType to: n.
MSI (s) (80:88) [11:29:10:963]: Set LastUsedIndex to: 1.
MSI (s) (80:88) [11:29:10:964]: Executing op: ActionStart(Name=_EnabledDiscoveryDataAuthorization,,)
MSI (s) (80:88) [11:29:10:979]: Executing op: CustomActionSchedule(Action=_EnabledDiscoveryDataAuthorization,ActionType=1537,Source=BinaryData,Target=EnabledDiscoveryDataAuthorization,)
MSI (s) (80:88) [11:29:11:086]: Executing op: ActionStart(Name=_RegisterVssExpressWriterSM,,)
MSI (s) (80:88) [11:29:11:104]: Executing op: CustomActionSchedule(Action=_RegisterVssExpressWriterSM,ActionType=1089,Source=BinaryData,Target=RegisterVssExpressWriterSM,CustomActionData=SCSMSMDBDOMAIN,DOMAIN|ServiceManager)
MSI (s) (80:EC) [11:29:11:173]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI36AB.tmp, Entrypoint: RegisterVssExpressWriterSM
CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSI36AB.tmp-\
CAPACK: CLR version v2.0.50727 is installed.
CAPACK: CLR version v2.0.50727 is detected.
CAPACK: CLR version v4.0.30319 is installed.
CAPACK: CLR version v4.0.30319 is detected.
CAPACK: Binding to CLR version v2.0.50727
Calling custom action CAManaged!Microsoft.MOMv3.Setup.VssWriterCAs.RegisterVssExpressWriterSM
RegisterVssExpressWriter: Registering VSS express writer.
MSI (s) (80:EC) [11:29:15:881]: NOTE: custom action _RegisterVssExpressWriterSM unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
MSI (s) (80:88) [11:29:15:884]: Executing op: ActionStart(Name=_Rollback_RegisterVssExpressWriterSM,,)
RegisterVssExpressWriter: Registered VSS express writer.
MSI (s) (80:88) [11:29:15:896]: Executing op: CustomActionSchedule(Action=_Rollback_RegisterVssExpressWriterSM,ActionType=1345,Source=BinaryData,Target=RemoveVssExpressWriterSM,)
MSI (s) (80:88) [11:29:15:975]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=639325328)
MSI (s) (80:88) [11:29:42:385]: An error occured while refreshing environment variables updated during the installation of ''. Some users logged on to the machine may not see these changes until they log off and then log back on.
MSI (s) (80:88) [11:29:42:445]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (80:88) [11:29:42:446]: User policy value 'DisableRollback' is 0
MSI (s) (80:88) [11:29:42:446]: Machine policy value 'DisableRollback' is 0
MSI (s) (80:88) [11:29:42:452]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (80:54) [11:29:42:890]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB293.tmp, Entrypoint: StopNamedServices
MSI (s) (80:BC) [11:29:43:709]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB40B.tmp, Entrypoint: ExecNetFx
MSI (s) (80:BC) [11:29:43:731]: Generating random cookie.
MSI (s) (80:BC) [11:29:44:395]: Created Custom Action Server with PID 4800 (0x12C0).
MSI (s) (80:F0) [11:29:45:368]: Running as a service.
MSI (s) (80:F8) [11:29:45:393]: Hello, I'm your 32bit Elevated custom action server.
MSI (s) (80:F0) [11:29:45:460]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIBCA7.tmp, Entrypoint: ExecNetFx
MSI (s) (80:F4) [11:29:45:593]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIBCF6.tmp, Entrypoint: ExecNetFx
MSI (s) (80:EC) [11:29:45:662]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIBD83.tmp, Entrypoint: ExecNetFx
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.ConsoleFramework.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.Foundation.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.Controls.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.ViewFramework.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.WpfViews.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\Microsoft.EnterpriseManagement.UI.ExtendedControls.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\CommunicatorAPIInterop.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "E:\Program Files\Microsoft System Center 2012\Service Manager\CommunicatorPrivateInterop.dll" /queue:1
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe install "Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /queue:2
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
ExecNetFx: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ngen.exe update /queue
ExecNetFx: Microsoft (R) CLR Native Image Generator - Version 4.0.30319.33440
ExecNetFx: Copyright (c) Microsoft Corporation. All rights reserved.
MSI (s) (80:9C) [11:29:50:885]: Invoking remote custom action. DLL: C:\Windows\Installer\MSID199.tmp, Entrypoint: ConfigureSDKConfigService
ConfigureSDKConfigService: Custom action data property value. 1 OMCFG
ConfigureSDKConfigService: RHS so start services. 1
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
ConfigureSDKConfigService: CAStartServices succeeded!. OMCFG
MSI (s) (80:F4) [11:30:01:168]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIF733.tmp, Entrypoint: ConfigureSDKConfigService
ConfigureSDKConfigService: Custom action data property value. 1 OMSDK
ConfigureSDKConfigService: RHS so start services. 1
CAStartServices: CAStartServices was passed . OMSDK
CAStartServices: Attempting to start service. OMSDK
MSI (s) (80:A0) [11:30:04:965]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI82C.tmp, Entrypoint: WaitForSDKServiceStart
CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSI82C.tmp-\
CAPACK: CLR version v2.0.50727 is installed.
CAPACK: CLR version v2.0.50727 is detected.
CAPACK: CLR version v4.0.30319 is installed.
CAPACK: CLR version v4.0.30319 is detected.
CAPACK: Binding to CLR version v2.0.50727
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart
WaitForSDKServiceStart:Entering
WaitForSDKServiceStart: Error: The client has been disconnected from the server. Please call ManagementGroup.Reconnect() to reestablish the connection.,
Stack:    at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect(EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.EnterpriseManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, EnterpriseManagementGroupInternal internalsProxy)
   at Microsoft.EnterpriseManagement.EnterpriseManagementGroup.Connect(EnterpriseManagementConnectionSettings connectionSettings)
   at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart(Session session)
MSI (s) (80:A0) [11:30:36:809]: NOTE: custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (80:88) [11:30:37:805]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1156471542,LangId=0,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (80:88) [11:30:37:805]: Executing op: DialogInfo(Type=0,Argument=0)
MSI (s) (80:88) [11:30:37:806]: Executing op: DialogInfo(Type=1,Argument=Microsoft System Center 2012 - Service Manager)
MSI (s) (80:88) [11:30:37:807]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ea.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835eb.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ec.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ed.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ee.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ef.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f0.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f1.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f2.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f3.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f4.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f5.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f6.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f7.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f8.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835f9.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835fa.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835fb.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835fc.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835fd.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835fe.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\88835ff.rbf)
MSI (s) (80:88) [11:30:37:807]: Executing op: RegisterBackupFile(File=E:\Config.Msi\8883600.rbf)
MSI (s) (80:88) [11:30:40:009]: Executing op: ActionStart(Name=_Rollback_RegisterVssExpressWriterSM,,)
MSI (s) (80:88) [11:30:40:013]: Executing op: ProductInfo(ProductKey={79A76AB5-3EA0-4C4F-89B9-1CA00438EC2E},ProductName=Microsoft System Center 2012 - Service Manager,PackageName=SM.msi,Language=0,Version=117771097,Assignment=1,ObsoleteArg=0,ProductIcon=ServiceManager.ico,,PackageCode={1B3B79AF-1391-4E6E-9BE2-2BD0832DADE7},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (80:88) [11:30:40:029]: Executing op: CustomActionRollback(Action=_Rollback_RegisterVssExpressWriterSM,ActionType=1345,Source=BinaryData,Target=RemoveVssExpressWriterSM,)
MSI (s) (80:EC) [11:30:40:772]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI920E.tmp, Entrypoint: RemoveVssExpressWriterSM
CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSI920E.tmp-\
CAPACK: CLR version v2.0.50727 is installed.
CAPACK: CLR version v2.0.50727 is detected.
CAPACK: CLR version v4.0.30319 is installed.
CAPACK: CLR version v4.0.30319 is detected.
CAPACK: Binding to CLR version v2.0.50727
Calling custom action CAManaged!Microsoft.MOMv3.Setup.VssWriterCAs.RemoveVssExpressWriterSM
RemoveVssExpressWriter: Unregistering VSS express writer.
MSI (s) (80:EC) [11:30:43:808]: NOTE: custom action _Rollback_RegisterVssExpressWriterSM unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
RemoveVssExpressWriter: VSS express writer unregister succeeded.
MSI (s) (80:88) [11:30:43:834]: Executing op: ActionStart(Name=_RegisterVssExpressWriterSM,,)
MSI (s) (80:88) [11:30:43:853]: Executing op: ActionStart(Name=_EnabledDiscoveryDataAuthorization,,)
MSI (s) (80:88) [11:30:43:862]: Executing op: ActionStart(Name=PublishProduct,Description=Publishing product information,)
MSI (s) (80:88) [11:30:43:892]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Net,SecurityDescriptor=BinaryData,BinaryType=1,,)
MSI (s) (80:88) [11:30:43:898]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList,SecurityDescriptor=BinaryData,BinaryType=1,,)
MSI (s) (80:88) [11:30:43:910]: Executing op: RegRemoveValue(Name=LastUsedSource,Value=#%n;1;E:\SCSM2012sp1\amd64\Setup\Server\,)
MSI (s) (80:88) [11:30:43:916]: Executing op: RegCreateKey()
MSI (s) (80:88) [11:30:43:925]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2,SecurityDescriptor=BinaryData,BinaryType=1,,)
MSI (s) (80:88) [11:30:43:930]: Executing op: RegRemoveValue(Name=Clients,Value=[~]:,)
MSI (s) (80:88) [11:30:43:937]: Executing op: RegCreateKey()
MSI (s) (80:88) [11:30:43:944]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Media,SecurityDescriptor=BinaryData,BinaryType=1,,)
MSI (s) (80:88) [11:30:43:951]: Executing op: RegRemoveValue(Name=1,Value=;,)
MSI (s) (80:88) [11:30:43:959]: Executing op: RegCreateKey()
MSI (s) (80:88) [11:30:43:980]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Media,,BinaryType=1,,)
MSI (s) (80:88) [11:30:43:986]: Executing op: RegRemoveValue(Name=DiskPrompt,Value=Please Insert Disk 1,)
MSI (s) (80:88) [11:30:43:994]: Executing op: RegRemoveKey()
MSI (s) (80:88) [11:30:43:994]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Media 3: 2
MSI (s) (80:88) [11:30:43:999]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Net,,BinaryType=1,,)
MSI (s) (80:88) [11:30:44:005]: Executing op: RegRemoveValue(Name=1,Value=#%E:\SCSM2012sp1\amd64\Setup\Server\,)
MSI (s) (80:88) [11:30:44:011]: Executing op: RegRemoveKey()
MSI (s) (80:88) [11:30:44:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList\Net 3: 2
MSI (s) (80:88) [11:30:44:017]: Executing op: RegOpenKey(Root=-2147483646,Key=Software\Classes\Installer\Products\5BA67A970AE3F4C4989BC10A4083CEE2\SourceList,,BinaryType=1,,)

"Conversion to String failed" When attempting to call rs.getString()

Hello All,
I'm getting a "Conversion to String failed" exception being thrown from oracle jdbc when I attempting to call the rs.getString(1) method on a column type of DATE.
During investigations we've found the following:
1. The query is fine, and is performing a "select * from table".
2. I see this problem when using 9i database (v 9.2.0.7) with 9i jdbc drivers (v9.2.0.7).
3. Strangely enough, if I use 10g jdbc drivers with the 9i database this problem goes away, and naturally I don't see this problem at all using a 10g driver working against a 10g database.
4. Grabbing the DATE value using the getDate() instead of getString() API works just fine in 9i.
5. The 9i rs.getString() API call will work with some date values in the database and not with others.
6. The data placed into the DATE column in question could have been placed there using different driver type from the 9i.
So, the 9i getString() API seems to be a problem.
At this point, based upon points 5 and 6 above, I'm thinking there is a bug in the oracle 9i jdbc drivers that is unable to convert DATE type data using the getString() API if the data was initially placed into the database using a different driver type. But, this would mean that the format of the data in the database would be different depending upon the means of getting the data there in the first place (which doesn't make much sense).
Here is the pertinent Stack Trace:
java.sql.SQLException: Conversion to String failed
at oracle.sql.Datum.stringValue(Datum.java:173)
at oracle.jdbc.driver.ScrollableResultSet.getString(ScrollableResultSet.java:684)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1549)
at com.revenuesolutionsinc.dali.sql.DALResultSet.getString(DALResultSet.java:325)
Any help on this matter would be greatly appreciated.
Thanks,
Doug Newcomb

Doug,
Pardon me for stating the obvious, but is there a
reason why you cannot use method "getDate()" instead
of method "getString()"?
For your information, you can report bugs via the
MetaLink
Web site.
Good Luck,
Avi.Thanks for the reply Avi,
The main reason is that we've got mountains of code that would need to be refactored. Also, the getString() method worked fine for over a year.
So we are looking towards finding out why this is happening before making the decision to refactor.
I will be placing a TAR with Oracle on Monday, but I thought I'd try to find out if anyone else has run into a similar problem.

Still getting "Software Update Failed" when attempting to download iOS 7 on iPhone 4S.

I've tried countless times now to download iOS 7 on my 4S which is currently running iOS 6.1.3. It downloads completely then in the "Preparing Update..." stage it gives me an error box saying "Software Update Failed. An error occurred downloading iOS 7.0." The same thing happens every time, I've rebooted and reset my pone several times as well as logging in an out of my Apple ID all with no success. It's not like it takes an unusual amount of time downloading or anything, and once it finishes downloading it shows less storage in the "About" section in "Settings" but goes back to where it was once it gives the error message. Just a note, I was able to download iOS 7 on my iPad 3 the day the software was released without a long waiting period or any hassle. I appreciate any input. Thank you.

Thanks for the response. I have 16.5 GB of available space at the moment. I've tried it connected to a wall charger and connected to my wifi, my schools wifi, and my gyms wifi all with no success. I have not tried it from iTunes but after posting this question a few suggestioned discussions came up, one of which recommended backing up to iCloud or iTune and then performing a complete restore. I'm in the process of doing that now, whether it works or doesn't work I will get back to either way. Thanks again.

Connection failed when attempting to connect to computer on network

It's always worked before. File sharing is enabled on both machines. I can see the computer on the network. I've repaired permissions, and rebooted both machines. But the connection times out with the following message.
Connection failed
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Any help, ideas, suggestions are appreciated.

You might see if these are helpful:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
Mac OS X 10.4 Tiger- 'Connection failed' error when connecting to an AFP server

NetInstall & NetRestore fail when attempting to connect/install.

I'm trying to get a 10.6.4 server to host NetInstall & NetRestore images to build workstations on in classrooms. We've created a NetInstall from a base OS X 10.6 install DVD. Additionally, we've created a NetRestore image from a 'Golden Master' workstation that we want to roll out.
We're able to boot the workstations under a current 10.6 configuration, when we go to set the Startup Disk, we see both the NetRestore and NetInstall options. When we select one and restart, the workstation gives the flashing world icon for a minute or two, then boots into the OS on the system. The same result occours when using a boot DVD.
On the server side, the log shows that we have contact from the MAC address of the workstation we're working with, but for some reason neither the NetInstall nor the NetRestore will "catch" and proceed with installation.
Is there something I'm obviously missing?
Thanks in advance!

I cloned 300 Macs using NetInstall images on my school's 10.5 server, then upgraded to 10.6 and now can't use any NetBoot functions. I've been using Mike Bombich's excellent troubleshooting guide and have gotten to the point that it seems port 69 for tftp is not open (though on the local Mac's startup preferences it can see the netinstall image). The permissions for the images are appropriate, and since NetBoot services worked on the router/switch infrastructure 2 weeks ago, I am assuming the config problems aren't router-based. But when I go into the Firewall and enable tftp port 69 (and others), it makes no difference. When I trace tftp from a client it says no such service, port scan on server IP shows 69 port not open. How do I open a port on the server in terminal mode? How do I flush the NetBoot cache in terminal mode?
Or do I just reinstall 10.5 server?

Makepkg fails when attempting patch addition 2.6.15-ck1

The PKGBUILD for this activity:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++# $Id: PKGBUILD,v 1.77 2005/12/27 14:47:51 tpowa Exp $
# Maintainer: judd <[email protected]>
pkgname=kernel26
basekernel=2.6.14
pkgver=2.6.14.5
pkgrel=1
pkgdesc="The Linux Kernel and modules (IDE support)"
url="http://www.kernel.org"
backup=('boot/kconfig26')
makedepends=('mkinitrd>=1.01-21')
depends=('module-init-tools' 'mkinitrd>=1.01-21')
# ieee80211 and hostap-driver26 modules are included in kernel26 now
replaces=('kernel26-scsi' 'ieee80211' 'hostap-driver26')
install=kernel26.install
source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$basekernel.tar.bz2
http://www.kernel.org/pub/linux/kernel/ … pkgver.bz2
config logo_linux_clut224.ppm
#ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/$basekernel/acpi-20050902-$basekernel.diff.bz2
http://iphitus.loudas.com/arch/ck/2.6.1 … rchck7.bz2
build() {
cd $startdir/src/linux-$basekernel
patch -Np1 -i ../patch-$pkgver || return 1
patch -Np1 -i ../patch-2.6.14-archck7 || return 1 #patch -Np1 -i ../acpi-20050902-$basekernel.diff || return 1
# remove the extraversion from Makefile
sed -i 's|^EXTRAVERSION = .*$|EXTRAVERSION =|g' Makefile
# Arch logo!
cp ../logo_linux_clut224.ppm drivers/video/logo/
# get rid of the 'i' in i686
carch=`echo $CARCH | sed 's|i||'`
cat ../config | sed "s|#CARCH#|$carch|g" >./.config
# build the full kernel version to use in pathnames
. ./.config
_kernver="${basekernel}${CONFIG_LOCALVERSION}"
# load configuration
yes "" | make config
# build!
make bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
cp System.map $startdir/pkg/boot/System.map26
cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26
install -D -m644 Makefile
$startdir/pkg/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile
$startdir/pkg/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config
$startdir/pkg/usr/src/linux-${_kernver}/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/include
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/arch/i386/kernel
for i in acpi asm-generic asm-i386 config linux math-emu media net pcmcia scsi sound video; do
cp -a include/$i $startdir/pkg/usr/src/linux-${_kernver}/include/
done
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers $startdir/pkg/usr/src/linux-${_kernver}
cp -a scripts $startdir/pkg/usr/src/linux-${_kernver}
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/.tmp_versions
cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernver}/arch/i386/
cp arch/i386/kernel/asm-offsets.s
$startdir/pkg/usr/src/linux-${_kernver}/arch/i386/kernel/
# add headers for lirc package
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video/
# add inotify.h
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h $startdir/pkg/usr/src/linux-${_kernver}/include/linux/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-${_kernver}/$i
done
cd $startdir/pkg/usr/src/linux-${_kernver}/include && ln -s asm-i386 asm
chown -R root.root $startdir/pkg/usr/src/linux-${_kernver}
cd $startdir/pkg/lib/modules/${_kernver} &&
(rm -f source build; ln -sf ../../../usr/src/linux-${_kernver} build)
# Now generate a fallback init ramdisk
# NOTE: This backup ramdisk will not work for cryptsetup/raid users, since
# we don't have their unique configuration at build-time!
touch $startdir/pkg/boot/initrd26-full.img
/sbin/mkinitrd --skip-config --root-dir=$startdir/pkg full || return 1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Aborts at ...include/linux ppp-comp.h
Basic kernel26 pkgbuild modified to include additional patch-2.6.14arch7.
What error have I made?

Tomk;
Ran this PKGBUILD and downloaded the kernel tar OK in eight minutes.
Build failed to download the patch-2.6.15-ck1.bz2.
Have I made a bad reference to that patch?
===========================================================
Code:
# Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
pkgname=kernel26
pkgver=2.6.15
_ck=ck1
pkgrel=1
pkgdesc="The Linux Kernel 2.6.15 and modules (IDE support) compiled with -cks1 patchset"
url="http://www.kernel.org"
depends=('module-init-tools')
install=kernel26.install
##### add any patch sources to this section
source=(config ftp://ftp.ie.kernel.org/pub/linux/kerne … er.tar.bz2
http://ck.kolivas.org/patches/ck1/patch … -$_ck.bz2)
# Function to grab var from src
getvar() {
old=$(cat Makefile | grep "^$1")
echo $(echo ${old/"$1 ="/} | sed -e "s/[ ]*(.*)[ ]*/1/g")
return 0
build() {
cd $startdir/src/linux-$pkgver
##### Uncomment and apply any patches here
patch -Np1 -i ../patch-$pkgver-$_ck || return 1
# get rid of the 'i' in i686
carch=`echo $CARCH | sed 's|i||'`
cat ../config | sed "s|#CARCH#|$carch|g" >./.config
# Update LOCALVERSION based on hostname/date
_locver=.`echo $HOSTNAME | cut -d "-" -f 2`.`date +%Y%m%d`
. ./.config
sed -i -e "s:$CONFIG_LOCALVERSION:$_locver:g" .config
##### Load config - uncomment your preferred config method
#yes "" | make config
make oldconfig || return 1
#make menuconfig
make xconfig
#make gconfig
##### NO USER CHANGES BELOW HERE #####
# save the current pkgname
old_pkgname=$pkgname
# set pkgname for build purposes - DO NOT alter!
pkgname=kernel26
# save the updated config to build with today's date
cp ./.config $startdir/config-$(date +%b%d-%Hh)
# get EXTRAVERSION from Makefile to create a unique pkgname and /usr/src directory
_kernextra=$(getvar "EXTRAVERSION")
# grab the 2.6.x.y version suffix from pkgver
_y="`echo $pkgver | cut --delim "." --fields 4`"
# remove .y version suffix from _kernextra
_kernextra="`echo $_kernextra | sed "s|.$_y||g"`"
# Read the full kernel version info from new config to use in pathnames and pkgname
. ./.config
# Kernel custom - to create a unique pkgname (see below)
_kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
# Kernel release - will be the same as Makefile
_kernrel="${pkgver}${_kerncust}"
# Get the pkgver suffix for unique pkgname and /boot file suffices
_pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`
# Set /boot file suffices from kernel release and pkgver suffix
_kernboot="${_pkgversuf}${_kerncust}"
# Set a new pkgname from kernel release and pkgver suffix
pkgname="${pkgname}${_pkgversuf}${_kerncust}"
# build!
make clean bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
cp System.map $startdir/pkg/boot/System.map26${_kernboot}
cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
install -D -m644 Makefile
$startdir/pkg/usr/src/linux-${_kernrel}/Makefile
install -D -m644 .config
$startdir/pkg/usr/src/linux-${_kernrel}/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
for i in acpi asm-generic asm-i386 config linux math-emu media net pcmcia scsi sound video; do
cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
done
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers $startdir/pkg/usr/src/linux-${_kernrel}
cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
cp arch/i386/kernel/asm-offsets.s
$startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
done
cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
cd $startdir/pkg/lib/modules/${_kernrel} &&
(rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)
# Read the full kernel version info from new config to use in pathnames and pkgname
. ./.config
# Kernel custom - to create a unique pkgname (see below)
_kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
# Kernel release - will be the same as Makefile
_kernrel="${pkgver}${_kerncust}"
# Get the pkgver suffix for unique pkgname and /boot file suffices
_pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`"
# Set /boot file suffices from kernel release and pkgver suffix
_kernboot="${_pkgversuf}${_kerncust}"
# Set a new pkgname from kernel release and pkgver suffix
pkgname="${pkgname}${_pkgversuf}${_kerncust}"
# build!
make clean bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
cp System.map $startdir/pkg/boot/System.map26${_kernboot}
cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
install -D -m644 Makefile
$startdir/pkg/usr/src/linux-${_kernrel}/Makefile
install -D -m644 .config
$startdir/pkg/usr/src/linux-${_kernrel}/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
for i in acpi asm-generic asm-i386 config linux math-emu media net pcmcia scsi sound video; do
cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
done
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers $startdir/pkg/usr/src/linux-${_kernrel}
cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
cp arch/i386/kernel/asm-offsets.s
$startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
done
cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
cd $startdir/pkg/lib/modules/${_kernrel} &&
(rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)
# Correct the pkgname in our PKGBUILD - this allows correct gensync operation
# NOTE: pkgname variable must be declared with first 10 lines of PKGBUILD!
cd $startdir
sed -i "1,11 s|pkgname=$old_pkgname|pkgname=$pkgname|" ./PKGBUILD
=========================================================
I didn't change the description I notice!

Server always fails when attempting to set up e-mail

Carrier: O2 UK
Model Info: BlackBerry 9320 (3G, Wi-Fi)
OS Version: Version 7.1 Bundle 2301
Battery pull did not solve issue
I attempted to set up e-mail, but my device had a problem connecting to the server.
BlackBerry World is not downloading, so I can't show you any screenshots

Do you have a BlackBerry data plan?
If so, try going to www.blackberry.com/integrate
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

IMP Fails when using multi-file export

IMP-00051: Direct path exported dump file contains illegal column length
IMP-00008: unrecognized statement in the export file:
I exported to two 2.0 gig files on linux 816 then simply copied them to another 816 server and attemped to import, it seems the export either does not work or the import does not read the new information and an Oracle fix is required.
Does anybody know where I can get one?

Hi,
Though it is late, its better then never.
I had the same problem, but with a much smaller dump. In the end, I had to let Oracle specialists repair the file, since the server had crashed.
Now I am looking into it, to see if we can import exported files, and I ran into the same problem. But it seems to be parameter related, because without the direct=y parameter, it works correctly. Could it be you had the direct=y also ?
Good luck,
Elmar
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by brian engelhardt ([email protected] ):
IMP-00051: Direct path exported dump file contains illegal column length
IMP-00008: unrecognized statement in the export file:
I exported to two 2.0 gig files on linux 816 then simply copied them to another 816 server and attemped to import, it seems the export either does not work or the import does not read the new information and an Oracle fix is required.
Does anybody know where I can get one?<HR></BLOCKQUOTE>
null

Authorisation fail when attempting to play specific LP

Every time I try to play a particular albulm Im asked to auth. But then Im told (righlty) that this computer is already authorised. The LP doesnt then begin to play.
Any ideas...?

0x12e6000 - 0x12f4fe3 +com.scriptsoftware.ChatFX (1.0 - 1.21) /Library/InputManagers/*/ChatFX.bundle/Contents/MacOS/ChatFX
0x1339000 - 0x1339ffc +com.growl.GrowlSafariLoader (1.1.5 - 1.1.5) <3A90BB91-AB09-4B20-6529-2BCC579B2987> /Library/InputManagers/*/GrowlSafariLoader.bundle/Contents/MacOS/GrowlSafariLoa der
0x133e000 - 0x133fffd +com.machangout.Glims (??? - 1.0) <066E6F72-F5C3-9CF8-3763-369078FC5AD7> /Library/InputManagers/*/Glims.bundle/Contents/MacOS/Glims
0x1344000 - 0x134dfff +net.sourceforge.SafariAdBlock (0.3.2 - 0.3.2) <83D3F111-F660-BE38-66FF-42427E0BD1C9> /Library/InputManagers/*/Safari AdBlock.bundle/Contents/MacOS/Safari AdBlock
0x135a000 - 0x1397fe3 +com.zang.RegexKit (0.6.0 - 0.6.0) /Library/InputManagers/*/Safari AdBlock.bundle/Contents/Frameworks/RegexKit.framework/Versions/A/RegexKit
0x13ab000 - 0x13acfff +com.ecamm.pluginloader (Ecamm Plugin Loader v1.0.5 - 1.0.5) /Library/InputManagers/*/Ecamm Plugin Loader.bundle/Contents/MacOS/Ecamm Plugin Loader
Try removing all of the third party Safari add-ons first.

"Join Failed" When Attempting Multi-way Text Chat

Similar Messages

Maybe you are looking for