Join on two tables using "LIKE"

Hi all,
I need make join on two tables (QMEL and STXL) using keys for connection:
- field for join of first table is (QMEL-QMNUM - Notif. number - Char 12)
- field for join of second table is (STXL-TDNAME - Char 70)
If it is connection based on EQ, I think, it's no problem but I need to connect it on base of 'LIKE'.
Example:
QMEL-QMNUM = '100100698075'
I would like get all rows from STXL which contain or even better start with notif. number.
Examples I would like connect with QMEL-QMNUM:
STXL-TDNAME = '100100698075'
STXL-TDNAME = '1001006980750001'
STXL-TDNAME = '10010069807500010001'
STXL-TDNAME = '10010069807500010002'
etc..
Am I able to manage that with select which join these two tables this way?
Thanks for any solution
Vaclav Hosek.

Hi,
Write 2 separate selects for this.
select * from QMEL
where......
if sy-subrc = 0.
loop at i_qmel into wa.
r_tdname-option = 'CP'.
r_tdname-sign = 'I'
concatenate wa-qnum '*' into r_tdname-low.
append r_tdname.
endloop.
select *
from STL
where tdname in r_tdname.
endif.

Similar Messages

Subject: How to do join between two tables using something like SE16

SE16, SE11 provide form based interface query information from a single table. Is there a way to do join between two tables without creating an infoset erc? I am looking for something similar to sql join but in SAP BI 7.0
Thanks.

Hi
Pls look into below links. Hope this helps you.
1. http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb45bf455611d189710000e8322d00/content.htm
2. http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb45a5455611d189710000e8322d00/content.htm
Regards
Sirigiri

Join this two table HELP

Hi to all.. i have this two table , the problem is i dunno how to join this two table into one, becoz in the forms i have two button "BUTTON A IS FOR TABLE A WHICH IS THE EMPLOYEE.. AND BUTTON B IS FOR ADMIN... WHAT I WANT IS TO MAKE THIS TWO BUTTON INTO ONE BUTTON.. i;m using form6i and run in client server..
Guys any one here know plz help how to do this..
TABLE 1
BEGIN
iF :username IS NULL THEN
MESSAGE ('Please enter Username ');
MESSAGE ('Please enter Username ');
GO_ITEM('username');
RAISE FORM_TRIGGER_FAILURE;
end if;
IF :PASSNAME1 IS NULL THEN
MESSAGE('Please enter password.');
MESSAGE('Please enter password.');
GO_ITEM('PASSNAME1');
RAISE FORM_TRIGGER_FAILURE;
end if;
select username,passname
into :pass.username,:pass.passname1
from Employees
where :pass.username=username
and :pass.passname1=passname;
Message('Access Granted');
Message('Access Granted');
go_block('maina');
hide_view('pass1');
exception
when no_Data_found then
set_alert_Property('wrong',Alert_Message_text,'Invalid Password');
if show_alert('wrong')=alert_button1 then
          go_item('PASSNAME1');
          :passname1:=null;
          end if;
end;
TABLE 2
BEGIN
iF :username IS NULL THEN
MESSAGE ('Please enter Username ');
MESSAGE ('Please enter Username ');
GO_ITEM('username');
RAISE FORM_TRIGGER_FAILURE;
end if;
IF :PASSNAME1 IS NULL THEN
MESSAGE('Please enter password.');
MESSAGE('Please enter password.');
GO_ITEM('PASSNAME1');
RAISE FORM_TRIGGER_FAILURE;
end if;
select username,passname
into :pass.username,:pass.passname1
from Admin1
where :pass.username=username
and :pass.passname1=passname;
Message('Access Granted');
Message('Access Granted');
go_block('maina');
hide_view('pass1');
exception
when no_Data_found then
set_alert_Property('wrong',Alert_Message_text,'Invalid Password');
if show_alert('wrong')=alert_button1 then
          go_item('PASSNAME1');
          :passname1:=null;
          end if;
end;

like i told you before in this posting How to join this two tables
use a union
select username,passname
into :pass.username,:pass.passname1
from Employees
where :pass.username=username
and :pass.passname1=passname
union
select username,passname
into :pass.username,:pass.passname1
from Admin1
where :pass.username=username
and :pass.passname1=passname;

Need help to join two tables using three joins, one of which is a (between) date range.

I am trying to develop a query in MS Access 2010 to join two tables using three joins, one of which is a (between) date range. The tables are contained in Access. The reason
the tables are contained in access because they are imported from different ODBC warehouses and the data is formatted for uniformity. I believe this cannot be developed using MS Visual Query Designer. I think writing a query in SQL would be suiting this project.
ABCPART links to XYZPART. ABCSERIAL links to XYZSERIAL. ABCDATE links to (between) XYZDATE1 and ZYZDATE2.
[ABCTABLE]
ABCORDER
ABCPART
ABCSERIAL
ABCDATE
[ZYXTABLE]
XYZORDER
XYZPART
XYZSERIAL
XYZDATE1
XYZDATE2

Thank you for the looking at the post. The actual table names are rather ambiguous. I renamed them so it would make more sense. I will explain more and give the actual names. What I do not have is the actual data in the table. That is something I don't have
on this computer. There are no "Null" fields in either of the tables.
This table has many orders (MSORDER) that need to match one order (GLORDER) in GLORDR. This is based on MSPART joined to GLPART, MSSERIAL joined to GLSERIAL, and MSOPNDATE joined if it falls between GLSTARTDATE and GLENDDATE.
[MSORDR]
MSORDER
MSPART
MSSERIAL
MSOPNDATE
11111111
4444444
55555
2/4/2015
22222222
6666666
11111
1/6/2015
33333333
6666666
11111
3/5/2015
This table has one order for every part number and every serial number.
[GLORDR]
GLORDER
GLPART
GLSERIAL
GLSTARTDATE
GLENDDATE
ABC11111
444444
55555
1/2/2015
4/4/2015
ABC22222
666666
11111
1/5/2015
4/10/2015
AAA11111
555555
22222
3/2/2015
4/10/2015
Post Query table
GLORDER
MSORDER
GLSTARTDATE
GLENDDATE
MSOPNDATE
ABC11111
11111111
1/2/2015
4/4/2015
2/4/2015
ABC22222
22222222
1/5/2015
4/10/2015
1/6/2015
ABC22222
33333333
1/5/2015
4/10/2015
3/5/2015
This is the SQL minus the between date join.
SELECT GLORDR.GLORDER, MSORDR.MSORDER, GLORDR.GLSTARTDATE, GLORDR.GLENDDATE, MSORDR.MSOPNDATE
FROM GLORDR INNER JOIN MSORDR ON (GLORDR.GLSERIAL = MSORDR.MSSERIAL) AND (GLORDR.GLPART = MSORDR.MSPART);

How to Join two tables using the Inner Join

Hi All,
I have two tables i.e table1 and table2 as i have created two otds and my present requirement is to join this two tables and get the results and using this i need to do some logic and update another table3.
can some one help me out how to go for the above req.
Thanks in Advance
Srikanth

The best efficient way to use inner join is create two input otds,use there otd's in create a collaboration usinf etl.
after selecting two input otd's create a inner join statement and map it to out put otd.
while using the etl the performance of the over all integration is increased 20 time of the normal integration.
Hopes this will helps,,
Thanks,
Papa Rao.

Sql join on two tables where column like another column

hi all,
been trying to get the results from a join between two tables where one column is like another one.
table1 (nameA) examples: black2, green1
table2 (nameB) example: black2.location.uk.com, green1.location.uk.com
so for example I want to match all those in table1 with black2 to the column in table2 that begins with black2 and so on if you see what im trying to get at!
my sql so far:
select * from schema.table1 a
join schema.table2 b
on a.nameA like concat('%', b.nameB, '%'); but it errors:
ORA-00909: invalid number of arguments
00909. 00000 - "invalid number of arguments"
Any help or advice would be greatly appreciated, thankyou!

Either of these should do it...
select * from schema.table1 a
join schema.table2 b on a.nameA like '%'||b.nameB||'%';or
select * from schema.table1 a
join schema.table2 b on instr(b.nameB,a.nameA) > 0

Prcedure to joining of two tables and pls explore the primary & foriegn key

Dear All,
Am new to this forum looking forward to have some discussions and guidance reg ABAP.
<b>My query is</b>
what is the prcedure to joining of two tables and pls explore the primary & foriegn key relationships.
Your kind help is required in this query .
Thanks n regards
Carol P

Hi Carol,
Joining two tables fetch data from tables that has relevent entry based on the keys. like LIKP and LIPS these are delivery tables. if the business requirement is fetching delivery data that are exists in both two tables. here LIKP will conatins a single entry against a condition and LIPS may contains several entry because one delivery may has multiple line items. so, fetch the data joining the two tables on vbeln that is delivrey number. this is used to increase the performance of the program except for all entries.
Foreign key is poiting twowards primary key; it may be 1:1 , 1:many and many:many. if field1 of table a is pointing towards field1 of table b. then based on these condition at the time of entry SAP will check how many entry can be entred in field1 of table a.
regards
Krishnendu

Can we implement the custom sql query in CR for joining the two tables

Hi All,
Is there anyway to implement the custom sql query in CR for joining the two tables?
My requirement here is I need to write sql logics for joining the two tables...
Thanks,
Gana

In the Database Expert, expand the Create New Connection folder and browse the subfolders to locate your data source.
Log on to your data source if necessary.
Under your data source, double-click the Add Command node.
In the Add Command to Report dialog box, enter an appropriate query/command for the data source you have opened.
For example:
SELECT
    Customer.`Customer ID`,
    Customer.`Customer Name`,
    Customer.`Last Year's Sales`,
    Customer.`Region`,
    Customer.`Country`,
    Orders.`Order Amount`,
    Orders.`Customer ID`,
    Orders.`Order Date`
FROM
    Customer Customer INNER JOIN Orders Orders ON
        Customer.`Customer ID` = Orders.`Customer ID`
WHERE
    (Customer.`Country` = 'USA' OR
    Customer.`Country` = 'Canada') AND
    Customer.`Last Year's Sales` < 10000.
ORDER BY
    Customer.`Country` ASC,
    Customer.`Region` ASC
Note: The use of double or single quotes (and other SQL syntax) is determined by the database driver used by your report. You must, however, manually add the quotes and other elements of the syntax as you create the command.
Optionally, you can create a parameter for your command by clicking Create and entering information in the Command Parameter dialog box.
For more information about creating parameters, see To create a parameter for a command object.
Click OK.
You are returned to the Report Designer. In the Field Explorer, under Database Fields, a Command table appears listing the database fields you specified.
Note:
To construct the virtual table from your Command, the command must be executed once. If the command has parameters, you will be prompted to enter values for each one.
By default, your command is called Command. You can change its alias by selecting it and pressing F2.

How we relate two tables using foreign key(fk)?

hi to all,
what are the conditions has to follow to relate two tables.I.e.,
the two tables have same primary keys(pk). if we relate these two tables in one table the pk and fk will be the same then how that table in active.

Hi
To relate two tables..we have foreign key relationship.
In one table v have primary key and in the second table, the same key is foreign key for that table..
To relate two tables, we can use JOINS
If there is already a suitable foreign key between two tables used in the view, these tables can be linked with a join condition from this foreign key.
Create a view on tables TAB1 and TAB2. TAB1 is the primary table of the view. TAB2 is the secondary table of the view. TAB1 is the check table for TAB2. The foreign key fields are assigned to the check table fields as follows:
TAB1-FIELD_A assigned to TAB2-FIELD_1
TAB1-FIELD_A assigned to TAB2-FIELD_1
The join condition of the view generated from the foreign key is then:
CREATE VIEW ... AS SELECT ... WHERE TAB2-FIELD_1 = TAB1-FIELD_A AND TAB2-FIELD_2 = TAB1-FIELD_B.
Join conditions can also be copied from generic and constant foreign keys. If a constant is assigned to a field in the foreign key, it is also assigned to the field in the join condition. There is no join condition for a generic relationship in the foreign key.
The foreign key between tables TAB1 (check table) and TAB2 (foreign key table) is defined as follows:
TAB1-FIELD_A assigned to TAB2-FIELD_1
TAB1-FIELD_B generic
TAB1-FIELD_C assigned to constant C
The join condition for the view generated from the foreign key is in this case:
CREATE VIEW ... AS SELECT ... WHERE TAB2-FIELD_1 = TAB1-FIELD_A AND TAB2-FIELD_2 = C.
Hope it helps
Reward if useful.

Operates on two table using procedure

i want to handle two table using procedure in oracle 10g. i have created a procedure like this
CREATE OR REPLACE PROCEDURE sold_car1(
sid soldcar.sold_id%TYPE,
cid soldcar.id%TYPE,
cuid soldcar.customer_id%TYPE,
eid soldcar.emp_id%TYPE,
d soldcar.dat%TYPE
) IS
BEGIN
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd'));
DELETE FROM pcar where id=cid;*
COMMIT;
END sold_car1;
SHOW ERRORS
i have found some errors. how can i do this.

hi
the errors are something like this ''the procedure is created with some errors''.
actually i want to pass 4 parameters in the procedure that will insert in one table and among the 4 parameters by using one parameter i want to delete one row of another table.
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd')); //soldcar is first table
DELETE * FROM pcar where id=cid; //pcar is second table

Join two table using two link field

hi all
i need to left join two table, and to link two table need to match two field
ex: the link field is store_name and id
i use below sql statement
SELECT A1.store_name, A1.id, A1.card, A2.sale, A2.history
FROM Georgraphy A1, Store_Information A2
WHERE A1.store_name = A2.store_name(+)
AND A1.id = A2.id(+)
but it's wrong
please tell me how to left join A1 and A2, thx!

Whats your aim?
Any error message?
SQL> select * from geography;
        ID STORE_NAME
         1 a
         1 b
         2 a
         2 b
SQL> select * from store_information;
        ID STORE_NAME
         1 a
         3 d
SQL> SELECT *
2 FROM Geography A1, Store_Information A2
3 WHERE A1.store_name = A2.store_name(+)
4 AND A1.id = A2.id(+);
        ID STORE_NAME         ID STORE_NAME
         1 a                   1 a
         2 a
         2 b
         1 b

Joining two tables using PL/SQL

here i am trying to join two tables can any one tell me what is wrong with this syntex
CREATE OR REPLACE PROCEDURE test IS
CURSOR c1 IS SELECT seq,fname,lname from t1;
CURSOR c2 IS SELECT seq1,q,a from t2;
userjob number;
BEGIN
     OPEN c1;
insert into t3 values(c1.seq,c1.fname,c1.lname);
     FETCH c1.seq INTO userjob;
FOR c1rec IN c2 LOOP
IF (c1rec.seq=c1.seq and c1rec.q1='why') THEN
insert into t3 values(c1rec.q1,c1rec.a1);
elsif (c1rec.seq=c1.seq and c1rec.q1='what') then
insert into t3 values(c1rec.q2,c1rec.a2);
elsif (c1rec.seq=c1.seq and c1rec.q1='when') then
insert into t3 values(c1rec.q3,c1rec.a3);
elsif (c1rec.seq=c1.seq and c1rec.q1='where') then
insert into t3 values(c1rec.q4,c1rec.a4);
     END IF;
     END LOOP;
     END;
/

You should always fetch a cursor before using it's values. All columns in the select should be fetched into variables or a record-variable. You can't refer to the cursor-columns values with c1.seq etc.
r1 c1%rowtype;
l_found boolean;
BEGIN
OPEN c1;
FETCH c1 INTO r1;
insert into t3 values(r1.seq,r1.fname,r1.lname);
l_found := c1%found;
close c1;
if l_found
then
It is also better to close the cursor and check if the select resulted in a row. With this code you will only retrieve one row even if the select will result in multiple rows.
But I agree with all the others that this can probably be done more efficiently with one SQL statement.

Unable to retrive data from two tables using multiple joins

Hi,
Table: EMP mgr
eid name
eid mgrid
1
A 1
null
2
B 2
3
3
C 3
3
i need to get result as:
eid ename mgrname
thanks
AVS

Sai,
It would be very helpful if you could mention your table structures a bit more clearly. Would allow for effective replies from fellow users as well. :)
However, assuming that your structure would be as follows presenting the query as below:
DECLARE @Emp TABLE(Eid Int, ename Varchar(50))
DECLARE @Emp_Mgr TABLE(Eid int, mgrid int null )
INSERT INTO @Emp select 1,'Ram'
INSERT INTO @Emp select 2,'Shyam'
INSERT INTO @Emp_Mgr select 1,NULL
INSERT INTO @Emp_Mgr select 2,1
SELECT * FROM @Emp
SELECT * FROM @Emp_Mgr
Query to print results as EID, ENAME, MGRNAME
SELECT em.eid,e1.ename as ENAME,e2.ename as MGRNAME
FROM @Emp_Mgr em
JOIN @Emp e1 ON em.eid=e1.eid
JOIN @Emp e2 ON em.mgrid=e2.eid
However, as you see this approach of maintaining two tables for preserving the employee-manager data is redundant and makes the queries unnecessarily complex. So, you could opt for the widely used single table format as mentioned by Praveen as well. Check
if this helps you..
Recommended Structure
*Avoidance of redundant storage of data
*Lesser Joins in queries
DECLARE @Emp TABLE(Eid Int , Ename Varchar(50) , mgrid int null )
INSERT INTO @Emp(Eid , ename , mgrid) values(1 , 'Ram' , null) , (2 , 'Shyam' , 1)
SELECT * FROM @Emp
Query to print results as EID, ENAME, MGRNAME
SELECT e.Eid , e.Ename , m.Ename as MgrName
FROM @Emp e
JOIN @Emp m On a.mgrid = b.eid
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Join two tables using union

Hi Gurus,
I have three tables. I want to join all tables using union in SQL statement. The query is returning all the records from both tables but i only require unique rows based on a specific column value. Here is my table structure -
TableA -
LIC_ID          NUMBER(10)     NOT NULL
LIC_NUMBER     VARCHAR2(20)
COMMENCE_DATE     DATE
EXPIRY_DATE     DATE
TERM          VARCHAR2(20)LIC_ID is the primary key in this table -
Sample data from TableA
LIC_ID          LIC_NUMBER     COMMENCE_DATE          EXPIRY_DATE     TERM
2          TR4323          12/04/2008          11/03/2010     2 Years
34          TR5432          23/07/2009          22/07/2010     1 Year
45          TR5321          24/06/2009          23/06/2010     1 Year
65          TR6666          23/07/2010          22/07/2011     1 Year
32          TR2423          30/05/2010          29/05/2011     1 YearTableB -
MAR_ID          NUMBER(10)     NOT NULL
LIC_ID          NUMBER(10)     NOT NULL
ZONE_NAME     VARCHAR2(20)
DEPARTMENT     VARCHAR2(20)
ACTIVITIES     VARCHAR2(200)
COMMENTS     VARCHAR2(200)MAR_ID is the primary key in this table and LIC_ID is the foreign key on TableA
Sample data from TableB -
MAR_ID          LIC_ID          ZONE_NAME     DEPARTMENT     ACTIVITIES     COMMENTS
23          2          ZONE A          IT          NONE
43          34          ZONE B          IT          NONE
33          65          ZONE C          ACCOUNT          NONE
          TableC
REC_ID          NUMBER(10)     NOT NULL
LIC_ID          NUMBER(10)     NOT NULL
DIST_NAME     VARCHAR2(20)
REGION          VARCHAR2(20)
ACTIVITIES     VARCHAR2(200)
COMMENTS     VARCHAR2(200)REC_ID is the primary key in this table and LIC_ID is the foreign key.
Sample data -
REC_ID          LIC_ID          DIST_NAME     REGION          ACTIVITIES     COMMENTS
2          45          SA          NORTH          NONE
3          65          TA          NORTH          NONE
5          32          NT          SOUTH          NONEHere is my sql query -
select a.lic_id, a.lic_number, a.commence_date, a.expiry_date from
TableA a, TableB b
where a.lic_id=b.lic_id
union
select a.lic_id, a.lic_number, a.commence_date, a.expiry_date from
TableA a, TableC c
where a.lic_id=c.lic_idThe above query returns -
lic_id          lic_number     commence_date          expiry_date
2          TR4323          12/04/2008          11/03/2010
34          TR5432          23/07/2009          22/07/2010
45          TR5321          24/06/2009          23/06/2010
65          TR6666          23/07/2010          22/07/2011
32          TR2423          30/05/2010          29/05/2011
65          TR6666          23/07/2010          22/07/2011     LIC_ID 65 exists in both table TableB and TableC hence it repeats in query but I want to display that only once. How can I do that? I want to return unique record on LIC_NUMBER.
Hope this make sence.
Many thanks,
Tajuddin

Thanks for all your reply and suggestions. David altering session did not work.
Sven your idea helped me to figure it out what to do. I found a way around to fix it. Here is my current code -
select a.lic_id, a.lic_number, a.commence_date, a.expiry_date from
TableA a, TableB b
where a.lic_id=b.lic_id
union
select a.lic_id, a.lic_number, a.commence_date, a.expiry_date from
TableA a, TableC c
where a.lic_id=c.lic_id and c.lic_id not in ( select lic_id from TableB)This will exclude any LIC_ID exists in TableB.
Thanks again for your help guys.
Regards,
M Tajuddin
Web: http://tajuddin.whitepagesbd.com
Blog: http://aspblog.whitepagesbd.com

Regarding logical joining of two table by using ODI interface

I have a two table in database.i have to logically add them, with the help of ODI interface.which should reflect in target.
there is a smple cinario regarding ,convertion of relational table to flat file.
but how to reflect mutiple table through joining in target from source.

Hi
Please correct my understan on your query
You want to say that, you have two tables at source side and want to store data to target table, later from target to flat file
or
You have two target table want to store data into flat file
Thanks
Phani

Join on two tables using "LIKE"

Similar Messages

Maybe you are looking for