Join our Webinar

We're having a webinar in about 50 minutes on GMS 2.1 - feel free to join in!
https://attendee.gotowebinar.com/reg...33185560625665
Danita
Novell Knowledge Partner
GroupWise Mobility Service 2.0 Guide - http://bit.ly/1cv13RE
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...
Are you a GroupWise Power Administrator? Join our site at
http://www.caledonia.net/register

Danita,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

"Please Enable Java" error when attempting to join GoToMeeting webinar in Firefox 4.

Since upgrading to Firefox 4 I'm unable to join GoToMeeting webinars, such as
https://www2.gotomeeting.com/join/298237491/106133365
I receive a "Please Enable Java" error, see this URL for an example: https://www2.gotomeeting.com/island/joinError?e=JavaDisabled
I double-checked and Java is enabled and updated to latest version. I also tested it on javatester.org with success.
These types of webinar still function appropriately in Firefox 3.6.

Thank you, nganju, for helping.
I did the Explorer search on *.jar files with this phrase in the file:
OracleConnectionPoolDataSource
There were no results to display. I searched both the computer which is working and one that doesn't.
I used printStackTrace() to get more error message. Is there a way to print the error msg to a file so I can paste it here? Among other things, it said the following:
com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12...
javax.naming.spi.NamingManager.getInitialContext(NamingManger...
Does any of this help you? I have no idea what to do next except call for help.
Help! : )

My wife's i-pad 3 was just downloaded with iOS6 and we're unable to join our wifi network at home. Can anyone help?

My wife's i-pad 3 was just downloaded with the latest iOS6 and she's now unable to join our wifi network at home. Can anyone help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

AIR-CAP3702I booting up in mesh mode and not joining our 5508 WLC

I have a batch of 30+ AIR-CAP3702I-A-K9 APs that I need to setup but none of them are joining to the 5508 WLC and when I connect a console cable and view the output from the AP it shows that it is trying to initiate in mesh mode. I have read other forums that are showing that I need to put in the APs MAC address to a filter list on the WLC for it to show up and then I will be able to change it from mesh mode to local mode. The only issue I'm having with that solution is not knowing how it will affect my current production environment off of that 5508 WLC. I have 69 active production APs with clients working off them and there are no MAC filters currently in place on the WLC. By adding a MAC filter entry for the new APs would the WLC create an implicit deny for all other clients that don't have their MAC addresses entered?? If so is there another work around? Can the mode be changed via the CLI on the AP itself to make it local instead of mesh?

sh capwap client rcb
AdminState : ADMIN_ENABLED
SwVer : 7.6.1.118
NumFilledSlots : 2
Name : AP88f0.4290.7184
Location : default location
MwarName : xxxxx
MwarApMgrIp : x.x.x.x !<it has the correct name and IP of the WLC>
MwarHwVer : 0.0.0.0
ApMode : Bridge
ApSubMode : Not Configured
OperationState : JOIN
CAPWAP Path MTU : 576
LinkAuditing : disabled
ApRole : MeshAP
ApBackhaul : 802.11a
ApBackhaulChannel : 0
ApBackhaulSlot : 2
ApBackhaul11gEnabled : 0
ApBackhaulTxRate : 24000
Ethernet Bridging State : 0
Public Safety State : disabled
AP Rogue Detection Mode : Enabled
AP Tcp Mss Adjust : Disabled
AP IPv6 TCP MSS Adjust : Disabled
Predownload Status : None
Auto Immune Status : Disabled
RA Guard Status : Disabled
Efficient Upgrade State : Disabled
Efficient Upgrade Role : None
TFTP Server : Disabled
Antenna Band Mode : Unknown
802.11bg(0) Radio
ADMIN State = ENABLE [1]
OPER State = DOWN [1]
CONFIG State = UP [2]
HW State = UP [4]
Radio Mode : Bridge
GPR Period : 0
Beacon Period : 0
DTIM Period : 0
World Mode : 1
VoceraFix : 0
Dfs peakdetect : 1
Fragmentation Threshold : 2346
Current Tx Power Level : 0
Current Channel : 11
Current Bandwidth : 20
802.11a(1) Radio
ADMIN State = ENABLE [1]
OPER State = DOWN [1]
CONFIG State = UP [2]
HW State = UP [4]
Radio Mode : Bridge
GPR Period : 0
Beacon Period : 0
DTIM Period : 0
World Mode : 1
VoceraFix : 0
Dfs peakdetect : 1
Fragmentation Threshold : 2346
Current Tx Power Level : 1
Current Channel : 165
Current Bandwidth : 20
It is showing the following error on our WLC in the log file:
Tue Jul 15 14:01:26 2014
AAA Authentication Failure for UserName:88f042907184 User Type: WLAN USER
And here are some of the errors it's showing on the AP after bootup:
*Jul 15 17:47:30.471: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
*Jul 15 17:47:31.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul 15 17:47:31.031: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:31.039: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jul 15 17:47:31.047: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 15 17:47:32.067: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:33.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul 15 17:47:35.471: %CAPWAP-5-SENDJOIN: sending Join Request to x.x.x.x
*Jul 15 17:47:35.471: %DTLS-5-ALERT: Received WARNING : Close notify alert from x.x.x.x
*Jul 15 17:47:35.475: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jul 15 17:47:35.483: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jul 15 17:47:36.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jul 15 17:47:36.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jul 15 17:47:37.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jul 15 17:48:15.007: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join timer expired
*Jul 15 17:48:15.007: %MESH-3-TIMER_EXPIRED: Mesh Lwapp join failed expired
*Jul 15 17:48:15.007: %MESH-6-LINK_UPDOWN: Mesh station 88f0.4290.7184 link Down
*Jul 15 17:48:17.007: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Jul 15 17:48:22.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Jul 15 17:59:10.099: %CAPWAP-3-ERRORLOG: Invalid event 31 & state 4 combination
*Jul 15 17:59:10.099: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 31, state 4

Record Separate Audio to our webinar, then use that in final - Sync Problem

Hi,
We do Gotowebinar Webinars and I have been recording the audio separately because the quality is much better.
Problem is when I drop it in to final cut, it doesn't stay in sync. I have tried the adjust the speed of the audio and can get it when it starts in sync and ends in sync, but the middle is all over the place.
Anybody got any ideas. I'm recording the audio on my mac coming right out of our mixing board.
The webinars are always an hour long.
Thanks
Rich

Run the audio out of the mixing board back to the camera.
I run 3 channels into the mixer and 2 out to the cam.
Channel 1 - lav mic on speaker
Channel 2 - short shotgun aimed at speaker (in case the lav fails and it also add nice depth)
Channel 3 - longer shotgun aimed at audience to pick up questions
Someone runs the board to adjust 2 & 3 as appropriate.
Channel 1 goes into the camera as Left
Channels 2 & 3 are mixed and go in as Right
Capture as dual mono. It's all in sync.
As an added twist - I'll run a lead out to a computer and capture live. If I have a hiccup, I can go back to the camera media. Otherwise I'm ready to edit the minute the talk is over.
x

AP not joining our vWLC

Hello,
We're currently using a new Virtual WLC and we have over 45 AP's connected to it without any issues. Recently, one of our AP's started having issues joining the controller and I'm not sure why not. On the controller it says...
Reason for last unsuccessful attempt: Layer 3 discovery request not received on management VLAN
On the AP itself, I get he following error messages. (Replaced the controller IP with X.X.X.X)
*Jun 16 20:44:43.113: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 16 20:44:43.113: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Jun 16 20:44:43.114: bsnInitRcbSlot: slot 1 has NO radio
*Jun 16 20:44:43.194: %PARSER-4-BADCFG: Unexpected end of configuration file.
*Jun 16 20:44:43.239: status of voice_diag_test from WLC is false
*Jun 16 20:44:53.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: X.X.X.X peer_port: 5246
*Jun 16 20:44:53.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Jun 16 20:44:53.023: %LWAPP-3-CLIENTERRORLOG: Peer certificate verification failed
*Jun 16 20:44:53.023: %CAPWAP-3-ERRORLOG: Certificate verification failed!
*Jun 16 20:44:53.024: DTLS_CLIENT_ERROR: ../capwap/capwap_wtp_dtls.c:352 Certificate verified failed!
*Jun 16 20:44:53.024: %DTLS-4-BAD_CERT: Certificate verification failed. Peer IP: X.X.X.X
*Jun 16 20:44:53.024: %DTLS-5-SEND_ALERT: Send FATAL : Bad certificate Alert to X.X.X.X:5246
*Jun 16 20:44:53.024: %DTLS-3-BAD_RECORD: Erroneous record received from X.X.X.X: Malformed Certificate
*Jun 16 20:44:53.025: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to X.X.X.X:5246
*Jun 16 20:44:53.025: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
I tried changing the AP time to match the WLC but that didn't work although I'll admit that I'm a little confused about UTC vs EST.
I also tried to reload but that didn't help.
I tried modifying the WLC "AP Policies" to "Accept Self Signed Certificate (SSC)" but that didn't work either
Any ideas? I won't be able to easily reset the AP since I will require a SkyJack to reach it so I'm looking for alternate options. I'm able to Telnet or SSH to the device so I can run whatever required commands.
Thanks.

I assume you have tried to factory reset the AP already, if not, try it. Also, try the following commands 'test capwap erase' 'test capwap restart'

Can't Join our 5GHz Network

Hello,
This morning my iPhone 5 could not join a home 5Ghz network. Previous to this morning there were no issues joining the network although it seemed to default to the 2.4GHZ network we have. We have an Airport Extreme Base station that is about four years old and it has a dual band radio. We therefore have a 2.4 and a 5.0 GHz network.
I believe the problem is in my iPhone because.
My wife's iPhone5, her iPad3, and my iPad 4 can join this network.
Running Airport utility from my iMac it reports "excellent" connections to the base station and four airport express devices.
I tried a reset of the iPhone by turning it off (swipe the red arrow). I also tried a hard reset (hold down the on/off button and the home button until the screen goes black). Neither of those resets helped.
The iPhone will readily join the 2.4 GHz network then continue to search for our other network. When it finds the 5GHz network and I choose it, I get a spinning gear and nothing happens. Occasionally it will ask for a password and sometimes it will report that it is unable to joinn the 5GHz network.
The iPhone is running IOS 6.1.3 as are our other devices. I recently added Apple's two factor authentication but can't imagine how that would interfere with the WiFi function.
Has anyone else experienced this problem? Your thoughts and advice are gratefully accepted.
Cheers,
Jay

What worked for me was a fix I found on a somewhat similar thread for the iPhone 4S. Settings>5GHz Network>Proxxy. I turned it from off to auto. The next time I tried to access this network it asked for my password but then connected. We'll see if this is a consistent fix.
Jay

SG300 Centralised Management

How would you manage, say, 50 SG300 switches? Assuming the whole network will consist of various sizes - 8/16/24/48-ports, with/without POE - but all of them are of the SG300 series.
Is there something like Cisco Prime which can manage (not just monitor) these switches centrally? I'm thinking:VLAN add/remove/change from all switchesVLAN port configuration, with uplink port verificationCentral SYSLOG collectionFirmware upgrade & verificationConfiguration backupsTemplate configuration management for Security services, Multicast configs, etc.
This topic first appeared in the Spiceworks Community

Date: 11 August, 11 am PT / 2 pm ETSpeakers:Ryan Brown,CEO, xByte TechnologiesMax Kolomyeytsev,Product Manager, StarWind SoftwareHyper-converged virtualization solution of a datacenter grade is now available for SMBs / ROBOs.StarWind Hyper-Converged Platformunifies servers, hypervisor and associated software into a single scalable layer, bringing in quick deployment and operational simplicity to virtualization workloads and reducing related expenses. It does not dependent on any vendor and does not require specific qualification of IT staff.Join our webinar to learn about an all-in-one scalable Hyper-Converged Platform, which includes pre-configured servers, hypervisor from Microsoft or VMware, environmental protection and doesn’t require any SAN or NAS.Register!Discuss it on ourForum!

Not receving Network Monitor alert emails

All,As the title states, I'm not receiving alert emails from the Spiceworks Network Monitor, however, I was as of 7/30/15. Here's what I've done so far:Uninstalled, rebooted, and reinstalled the Network Monitor.
Confirmed that my email settings are correct in SpiceworksSend a test email from Spiceworks (that I received successfully)Whitelisted the email address that the alerts come from in the spam filter (this had actually been done months ago)Checked the spam filter; nothing caught up in itWe do not host our own email server so I do not know if anything changed with it, however, I am and can still receive email from Spiceworks itself (Help Desk ticket creations / test emails / etc.) just fine.
At this point I'm out of ideas as to why this isn't working. I can't find anywhere in the Network Monitor program to send a test email and/or...

Date: 11 August, 11 am PT / 2 pm ETSpeakers:Ryan Brown,CEO, xByte TechnologiesMax Kolomyeytsev,Product Manager, StarWind SoftwareHyper-converged virtualization solution of a datacenter grade is now available for SMBs / ROBOs.StarWind Hyper-Converged Platformunifies servers, hypervisor and associated software into a single scalable layer, bringing in quick deployment and operational simplicity to virtualization workloads and reducing related expenses. It does not dependent on any vendor and does not require specific qualification of IT staff.Join our webinar to learn about an all-in-one scalable Hyper-Converged Platform, which includes pre-configured servers, hypervisor from Microsoft or VMware, environmental protection and doesn’t require any SAN or NAS.Register!Discuss it on ourForum!

Don't miss out on our exciting upcoming Partner webinars – Important Update

Thanks to all of you who have registered to our webinars so far.
We need to announce a last minute update regarding the webinar scheduled for this Wednesday, May 15th - Brendon O'Sullivan’s session on adding value to clients by upselling products & services had to be rescheduled.
The topic and presenter for this webinar session has been replaced with our experienced BC Partner Tim Gentle from Design Experts on Wed, May 15th for a business session, where you will learn how to Develop an Effective Sales Strategy for Your Web Agency.
Wed, May 15th: Developing an Effective Sales Strategy for Your Web Agency with Tim Gentle from Design Experts
Register for these sessions by clicking on the links below:
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
To make sure you can put your learning into practice, webinar participants will be receiving a 15% discount on their next website. (Some conditions for the coupon code apply*)
The series continues in June and July with presentations from two of our trusted Partners, Brett Stockley and Brent Weaver, who will teach you how to grow your business into the future. Registrations are now open for those instances as well, and we will be sending out a reminder as we move closer to the presentation dates.
Wed, June 12th: Online Marketing with Brett Stockley from PrettyPollution
Register for these sessions by clicking on the links below:
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
Wed, July 10th: Learn how BC Gurus leverages Web Apps to power their popular Business Catalyst community website with Brent Weaver from BC Gurus
Australian/EU session (17.00 EST / 09.00 CEST)
US/EU session (09.00 PDT / 18.00 CEST)
If you could not join us live, or would like to review some parts of the past webinars, you can click on the title and access the recording of past webinars here:
Dreamweaver & Business Catalyst integration - with Adam Broadway: http://my.adobeconnect.com/p9i3707tw4w/
Business Catalyst integration with Muse - with Daniele Beaumont and Chris Kellet: http://my.adobeconnect.com/p66zikge03g/
We would love to hear your feedback on this webinar series and as always suggestions are welcomed at [email protected]
*the 15% discount coupon applies for new site upgrades on any yearly/biyearly desired plan. Coupon validity: 31-Jul-2013, only available for the webinars’ attendees.
See you there!
The Adobe Business Catalyst Team

Hi ZypKode, I couldn't help but reply to your post: Back before Win 95 I was using Digigram's Xtrack audio editor. It didn't run on Win 3.x because that OS wasn't capable enough. Win 95 just managed that when it came out. I looked at Cool Edit Pro around that time, and it was Ok. But for my work which was a lot of interview recording/editing plus radio programme recording in 4 track (2 tracks for voicing, 1 stereo track for music) Xtrack was way out ahead, in terms of multitrack capability but especially speed of work. Even the waveform display had several options apart from the standard full-wave that every editor, even today uses (Audacity offers a dB display which is better, but nothing like the old Xtrack offering). The option I always used was a half-wave display with just the outline, and it was logarithmic rather than linear. Result was that, without resorting to zooming in and out, you could see the noise floor, see the detail of the person's breath and lip-smack. With a little experience you could do most voice edits just by looking without even listening – which, of course, you did afterward, just to make sure :-) Producers used to look at me as if I was a magician when doing the edits like that. If Audition one day offered that as a waveform option, they could put it forward as a revolutionary new experience, since Digigram, better known for their high end audio hardware, dropped Xtrack a few years ago, being too small a company to compete with the big players.

Join us today for a Novell Messeger Webinar

Caledonia will host a webinar today on Novell Messenger 3.0. Dirk Giles and
Mike Bills from Novell will be present to show you what's coming soon!
https://attendee.gotowebinar.com/reg...57637325024001
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Danita,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Join us today for a webinar on Novell Messenger

Caledonia will host a webinar today on Novell Messenger 3.0. Dirk Giles and
Mike Bills from Novell will be present to show you what's coming soon!
https://attendee.gotowebinar.com/reg...57637325024001
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Danita,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Webinar Invitation: Join us for "SiteStudio Best Practices"

<strong>SiteStudio Best Practices</strong>
Join us for a Webinar on November 13
Space is limited.
Reserve your Webinar seat now at:
https://www1.gotomeeting.com/register/789489722
Joe Duane is a senior principal product manager at Oracle, and former senior principal consultant. As a consultant, Joe spent 8 years architecting and deploying Web Content Management solutions for clients. This presentation will focus on best practice architecture and development with the 10gr3 release of Site Studio.
Title:
SiteStudio Best Practices
Date:
Thursday, November 13, 2008
Time:
12:00 PM - 1:00 PM CST
After registering you will receive a confirmation email containing information about joining the Webinar.
System Requirements
PC-based attendees
Required: Windows 2000, XP Home, XP Pro, 2003 Server, Vista
Macintosh-based attendees
Required: Mac OS X 10.4 (Tiger) or newer

Hi,
was there some kind of document formulated upon conclusion of this webinar? I was unable to attend, so I'm wondering if there is anything I can read on Best Practices for SS or any link to related information would be useful.
Thank you,
G

Participant cannot join webinar, receives "webinar has ended message" while the webinar is indeed in session.

A participant tried to join a webinar while it was still in session via the Event Login Link. They received a message "webinar has ended" (or something similar) when trying to join with the email address they registered with. The webinar was still in session, so I'm not sure what was going on?? Anyone else have this issue?

This happened to one of my users but they were using the wrong link. Is there any chance they would have had links to two different meetings and mistakenly used the wrong one?

Sign Up: BRM WEBINAR FOR APJ YASU QUICKRULES CUSTOMERS

SIGN UP FOR BUSINESS RULES MANAGEMENT WEBINAR FOR YASU QUICKRULES CUSTOMERS
WEBINAR DETAILS
Date:      Sept 29, 2009 (Tuesday)
When:      1.30pm SG | 3.30pm Sydney | 11am Mumbai
Agenda:
     u2022 What is SAP NetWeaver Business Rules Management all about?
     u2022 What advantages does a transition from YASU QuickRules to SAP NetWeaver BRM offer to your company?
     u2022 How can you get started with such a transition?
     u2022 Learn from other YASU QuickRules customers how SAP helps you with a smooth and cost-effective transition.
[View Invite on Your Browser|http://www28.sap.com/mk/get/APJ_09_YASUWEBCAST_SEPT_INV?_A=165359&_U=787694]
[Register Here|http://sap-webinars.com/bus_rule_mgmt/register.php]
SAP announced at the time of the YASU Technologies acquisition in 2007 its intention to leverage YASU's expertise in Business Rules Management, by embedding YASU's technology into SAP's product portfolio. SAP also announced that support for YASU solutions will be provided until end of 2009.
Our development efforts paid dividends, and it's our pleasure to announce the availability of SAP NetWeaver Business Rules Management, which combines both YASU's and SAP's expertise into a single comprehensive go-to-solution for central business rules management.
To address the specific needs of existing YASU QuickRules customers SAP provides a smooth and cost-effective transition to SAP NetWeaver BRM.
Join the webinar "Transition without disruption from YASU QuickRules to SAP NetWeaver Business Rules Management" to learn more about this dedicated offering for YASU QuickRules customers.
If you have any questions simply send an email to us.
[Register Here|http://sap-webinars.com/bus_rule_mgmt/register.php]

Join our Webinar

Similar Messages

Maybe you are looking for