Join-Smooth help please..

Hello .. as in the photo i'm tring do an cartoon bird
but that step more that 1 hour i'm searching for soulotion and nothings happen
please help me :
http://imgur.com/nCddOyb
Quickly plz

Ahmed,
There seems to be some discrepancy:
Aaccording to the Layers palette, the beak shape is a linked image with a horizontal colour transition corresponding to a gradient at the top of the stacking order, and the selected path is a horizontal wave shape.
The appearance on the Artboard seems to correspond to a path with the same beak shape and a solid fill where all Anchor Points but 2 with one sided Handles are Direct Selected.
Whatever is the case, if the selected path has 8 Anchor Points, it should be closed; if it has more it may be open. You may try to click each Anchor Point with the Direct Selection Tool and move it 1pt or something to the side and see whether there is another one staying in place beneath it; if there is, the path is open there and you should be able to close it, dragging over the set with the Direct Selection Tool and joining.

Similar Messages

  • Need help please, Join Tracks Greyed Out.

    Can someone please help with ther following information.
    When I want to burn an audiobook from CD into itunes and try to use the "join tracks" command from the advanced menu it is greyed out and can't be used.
    Can someone please tell me how to sort this out, plus as soon as I load i CD itune starts to import even though I have it set in preff not to do so.
    Again any help please to stop this happening.
    Many thanks

    *When I want to burn an audiobook from CD into itunes and try to use the "join tracks" command from the advanced menu it is greyed out and can't be used.*
    Are you highlighting the tracks you want to join before you go to Advanced>Join CD tracks? the function will be dimmed until a selection is made.
    *as soon as I load i CD itune starts to import even though I have it set in preff not to do so.*
    Open iTunes and go to Edit>Preferences>Advanced>Importing and change the setting in the drop down menu beside "On CD insert" from "Import CD" to one of the other settings such as "Show CD", "Begin Playing" or "Ask to Import CD"

  • Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

    Hi,
    Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
    both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
    thanks

    Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

  • I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    Thanks Eric for responding.
    I checked and it does not appear in the Applications folder.
    I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death). 
    One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
    I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
    The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
    Thanks again.

  • Hi, i am trying to smoothskin in photoshop cs6 and when i add a layer mask and try to use my paintbrush nothing apears to happen? help please

    Hi there, Im using photoshop cs6 and i have been trying to smooth skin. i have been duplicating the layer and choosing overlay in the blend drop down, then choosing filter, other, highpass, raduis of 9px then inverting the layer then i add a layer mask using alt and clicking the layer icon mask and then it tells me to use a soft brush to to paint over and revel the high pass layer but nothing is happening when i try to use the paint brush? can you help please? thanks Olivia 

  • Help please. How can you fade or crossfade songs on the actual iPod??

    Hi. I just got my nano today. Was prompted to download version 7, did it, and everything went smoothly. All songs transferred to my iPod, no problem. However, the cross fading did not transfer. However, given that I just downloaded version 7 I might not have set it to cross fade before downloading all my songs. Does this mean I have to delete all the songs and start over? I've tried connecting the iPod with the usb cable and setting the crossfade to 4 seconds but it doesn't translate to the iPod. Help please. I realllly love major fading. In other words i want NO silence between songs. Thanks !

    Oh wait, cross fading and gapless are different. So I can have gapless which I think I do have because the next song starts realllllly fast after the last one ends. So that is probably gapless but cross fading is not available on any models? Is that it? thanks alot

  • Help Please I can't find the TV show section to download.

    Hi, I'm new here and joined because I love the American TV show 'Supernatural', we are way behind in the UK and was told that iTunes store had the episodes yet to be seen in the UK but I can't find the tv section anywhere. I followed the help section which said to click on iStore, then tv shows from the genre list on the popup section but I didn't get a pop up list.
    Can anyone help please.
    Thanks

    The tv episode section is on the left hand side of the iTunes store and is in between the top movies and top music video's. Well that is how it is in the U.S, maybe iTunes doesn't have tv episodes available over there, or maybe they just don't have american shows.

  • 9800 Help Please

    Hi there, I am first of all new to the site and hope to stick around and get more used to it. However I would like some help please; 
    I recently changed phones from a Blackberry Curve to this Torch 9800. 
    I had both on o2, with an o2 registered sim card. 
    When I put my sim card into the Torch, It does the usual register and even sends me an email confirming my phone has been registered with Blackberry. 
    It then comes up in the corner showing GPRS with full signal .. But when I try to make a phonecall or even a text , Both incoming and outgoing, It says NO SERVICE CURRENTLY AVAILABLE. 
    I have tried battery reboots, I have tried an IMEI checker and the TORCH i have isn't registered as lost/stolen. The phone is 100% legal, Is there something I have done wrong, Or something I need to do? 
    Thanks in advance. 

    Hi and Welcome to the Community!
    It should be as easy as you have done. But, if it's not working, the place to seek help is from O2...after all, it's their network with which your BB is having trouble communicating. Perhaps they need to do something in their system, and only they have access to that.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Computer Crashed After Leopard Installation...Help, Please!

    So, I installed Leopard to my G5 and everything ran smoothly...But then when I restarted my computer and then it got to the blue screen before the computer loads and now it just stays there...All blue and nothing else...Nothing will happen and I have NO idea what went wrong...I need help, PLEASE!...Just, how do I re-install Tiger or get it to run again?...Thanks, Peace and Love!
    Message was edited by: xlunarsnake

    As the article stated
    Start up in single-user mode by holding Command-S after restarting the computer.
    Execute these commands, each on a single line:
    /sbin/fsck -fy
    /sbin/mount -uw /
    Execute this command on a single line. Important: Type the command carefully, misuse of rm may damage other files.
    rm -rf /System/Library/SystemConfiguration/ApplicationEnhancer.bundle
    Restart normally.
    If the issue persists, use solution 1 above instead.

  • Z10 won't complete setup after device software update, help please.

    Help please, cannot complete phone setup ater performing software update using Blackberry Link.
    Sequence of events;-
    Phone recognised by Blackberry Link.
    Reload device software selected - updated version 10.0.10.90 available.
    Get update - software appears to load correctly then Z10 unplugged.
    Phone reboots, Welcome to Blackberry, English(UK) ticked, swupe left.
    No SIM card available, swipe to WI-Fi.
    Password entered for home network and confirmation screen shows connected.
    Agreement Screen - Country changed to United Kingdom(English),
    at bottom of screen under I agree to the Blackberry SLA....
    the 'I Agree' and 'I Do Not Agree'  buttons can not be selected and
    after a short delay Unable to connect screen appears.
    Pressing 'Settings' goes back to Wi-Fi Networks page with
    confirmation that connection is good and round we go again.
    Having performed software update several times as above and also from
    www.BlackBerry.com/updates by following forum posting at
    http://supportforums.blackberry.com/t5/General-Bla​ckBerry-10-Smartphone/How-
    to-Reload-your-Blackberry10-OS/td-p/2187545
    and getting the same result each time I would appreciate help to resolve this issue.
    Solved!
    Go to Solution.

    Try finding a different open free Wifi hotspot to perform the setup.
    It sounds like the device is never connecting to your WiFi to complete the setup.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    There are no updates to either OS 10.5.8 or Safari 5.0.6.
    If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

  • At the end of my IMovie I want to write some text: as in" Happy Birthday Mandy we had a great time with you. etc..  How do I go about this? Which icon in IMovie lets me have a place to write text?? help please

    Please see my ? above: Im making an IMovie and need the last frame to just be text (can be on a color). I don't know how to go about doing this.  Ive already done all my photos and captions. Need to have it ready for TOMORROW: Friday May 23rd. Help please!
    Thanks

    You can choose a background for the text from Maps and Backgrounds.  Just drag a background to the end of the timeline, adjust to desired duration then drag title above it.
    Geoff.

  • I have just updated my PC with version11.14. I can no longer connect to my Bose 30 soundtouch via media player Can anyone help please

    I have a Bose soundtouch system .Until today I could play my iTunes music through it via air  player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault

    @puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
    After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
    Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

  • Photoshop Elements 6 on Mac help please !!!!!

    Hi there,
              I need help please !!!!!
    I have PSE 6 for my imac and bought myself a NIKON D60 so far so good. I have installed PSE 6 which comes with ADOBE Bridge CS3
    I have bought a book as well as I am new to photoshop and in fact DSLR cameras.
    I have got my photos into Bridge OK by the way they are JPEG format. According to the book I can open the JPEG in camera RAW by either selecting the JPEG and then pressing cmd+R or by selecting the JPEG and select open with and camera RAW should be available to selct.
    I cannot get of the options to work any ideas please
    Secondly I have taken some photos in RAW format and put then into Bridge again I cannot get the camera RAW interface to open with these neff images.
    If I try to open the image PSE 6 opens and gives me an error that the file format is not supported by PSE 6
    Am I missing something here as I have been trying for a week now !!!!!
    Sorry if this comes across a stupid question but it is new to me
    Chris      UK

    There's no "theory" about it. You should be able to open a raw file from bridge by double-clicking it, but it will open in ACR in PSE. You can't just use ACR within bridge in PSE, if that's what you're trying to do. To open a JPEG in ACR, go to file>Open in PSE and choose Camera raw as the format after you select the file but before you click Open.
    If you've correctly updated ACR, bridge should show you thumbnails of your raw files. If it doesn't try emptying the Bridge cache.

Maybe you are looking for

  • Error in labview report printing and editing

    Attached is the labview code, excel template and required output excel. I have made the excel template by merging certain cells and assigning values. Also have defined the names as tables so as to address it in labview report vi's. So kindly help me

  • IPad won't play or delete some songs

    I need some help.  I have an iPad 4 running iOS 6.1.  I had some music on it which I had downloaded from the iTunes music store (iCloud).  Everything was fine until today.  I had just downloaded a song from iTunes (iCloud) and I noticed the music app

  • Error creating a new project in trial system

    I recently registered for a trial system to check Netweaver Gateway and build some sample services. Unfortunately could able to create a new project and being challenged with attached error"You are not authorised to create a new project " Does this m

  • Inconsistent interface cause unintentional use of wrong payment method with worthless CS

    I don't forsee anything coming from this, but I will put my experiences on here. I use Paypal quite a bit, and I use the same sites a lot.  I have credit cards, and I usually want to pay by credit cards.  But because I also have bank accounts attache

  • [SOLVED] Daemon autostarting even after disabling it.

    Hello. Well, after a few problems I reinstalled mpd and ncmpcpp, because desperate attempts at trying to fix software mixing, but that's not really the problem. Anyways, disabled mpd via systemctl (both mpd and mpd.service, both as root and as --user