Joining tables EKPO & MSEG

Hi All,
This is my code:
SELECT    EKKO~EBELN
            EKKO~LIFNR
            EKKO~BUKRS
            EKKO~EKORG
            EKPO~EBELP
            EKPO~TXZ01
            EKPO~MATNR
            EKPO~MENGE
            EKPO~MEINS
            EKPO~UNTTO
            EKPO~PSTYP
         FROM EKKO
        INNER JOIN EKPO ON
        EKKOEBELN = EKPOEBELN
        INTO TABLE T_EKPO
        UP TO P_MAX ROWS
        WHERE  EKKO~EBELN IN S_EBELN
        AND EKKO~BSART IN S_BSART
        AND EKKO~LIFNR IN S_LIFNR
        AND EKKO~EKORG IN S_EKORG
        AND EKKO~EKGRP IN S_EKGRP
        AND EKKO~BEDAT IN S_BEDAT
        AND EKPO~MATNR IN S_MATNR
        AND EKPO~WERKS IN S_WERKS
        AND EKPO~MATKL IN S_MATKL
        AND EKPO~PSTYP IN R_PSTYP
        AND EKPO~KNTTP IN S_KNTTP.
   SELECT MBLNR
           ZEILE
           ERFMG
           EBELN
           EBELP
           FROM MSEG
           INTO TABLE T_MSEG
           FOR ALL ENTRIES IN T_EKPO
           WHERE EBELN = T_EKPO-EBELN
           AND EBELP = T_EKPO-EBELP.
Now i am getting time out error. Can Any one suggest how can i solve this issue.

hi,
donot join the EKKO and EKPO tables.
first select the fields of EKKO into an itab say t_ekko.
do a sy-subrc check to see if the data is coming into t_ekko.
sort ekko by ebeln.
check if t_ekko is not initial.
now select fields from ekpo into a itab say t_ekpo for all entries in ekko where EKKO-EBELN = EKPO-EBELN.
do a sy-subrc check to see if the data is coming into i_ekpo.
now write
SELECT MBLNR
ZEILE
ERFMG
EBELN
EBELP
FROM MSEG
INTO TABLE T_MSEG
FOR ALL ENTRIES IN T_EKPO
WHERE EBELN = T_EKPO-EBELN
AND EBELP = T_EKPO-EBELP.
*Remember:*
there should always be a sy-subrc check after a select or Read statement.
before using for all entries always sort an itab by the key field.
delete adjacent duplicates if the sorting is not done based on a key field.

Similar Messages

  • Report - Time out Error when Joining EKPO & MSEG

    Hi All,
    This is my code:
    SELECT    EKKO~EBELN
                EKKO~LIFNR
                EKKO~BUKRS
                EKKO~EKORG
                EKPO~EBELP
                EKPO~TXZ01
                EKPO~MATNR
                EKPO~MENGE
                EKPO~MEINS
                EKPO~UNTTO
                EKPO~PSTYP
             FROM EKKO
            INNER JOIN EKPO ON
            EKKOEBELN = EKPOEBELN
            INTO TABLE T_EKPO
            UP TO P_MAX ROWS
            WHERE  EKKO~EBELN IN S_EBELN
            AND EKKO~BSART IN S_BSART
            AND EKKO~LIFNR IN S_LIFNR
            AND EKKO~EKORG IN S_EKORG
            AND EKKO~EKGRP IN S_EKGRP
            AND EKKO~BEDAT IN S_BEDAT
            AND EKPO~MATNR IN S_MATNR
            AND EKPO~WERKS IN S_WERKS
            AND EKPO~MATKL IN S_MATKL
            AND EKPO~PSTYP IN R_PSTYP
            AND EKPO~KNTTP IN S_KNTTP.
       SELECT MBLNR
               ZEILE
               ERFMG
               EBELN
               EBELP
               FROM MSEG
               INTO TABLE T_MSEG
               FOR ALL ENTRIES IN T_EKPO
               WHERE EBELN = T_EKPO-EBELN
               AND EBELP = T_EKPO-EBELP.
    Now i am getting time out error. Can Any one suggest how can i solve this issue.

    Identical problem by different (?) user:
    Joining tables EKPO & MSEG

  • What are the common fields in table KONV = J_1IEXCHDR,EKKO,EKPO,MSEG

    Helo everyone,
    I need wht are the common fields between table of KONV and J_1IEXCHDR,EKKO,EKPO,MSEG. Pls give me details
    thanks in advance
    suresh

    check out LIFNR,KUNNR ETC

  • MKPF & MSEG Performance issue : Join on table  MKPF & MSEG  taking too much time ..

    Hello Experts,
    I had a issue where we are executing one custom report in which  i used inner join on table  MKPF & MSEG,  some time join statement  took  9-10 min to excute and some time execute within  1-2 min with same test data .
    i am not able to understand what the actaully happing .
    please help.
    code :
       SELECT f~mblnr f~mjahr f~usnam f~bktxt  p~bukrs
        INTO TABLE itab
        FROM mkpf AS f INNER JOIN mseg AS p
            ON f~mblnr = p~mblnr AND f~mjahr = p~mjahr
         WHERE f~vgart = 'WE'
           AND f~budat IN p_budat
           AND f~usnam IN p_sgtxt
           AND p~bwart IN ('101','105')
           AND p~werks IN p_werks
           AND p~lgort IN p_lgort.
    Regards,
    Dipendra Panwar.

    Hi Dipendra,
    if you call a report twice after another with the same test data for data selection, then the second run should be faster, because some data are remaining in memory and needn't to be caught from database. This will be also for the following third und further runs, until the data in the SAP memory will be removed by other programs.
    For performance traces you should try to test with a first run.
    Regards,
    Klaus

  • Field KZWI4 is not getting updated in table EKPO

    I have a case where for two scheduling agreements the pricing procedure getting determined is the same, but the field KZWI4 (subtotal 4) in table EKPO is getting updated for one SA and not for the other. The only difference in the two SAs are the tax codes. Do tax codes have any bearing on the field KZWI4 getting updated in table EKPO?
    Regards,
    Pratima.

    Hi Pratima,
    unfortunately i can only write that I am facing the same challenge at the moment. I will update the discussion as soon as I have a solution.
    Best regards
    Bjoern

  • What is the better way to join table for ASE 12.5?

    To join table with T-SQL, there are 2 options:
    select * from tab1 a join tab2 b on a.id = b.id where x=y
    select * from tab1a, tab2 b where a.id = b.id and x=y
    this is only a syntax difference or there is a performance difference? which one is better for performance?

    The first query (using the join clause) is the ANSI standard way of writing joins and is usually supported by all mainstream RDBMSs.
    The second query is the T-SQL method of writing joins and may have limited re-usability with other RDBMSs.
    In most cases which one you use is usually one of preference, ie, which ever one you're comfortable with.
    From a technical perspective there are some join constructs that you cannot build with T-SQL joins, but can build with ANSI joins (eg, you may have problems in T-SQL with a table that you want to be both a) an inner table of an outer join and b) part of a equi/inner join).
    Soooo, ANSI joins provide you a lot more flexibility in coding as well as portability (between other RDBMSs).  But if you're going to work with ASE you'll still need to understand how T-SQL joins work as you'll see quite a lot of T-SQL join-based queries.

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

  • How to use a MAP whithout join table

    Hello
    I am still evaluating KODO ;-)
    I am using kodo 3.1.2 with an evaluation version
    linux (kernel 2.6)
    SUN JDK 1.4.2_04
    MYSQL MAX 4.0.18 -Max
    IDEA 4.0.3 and ANT 1.5.4 (to be exhaustive)
    I am wondering how to configure the following mapping involving a Map. :
    public class Translation {
    private String locale;
    private String txt;
    public class TranslatableDescription {
    /**Map of Key=locale as String; Value = {@link Translation}*/
    ==> private Map translations = new HashMap(); <==
    public void addATranslation(Translation t){
    translations.put(t.getLocale(), t);
    file package.jdo :
    <?xml version="1.0"?>
    <jdo>
    <package name="data">
    <class name="Translation"/>
    <class name="TranslatableDescription">
    <field name="translations">
    <map key-type="java.lang.String"
    value-type="tutorial.data.Translation"/>
    <extension vendor-name="kodo" key="jdbc-key-size" value="10"/>
    </field>
    </class>
    </package>
    </jdo>
    The default Mapping generate a join table : TRANS_TRANSLATION which works
    fine, but I would like to remove this table by adding a
    colonne in the "TRANSLATION" table containing the JDOID of the
    TRANSLATIONDESCRIPTION owner of this TRANSLATION.
    I have made some try like this one in the mapping file
    <class name="TranslatableDescription">
    <field name="translations">
    <jdbc-field-map type="n-many-map" key-column="LOCALE"
    ref-column.JDOID="OWNERJDOID" table="TRANSLATION0"
    value-column.JDOID="JDOID"/>
    </field>
    The schema generated in my DB is correct but when I try to persist some
    objects I have the following Exception :
    727 INFO [main] kodo.jdbc.JDBC - Using dictionary class
    "kodo.jdbc.sql.MySQLDictionary" (MySQL 4.0.18'-Max' ,MySQL-AB JDBC Driver
    mysql-connector-java-3.0.10-stable ( $Date: 2004/01/13 21:56:18 $,
    $Revision: 1.27.2.33 $ )).
    Exception in thread "main" kodo.util.FatalDataStoreException: Invalid
    argument value, message from server: "Duplicate entry '2' for key 1"
    {prepstmnt 8549963 INSERT INTO TRANSLATION0 (JDOID, LOCALESTR, OWNERJDOID)
    VALUES (?, ?, ?) [reused=0]} [code=1062, state=S1009]
    NestedThrowables:
    com.solarmetric.jdbc.ReportingSQLException: Invalid argument value,
    message from server: "Duplicate entry '2' for key 1" {prepstmnt 8549963
    INSERT INTO TRANSLATION0 (JDOID, LOCALESTR, OWNERJDOID) VALUES (?, ?, ?)
    [reused=0]} [code=1062, state=S1009]
    java.sql.BatchUpdateException: Invalid argument value, message from
    server: "Duplicate entry '2' for key 1"
         at kodo.jdbc.sql.SQLExceptions.getFatalDataStore(SQLExceptions.java:42)
         at kodo.jdbc.sql.SQLExceptions.getFatalDataStore(SQLExceptions.java:24)
         at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:594)
         at
    kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:152)
         at
    kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.java:964)
         at
    kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:813)
         at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:69)
         at
    kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:542)
         at
    tutorial.CreateTranslatableDescription.main(CreateTranslatableDescription.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
    I have the feeling that KODO does try to make diffent row in the table
    "TRANSLATION0" for the TRANSLATION and the MAP.
    So, is this kind of mapping supported by KODO and if yes, how can I
    configure it.
    Thank you for your help
    Nicolas

    So, is this kind of mapping supported by KODO and if yes, how can I
    configure it.It is not directly supported. You can fake it using a one-many mapping
    (see thread: Externalizing Map to Collection of PC), but unless you must
    map to an existing schema, it's probably not worth the effort. (Note:
    also there is a bug that actually prevents this from working with 3.1.2;
    the bug is fixed for 3.1.3, but it hasn't been released yet).

  • Am inserting only one table in a join table view

    am in Jdeveloper 11.1.2.1.0
    hi i have the following view am only able to insert in one table,which is SMS_PARTY_ADDRESS,am not able to insert to the othe join table which is property, my view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="smsProp_partyAddress"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
      </DesignTime>
      <Properties>
        <SchemaBasedProperties>
          <LABEL
            ResId="sms1100.smsProp_partyAddress_LABEL"/>
        </SchemaBasedProperties>
      </Properties>
      <ViewAccessor
        Name="Sub_lov1"
        ViewObjectName="sms1100.Sub_lov"
        RowLevelBinds="true"/>
      <ListBinding
        Name="LOV_Town"
        ListVOName="Sub_lov1"
        ListRangeSize="-1"
        ComboRowCountHint="10"
        NullValueFlag="none"
        MRUCount="0">
        <AttrArray Name="AttrNames">
          <Item Value="Town"/>
        </AttrArray>
        <AttrArray Name="DerivedAttrNames">
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="TowId"/>
        </AttrArray>
        <AttrArray Name="ListAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="Id"/>
        </AttrArray>
        <AttrArray Name="ListDisplayAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="DsdRegion"/>
          <Item Value="ServiceDeliveryArea"/>
        </AttrArray>
        <DisplayCriteria/>
      </ListBinding>
      <SQLQuery><![CDATA[SELECT SmsPartyAddress.ADDRESS_LINE1,
           SmsPartyAddress.ID,
           SmsPartyAddress.ADDRESS_LINE2,
           SmsPartyAddress.ADDRESS_LINE3,
           SmsPartyAddress.ADDRESS_LINE4,
           SmsPartyAddress.ADDRESS_TYPE_IND,
           SmsPartyAddress.PAR_ID,
           SmsPartyAddress.PROP_ID,
           SmsPartyAddress.START_DT,
           SmsProperties.TOW_ID,
           SmsProperties.ID AS ID1,
           SmsProperties.ADDRESS_LINE,
           SmsProperties.ERF_NO,
           SmsProperties.WAR_ID,
           SmsProperties.ZONE,
            DECODE(TOW1.TOWN,NULL,TOW.TOWN,TOW1.TOWN)TOWN ,
           TOW.TOWN SUBURB,
           POSTAL_CODE
    FROM SMS_PARTY_ADDRESS SmsPartyAddress, SMS_PROPERTIES SmsProperties,
    SMS_TOWNS TOW
        ,SMS_TOWNS TOW1
        ,SMS_POSTAL_CODES PCOD
    WHERE SmsPartyAddress.PROP_ID = SmsProperties.ID(+)
    and TOW.PCOD_ID = PCOD.ID
        AND TOW.TOW_ID = TOW1.ID (+)
        --and TOW1.ID = SMSPROPERTIES.TOW_ID(+)
        and TOW.ID = SMSPROPERTIES.TOW_ID
        and SmsPartyAddress.prop_id = SmsProperties.id
         CONNECT BY PRIOR TOW.TOW_ID = TOW.ID]]></SQLQuery>
      <EntityUsage
        Name="SmsPartyAddress"
        Entity="sms1100.SmsPartyAddress"/>
      <EntityUsage
        Name="SmsProperties"
        Entity="sms1100.SmsProperties"
        Association="sms1100.proppaddAssociation"
        AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
        SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
        ReadOnly="true"
        Reference="true"
        DeleteParticipant="false"
        JoinType="LEFT OUTER JOIN">
        <DesignTime>
          <AttrArray Name="_srcAttributes">
            <Item Value="sms1100.SmsPartyAddress.PropId"/>
          </AttrArray>
          <AttrArray Name="_dstAttributes">
            <Item Value="sms1100.SmsProperties.Id"/>
          </AttrArray>
        </DesignTime>
      </EntityUsage>
      <ViewAttribute
        Name="AddressLine1"
        PrecisionRule="true"
        EntityAttrName="AddressLine1"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE1"/>
      <ViewAttribute
        Name="Id"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsPartyAddress"
        AliasName="ID"/>
      <ViewAttribute
        Name="AddressLine2"
        PrecisionRule="true"
        EntityAttrName="AddressLine2"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE2"/>
      <ViewAttribute
        Name="AddressLine3"
        PrecisionRule="true"
        EntityAttrName="AddressLine3"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE3"/>
      <ViewAttribute
        Name="AddressLine4"
        PrecisionRule="true"
        EntityAttrName="AddressLine4"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE4"/>
      <ViewAttribute
        Name="AddressTypeInd"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressTypeInd"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_TYPE_IND"/>
      <ViewAttribute
        Name="ParId"
        PrecisionRule="true"
        EntityAttrName="ParId"
        EntityUsage="SmsPartyAddress"
        AliasName="PAR_ID"/>
      <ViewAttribute
        Name="PropId"
        PrecisionRule="true"
        EntityAttrName="PropId"
        EntityUsage="SmsPartyAddress"
        AliasName="PROP_ID"/>
      <ViewAttribute
        Name="StartDt"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="StartDt"
        EntityUsage="SmsPartyAddress"
        AliasName="START_DT"/>
      <ViewAttribute
        Name="TowId"
        PrecisionRule="true"
        EntityAttrName="TowId"
        IsUpdateable="true"
        EntityUsage="SmsProperties"
        AliasName="TOW_ID"
        IsPersistent="true"/>
      <ViewAttribute
        Name="Id1"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsProperties"
        AliasName="ID1"/>
      <ViewAttribute
        Name="AddressLine"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressLine"
        EntityUsage="SmsProperties"
        AliasName="ADDRESS_LINE"/>
      <ViewAttribute
        Name="ErfNo"
        IsUnique="true"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="ErfNo"
        EntityUsage="SmsProperties"
        AliasName="ERF_NO"/>
      <ViewAttribute
        Name="WarId"
        PrecisionRule="true"
        EntityAttrName="WarId"
        EntityUsage="SmsProperties"
        AliasName="WAR_ID"/>
      <ViewAttribute
        Name="Zone"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="Zone"
        EntityUsage="SmsProperties"
        AliasName="ZONE"/>
      <ViewAttribute
        Name="Town"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TOWN"
        Expression="TOWN"
        SQLType="VARCHAR"
        LOVName="LOV_Town">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
        <Properties>
          <SchemaBasedProperties>
            <CONTROLTYPE
              Value="combo_lov"/>
          </SchemaBasedProperties>
        </Properties>
      </ViewAttribute>
      <ViewAttribute
        Name="Suburb"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SUBURB"
        Expression="SUBURB"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="PostalCode"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="4"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="POSTAL_CODE"
        Expression="POSTAL_CODE"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="4"/>
        </DesignTime>
      </ViewAttribute>
      <AttrArray Name="KeyAttributes">
        <Item Value="Id"/>
      </AttrArray>
      <ResourceBundle>
        <PropertiesBundle
          PropertiesFile="SmsFrontService.SmsFrontServiceBundle"/>
      </ResourceBundle>
    </ViewObject>i what to insert in both table partyAddress and propertyaddress,the property table the Updateable="never" and is disable,am not able to set is to always

    use this method but the column i still disable
    <EntityUsage
    Name="SmsProperties"
    Entity="sms1100.SmsProperties"
    Association="sms1100.proppaddAssociation"
    AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
    SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
    Reference="true"
    ReadOnly="false"
    DeleteParticipant="false"
    JoinType="LEFT OUTER JOIN">
    public class smsProp_partyAddressImpl extends ViewObjectImpl {
        protected void create(AttributeList attributeList) {
        // The view row will already have created "blank" entity instances
          SmsPropertiesImpl newProperty = new SmsPropertiesImpl();
        SmsPartyAddressImpl newPostal = new SmsPartyAddressImpl();
        //SmsPropertiesViewImpl newProperty = getSmsPropertiesView2();
        //SmsPartyAddressViewImpl  newPostal = getSmsPartyAddressView1();
        //SmsPropertiesImpl newProperty = getSmsPropertiesView2();
        //SmsPartyAddressImpl  newPostal = getSmsPartyAddressView1();
        try {
        // Let postal Address "blank" entity instance to do programmatic defaulting
        newProperty.create(attributeList);
        // Let postalAddress "blank" entity instance to do programmatic
        // defaulting passing in new SmsPropertiesImpl instance so its attributes
        // are available to the SmsPartyAddressImpl's create method.
        newPostal.create(newProperty);
        catch (JboException ex) {
        newProperty.revert();
        newPostal.revert();
        throw ex;
        catch (Exception otherEx) {
        newProperty.revert();
        newPostal.revert();
        throw new RowCreateException(true /* EO Row? */,
        "SmsProperties" /* EO Name */,
        otherEx /* Details */);
    }but the updatable="Always"
    the view is
    <?xml version="1.0" encoding="windows-1252" ?>
    <!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
    <!---->
    <ViewObject
      xmlns="http://xmlns.oracle.com/bc4j"
      Name="smsProp_partyAddress"
      Version="11.1.2.60.81"
      BindingStyle="OracleName"
      CustomQuery="true"
      PageIterMode="Full"
      UseGlueCode="false"
      RowClass="sms1100.smsProp_partyAddressRowImpl"
      ComponentClass="sms1100.smsProp_partyAddressImpl"
      RowInterface="sms1100.common.smsProp_partyAddressRow"
      ClientRowProxyName="sms1100.client.smsProp_partyAddressRowClient">
      <DesignTime>
        <Attr Name="_isExpertMode" Value="true"/>
        <Attr Name="_codeGenFlag2" Value="Access|Coll|Prog|VarAccess"/>
        <Attr Name="_isCodegen" Value="true"/>
      </DesignTime>
      <Properties>
        <SchemaBasedProperties>
          <LABEL
            ResId="sms1100.smsProp_partyAddress_LABEL"/>
        </SchemaBasedProperties>
      </Properties>
      <ViewAccessor
        Name="Sub_lov1"
        ViewObjectName="sms1100.Sub_lov"
        RowLevelBinds="true"/>
      <ListBinding
        Name="LOV_Town"
        ListVOName="Sub_lov1"
        ListRangeSize="-1"
        ComboRowCountHint="10"
        NullValueFlag="none"
        MRUCount="0">
        <AttrArray Name="AttrNames">
          <Item Value="Town"/>
        </AttrArray>
        <AttrArray Name="DerivedAttrNames">
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="TowId"/>
        </AttrArray>
        <AttrArray Name="ListAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="Id"/>
        </AttrArray>
        <AttrArray Name="ListDisplayAttrNames">
          <Item Value="Town"/>
          <Item Value="Suburb"/>
          <Item Value="PostalCode"/>
          <Item Value="DsdRegion"/>
          <Item Value="ServiceDeliveryArea"/>
        </AttrArray>
        <DisplayCriteria/>
      </ListBinding>
      <SQLQuery><![CDATA[SELECT SmsPartyAddress.ADDRESS_LINE1,
           SmsPartyAddress.ID,
           SmsPartyAddress.ADDRESS_LINE2,
           SmsPartyAddress.ADDRESS_LINE3,
           SmsPartyAddress.ADDRESS_LINE4,
           SmsPartyAddress.ADDRESS_TYPE_IND,
           SmsPartyAddress.PAR_ID,
           SmsPartyAddress.PROP_ID,
           SmsPartyAddress.START_DT,
           SmsProperties.TOW_ID,
           SmsProperties.ID AS ID1,
           SmsProperties.ADDRESS_LINE,
           SmsProperties.ERF_NO,
           SmsProperties.WAR_ID,
           SmsProperties.ZONE,
            DECODE(TOW1.TOWN,NULL,TOW.TOWN,TOW1.TOWN)TOWN ,
           TOW.TOWN SUBURB,
           POSTAL_CODE
    FROM SMS_PARTY_ADDRESS SmsPartyAddress, SMS_PROPERTIES SmsProperties,
    SMS_TOWNS TOW
        ,SMS_TOWNS TOW1
        ,SMS_POSTAL_CODES PCOD
    WHERE SmsPartyAddress.PROP_ID = SmsProperties.ID(+)
    and TOW.PCOD_ID = PCOD.ID
        AND TOW.TOW_ID = TOW1.ID (+)
        --and TOW1.ID = SMSPROPERTIES.TOW_ID(+)
        and TOW.ID = SMSPROPERTIES.TOW_ID
        and SmsPartyAddress.prop_id = SmsProperties.id
         CONNECT BY PRIOR TOW.TOW_ID = TOW.ID]]></SQLQuery>
      <EntityUsage
        Name="SmsPartyAddress"
        Entity="sms1100.SmsPartyAddress"/>
      <EntityUsage
        Name="SmsProperties"
        Entity="sms1100.SmsProperties"
        Association="sms1100.proppaddAssociation"
        AssociationEnd="sms1100.proppaddAssociation.SmsProperties"
        SourceUsage="sms1100.smsProp_partyAddress.SmsPartyAddress"
        Reference="true"
        ReadOnly="false"
        DeleteParticipant="false"
        JoinType="LEFT OUTER JOIN">
        <DesignTime>
          <AttrArray Name="_srcAttributes">
            <Item Value="sms1100.SmsPartyAddress.PropId"/>
          </AttrArray>
          <AttrArray Name="_dstAttributes">
            <Item Value="sms1100.SmsProperties.Id"/>
          </AttrArray>
        </DesignTime>
      </EntityUsage>
      <ViewAttribute
        Name="AddressLine1"
        PrecisionRule="true"
        EntityAttrName="AddressLine1"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE1"/>
      <ViewAttribute
        Name="Id"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsPartyAddress"
        AliasName="ID"/>
      <ViewAttribute
        Name="AddressLine2"
        PrecisionRule="true"
        EntityAttrName="AddressLine2"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE2"/>
      <ViewAttribute
        Name="AddressLine3"
        PrecisionRule="true"
        EntityAttrName="AddressLine3"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE3"/>
      <ViewAttribute
        Name="AddressLine4"
        PrecisionRule="true"
        EntityAttrName="AddressLine4"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_LINE4"/>
      <ViewAttribute
        Name="AddressTypeInd"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressTypeInd"
        EntityUsage="SmsPartyAddress"
        AliasName="ADDRESS_TYPE_IND"/>
      <ViewAttribute
        Name="ParId"
        PrecisionRule="true"
        EntityAttrName="ParId"
        EntityUsage="SmsPartyAddress"
        AliasName="PAR_ID"/>
      <ViewAttribute
        Name="PropId"
        PrecisionRule="true"
        EntityAttrName="PropId"
        EntityUsage="SmsPartyAddress"
        AliasName="PROP_ID"/>
      <ViewAttribute
        Name="StartDt"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="StartDt"
        EntityUsage="SmsPartyAddress"
        AliasName="START_DT"/>
      <ViewAttribute
        Name="TowId"
        PrecisionRule="true"
        EntityAttrName="TowId"
        EntityUsage="SmsProperties"
        AliasName="TOW_ID"/>
      <ViewAttribute
        Name="Id1"
        IsUpdateable="while_insert"
        PrecisionRule="true"
        EntityAttrName="Id"
        EntityUsage="SmsProperties"
        AliasName="ID1"/>
      <ViewAttribute
        Name="AddressLine"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="AddressLine"
        EntityUsage="SmsProperties"
        AliasName="ADDRESS_LINE"/>
      <ViewAttribute
        Name="ErfNo"
        IsUnique="true"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="ErfNo"
        EntityUsage="SmsProperties"
        AliasName="ERF_NO"/>
      <ViewAttribute
        Name="WarId"
        PrecisionRule="true"
        EntityAttrName="WarId"
        EntityUsage="SmsProperties"
        AliasName="WAR_ID"/>
      <ViewAttribute
        Name="Zone"
        IsNotNull="true"
        PrecisionRule="true"
        EntityAttrName="Zone"
        EntityUsage="SmsProperties"
        AliasName="ZONE"/>
      <ViewAttribute
        Name="Town"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="TOWN"
        Expression="TOWN"
        SQLType="VARCHAR"
        LOVName="LOV_Town">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
        <Properties>
          <SchemaBasedProperties>
            <CONTROLTYPE
              Value="combo_lov"/>
          </SchemaBasedProperties>
        </Properties>
      </ViewAttribute>
      <ViewAttribute
        Name="Suburb"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="60"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="SUBURB"
        Expression="SUBURB"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="60"/>
        </DesignTime>
      </ViewAttribute>
      <ViewAttribute
        Name="PostalCode"
        IsPersistent="false"
        PrecisionRule="true"
        Precision="4"
        Type="java.lang.String"
        ColumnType="VARCHAR2"
        AliasName="POSTAL_CODE"
        Expression="POSTAL_CODE"
        SQLType="VARCHAR">
        <DesignTime>
          <Attr Name="_DisplaySize" Value="4"/>
        </DesignTime>
      </ViewAttribute>
      <AttrArray Name="KeyAttributes">
        <Item Value="Id"/>
      </AttrArray>
      <ResourceBundle>
        <PropertiesBundle
          PropertiesFile="SmsFrontService.SmsFrontServiceBundle"/>
      </ResourceBundle>
    </ViewObject>am also geting this error in my view after i set readOnly="false"
    Remove updateable flag from entity usage or mark attributes as key attributes for this entity usage
    i follow your link

  • MVC: Create a view which populates two (or more) joined tables in a single view table

    I am beginner in MVC and I would like to create a view which populates two (or more) joined tables in a single view table as described below.
    I have two tables:
    1 - Bloggers: - bloggerID (int);
                        - bloggerName (string)
    2 - Blogs: - blogID (int);
    bloggerID (int);
                    - blogTitle (string);
                    - blogImage (string)
    A blogger can have one or more blogs while one blog must be related to only one blogger.
    I would like to have a view table on my webpage as the following:
    Blogger Name
    Blog Title
    Blog Image
    Noris Gang
    Virus
    virus.jpg
    Noris Gang
    Desktops
    desktop.jpg
    Gauthier
    Books
    books.png
    John Leon
    NNNMHJhjdhj
    Nmbj.jpg
    I'm using MVC 4 (or at least 3).
    Thanks for your help.

    Hello,
    From your description, it is not very clear that what you mean about the View, if it means the View concept in database as SQL Server, your required view should be as below:
    Create view
    as
    Select Bloggers.bloggerName, Bloggers.blogTitle, Bloggers.blogImage
    From Bloggers join Blogs on Bloggers.bloggerID = Blogs. bloggerID
    If it means the UI view in MVC concept, I suggest you could ask it on the MVC forum:
    http://forums.asp.net/1146.aspx
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the Pros and Cons while joining tables at DF and Universe level

    Hi Experts,
    I am new to Data federator designer. I need help on the below.
    Could you please let me know the Pros and Cons while joining the source tables in data federator
    And While joining the DF target tables in universe designer.
    Regards,
    Gana

    Hi,
    1. I have created target tables based on source tables with one to one mapping and then join all target tables in universe.
    Ex: Source tables: Infocube text tables, fact tables and 3rd party data base table
    Target tables:Target tables are same as source tables
    --- Yes this is the way to create target Tables  and join them in the universe.These target Tables gives you the flexibility  like in future your requirement is to add one more object based on some calculation which is not possible in the universe so that time you can create  one more column in the target table and do the calculation. at the same time if you are using source table you can not do anything.
    2. Created single target table with all objects of source tables and merged all sources tables data.
    Ex: Source tables: Infocube text tables, fact tables and 3rd party data base table
    Target table: Single table.
    --- This is bit complex structure to merge all tables data in the one target table.in this situation you have to put more efforts and it is more complex.basically this type of target table is useful when you are merging data by multiple source into single  or  creating one target table based on the  union of tables by adding two mapping rules or more and you can not join tables in universe.
    Better approach is first 1. create target tables based on the source tables and join them in the universe.
    Thanks,
    Amit

  • Additional field in join table for CMP EJB

    Hello,
    I'm trying to perform this task using CMP entity beans:
    The entity A has a CMR relation of cardinality m-n with entity B (bidirectional) (This is working fine).
    I want to add a parameter to the relation.
    Ex : When I find that A1 is linked to B1, I need to perform "x" times an action. x would be my parameter, and I would have kept this parameter as an additional column in the join table A_TO_B.
    Could anyone provide an example of how to perform this with CMP EJB?
    NOTE: I'm using OC4J 10g 9.0.4 standalone (and cannot change my version).
    Thanks
    Tanguy

    Manohar,
    You need to create an append structure for table VBAP (for example ZAVBAP) using SE11. In this structure you create your ZZ fields. If you need a non-SAP domain/data element for your field then you need to create it first using the same transaction and activate it. Attach ZAVBAP to VBAP so the SE11 shows:
    .APPEND in the Fields column and
    ZAVBAP in the Field type column.
    Your ZZ fields will be shown automatically.
    When you have finished then activate your ZAVBAP structure. You will notice when you go VA01 (for example) that a lot of programs are being recompiled. Don't worry. It will be ok.
    The user-exit screen number for items is 8459 (in program SAPMV45A).
    Thanks,
    Wojtek

  • Problem in joining tables

    Hi All,
    Here I am facing the problem in Joining table I have S031,s032,makt,marc,I need a field ATWRT field from CAWN table,I did't find any link for this above from tables, any one please help me how to find out.
    REPORT  ZMMTEST.
    tables:s031,s032,makt,marc.
    DATA : BEGIN OF itab1 OCCURS 0,
           matnr TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           END OF itab1.
    DATA : BEGIN OF itab2 OCCURS 0,
           matnr like makt-matnr,
           maktx like makt-maktx,
           END OF itab2.
    DATA : BEGIN OF itab3 OCCURS 0,
           matnr TYPE marc-matnr,
           werks type marc-werks,
           ekgrp type marc-ekgrp,
           END OF itab3.
    DATA : BEGIN OF itab4 OCCURS 0 ,
           matnr   TYPE s032-matnr,
           lgort   TYPE s032-lgort,
           werks   TYPE s032-werks,
           mbwbest type s032-mbwbest,
           wbwbest type s032-wbwbest,
           END OF itab4.
    data : begin of itab5 occurs 0,
          objek   type ausp-objek,
           atwrt   type cawn-atwrt,
           end of itab5.
    DATA : BEGIN OF itab_final1 OCCURS 0,
           matnr      TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           maktx      TYPE makt-maktx,
           ekgrp      type marc-ekgrp,
           mbwbest    type s032-mbwbest,
           wbwbest    type s032-wbwbest,
           END OF itab_final1.
    DATA : BEGIN OF itab_final OCCURS 0,
           matnr      TYPE s031-matnr,
           lgort      TYPE s031-lgort,
           werks      TYPE s031-werks,
           spmon      TYPE s031-spmon,
           magbb      type S031-magbb,
           wagbb      type S031-wagbb,
           azubb      type S031-azubb,
           aagbb      type S031-aagbb,
           maktx      TYPE makt-maktx,
           ekgrp      type marc-ekgrp,
           mbwbest    type s032-mbwbest,
           wbwbest    type s032-wbwbest,
           atwrt      type cawn-atwrt,
           END OF itab_final.
    select-options:s_matnr for s031-matnr.
    start-of-selection.
    select matnr lgort werks spmon magbb wagbb azubb aagbb
            from s031 into  table itab1
            where matnr in s_matnr.
    if not itab1[] is initial.
        select matnr maktx from makt into table itab2 for all entries in itab1 where matnr = itab1-matnr.
    if not itab2[] is initial.
       select matnr werks ekgrp from marc into table itab3 for all entries in itab2 where matnr = itab2-matnr.
    if not itab3[] is initial.
       select matnr werks mbwbest wbwbest from s032 into corresponding fields of table itab4 for all entries in itab3 where matnr = itab3-matnr.
    *if not itab4[] is initial.
       select atwrt from cawn into corresponding fields of table itab5.*
         endif.
       endif.
    endif.
    endif.
    end-of-selection.
      loop at itab3.
       itab_final-matnr = itab3-matnr.
       read table itab2 with key matnr = itab3-matnr.
       if sy-subrc = 0.
        itab_final-maktx = itab2-maktx.
       read table itab1 with key matnr = itab2-matnr.
       if sy-subrc = 0.
        itab_final-lgort = itab1-lgort.
        itab_final-werks = itab1-werks.
        itab_final-spmon = itab1-spmon.
        itab_final-magbb = itab1-magbb.
        itab_final-wagbb = itab1-wagbb.
        itab_final-azubb = itab1-azubb.
        itab_final-aagbb = itab1-aagbb.
      endif.
       endif.
       itab_final-ekgrp = itab3-ekgrp.
      read table itab4 with key matnr  = itab3-matnr.
      if sy-subrc = 0.
      itab_final-mbwbest = itab4-mbwbest.
      endif.
    itab_final-wbwbest = itab4-wbwbest.
      append itab_final.
      clear itab_final.
      endloop.
    WRITE: /2 'material', 23 'storagelocation',29  'plant',35 'date',44 'val.stock.issue',66 'val.stock.issue.value',86 'no.of.stock.receipts',97 'no.of.stock.issues',150 'material.des', 160 'pur.group',190 'stock.val',210 'stock.quan'.
      ULINE.
      loop at itab_final.
      WRITE: /2 itab_final-matnr, 23 itab_final-lgort,29  itab_final-werks,35 itab_final-spmon,44 itab_final-magbb,66 itab_final-wagbb,86 itab_final-azubb,97 itab_final-aagbb,
               150 itab_final-maktx, 160 itab_final-ekgrp,190 itab_final-wbwbest,210 itab_final-mbwbest,itab_final-atwrt.
    ENDLOOP.
    Thanks&regds,
    Sree.

    Hi sree,
    take join between s031-sptag ,ausp-datuvthen fetch records based on this condition.(itab1)
    After retrieve records based on join condition between
    ausp-atinn,ausp-adzhl and cawn-atinn,cawn-adzhl.(itab2)
    Retrieve records using for all entries bet first join condition and second join condition.
    use for all entries between itab1 and itab2.
    it will work surely.
    reaward points

  • Joining table in GRC 10 Process Control

    Hi,
    I am trying to create a new Data Source in GRC 10 Process Control. I need to join tables AGR_1251 (main table) and AGR_USERS. I am selecting AGR_1251 as main table. However, nothing comes up when I try to select AGR_USERS as 'Related Table'. On searching AGR_USERS , the system does not return any tables. Both are transparent tables and hence can be joined. I tried using both 'Reference Tables' as well as 'Dependent Tables' .
    Can you also explain the difference between 'Reference Tables' and 'Dependent Tables'.
    Regards,

    Hi Amarnath,
    tables is used to provide the table for the CURR(currency) or QUAN (quantity) fields.
    In your case you want to join tables via foreign key(s) and therefore will have to use dependant tables.
    The search for table AGR_USERS as dependant table for AGR_1251 will not return anything since the only table
    referred as check table (for a foreign key) in AGR_1251 is AGR_DEFINES.
    I would suggest to build your query based on defined check tables (see se11) of the needed tables (in this case AGR_DEFINE is the common point of both AGR_USERS & AGR_1251).
    Kind regards,
    Pascal

  • DB connectivi​ty toolkit: syntax error in a SELECT data from joined tables

    Hello everyone
    I'm trying to put in labview an SQL query on joined tables.
    As example I take a DB for storing the data of 2on2 basketball games, whose tables are
    matches(matchId,teamA,teamB)
    teams(teamId,PlayerAname,PlayerBname,Nationality)
    nationalities(NatId,natName)
    To get a result table with the match number and the player names along with their nationality I use this query on MySQL (which works on the command line interface)
    SELECT MatchID,
                     t1.PlayerAName, t1.PlayerBName, n1.natName,
                     t2.PlayerAName, t2.PlayerBName, n2.natName
    FROM matches m
    INNER JOIN teams t1 ON t1.teamID = m.teamA
    INNER JOIN teams t2 ON t2.teamID = m.teamB
    INNER JOIN nationalities n1 ON n1.natID = t1.nationality
    INNER JOIN nationalities n2 ON n2.natID = t2.nationality
    When I put it in labview, using the "select data" block, I get a syntax error as shown in the attached screenshot.
    Am I mistanking something in using the JOIN statements, or the aliases?
    Thanks in advance!
    Solved!
    Go to Solution.
    Attachments:
    select2dabone.vi ‏12 KB

    Giovasa wrote:
    I do't like very much the chain of blocks execute query+n*(fetch element)+free object, so I try to avoid that as much that I can...
    Sounds like a prime candidate for a subVI. You don't have to use it every time, but it probably would help for cases where you do want to put the SQL query directly in code.
    Incidentally, if you're doing joins, you might consider using views, as that allows you to hide the details of the interactions of the tables in the DB itself.
    Try to take over the world!

Maybe you are looking for

  • M_View failed inrefresh throws error: ORA-12008/ORA-01843:not a valid month

    I am not able to refresh this matrialized view in 2 databases.Can some one help please ====================================================== SQL> exec dbms_refresh.refresh('OID_SYNCH.OID_SYNCH_EMPLOYEES_HR'); BEGIN dbms_refresh.refresh('OID_SYNCH.OI

  • Are Vendor Payment Terms on RFx Object in Sourcing?

    Hi There, We uncovered this document via a Google search: http://help.sap.com/scenarios_bus2008/helpdata/en/6d/4c0a50eab44534bef84c9b7bcec94a/content.htm The document implies that the vendor payment terms are on the RFx object but I cannot confirm th

  • Adding a Tab in a PM notification

    Experts, How do I go about adding a tab in a PM notification? I have a requirement of adding a 'causes' tab for capturing of the object part, damage etc. and also for entering user defined codes for capturing an RCA in SAP. see screen below

  • HT1222 Can someone help me use the new iTunes 11?

    I can't seem to figure out how to move songs onto my iPhone.

  • RemoveAll doesn't remove all elements

    Hey All, I'm having an issue with removeAll not removing all the element every time. Sometimes it does, and sometimes it seems to miss one or two. I am holding a number of Message objects in a TreeSet, and have other TreeSet's that also contain Messa