Joins and use FOR ALL ENTRIES
Two questions :
<b>(1) I use join with for all entries: the performance will go down?:</b>
SELECT t1~MBLNR t1~MJAHR ZEILE BUDAT
INTO TABLE gt_mseg
FROM MSEG as T1 INNER JOIN MKPF AS T2
ON T1~MBLNR = T2~MBLNR and
T2~MJAHR = T2~MJAHR
FOR ALL ENTRIES IN gt_coss
WHERE T1~MJAHR = gt_coss-GJAHR AND
T1~AUFNR = gt_coss-aufnr AND
( BWART = '261' OR
BWART = '262' ) AND
T2~BUDAT IN r_budat.
<b>(2) With "For all entries", if itab is too long, performance will go down?. In affirmative case. What can I do?</b>
Hi Jose,
You'll have to make sure your global table gt_coss isn't empty.
A nasty little habit of the IN statement (for all entries is a kind of IN statement)
is that when it is empty, the system selekts all records.
You might know this when u use Select-Options in your statement (like r_budat).
Also there is an OSS note on he for all entries (531337) problems on i-series database.
Greetings Fred.
Similar Messages
-
Inner join and select for all entries with respect to performance
Hi Friends,
I just want to know which is more efficient with respect to performance the Inner join or select for all entries?which is more efficient? and how? can you explain me in detail ?
Regards,
DineshINNER JOIN->
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join. With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view. With an outer join, records are also selected for which there is no entry in some of the tables used in the view.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ec77446011d189700000e8322d00/content.htm
FOR ALL ENTRIES->
Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
Not Recommended
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
Recommended
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry. -
Inner join and select for all entries with respect to performance in SAP
Hi Friends,
I just want to know which is more efficient with respect to performance the Inner join or select for all entries?which is more efficient?
Regards,
DineshI did some testing a while ago and found that a JOIN is usually a bit more efficient than FOR ALL ENTRIES. This wasn't always the case though, so the best thing to do is to write it both ways and see which is faster.
Rob -
Can a JOIN statement be rewritten using FOR ALL ENTRIES in any case ?
I had a SELECT statement, like:
select p~key1 t~col3 t~col4 p~col2 p~col3
into table itab1
from ( table1 as p left outer join table2 as t
on p~key1 = t~key1 and t~col2 = someValue ).
Among which, table1 and table2 are fully buffered.
Code Inspector suggests that this statement should be, e.g., rewritten using FOR ALL ENTRIES.
Since FOR ALL ENTRIES is only possible for WHERE conditions of the SELECT statement, which means the internal table right after it is not available for the RESULT clause of the SELECT statement, can the above statement be rewritten? If yes, how?
Thanks!hi ,
select pkey1 tcol3 tcol4 pcol2 p~col3
into table itab1
from ( table1 as p left outer join table2 as t
on pkey1 = tkey1 and t~col2 = someValue ).
<i>look below code</i>
select * from table2 into table int_tab2 where col2 = someValue.
select key1 col2 col3 into table int_tab1
FOR ALL ENTRIES IN int_tab2
WHERE key = int_tab2-key1.
then use read statements for manipulations
rgds
Anver -
What is the condition for using 'for all entries' and why?
what is the condition for using 'for all entries' and why? can any body tell the reason for this ? its a big favour of me .
regards,
ravi.hi,
for all entries is used to join two or more tables.
It is same as join but performance wise for all entries is more effective.
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT
statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol
itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result
set. If the internal table itab does not contain any entries, the system treats the statement as though there were
no WHERE cond condition, and selects all records (in the current client).
for example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
this condition, return all entries of the sflight
hen using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
So for all entries is used for filtering out the data from the two tables based on the entries in them.
Advantages:
1) For all entries avoids inner join & so the performance increases.
2) For specified values in 1 itab, if you to fetch values from other table you can use it.
3) Use of select stmt in loop is gets avoided, as u can use read statement on the the new itab. -
Left outer join using For All Entries
how to implement left outer join using for all entries In REPORTS.
hi Mansi,
this is how i populate
SELECT VGBEL LFIMG POSNR VBELN FROM LIPS INTO TABLE IT_delv FOR ALL ENTRIES IN IT_VBAP WHERE VGBEL = IT_VBAP-VBELN.
LOOP AT IT_delv INTO WA_delv.
WA_FINAL-VBELN_1 = WA_DELV-VBELN_1.
WA_FINAL-LFDAT = WA_DELV-LFDAT.
WA_FINAL-LFIMG = WA_DELV-LFIMG.
WA_FINAL-POSNR2 = WA_DELV-POSNR2..
APPEND WA_FINAL TO IT_FINAL.
CLEAR: WA_FINAL , WA_delv.
ENDLOOP.
LOOP AT IT_FINAL INTO WA_FINAL.
READ TABLE IT_vbap INTO WA_vbap WITH KEY VGBEL = WA_FINAL-VBELN.
WA_FINAL-VBELN = WA_VBAP-VBELN.
WA_FINAL-MATNR = WA_VBAP-MATNR.
WA_FINAL-KWMENG = WA_VBAP-KWMENG.
WA_FINAL-NETWR = WA_VBAP-NETWR.
MODIFY IT_FINAL FROM WA_FINAL.
ENDLOOP.
My question is , it_vbap has 5 five records A,B,C,D,E.
in it_delv ,there are 20 record corrresponding to A,B,D of IT_VBAP.
in final table i wont get info of recors B,E. I want those info also in final table ..how can i do that... -
SD Flow program using For all entries.
using simple ALV grid: I have the urgent requirement of changing the following program using 'For all entries' instead of joins and I should not use 'TABLES' -- For top-of-page I need to get dynamic fields like if I select company code in the selection screen then I need to get 'This report is base on COMPANY CODE'.
This program is about sales flow where i shud get only those records that have ebeln in vbak, delivery, invoice.
The original program is as follows:
*& Report ZSD_DOCU_FLOW *
REPORT zsd_docu_flow NO STANDARD PAGE HEADING .
* Program : ZCOS_SALES *
* Dev. Class : ZSD
* Functional :
* Created on : *
* Project :
* CR Number :
* Transaction : ZSDCSUT *
* Description : * Sales document life cylce for given customer
* to declaired period displaying the sales document
* details ,with relevant del details and corresponding
* Invocie Details
*----------- Tables Declaration -----------*
TABLES: vbak,vbap,vbfa,kna1,vbrk,vbrp,likp,lips,t001.
TYPE-POOLS : slis.
*----------- Internal Tables Declaration -----------*
* Internal Table for Sales Order data *
DATA: BEGIN OF it_so OCCURS 0,
vbeln LIKE vbak-vbeln,
kunnr LIKE vbak-kunnr,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
kwmeng LIKE vbap-kwmeng,
netwr LIKE vbap-netwr,
END OF it_so.
* Internal Table for Delivery Order data *
DATA: BEGIN OF it_del OCCURS 0,
delnum LIKE likp-vbeln,
lfdat LIKE likp-lfdat,
delitem LIKE lips-posnr,
lfimg LIKE lips-lfimg,
END OF it_del.
* Internal Table for Invoice data *
DATA: BEGIN OF it_inv OCCURS 0,
invnum LIKE vbrk-vbeln,
invitem LIKE vbrp-posnr,
fkimg LIKE vbrp-fkimg,
amount LIKE vbrp-netwr,
END OF it_inv.
* Internal Table for Final data *
DATA: BEGIN OF it_final OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
kunnr LIKE vbak-kunnr,
name LIKE kna1-name1,
matnr LIKE vbap-matnr,
kwmeng LIKE vbap-kwmeng,
netwr LIKE vbap-netwr,
delnum LIKE likp-vbeln,
lfdat LIKE likp-lfdat,
delitem LIKE lips-posnr,
lfimg LIKE lips-lfimg,
invnum LIKE vbrk-vbeln,
invitem LIKE vbrp-posnr,
fkimg LIKE vbrp-fkimg,
amount LIKE vbrp-netwr,
END OF it_final.
*----------- Variables Declaration -----------*
DATA: v_name LIKE kna1-kunnr," variable for customer name
v_delnum LIKE likp-vbeln," variable for delivery number
v_invnum LIKE vbrk-vbeln." variable for invoce number
DATA : ls_layout TYPE slis_layout_alv,
it_fcat TYPE slis_t_fieldcat_alv ,
wa_fcat TYPE slis_fieldcat_alv,
lh TYPE slis_t_listheader,
ls TYPE slis_listheader,
it_events TYPE slis_t_event ,
ls_event TYPE slis_alv_event ,
i_sort TYPE slis_t_sortinfo_alv,
w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20).
DATA : l_repid LIKE trdir-name.
l_repid = 'ZSD_DOCU_FLOW1'.
*----------- Select-options & parameters Declaration ---*
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs LIKE vbak-bukrs_vf,
p_vkorg LIKE vbak-vkorg,
p_vtweg LIKE vbak-vtweg,
p_spart LIKE vbak-spart.
SELECT-OPTIONS: s_kunnr FOR vbak-kunnr,
s_audat FOR vbak-audat.
SELECTION-SCREEN END OF BLOCK b1.
*----------- AT SELECTION-SCREEN --------------------------*
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001 INTO t001
WHERE bukrs = p_bukrs.
IF sy-subrc <> 0.
MESSAGE e000(8i) WITH 'Enter a Valid Company Code'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
WHERE vkorg = p_vkorg.
IF sy-subrc <> 0.
MESSAGE e000(8i) WITH 'Enter a Valid Sales Organization'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
WHERE vtweg = p_vtweg.
IF sy-subrc <> 0.
MESSAGE e000(8i) WITH 'Enter a Valid distribution channel'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
WHERE spart = p_spart.
IF sy-subrc <> 0.
MESSAGE e000(8i) WITH 'Enter a Valid Division'.
ENDIF.
SELECT SINGLE * FROM kna1 INTO kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc <> 0.
MESSAGE e000(8i) WITH 'Enter a Valid Customer Number'.
ENDIF.
*----------- START-OF-SELECTION-----------------------------*
START-OF-SELECTION.
ls-typ = 'H'.
ls-info = 'Sales Document Flow'.
APPEND ls TO lh.
ls-typ = 'S'.
WRITE: sy-datum TO l_date USING EDIT MASK '__/__/____'.
CONCATENATE 'DATE :' l_date INTO l_date1 SEPARATED BY space.
ls-info = l_date1.
APPEND ls TO lh.
PERFORM field_cat.
PERFORM t_sort_build USING i_sort.
PERFORM get-data.
*----------- END-OF-SELECTION-----------------------------*
END-OF-SELECTION.
IF it_final[] IS INITIAL.
MESSAGE i000(8i) WITH 'No data Found'.
EXIT.
ENDIF.
PERFORM print-data.
*& Form get-data
* text
* --> p1 text
* <-- p2 text
FORM get-data .
* Accesing Sales Data
SELECT a~vbeln a~kunnr b~posnr b~matnr b~kwmeng b~netwr
INTO CORRESPONDING FIELDS OF TABLE it_so
FROM vbak AS a INNER JOIN vbap AS b
ON a~vbeln = b~vbeln
WHERE a~bukrs_vf = p_bukrs
AND a~vkorg = p_vkorg
AND a~vtweg = p_vtweg
AND a~spart = p_spart
AND a~kunnr IN s_kunnr
AND a~audat IN s_audat.
LOOP AT it_so.
SELECT SINGLE name1 FROM kna1 INTO v_name
WHERE kunnr = it_so-kunnr.
SELECT SINGLE vbeln FROM vbfa INTO v_delnum
WHERE vbelv = it_so-vbeln
AND vbtyp_n = 'J'.
IF sy-subrc = 0.
SELECT SINGLE vbeln FROM vbfa INTO v_invnum
WHERE vbelv = v_delnum
AND vbtyp_n = 'M'.
ENDIF.
MOVE-CORRESPONDING it_so TO it_final.
it_final-name = v_name.
it_final-delnum = v_delnum.
it_final-invnum = v_invnum.
APPEND it_final.
CLEAR it_final.
CLEAR v_delnum.
CLEAR v_invnum.
ENDLOOP.
LOOP AT it_final.
IF it_final-delnum NE ' '.
* Reading Del Data.
SELECT SINGLE a~vbeln a~lfdat b~posnr b~lfimg INTO
(it_del-delnum, it_del-lfdat, it_del-delitem,
it_del-lfimg ) FROM
likp AS a INNER JOIN lips AS b ON a~vbeln = b~vbeln
WHERE a~vbeln = it_final-delnum
AND b~posnr = it_final-posnr.
MOVE-CORRESPONDING it_del TO it_final.
MODIFY it_final.
ENDIF.
IF it_final-invnum NE ' '.
* Reading Invoice Data.
SELECT SINGLE vbeln posnr fkimg netwr INTO
(it_inv-invnum, it_inv-invitem, it_inv-fkimg, it_inv-amount )
FROM vbrp WHERE vbeln = it_final-invnum
AND posnr = it_final-posnr.
MOVE-CORRESPONDING it_inv TO it_final.
MODIFY it_final.
ENDIF.
ENDLOOP.
ENDFORM. " get-data
*& Form print-data
* text
* --> p1 text
* <-- p2 text
FORM print-data .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = l_repid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
it_fieldcat = it_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
IT_SORT = i_sort[]
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final.
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
* IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM. " print-data
*& Form field_cat
* text
* --> p1 text
* <-- p2 text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'VBELN'.
wa_fcat-key = 'X'.
wa_fcat-ref_fieldname = 'VBELN'.
wa_fcat-ref_tabname = 'VBAK'.
wa_fcat-seltext_m = 'Sales Order NO'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'POSNR'.
wa_fcat-ref_fieldname = 'POSNR'.
wa_fcat-ref_tabname = 'VBAP'.
wa_fcat-seltext_m = 'SalesItemNO'.
wa_fcat-fix_column = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'KUNNR'.
wa_fcat-seltext_m = 'CUSTNUM'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'NAME'.
wa_fcat-seltext_m = 'CUSTNAME'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'MATNUM'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'KWMENG'.
wa_fcat-seltext_m = 'Sales Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'NETWR'.
wa_fcat-seltext_m = 'Value'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'DELNUM'.
wa_fcat-seltext_m = 'DeloveryNum'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'DELITEM'.
wa_fcat-seltext_m = 'DelItemNO'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'LFDAT'.
wa_fcat-seltext_m = 'DelDate'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'LFIMG'.
wa_fcat-seltext_m = 'DelQuantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'INVNUM'.
wa_fcat-seltext_m = 'InvoiceNum'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'INVITEM'.
wa_fcat-seltext_m = 'InvoiceItem'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'FKIMG'.
wa_fcat-seltext_m = 'INVQuantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'AMOUNT'.
wa_fcat-seltext_m = 'INVvalue'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM. " field_cat
*& Form top
* text
FORM t_sort_build USING l_sort TYPE slis_t_sortinfo_alv.
DATA: ls_sort TYPE slis_sortinfo_alv.
ls_sort-fieldname = 'VBELN'.
ls_sort-spos = 1.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO l_sort.
ls_sort-fieldname = 'KUNNR'.
ls_sort-spos = 2.
ls_sort-up = 'X'.
APPEND ls_sort TO l_sort.
ENDFORM. "t_sort_bui
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = lh
* I_LOGO =
* I_END_OF_LIST_GRID =
ENDFORM. "TOP
===========================================================================
I have started the new program but i have trouble with the final internal table. Since i'm using For all entries I have declared internal tables for each table. My incomplete new program is as follows(not sure if the logic is correct till what I have coded):
*& Report Z_SDFLOW *
REPORT Z_SDFLOW NO STANDARD PAGE HEADING.
********* TABLES TO BE USED ***********************
**** VBAK - SALES DOCUMENT HEADER
* VBAP - SALES ITEM
* VBFA - SALES DOCUMENT FLOW
* KNA1- CUSTOMER MASTER
* VBRK - BILLING DOCUMENT HEADER
* VBRP - BLLING DOCUMENT ITEM
* LIKP - DELIVERY HEADER
* LIPS - DELIVERY ITEM
* TOO1 - COMPANY CODES
* SLIS.
TYPE-POOLS: SLIS.
** STRUCTURE DECLARATIONS ********
**STRUCTURE FOR ENQUIRY.
**STRUCTURE FOR QUOTATION.
**STRUCTURE FOR SALES ORDER HEADER- VBAK.
TYPES: BEGIN OF XT_VBAK,
VBELN TYPE VBAK-VBELN, "SALES DOCUMENT NUMBER
KUNNR TYPE VBAK-KUNNR, " SOLD-TO-PARTY
END OF XT_VBAK.
**STRUCTURE FOR SALES ORDER ITEM-VBAP
TYPES: BEGIN OF XT_VBAP,
POSNR TYPE VBAP-POSNR, " SALES ITEM NUMBER
MATNR TYPE VBAP-MATNR, " MATERIAL NUMBER
KWMENG TYPE VBAP-KWMENG, " CUMMULATIVE ORDER QUANTITY IN SALES UNITS
NETWR TYPE VBAP-NETWR, " NET VALUE OF THE ORDER ITEM
END OF XT_VBAP.
** STRUCTURE FOR DELIVERY HEADER -LIKP
TYPES: BEGIN OF XT_LIKP,
DELVBELN TYPE LIKP-VBELN, "DELIVERY DOCUMENT NUMBER
LFDAT TYPE LIKP-LFDAT, " DELIVERY DATE
END OF XT_LIKP.
**STRUCTURE FOR DELIVERY ITEM - LIPS
TYPES: BEGIN OF XT_LIPS,
DELPOSNR TYPE LIPS-POSNR, " DELIVERY ITEM NUMBER
LFIMG TYPE LIPS-LFIMG, " ACTUAL QUANTITY DELIVERED
END OF XT_LIPS.
**STRUCTURE FOR BILLING DOCUMENT HEADER -VBRK
TYPES: BEGIN OF XT_VBRK,
INVVBELN TYPE VBRK-VBELN, "BILLING DOCUMENT NUMBER
END OF XT_VBRK.
**STRUCTURE FOR BILLING DOCUMENT ITEM - VBRP
TYPES: BEGIN OF XT_VBRP,
INVPOSNR TYPE VBRP-POSNR, "BILLING ITEM NUMBER
FKIMG TYPE VBRP-FKIMG, "ACTUAL INVOICED QUANTITY
INVNETWR TYPE VBRP-NETWR, "NET VALUE OF THE BILLING ITEM
END OF XT_VBRP.
**STRUCTURE FOR FINAL INTERNAL TABLE.
TYPES: BEGIN OF XT_FINAL,
VBELN TYPE VBAK-VBELN,
DELVBELN TYPE LIKP-VBELN,
INVBELN TYPE VBRK-VBELN,
KUNNR TYPE VBAK-KUNNR,
POSNR TYPE VBAP-POSNR,
DELPOSNT TYPE LIPS-POSNR,
INVPOSNR TYPE VBRP-POSNR,
MATNR TYPE VBAP-MATNR,
KWMENG TYPE VBAP-KWMENG,
NETWR TYPE VBAP-NETWR,
INVNETWR TYPE VBRP-NETWR,
LFDAT TYPE LIKP-LFDAT,
LFIMG TYPE LIPS-LFIMG,
FKIMG TYPE VBRP-FKIMG,
NAME1 TYPE KNA1-NAME1,
END OF XT_FINAL.
**DATA DECLARATIONS
DATA: V_NAME1 TYPE KNA1-NAME1, "#EC *
V_DELVBELN TYPE LIKP-VBELN,
V_INVVBELN TYPE VBRK-VBELN,
V_BUKRS TYPE T001-BUKRS, "COMPANY CODE "#EC *
V_AUDAT TYPE VBAK-AUDAT,
V_VKORG TYPE VBAK-VKORG,
V_VKGRP TYPE VBAK-VKGRP,
V_SPART TYPE VBAK-SPART.
**INTERNAL TABLE DECLARATIONS
DATA: IT_VBAK TYPE STANDARD TABLE OF XT_VBAK,
WA_VBAK TYPE XT_VBAK,
IT_VBAP TYPE STANDARD TABLE OF XT_VBAP,
WA_VBAP TYPE XT_VBAP,
IT_LIKP TYPE STANDARD TABLE OF XT_LIKP,
WA_LIKP TYPE XT_LIKP,
IT_LIPS TYPE STANDARD TABLE OF XT_LIPS,
WA_LIPS TYPE XT_LIPS,
IT_VBRK TYPE STANDARD TABLE OF XT_VBRK,
WA_VBRK TYPE XT_VBRK,
IT_VBRP TYPE STANDARD TABLE OF XT_VBRP,
WA_VBRP TYPE XT_VBRP,
IT_FINAL TYPE STANDARD TABLE OF XT_FINAL,
WA_FINAL TYPE XT_FINAL.
**ALV DECLARATIONS
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FLDCAT TYPE SLIS_FIELDCAT_ALV,
IT_LSTHDR TYPE SLIS_T_LISTHEADER,
WA_LSTHDR TYPE SLIS_LISTHEADER,
IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: S_BUKRS FOR V_BUKRS NO INTERVALS NO-EXTENSION,
S_VBELN FOR WA_VBAK-VBELN, "SALES DOCUMENT NUMBER
S_KUNNR FOR WA_VBAK-KUNNR, "SOLD-TO-PARTY
S_AUDAT FOR V_AUDAT, "SALES DOCUMENT DATE
S_VKORG FOR V_VKORG, "SALES ORGANISATION
S_VKGRP FOR V_VKGRP, "SALES GROUP
S_SPART FOR V_SPART. "DIVISION
SELECTION-SCREEN END OF BLOCK b1.
*****************SCREEN VALIDATION***************
AT SELECTION-SCREEN.
SELECT SINGLE BUKRS FROM T001 INTO V_BUKRS WHERE BUKRS IN S_BUKRS."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID COMPANY CODE'.
ENDIF.
SELECT SINGLE VBELN FROM VBAK INTO
CORRESPONDING FIELDS OF WA_VBAK WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER VALID SALES DOCUMENT NUMBER'.
ENDIF.
SELECT SINGLE KUNNR FROM VBAK INTO
CORRESPONDING FIELDS OF WA_VBAK WHERE KUNNR IN S_KUNNR. "EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID CUSTOMER NUMBER'.
ENDIF.
SELECT SINGLE AUDAT FROM VBAK INTO V_AUDAT WHERE AUDAT IN S_AUDAT."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DOCUMENT DATE'.
ENDIF.
SELECT SINGLE VKORG FROM VBAK INTO V_VKORG WHERE VKORG IN S_VKORG."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES ORGANISATION'.
ENDIF.
SELECT SINGLE VKGRP FROM VBAK INTO V_VKGRP WHERE VKGRP IN S_VKGRP."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES GROUP'.
ENDIF.
SELECT SINGLE SPART FROM VBAK INTO V_SPART WHERE SPART IN S_SPART."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DIVISION'.
ENDIF.
PERFORM GET_DATA.
*& Form GET_DATA
FORM GET_DATA .
SELECT VBELN KUNNR
INTO TABLE IT_VBAK
FROM VBAK
WHERE VBELN IN S_VBELN.
* BUKRS_VF IN S_BUKRS AND
* VKORG IN S_VKORG AND
* VKGRP IN S_VKGRP AND
* SPART IN S_SPART AND
* KUNNR IN S_KUNNR AND
* AUDAT IN S_AUDAT.
IF IT_VBAK[] IS NOT INITIAL.
SELECT POSNR MATNR KWMENG NETWR
INTO TABLE IT_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAK[] IS NOT INITIAL.
SELECT VBELN LFDAT
INTO TABLE IT_LIKP
FROM LIKP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT POSNR LFIMG
INTO TABLE IT_LIPS
FROM LIPS
FOR ALL ENTRIES IN IT_VBAP
WHERE POSNR = IT_VBAP-POSNR.
ENDIF.
IF IT_LIKP[] IS NOT INITIAL.
SELECT VBELN
INTO TABLE IT_VBRK
FROM VBRK
FOR ALL ENTRIES IN IT_LIKP
WHERE VBELN = IT_LIKP-DELVBELN.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT POSNR FKIMG NETWR
INTO TABLE IT_VBRP
FROM VBRP
FOR ALL ENTRIES IN IT_LIPS
WHERE POSNR = IT_LIPS-DELPOSNR.
ENDIF.
ENDFORM. " GET_DATA
Edited by: srk s on Jan 29, 2008 7:33 PM
Edited by: Alvaro Tejada Galindo on Jan 29, 2008 9:49 AMHi Satish,
I have started the new program but i have trouble with the final internal table. Since i'm using For all entries, I have declared internal tables for each table. My incomplete new program is as follows(not sure if the logic is correct till what I have coded):
*& Report Z_SDFLOW *
REPORT Z_SDFLOW NO STANDARD PAGE HEADING.
********* TABLES TO BE USED ***********************
**** VBAK - SALES DOCUMENT HEADER
* VBAP - SALES ITEM
* VBFA - SALES DOCUMENT FLOW
* KNA1- CUSTOMER MASTER
* VBRK - BILLING DOCUMENT HEADER
* VBRP - BLLING DOCUMENT ITEM
* LIKP - DELIVERY HEADER
* LIPS - DELIVERY ITEM
* TOO1 - COMPANY CODES
* SLIS.
TYPE-POOLS: SLIS.
** STRUCTURE DECLARATIONS ********
**STRUCTURE FOR ENQUIRY.
**STRUCTURE FOR QUOTATION.
**STRUCTURE FOR SALES ORDER HEADER- VBAK.
TYPES: BEGIN OF XT_VBAK,
VBELN TYPE VBAK-VBELN, "SALES DOCUMENT NUMBER
KUNNR TYPE VBAK-KUNNR, " SOLD-TO-PARTY
END OF XT_VBAK.
**STRUCTURE FOR SALES ORDER ITEM-VBAP
TYPES: BEGIN OF XT_VBAP,
POSNR TYPE VBAP-POSNR, " SALES ITEM NUMBER
MATNR TYPE VBAP-MATNR, " MATERIAL NUMBER
KWMENG TYPE VBAP-KWMENG, " CUMMULATIVE ORDER QUANTITY IN SALES UNITS
NETWR TYPE VBAP-NETWR, " NET VALUE OF THE ORDER ITEM
END OF XT_VBAP.
** STRUCTURE FOR DELIVERY HEADER -LIKP
TYPES: BEGIN OF XT_LIKP,
DELVBELN TYPE LIKP-VBELN, "DELIVERY DOCUMENT NUMBER
LFDAT TYPE LIKP-LFDAT, " DELIVERY DATE
END OF XT_LIKP.
**STRUCTURE FOR DELIVERY ITEM - LIPS
TYPES: BEGIN OF XT_LIPS,
DELPOSNR TYPE LIPS-POSNR, " DELIVERY ITEM NUMBER
LFIMG TYPE LIPS-LFIMG, " ACTUAL QUANTITY DELIVERED
END OF XT_LIPS.
**STRUCTURE FOR BILLING DOCUMENT HEADER -VBRK
TYPES: BEGIN OF XT_VBRK,
INVVBELN TYPE VBRK-VBELN, "BILLING DOCUMENT NUMBER
END OF XT_VBRK.
**STRUCTURE FOR BILLING DOCUMENT ITEM - VBRP
TYPES: BEGIN OF XT_VBRP,
INVPOSNR TYPE VBRP-POSNR, "BILLING ITEM NUMBER
FKIMG TYPE VBRP-FKIMG, "ACTUAL INVOICED QUANTITY
INVNETWR TYPE VBRP-NETWR, "NET VALUE OF THE BILLING ITEM
END OF XT_VBRP.
**STRUCTURE FOR FINAL INTERNAL TABLE.
TYPES: BEGIN OF XT_FINAL,
VBELN TYPE VBAK-VBELN,
DELVBELN TYPE LIKP-VBELN,
INVBELN TYPE VBRK-VBELN,
KUNNR TYPE VBAK-KUNNR,
POSNR TYPE VBAP-POSNR,
DELPOSNT TYPE LIPS-POSNR,
INVPOSNR TYPE VBRP-POSNR,
MATNR TYPE VBAP-MATNR,
KWMENG TYPE VBAP-KWMENG,
NETWR TYPE VBAP-NETWR,
INVNETWR TYPE VBRP-NETWR,
LFDAT TYPE LIKP-LFDAT,
LFIMG TYPE LIPS-LFIMG,
FKIMG TYPE VBRP-FKIMG,
NAME1 TYPE KNA1-NAME1,
END OF XT_FINAL.
**DATA DECLARATIONS
DATA: V_NAME1 TYPE KNA1-NAME1, "#EC *
V_DELVBELN TYPE LIKP-VBELN,
V_INVVBELN TYPE VBRK-VBELN,
V_BUKRS TYPE T001-BUKRS, "COMPANY CODE "#EC *
V_AUDAT TYPE VBAK-AUDAT,
V_VKORG TYPE VBAK-VKORG,
V_VKGRP TYPE VBAK-VKGRP,
V_SPART TYPE VBAK-SPART.
**INTERNAL TABLE DECLARATIONS
DATA: IT_VBAK TYPE STANDARD TABLE OF XT_VBAK,
WA_VBAK TYPE XT_VBAK,
IT_VBAP TYPE STANDARD TABLE OF XT_VBAP,
WA_VBAP TYPE XT_VBAP,
IT_LIKP TYPE STANDARD TABLE OF XT_LIKP,
WA_LIKP TYPE XT_LIKP,
IT_LIPS TYPE STANDARD TABLE OF XT_LIPS,
WA_LIPS TYPE XT_LIPS,
IT_VBRK TYPE STANDARD TABLE OF XT_VBRK,
WA_VBRK TYPE XT_VBRK,
IT_VBRP TYPE STANDARD TABLE OF XT_VBRP,
WA_VBRP TYPE XT_VBRP,
IT_FINAL TYPE STANDARD TABLE OF XT_FINAL,
WA_FINAL TYPE XT_FINAL.
**ALV DECLARATIONS
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FLDCAT TYPE SLIS_FIELDCAT_ALV,
IT_LSTHDR TYPE SLIS_T_LISTHEADER,
WA_LSTHDR TYPE SLIS_LISTHEADER,
IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: S_BUKRS FOR V_BUKRS NO INTERVALS NO-EXTENSION,
S_VBELN FOR WA_VBAK-VBELN, "SALES DOCUMENT NUMBER
S_KUNNR FOR WA_VBAK-KUNNR, "SOLD-TO-PARTY
S_AUDAT FOR V_AUDAT, "SALES DOCUMENT DATE
S_VKORG FOR V_VKORG, "SALES ORGANISATION
S_VKGRP FOR V_VKGRP, "SALES GROUP
S_SPART FOR V_SPART. "DIVISION
SELECTION-SCREEN END OF BLOCK b1.
*****************SCREEN VALIDATION***************
AT SELECTION-SCREEN.
SELECT SINGLE BUKRS FROM T001 INTO V_BUKRS WHERE BUKRS IN S_BUKRS."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID COMPANY CODE'.
ENDIF.
SELECT SINGLE VBELN FROM VBAK INTO
CORRESPONDING FIELDS OF WA_VBAK WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER VALID SALES DOCUMENT NUMBER'.
ENDIF.
SELECT SINGLE KUNNR FROM VBAK INTO
CORRESPONDING FIELDS OF WA_VBAK WHERE KUNNR IN S_KUNNR. "EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID CUSTOMER NUMBER'.
ENDIF.
SELECT SINGLE AUDAT FROM VBAK INTO V_AUDAT WHERE AUDAT IN S_AUDAT."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DOCUMENT DATE'.
ENDIF.
SELECT SINGLE VKORG FROM VBAK INTO V_VKORG WHERE VKORG IN S_VKORG."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES ORGANISATION'.
ENDIF.
SELECT SINGLE VKGRP FROM VBAK INTO V_VKGRP WHERE VKGRP IN S_VKGRP."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES GROUP'.
ENDIF.
SELECT SINGLE SPART FROM VBAK INTO V_SPART WHERE SPART IN S_SPART."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DIVISION'.
ENDIF.
PERFORM GET_DATA.
*& Form GET_DATA
FORM GET_DATA .
SELECT VBELN KUNNR
INTO TABLE IT_VBAK
FROM VBAK
WHERE VBELN IN S_VBELN.
* BUKRS_VF IN S_BUKRS AND
* VKORG IN S_VKORG AND
* VKGRP IN S_VKGRP AND
* SPART IN S_SPART AND
* KUNNR IN S_KUNNR AND
* AUDAT IN S_AUDAT.
IF IT_VBAK[] IS NOT INITIAL.
SELECT POSNR MATNR KWMENG NETWR
INTO TABLE IT_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAK[] IS NOT INITIAL.
SELECT VBELN LFDAT
INTO TABLE IT_LIKP
FROM LIKP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT POSNR LFIMG
INTO TABLE IT_LIPS
FROM LIPS
FOR ALL ENTRIES IN IT_VBAP
WHERE POSNR = IT_VBAP-POSNR.
ENDIF.
IF IT_LIKP[] IS NOT INITIAL.
SELECT VBELN
INTO TABLE IT_VBRK
FROM VBRK
FOR ALL ENTRIES IN IT_LIKP
WHERE VBELN = IT_LIKP-DELVBELN.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT POSNR FKIMG NETWR
INTO TABLE IT_VBRP
FROM VBRP
FOR ALL ENTRIES IN IT_LIPS
WHERE POSNR = IT_LIPS-DELPOSNR.
ENDIF.
ENDFORM. " GET_DATA
Code Formatted by: Alvaro Tejada Galindo on Jan 29, 2008 9:48 AM -
How to restrict field of BSEG using for all entries in
Hi All,
i want restrict field BSEG-UMSKZ by using for all entries in but facing some problem.can someone tell me how to use with example.If you want to see my Query is this.
SELECT: bkpf~belnr
with_item~buzei
bkpf~blart
with_item~wt_acco AS lifnr
lfa1~name1
lfa1~stras
lfa1~ort01
lfa1~stcd2 AS lifntn
lfa1~stcd1 AS lifnic
bkpf~budat
wt_qsshb AS dmbtr
qsatz
witht
wt_withcd
wt_qbshb
hkont
with_item~wt_wtexmn
INTO CORRESPONDING FIELDS
OF TABLE gi_accdocs
FROM bkpf
JOIN with_item
ON ( with_itembukrs = bkpfbukrs AND
with_itembelnr = bkpfbelnr AND
with_itemgjahr = bkpfgjahr )
JOIN lfa1
ON ( lfa1lifnr = with_itemwt_acco )
WHERE bkpf~bukrs EQ p_bukrs AND
bkpf~gjahr EQ p_gjahr AND
bkpf~budat IN s_budat AND
bkpf~stblg EQ space AND
wt_withcd IN s_withcd AND
with_item~wt_acco IN s_lifnr AND
with_item~hkont IN s_hkont AND
bkpf~belnr IN s_belnr.
Thanks & Regards,hi,
this is the whole coding with FOR ALL ENTRIES:
SELECT: bkpf~belnr
with_item~buzei
bkpf~blart
with_item~wt_acco AS lifnr
lfa1~name1
lfa1~stras
lfa1~ort01
lfa1~stcd2 AS lifntn
lfa1~stcd1 AS lifnic
bkpf~budat
wt_qsshb AS dmbtr
qsatz
witht
wt_withcd
wt_qbshb
hkont
with_item~wt_wtexmn
INTO CORRESPONDING FIELDS
OF TABLE gi_accdocs
FROM bkpf
JOIN with_item
ON ( with_itembukrs = bkpfbukrs AND
with_itembelnr = bkpfbelnr AND
with_itemgjahr = bkpfgjahr )
JOIN lfa1
ON ( lfa1lifnr = with_itemwt_acco )
WHERE bkpf~bukrs EQ p_bukrs AND
bkpf~gjahr EQ p_gjahr AND
bkpf~budat IN s_budat AND
bkpf~stblg EQ space AND
wt_withcd IN s_withcd AND
with_item~wt_acco IN s_lifnr AND
with_item~hkont IN s_hkont AND
bkpf~belnr IN s_belnr.
SELECT UMSKZ
from BSEG
INTO CORRESPONDING FIELDS OF TABLE gi_amount
FOR ALL ENTRIES IN GI_MAIN
WHERE UMSKZ NE 'F'.
Thanks & Regards. -
How can i write the below code using "For all entries"
Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.Hi,
SELECT objnr objid aufnr
from afih
into table t_afih.
SELECT objnr
from JEST
into table t_JEST
where stat = 'A0045'
OR stat = 'A0046'
AND inact 'X'.
SELECT objnr
from COBRB
into table t_cobrb.
SELECT arbpl werks objid objty
from crhd
INTO table it_crhd
FOR ALL ENTRIES IN it_afih
WHERE objty eq 'D'
AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
FROM caufv
INTO table t_caufv
FOR ALL ENTRIES IN it_afih
WHERE aufnr = it_afih-aufnr
And pspel = ' '
AND txjcd = ' '
ANd objnr ne it_crhd-objnr
AND auart in s_wtype
AND werks in s_plant.
AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
if if t_caufv-objnr ne it_jest-objnr.
(proceed further).
endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu -
I have a problem in using for all entries
Hi i have a problem in using <b>for all entries</b>
i have declared the two internal tables as below
DATA: BEGIN OF ITAB OCCURS 10,
EBELN LIKE EKKO-EBELN,
LIFNR LIKE EKKO-LIFNR,
EBELP LIKE EKBE-EBELP,
BELNR LIKE EKBE-BELNR,
* MATNR LIKE EKPO-MATNR,
* TXZ01 LIKE EKPO-TXZ01,
VGABE LIKE EKBE-VGABE,
GJAHR LIKE EKBE-GJAHR,
KNUMV LIKE EKKO-KNUMV,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 10,
EBELN LIKE EKPO-EBELN,
MATNR LIKE EKPO-MATNR,
TXZ01 LIKE EKPO-TXZ01,
WERKS LIKE EKPO-WERKS,
NETWR LIKE EKPO-NETWR,
MENGE LIKE EKPO-MENGE,
MWSKZ LIKE EKPO-MWSKZ,
LIFNR LIKE EKKO-LIFNR,
EBELP LIKE EKBE-EBELP,
BELNR LIKE EKBE-BELNR,
END OF ITAB1.
<b>and now i have tried to move the values in those internal tables using these statements</b>
SELECT A~EBELN A~LIFNR A~KNUMV B~VGABE B~EBELP B~GJAHR B~BELNR
FROM EKKO AS A
INNER JOIN EKBE AS B ON B~EBELN = A~EBELN
INTO CORRESPONDING
FIELDS OF TABLE ITAB WHERE B~VGABE = '2'.
SELECT EKPO~EBELN EKPO~MATNR EKPO~TXZ01 EKPO~WERKS EKPO~NETWR
EKPO~MENGE EKPO~MWSKZ
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FOR ALL ENTRIES IN ITAB
WHERE EBELN = ITAB-EBELN.
LOOP AT ITAB1.
READ TABLE ITAB WITH KEY EBELN = ITAB-EBELN.
ITAB-EBELN = ITAB1-EBELN.
ITAB1-LIFNR = ITAB-LIFNR.
ITAB1-EBELP = ITAB-EBELP.
ITAB1-BELNR = ITAB-BELNR.
ITAB1-EBELP = ITAB-EBELP.
APPEND ITAB1.
ENDLOOP.
But when i was using loop then it was displaying values in debugging mode but while i was trying to execute it was taking a lot of time i thought that it was due to more information in the already declared internal table so i have tried to remove the previous entries but it was showing an error while i was removing the old entries
and when i remove the loop at itab1 then i'll get output directly but it was displaying the itab fields which is my 1st internal table but not the values of itab1 can u explain me what is the possible error for that
Regards ,
Pavanbefore using for all entries in, u need to check whether the driver internal table is empty, if it is empty, u should not enter into select statement.
if u wont use this check means, when the driver internal table is empty, the second select will take all the entires from the tables.
SELECT AEBELN ALIFNR AKNUMV BVGABE BEBELP BGJAHR B~BELNR
FROM EKKO AS A
INNER JOIN EKBE AS B ON BEBELN = AEBELN
INTO CORRESPONDING
FIELDS OF TABLE ITAB WHERE B~VGABE = '2'.
if itab[] is not initial.
SELECT EKPOEBELN EKPOMATNR EKPOTXZ01 EKPOWERKS EKPO~NETWR
EKPOMENGE EKPOMWSKZ
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FOR ALL ENTRIES IN ITAB
WHERE EBELN = ITAB-EBELN.
endif.
I hope this will help u.
else,
Sujatha. -
Is it not recommended to use FOR ALL ENTRIES in version 4.5B
Hi,
Is it not recommended to used For all entries in version 4.5B as Size limit for SQL is 32KB hence we should not be using FOR ALL ENTRIES, instead of this we should be using select inside the loop?
Can anyone please let me know if this is correct and if you can provide me the SAP documentation on the specific statement.
Regards
RiaHi Ria,
From what I understand, you cannot use JOINS with FOR ALL ENTRIES in 4.5b & lower versions. In general the SELECT..FOR ALL ENTRIES statement has been in use from 3.1i versions. For more information, PL take a look at OSS Note #652634.
Regards,
Suresh Datti -
Regarding Select using FOR ALL ENTRIES (FAEI)
Hi all,
Please help me with Select using FOR ALL ENTRIES (FAEI)
Thanks in advns,
Das.Hi,
This version of the SELECT statement was the only way to join tables until SAP release 3.0E. It is recommended that the SQL JOIN be used. However, this is an alternate method of joining tables that may be used in some circumstances. Remember, SQL JOIN doesnt utilize the SAP internal database buffer.
Example:
SELECT EKGRP FROM T024
INTO TABLE T_024.
SELECT MATNR WERKS EKGRP FROM MARC
INTO TABLE T_MARC
FOR ALL ENTRIES IN T_024
WHERE EKGRP = T_024-EKGRP.
Prerequisites:
The driver table cannot be empty. This would cause one full table scan.
In general, keep the driver table as small and unique (in regards to the fields that would be needed for referencing in the FAEI) as possible. If duplicate entries are not deleted, identical data is read unnecessarily from the database.
If FAEI is used, the selected field list must be a superset of all the key fields of the database tables used in SQL. This is absolutely required to avoid data loss since the DB interface in R/3 returns unique sets of the result set to the application program. Failing to ensure this may cause problems when you want to get all records from a database table that match a certain condition.
Avoid using FAEI on a small DB table (like configuration tables). This could potentially cause full table scans for each FAEI packet. Even if it does index range scan, it is better to get data from the small DB tables by individual SELECT without the use of FAE.
Always use FAEI in conjunction with a DB index otherwise it would cause multiple full table scans (one table scan for each FAEI packet).
The first field(s) of the DB index should refer to the fields of the FAEI driver table in the SQL WHERE clause. Do not leave gaps between index fields in the WHERE clause. Inefficient index access will impact every FAEI packets.
FAEI works best when retrieving a small percentage of data from a Database table. When a large percentage of data is needed, consider getting data out of the DB table without FAEI implementation, and then do additional filtration in your application
Reward points if found helpfull...
Cheers,
Chandra Sekhar. -
Performance on Select Single&Write AND Select*(For All Entries)&Read&Write
Hi Experts,
I got a code review problem & we are in a argument.
I need the best performance code out of this two codes. I have tested this both on 5 & 1000 & 3000 & 100,000 & 180,000 records.
But still, I just need a second opinion of experts.
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
DATA : g_txt50 TYPE skat-txt50.
DATA : g_it_skat TYPE TABLE OF skat, g_wa_skat LIKE LINE OF g_it_skat.
DATA : g_it_account TYPE TABLE OF ty_account, g_wa_account LIKE LINE OF g_it_account.
Code 1.
SELECT saknr INTO TABLE g_it_account FROM skat.
LOOP AT g_it_account INTO g_wa_account.
SELECT SINGLE txt50 INTO g_txt50 FROM skat
WHERE spras = 'E'
AND ktopl = 'XXXX'
AND saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_txt50.
CLEAR : g_wa_account, g_txt50.
ENDLOOP.
Code 2.
SELECT saknr INTO TABLE g_it_account FROM skat.
SELECT * INTO TABLE g_it_skat FROM skat
FOR ALL ENTRIES IN g_it_account
WHERE spras = 'E'
AND ktopl = 'XXXX'
AND saknr = g_it_account-saknr.
LOOP AT g_it_account INTO g_wa_account.
READ TABLE g_it_skat INTO g_wa_skat WITH KEY saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_wa_skat-txt50.
CLEAR : g_wa_account, g_wa_skat.
ENDLOOP.
Thanks & Regards,
Dileep .CHi Dilip.
from you both the code I have found that you are selecting 2 diffrent fields.
In Code 1.
you are selecting SAKNR and then for these SAKNR you are selecting TXT50 from the same table.
and in Code 2 you are selecting all the fields from SAKT table for all the values of SAKNR.
I don't know whats your requirement.
Better you declare a select option on screen and then fetch required fields from SAKT table for the values entered on screen for SAKNR.
you only need TXT50 and SAKNR fields.
so declare two types one for SAKNR and another for TXT50.
Points to be remember.
1. while using for all entries always check the for all entries table should not be blank.
2. you will have to fetch all the key fields in table while applying for all entries,
you can compare key fields with a constant which is greater than initial value.
3. while reading the table sort the table by the field on which you are going to read it.
try this:
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
TYPES : begin of T_txt50,
saknr type saknr,
txt50 type txt50,
end of t_txt50.
DATA: i_account type table of t_account,
w_account type t_account,
i_txt50 type table t_txt50,
w_txt50 type t_txt50.
select SAKNR from SKAT into table i_account.
if sy-subrc = 0.
sort i_account by saknr.
select saknr txt50 from SKAT into table i_txt50
for all entries in i_account
where SAKNR = i_account-SAKNR
here mention al the primary keys and compare them with their constants.
endif.
Note; here you need to take care that, you will have to fetch all the key fields in table i_txt50.
and compare those fields with there constants which should be greater than initial values.
they should be in proper sequence.
now for writing.
loop at i_account into w_account.
clear w_txt50.
sort i_txt50 by saknr.
read table i_txt50 into w_txt50 with key SAKNR = w_account-saknr
if sy-subrc = 0.
write: w_txt50-saknr, w-txt50-txt50.
clear w_txt50, w_account.
endif.
endloop.
Hope it wil clear your doubts.
Thanks
Lalit -
Selecting single value using for all entries.
Hi Experts,
I want to know that is it possible to fetch only the first record for a particular condition while using for all entries.
For ex:
Suppose i got 10 different vbeln from vbak table into my internal table it_vbak. For a particular vbeln there can be multiple records in vbap table.
Now i need to fetch only the first record which is getting from vbap table for different vbeln while using 'for all entries in it_vbak where vbeln = it_vbak-vbeln'. Is it possible?
Thanks in Advance
Be$t!N
Moderator message - Moved to the correct forum
Edited by: Rob Burbank on Nov 17, 2009 9:38 AMHi Rob Burbank,
Thanks..
You are correct.. If that is the scenario in their company... Again it depends on the configuration and business process.. But it's possible that they may need to delete first on any line item after creation of sale order..
In that case below solution will work..
IF IT_VBAK[] IS NOT INITIAL.
SELECT * FROM VBAP
INTO TABLE IT_VBAP
for all entries in it_vbak
where vbeln = it_vbak-vbeln.
ENDIF.
SORT IT_VBAP BY VBELN POSNR.
LOOP AT IT_VBAK INTO WA_VBAK.
READ TABLE IT_VBAP INTO WA_VBAP WITH KEY VBELN = WA_VBAK-VBELN.
IF SY-SUBRC = 0.
APPEND WA_VBAP TO IT_VBAP2. " Another Internal table which stores only first record
ENDIF.
CLEAR : WA_VBAP.
ENDLOOP.
OR
IT_VBAP3[] = IT_VBAP[].
SORT IT_VBAP3 BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM IT_VBAP3 COMPARING VBELN.
Now Table IT_VBAP2 and IT_VBAP3 will be having only first line items for all sales orders..
Do some little changes in the code as per your requirement.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Populating Empty Fields for Existing Internal Table Using For All Entries
I have an internal table called itab_extract that populates without any issues in SELECT A and SELECT B below. Trying to avoid looping, I am using select DB table 'for all entries' in itab_extract. I want the empty fields in itab_extract to populate from the values in the database. However, about 200,000 entries are being appended to the table, and, the values that existed for the already populated fields in itab_extract are gone, and the new fields are populated.
I've played with the syntax and cannot seem to get it to work. My next option is a time consuming loop.
How should the for all entries syntax look to accomplish filling the empty fields in the itab? Thank-You
*read ekko
select ebeln lifnr aedat bsart from ekko *SELECT A*
into CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in r_aedat.
select ebeln lifnr aedat BSART from ekko *SELECT B*
appending CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in S_DATE2 AND
BSART IN S_BSART.
select ebelp werks matnr *SELECT C*
into CORRESPONDING FIELDS OF TABLE itab_extract
from ekpo
FOR ALL ENTRIES IN itab_extract
where ebeln = itab_extract-ebeln.Hi Tom,
This SQL statement will be time consuming, Do not use a loop.
There are two options.
1. Select EKKO and EKPO details based on standard SAP view. (You can type EKKO in se11 view to find the correct view).
also use one range table populate r_aedat and s_date2 in the same. So you where condition will have r_newrange and
s_bsart. Also do not use into corresponding fields, it is not a good idea. It will increase your performance. Maintain the proper
sequence (Based on database structure of EKKO and EKPO)
2. If you are keen to use for all entries, then first select ekko then after your sy-subrc check get the data from EKPO.
Should be like this.
select ebeln bsart aedat lifnr from ekko into table gt_ekko where aedat in r_newrange and bsart in s_bsart.
if sy-subrc eq 0.
sort gt_ekko by ebeln ascending.
select ebeln ebelp werks matnr into table gt_ekpo for all entries in gt_ekko where ebeln eq gt_ekko-ebeln.
endif.
Hope it helps,
Best Regards,
Tapodipta Khan.
Maybe you are looking for
-
My MacBook Pro (mid-2010) suddenly stopped working when I was overseas, but I managed to fix it when I returned back to the States after I reformatted and erased the disk, then installed Yosemite. I lost most of my files but didn't really care, thoug
-
What is the significance of the percent and dimensions in the lower-left of the PSE9 screen?
I have a picture on my screen. It measures about 9 1/2" by 6". How do these numbers relate to each other, and why am I involved with something that measures about 4 feet by 2 1/2 feet? Is it that size based solely on the pixel setting on the came
-
Since Lion installation the remote control first generation, doesn't work as usually. On Leopard when I pushed the menu button, it opened a menu that showed Front Row. Now it doesn't work anymore. Is there anyone to explain me why this happen or is t
-
How to start apache which embeded in oracle
hi, i run the following command under the root priviledge: $ORACLE_HOME/Apache/Apache/bin/apachectl start. but, the server said: ./apachectl start: httpd could not be started what is the reason? when i first install the o8i, the web server is alive(
-
Forecast Consumption in SNP for shipped qty's
Hello experts, I got a question for forecast consumption in SNP and whether forecast stays "consumed" or not after a customer orders gets shipped (Post Goods Issue). My example is: I have a weekly bucket forecast qty of 100 in DP and release this to