Joning a wireless with Time Capsule

Hello,
I currently have a Linksys WAP4410N in place on my network and I already have a firewall in place as well. So what I am trying to do is have my time capsule join my existing wireless network and I am having issues. I go through the wizard and do everything it says and then the time capsule reboots and has a steady flashing amber light and then the airport utility says that it cannot find it. I then reset the Time Capsule and go through the process again only to acheive the same dismal results. My WAP is set up to use WPA2 Personal/Mixed and it is running in b/g/n mode on channell 11. I am almost at wits end, please help!

iluvwindoze wrote:
Hello,
howdy and welcome to the discussion area !
I currently have a Linksys WAP4410N in place on my network and I already have a firewall in place as well. So what I am trying to do is have my time capsule join my existing wireless network and I am having issues. I go through the wizard and do everything it says and then the time capsule reboots and has a steady flashing amber light and then the airport utility says that it cannot find it. I then reset the Time Capsule and go through the process again only to acheive the same dismal results. My WAP is set up to use WPA2 Personal/Mixed and it is running in b/g/n mode on channell 11. I am almost at wits end, please help!
i assume you're trying to connetct linksys and TC wirelessly ? i don't think that will work but you could run an ethernet cable from one of the LAN ports of the linksys to the WAN port of your TC and set the TC up in bridge mode.
post back if you need further advice
good luck

Similar Messages

  • Setting up new HP Laserjet CP1525nw wirelessly with Time Capsule

    Im having issues setting up my new HP Laser printer via wirelessly with Time Capsule. I have tried with the Wireless Client Setup
    Assistant but cannot get it to work. Any help or suggestions would be appreciated. Thanks

    I tried to get the CP1525nw set up on my computer here at the office and found, much to my chagrin, that the CP1525 is not supported under 10.7 and retroactively not supported under 10.6. The way that I have found to get around the issue is to connect it wirelessly via a static IP address and use a generic postscript driver. I'm hoping that they will release a driver to Apple soon, but until then, generic is the only way to go and I have not found any print quality issues.

  • Why can't I print wireless with Time Capsule anymore?

    I have an Epson Stylus Photo 1280 that I have been printing wireless with for many years by plugging it in to the USB port on the back of the Time Capsule. Not anymore.
    I have a MacBook Pro running the latest OS as well as the latest model Time Capsule running the latest software from Apple. I have tried using Airport Utility 5.6 which sees the printer plugged in. But when I try to add the printer to the Print & Scan system preferences, it shows up but says:
    Software for this printer is available from Apple. Would you like to download and install it?
    When I click "Download and Install" it searches for the software but then tells me:
    The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.
    When I plug the printer directly into my MBP, I can add the printer and print without any problems.  Per Epson, I have the latest software for my printer, so I'm not sure why Apple needs to search for the software and download it in order for me to print using the Time Capsule.
    Like I said before, this all use to work flawlessly. I'm assuming all the updates have "broken" something.
    Thanks in advance for any help and suggestions.

    Well, I solved my problem.
    I deleted the EPSON folder in Library/Printers as well as Library/Cache and installed the EPSON driver via Softwar Update.
    Everything is working fine now.

  • Scanning wirelessly with Time Capsule

    I set-up my HP All-in-One Printer to print wirelessly from my computer using Time Capsule, however, I've been unable to figure out how to scan documents from the printer.  Does Time Capsule support scanning wirelessly???  If it does, how do I set-up the scanner???

    Does Time Capsule support scanning wirelessly???
    Is your All-in-One connected to the Time Capsule using the USB port, or is it connecting using wireless only?
    If USB, it is a matter of opinion as to who supports what.  HP has not provided full function drivers that would allow advanced features like scan, copy, maintenance, etc when the device is connected to a USB port on a router. Only the print function is supported.
    Apple can only provide the drivers that they get from the printer manufacturers. HP might have a full function driver available on their support site, so that might be worth checking. Or, they may be able to confirm a time when they do expect to be able to offer full functionality.

  • Wireless comm problem with time capsule or airport extreme using iMac G5

    I did buy a Time Capsule and an iMac 20" G5 January 2009...Installed all the components and created a wireless network...MacBook, iPhone and iPod Touch connected perfectly...iMac connected but started to drop communications with Time Capsule...Safari, iTunes and other internet-access programs had problems to connect 100% with the web...After reviewing all the post here and "testing/trying" several parameters, I found out that you need to define a WPA/WPA2 password protection with more than 13 characters...FYI, Time capsule is configured using 802.11n (b/g compatible)...

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • How to Sync iPhone/iPad with Time Capsule (wirelessly)

    Hi - I am wondering if there is way to sync my iPhone or iDevices with Time Capsule wirelessly.  Please let me know if there is and how?
    Thanks in advance..

    The iOS devices....iPhones, iPads, iPods, etc.....sync to iTunes on your computer or to iCloud.
    See this Apple support document:
    http://support.apple.com/kb/ht1766
    It is not possible to sync iOS devices directly to the Time Capsule.

  • How can i extend a wireless network with time capsule

    How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

    How can i extend an existing wifi verizon wireless network with time capsule?
    It all depends on what you mean by "extend".
    If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
    If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
    Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
    This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

  • I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

    I am using macbook air and thrying to print wireless over time capsule with a lexmark 5600/6600 series, i can print test page but only this. Anyone can help?

    Check here, if this can help:
    http://support.apple.com/kb/HT4670?viewlocale=en_US

  • Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

    Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

    Plug a NAS into the BT Hub that does TM. Look at Synology.
    You just use the wireless of the hub.
    But the cheapest solution is still the TC.

  • Wireless printing with time capsule 1tb and new wireless all in one printer

    I am having problems with printing wirelessly from my time capsule 1tb. I currently have a hp 5510v office all in one printer and drivers can not be found to support printing wirelessly however it can print via usb. What I need is help in picking out a new all in one printer that can print wirelessly from time capsule 1tb. Please help

    Hi,
    my hp photosmart C6180 all in one works flawlessly with it plugged in to my time capsule all functions.
    I used to have it set up using it wirelessly from the printer however for some reason after a update (i think) it stopped working & would not print so had to plug in to time capsule.
    Dave

  • Problem w/ wireless range with Time Capsule

    Recently set up Time Capsule to swap out my Airport next to my Imac. Also have an Airport Express set up in another room to help extend wireless range. Found now that the range with Time Capsule is not as good as the Airport setup and I can't use my Ipad in the bedrooms furthest away from the Time Capsule. I'm not very tech saavy but would appreciate any suggestions? Thx.

    When you set up TimeCapsule did you create a closed network? With a closed network, airport doesn't broadcast the network name, you have to manually enter it to join. This might be your problem. To fix it (or to see if that's what you've done) run Airport Utility and select manual setup. Select the Wireless tab and then click on the Wireless Options button at the bottom of the window.

  • Creating wireless network with Time Capsule

    hi, I just have couple of questions before installing the time capsule;
    so far I have been using cable DSL modem, so my question is - is it possible to set time capsule as a wireless router, or does time capsule still have to be connected with DSL modem and then act wiresly with iMac?
    I was thinking if i could replace cable DSL modem with time capsule
    thank you

    The Time Capsule has to be connected to your DSL modem. Otherwise you won't be able to connect to internet.

  • How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

    How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?  I have an ISP provided wireless Router that has to remain as the base station.  I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

    One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

  • Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

    Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
    Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
    I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme.  I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

    I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
    Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
    The keys to having a successful roaming network are as follows:
    The routers must be interconnected by Ethernet.
    Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
    The TC MUST be reconfigured as a bridge.
    Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
    The basic steps are:
    Power-down the Winstream.
    Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
    Connect the TC to the Winstream using an Ethernet cable.
    Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
    Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
    Connect your computer to the Winstream's Wi-Fi network.
    Run the AirPort Utility. select the TC, and then, select Edit.
    Go to the Network tab.
    Change the Router Mode option to: Off (Bridge Mode)
    Select the Wireless tab.
    Verify that the Network Mode option is set to: Create a wireless network
    For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
    For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
    For Wireless Password, enter the same password used by the Winstream.
    Select Update and allow the TC to restart.
    As far as your external HD, yes you should still be able to use it as before.

  • A series of problems with Time Capsule

    I was an early adopter of Apple's "Time Capsule," which in theory sounds like a great idea but has been a disaster for me in practice. This is the story of my nightmare.
    In theory, Time Capsule is supposed to enable wireless, automatic backups of my hard drive via wifi. I liked the idea because I thought it would save me time and make backups so convenient that they'd be sure to happen.
    In practice, it's been slow, aggravating and buggy as ****.
    After I bought the device, I brought it home and set it up to do the initial backup of my laptop computer. My first mistake, as I learned later, was to try to do the initial backup wirelessly. The Time Capsule has an Ethernet connection that works faster than the wireless connection. (It ought to have a USB or Firewire port, which would be far faster than Ethernet, but apparently the Apple gods decided to save a nickle at the expense of quality and convenience.) It would also have been nice if the manual that came with the thing recommended using Ethernet for the initial backup, but it didn't, so I didn't discover that this was even an option until I had already wasted several days.
    Yes, days. Not hours, but days.
    I started the initial backup on a Wednesday night. My laptop's hard drive had about 130 gigabytes of files on it, and after the initial backup had run for a couple of hours, I did a calculation based on megabytes/minute and figured that it should finish up sometime that weekend. This meant that I couldn't take my laptop away from the house or turn it off, but after I'd already invested a few hours in the process, I figured I'd just let it run until completed.
    Unfortunately, the longer the backup proceeded, the slower the megabytes/minute rate became. By the following Monday morning, it was only 2/3 completed, and the copy rate had slowed to such a crawl that I had no idea when it would finish. I therefore reluctantly interrupted the process, since I had meetings to attend where I needed my computer.
    By that time, I had done some further research online and learned that people were recommending doing the initial backup via Ethernet, so when I got home that Monday night, I decided to do it that way instead of via wifi. However, it was unable to resume the interrupted backup, so I had to start over from scratch. Over the course of several attempts to do this, I discovered moreover that the interrupted backup had corrupted the disk somehow, so eventually I had no choice but to erase the Time Capsule entirely before beginning a new backup. Each of these attempts took a half hour or an hour, so I wasted my Monday evening doing nothing but try and retry to start the backup. (Somewhere in the middle of this I also did a tech support call to Apple, which also meant time on the phone, sitting on hold, etc.)
    Finally, sometime on Tuesday I got the backup started, and by late that evening I had my first incremental backup. Hooray! Or so I thought.
    The thing ran OK for a month or so, and then for no apparent reason I discovered that backups were failing. Why? No idea. I called Apple tech support again. An hour or so on hold, then talking to an operator, then trying various things. Eventually the tech support guy told me I'd have to erase the hard drive again and do a new initial backup. Great. At least I knew by then that I'd need to do it via Ethernet, but of course it took the better part of a day for the backup to run, and starting over meant losing all of the history in my previous backups. But I did it.
    After that, I had a good run for several months...maybe six months. Then, for no apparent reason, the backups started failing again. This time I managed to get the backups working again by unplugging the Time Capsule, plugging it back in, and doing some reset procedures.
    A month later, the Ethernet connection started failing.
    I have an old iMac upstairs that I plugged in to the Ethernet connection so it can access the internet and file-share with my laptop. One day I noticed that the iMac's internet connection was no longer working. After some testing, it turned out that neither the iMac nor my laptop is able to connect anymore through the Ethernet connection. I tried several cables, tried playing around with settings, to no avail. I had a trip to Hong Kong coming up, so I decided I'd worry about the Ethernet connection after I got home.
    On the Saturday before my Monday morning flight to Hong Kong, my laptop died.
    It was working fine on Friday evening. I went to bed, got up, and the screen was black. In a panic, I drove to the Apple store and, after much pleading, got them to look at the thing in a hurry. Their tests showed that the logic board was bad. Fortunately, they had a replacement in stock, so they were actually able to repair the laptop in only two hours.
    Since then, however, I haven't been able to get backups to work at all on my Time Capsule.
    When the laptop died, I figured I might need to restore files from the Time Capsule, so I unplugged it and took it with me on my frantic drive to the Apple Store. After I brought it home and plugged it back in, the laptop recognizes that it exists, but instead of doing an imcremental backup, Time Machine wants to start all over with a backup of more than 140 gigabytes.
    No ******* way.
    My plan at this point is to make an appointment at the Apple Store and take it in to someone at their Genius Bar. Maybe they can figure out why Ethernet isn't working and why the incremental backups aren't happening. In the meantime, I don't know if any of the backups that it has done to date are any good, so it's an uneasy feeling. And, of course, I've wasted more time than I care to think about just tweaking and nursing the thing.
    It just isn't worth it.
    If anyone has any suggestions for what I should be trying at this point, I'd love to hear advice.

    I've got some time here as I wait on my computer (more on that in a moment), so in the meantime I re-read Smokerz's reply to my message. Upon re-reading, I thought I'd respond again.
    Smokerz is saying basically that Time Capsule is great for purposes OTHER than backing up my computer's hard drive: "Make your primary TM backup using an external FW800 drive first. ... I don't do TM on TC but use TC as my internet file server for my family who all lives far from one another and stream movies to my ATV. Much better use of TC, eh?"
    There might be a case for that use of Time Capsule, but the product is advertised and sold primarily as a wireless backup device. The main page for the product on apple.com describes it as "Automatic wireless backup for your Mac. ... Time Capsule is a revolutionary backup device that works wirelessly with Time Machine in Mac OS X Leopard. It automatically backs up everything, so you no longer have to worry about losing your digital life."
    Smokerz is therefore arguing that I should be happy with a product that doesn't work for the purpose for which it is primarily advertised and for which I bought it. I don't have any use for it as an internet file server or to stream movies. To say I should be happy with it for those purposes makes no sense.
    Here's a little update on my experience with this thing. I made an appointment and visited the Genius Bar at the Apple Store yesterday. My appointment was at 10:40. I spoke with *** ****, who by the way is "Lead Genius" at the West Towne story in Madison, WI. I've got no problems with him. Like every other Apple employee I've dealt with locally, he was competent, courteous and and helpful. He quickly fixed my Ethernet problem, but the more important problem -- the failure to connect to my existing backups -- left him stumped as it did me. The problem apparently is that when Time Machine uses the MAC address of your computer's logic board as part of its way of identifying your system. There is a file on the backup drive that stores this information. It's filename consists of a period followed by the old MAC address. There is a procedure for renaming that file and changing some other settings which is supposed to make the backup work again. The procedure is detailed here:
    http://www.macosxhints.com/article.php?story=20080128003716101
    http://discussions.apple.com/thread.jspa?messageID=6893237
    The problem in my case is that the file was missing when I went looking for it. (I hadn't been mucking around on my Time Capsule, so I don't see any way that I could possibly have deleted it.)
    After some scratching his head, *** asked me to leave my computer and Time Capsule with him at the Apple Store and come back at 2:30 that afternoon. When I returned, not much progress had been made. He had found a way to make Time Machine do another initial backup from scratch within the same sparsebundle as my older backups and thought that once that backup completed, there would be a way to connect up with the the older backups. By 2:30, however, the backup had only completed 4 GB out of the 130 gigs on my hard drive. The Apple Store closes at 9 p.m., so I would have had to leave it with them overnight just to get through that stage of the process. I think I mentioned previously that I live an hour's drive from the Apple Store, and since I had already burned another entire day trying to get this thing working, I had *** give it back to me so I could take it home and try to complete the procedure myself.
    Once I got it home, I let the backup run overnight. It took about 12 hours to complete. Now I'm going through the procedure *** gave me, which is documented in a little more detail here on Sean Kelly's blog:
    http://seankelly.tv/blog/blogentry.2008-08-25.8041499927
    I just finished spending an hour waiting for the computer to open my sparsebundle (step three of Sean Kelly's procedure). Only six more steps to go!
    <Edited by Moderator>

Maybe you are looking for