Journal entry disappears after saving and not available to post
Hi Gurus
On BPC for Netweaver version 7.5 and excel 2003 i am able to save the journal entry but am not able to post it since it disappears after saving. I could see the Journal ID being generated and then the layout gets cleared . i am unable to post this journal. Also when i go to journal manager and tries to list the journals this saved journal does not show up.
I have already set the application parameter "JRN_MAXCOUNT" to 1000 so that i can see the journals that i create.
Have any of you faced such an issue?
Regards
Hi Tara,
Thank you very much for your tip. I had Datasource as one of the header fields and i moved it to the item fields to make it work. I am still not sure why does that. May be because when we create the journal template system proposes only the required fields in Header and if select additional ones its not liking it.
I cannot come up with a reasoning why we cannot incorporate a non required field in header journal template . The obvious reason that i included the datasource dimension in header itself was because it was a common value that i want to use for all my journals.
Anyway i hope SAP would either fix this or come up with a reasoning.
Thanks again..
Similar Messages
-
Word document disappeared after saving and letting go flat
I spent my whole day doing coursework and saved it for certain
Then I let my laptop go flat because I was going to charger it later and no longer needed it
Then once charged again I went to find the file and it was gone?
help??Yes. I have searched for the name that i named it. It is not in my computer anywhere. It is not in documents, it is not in recent documents in word. My word processor says i have not been on word in 2 days.
-
How do
If you've bought Audiobooks and ringtones, you need to transfer your purchases to your computer iTunes for safekeeping.
Audiobooks and ringtones are one time only download, you cannot re-download for free. -
CS5 indd files occasionally change after saving and reopening
Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?
There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
After Effects is not available in the apps list
After Effects is not available in the apps list on creative cloud that I just downloaded.
I tried to download it from the site, but It would automatically launche creative cloud which, again, doesn't include after effects !!
What should I do ?Apparently I'm using 32-bit operating system
and AE requires 64-bit support. -
Why does my IOS7 update after downloading say " not available at this time try again later" any ideas?
With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.
All anyone can really recommend is to keep trying or wait until a bit later, after the hubub has died down. -
Colour corrections not saving and not exporting
Am puzzled by something in FCE. I did a whole load of colour corrections, then saved and closed the project. Whenever I re-open the project, all the colour corrections are un-done. All other edits are unaffected. This happens repeatedly.
Also, after re-doing the colour corrections, saving and NOT closing, I exported the project to MPEG2. The colour corrections did not come through on the exported file.
My timeline is 3.5hrs long, and re-doing all these colour corrections is *time consuming*.
Please does anyone have any ideas what I'm doing wrong?
Any help appreciated.
iMac Mac OS X (10.4)No.
If you have created some modified effects (eg. 3 second dissolve) and put them into your FCE Favoutites Bin, trashing the preferences will trash these. They can easily be re-created or save this Bin somewhere else and bring it back if that's the course of least resistance.
Al -
Reminders no longer work. Alert time disappears after saving.
After setting the date, time and alert the time disappears after saving.
Go to iCloud.com and check if your reminder on there has been backup. If all your remainder was backup. You can go to Settings>iCloud>Turn on Reminder
Sometimes iCloud setting should be turned on for Calendar or Reminder for it to work like to create new event on the calendar or reminder -
Excise invoice is not saving and not showing datas
in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker -
Under the View tab, Sorting Options, the Manual Sort is dimmed and not available to me; how do I fix?
In an album just drag the photos where you want them. Manual sorting is not available in smart albums
LN -
My new filters tree flames and picture frame are greyed out and not available?
my new filters tree flames and picture frame are greyed out and not available. what do I need to do?
It's likely that your graphics card/GPU does not support the new feature. If you are using an older video card or an integrated graphics card that is not new like the Intel Iris or Iris pro than that is likely the reason.
-
Image disappears in the RH after saving and reopening the report
Hi,
I am using CR2008.
I have created several reports with images but didn't get this type of problem.
I inserted image in the Report header and everything is fine, after save and exit if I reopen the report there is no image. It disappeared. I tried all possible ways with bmp, jpg formats of image and re-size the image. Still same problem. There is a blank OLE Object in the Report header when I reopen it. Is there any solution for this issue?
Thanks!
Edited by: Krishna.R on Jun 10, 2011 10:02 PMHi
Thanks for the reply. My problem is solved. The image file is too big in size and I resized it in crystal, that's why it behaved wiered. I reduced the size of the image outdide the crystal report in mspaint and then copied to crystal. It worked. -
Imported Objects Disappear After Saving
I have been working on a project into which I've imported 4 Illustrator objects (If you look at the first image below, the objects are a lightpost, two figures, the word StoryFirst and the word Media). I saved the 4 objects as separate files in Illustrator and then imported each one as "Composition" while leaving the "Illustrator/PDF/EPS Sequence" box unchecked.
After saving the AE project last night, I reopened the project this morning and found this:
As you can see, the lightpost and figures objects are still visible in the composition pane, but the StoryFirst and Media objects have disappeared. The files are still listed in the project pane, however, and you can still select the object layers in the timeline and you will get the object wireframes in the composition pane as if they were still there, but the actual objects themselves are no longer visible. As you can see in the picture, when I select a layer of the StoryFirst object in the project pane, the mini-preview in the upper left corner doesn't even display it.
I've tried closing and reopening the project a few times as well as toggling on and off the eye switch on each layer in the timeline, both to no avail. I also tried right clicking on each layer and choosing "Replace File" and bringing everything back in again new. This makes the objects reappear at the moment I have the project open, but as soon as I save the project again, close it and reopen it, they've disappeared again! All object files are in the same place in my hard drive as they've always been. AE never prompted me with an error message that it couldn't locate files. This is a very bizarre problem I've never encountered before.
Any help in solving this mystery would be greatly appreciated! Thanks everyone!
Michael
Founder/Director, StoryFirst Media
www.storyfirstmedia.comIn AI, check your layers palette and inspect the structure of your groups. There may be odd combinations of e.g. groups with empty clipping masks (that cover the entire artboard and are only there, because the graphics were imported from a legacy version of AI or another program). That could lead to misinterpretation where then AE would clip the entire artwork. Similarly, look for things like Livepaint groups or live pathfinder groups. Same for art brushes, pattern brushes, pattern fills etc. In case of doubt, always do an Object --> Expand, then select the artwork and choose "Release Clipping mask". Often a bit optimization will do wonders. Also, one thing that came to mind after I wrote my last reply, is to check your swatches. Since AE operates in RGB mode only, it may not deal correctly with spot color swatches (Pantone) and CMYK swatches...
Mylenium -
Address book entries disappear after MobileMe synchronization
Morning.
I've installed a clean MacOS X 10.6.8 installation from the scratch. I've found in the Address Book my own visit card and Apple's visit card. Then I've set to sync with my MobileMe account. After that I've set that MobileMe synchronization should replace all items on my local Address Book with the item stored in my MobileMe address book.
The result is: The items previously shown in Address Book disappear. The Address Book is completely empty. But in ~/Library/Application Support/Addressbook all the contacts are stored in the database and all the images as well. This is what ls -al has found:
drwx------ 4 rafv staff 306 2 Feb 21:05 .
drwx------+ 24 rafv staff 850 2 Feb 10:17 ..
-rw-------@ 1 rafv staff 12292 2 Feb 21:08 .DS_Store
-rw------- 1 rafv staff 10 2 Feb 21:05 .database.lockN
-rw-r--r-- 1 rafv staff 2439168 2 Feb 10:23 AddressBook-v22.abcddb
-rw-r--r-- 1 rafv staff 328 8 Jan 15:15 Configuration.plist
drwx------ 2 rafv staff 918 2 Feb 10:13 Images
-rw-r--r-- 1 rafv staff 24576 2 Feb 10:23 MailRecents-v4.abcdmr
drwx------ 2 rafv staff 56032 2 Feb 21:05 Metadata
Any idea how to fix this problem?
Thanks in advance and kind regards, FriedrichOver the last few months I've had entries disappear - just one or two here and there. For a long time, I thought I was imagining things. But today I went to make some calls to my family and I did a search for the family last name. Only two cards came up... about 16 cards were missing. There's no way I deleted these. Fortunately, Time Machine saved me, but I didn't find the cards until about a week back, so they've been gone for a while (guess I don't call the family often enough).
My only guess is that there's some sequence I'm performing that ends up deleting a card (you know, something like editing a card, then switching to mail, then switching back to ABook and doing a search or something like that). But since I don't know when I've done it, I can't seem to track it down. I'm worried about vanishing data ... And unless I actually notice that it's vanished, I can't recover it, even with Time Machine.
I haven't had all my cards disappear - this is just an isolated few. Anyone else have this problem? Any thoughts? -
Bug Report: "View PDF After Saving" Does Not Work When Saving as Photoshop PDF
The saved PDF file is not opening in Acrobat after saving a file as a Photoshop PDF. I noticed it happening a few times in earlier beta testing, but today it happened again.
I have Adobe Acrobat Pro 10.1.2 installed on MacPro with Lion OS 10.7.3. Photoshop public beta m415. System info can be provided if needed.
The file I was trying to save was about 8 MB. Once it failed to open after save, I tried varied PDF settings and save locations. Also tried several different files. All were saved properly as PDF files, but would not continue to open in Acrobat as previous versions have done. The files open properly when you click on the file names in saved location.
3153152
3153152I'm happy I could help and feel a bit proud to have found a real bug. The simplest work around is just clicking on the file list once it's done...that's certainly not a problem.
Larry
=====================================
Larry Guyer
A la Carte Digital Studios
Archetype Digital Imaging Alliance
P.O. Box 4365
Foster City, CA 94404-0365
650-348-2525 office
323-372-1669 fax
650-444-7100 cell
www.alacartedigital.com
www.archetypeimaging.com
Maybe you are looking for
-
Hi All, We used report generation tool kit to generate the report on word and with other API 's under it,we get good reports . But when the data points are more (> 100 on all channels) it take a long time to write all data and create a table in the
-
hello, i found list of function under BAPIACC in se37. can we use this func. in zprg to get balance related with gl , vendor & customers. performance wise bapi is better or our own code. thanks & regards raj
-
Indesign Files Uploaded to the Cloud dont open in the web UI
Hi, When I upload an indesign file to the cloud, the thumbnail shown is a default one & if I open the file (using the web UI) I cant view the content of the file. I tryed to view the uploaded files using Chrome, Firefox, Safari & IE both in OSX, Wind
-
Bought 3 Month Subscription Before Knowing I Also ...
Hi, I bought a 3 month subscription to make US Calls using Skype before I knew you needed to also buy a number to receive calls. So, I decided to buy a number too but that also comes with a 3 month (forced) subscription...I paid for both now...does
-
Different Key field Names - Possible?
Hi All, I have 2 main nodes, Header and Detail. Is it possible for me to have a different nodes (like Hkey in header & Dkey in Detail) as keyfields? Thanks & Regards, Jai Shankar.