Journal in Exchange 2010

Hello Everyone,
Need to know how we can Effectively use journaling Mailbox in Exchange 2010 (SP2). As per our company policy we are having one weeks of data backup for all mailbox. one of the user want to reterive some mails which are sent six month ago.
Our requirement : how to search single or multiple mails using journaling mailbox. or how to recover the information or mails using journaling mailbox.

I hope you have Single Item Recovery enabled.
To search the email (eDiscovery) you use ECP as well as PowerShell.
http://www.exchangeinbox.com/article.aspx?i=148
Please have look at 3rd article in my previous post to get the email from Journaling Mailbox. It doesn't matter if it's user Mailbox or Journaling Mailbox, eDiscovery will search email in the mailbox.
My Suggestion for you would be to use Third Party Archiving Solution rather exchange In Build Archiving. There are several good reason to use 3rd Party Application.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • Journaling mailbox - Exchange 2013 Migrations from 2010

    hi guys
    i am about to start mailbox movement from Exchange 2010 to 2013. my setup is working fine. i have enabled journaling from Exchange 2010 and as ii found, automatically journaling rules will be reflected to exchange 2013. i had very big journaling mailbox
    and then newly created New Exchange 2010 journaling mailbox. now new journaling mailbox is configured for journaling and that also still on 2010(both Old and new journaling mailbox ), new mailx is couple of weeks old (6-8 GB) and old one is 2.6 TB. So i will
    move old one at the end .
    my questions is if i move new journaling mailbox to 2013 before start normal Mailboxes, it will cause some issues for journaling. i use premium journaling . is it okay to move journaling mailbox at the begin ?? 
    thank you
    Indunil

    Hi,
    Based on my test, journal rules will be synchronized in Exchange 2013 after you create in Exchange 2010. If you create in Exchange 2013, then the rule will be synchronized in Exchange 2010.
    And I did create a rule to send message to a Exchange 2013 jounal mailbox for Exchange 2010 users. It worked.
    So you can migrate journal mailbox to Exchange 2013 firstly based on this test.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Exchange 2010 to 2013 migration: Mailbox move requests are journaled.

    Hello,
    I've installed Exchange 2013 into Exchange 2010 infrastructure
    [ single Exchange 2010 server; single AD site; AD = 2003 ],
    Exchange 2010 has 2 databases:
    1. Database with users mailboxes;    Journaling YES: Journal account.
    2. Database with 1 mailbox for Journal user mentioned above:     Journaling NO.
    Exchange 2013 has 1 database:
    1. Database with moved users mailboxes;    Journaling YES: Journal account.
    I saw that when I move mailbox from 2010 to 2013 then Journal Database INCREASES about size of MOVED MAILBOX !
    I logged into Journal mailbox by OWA and didn't see any duplicate messages concerned with this mailbox user...
    I'd like:
    * to understand technically what happened,
    * to avoid unnecessary growth of Journal Database.
    I'd like not to switch off journaling for all users during mailbox move.
    best regards Janusz Such

    Hello Winnie,
    your understanding is not correct:
    I move mailboxes from first DATABASE which is journaled;
    second database is dedicated solely for Journal user's mailbox and is not touched now.
    Thank you for PS commands; I'll use them...
    best regards Janusz Such
    Hi Janusz,
    Sorry for my delay. In your original posting, "I saw that when I move mailbox from 2010 to 2013 then Journal Database INCREASES about size of MOVED MAILBOX !"
    My understanding is that when you move mailbox from Exchange 2010 Database 1 to Exchange 2013 database, the journal mailbox in Exchange 2010 Database 2 is incleased. Is it right?
    Generally, the mailbox move would not be journaled unless there is any new email bening sent to the mailbox during the migration. Please run the commands in my original posting to check the statistics about it, and refer to Ed Crowdly's suggestion to use
    Journal rule instead of database journal as a workaround.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange 2010 SP3 maximum journal mailbox size for performance

    Hello all,
    Does anyone know if there is a limit mailbox
    size near 01 terabyte than
    above it generates performance problems?
    We have a journaling mailbox that
    reached today 1.077 GB  and
    from there began the process very
    slowly messages to store.
    All (4) Exchange Hub Trasnport that try to connect to this store get an 4.32 store drive error.  A new
    journal mailbox was created in the same
    database, and the problem was solved.
    Thanks
    João Paulo.
     Exchange 2010 SP3 RU8 on-premisses

    Hi Paulo,
    Base on my knowledge,  journaling mailbox as the same as any other mailbox, the maximum size depends on the data to be stored in the mailbox, the hardware resources available, and the disaster recovery requirements
    for the server where the journaling mailbox is located.
    If you configure journaling mailboxes without storage quotas, monitor the Mailbox server to ensure that it doesn't exceed the available hardware resources or disaster recovery capabilities.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Niko Cheng
    TechNet Community Support

  • Different Exchange 2010 journaling

    We transition from Exchange 2003 to Exchange 2010 SP1.  Now I enabled the journaling on each DB and I checked the journal mailbox and the journaling message is as
    Microsoft Outlook on behalf of Smith, Ana Sent:  Wed 3/30/2011 2:15 PM
    To:   John, Smith
    Cc:   
    Subject:   test6
    Attachments:   test6‎(2KB)‎ 
    Sender: [email protected]
    Subject: test6
    Message-Id: <[email protected]>
    To: [email protected]
    The captured message is in the attachment.  How can we use the above the journaling message for compliance?
    Can we get the journaling to capture the real message like Exchange 2003 sender: From Smith, Ana; to Smith, John
    Subject: test6
    and messgae in the body, not in the attachment?  What might I miss?
    Thank you!

    It was changed to comply with the various laws and at the request of those who need to work with them. It means the message is a true copy of what went through the server. A copy of the message just delivered to the mailbox is not a true copy, it will
    be modified because it may have additional header information applied as it is delivered to the journal mailbox.
    Most people will use a third party tool to manage the journal mailbox, rather than opening the messages directly.
    When you move it I don't think really matters.
    Simon.
    Simon Butler, Exchange MVP
    Blog |
    Exchange Resources | In the UK?
    Hire Me.
    Could you give an example of a third party tool that does extract these .msg files and sends them to a different mailbox?

  • Need help in Importing User, Shared and Journals into Exchange

    Hi,
    I have been tasked with the following imports into EX07 and EX10 following an acquisition:
    Shared MB 12 GB, corrupt pre-nov 2013 archives of users 30GB, shared sent items 4GB, users sent items 80GB. All in .pst format.
    4-8TB of journal data to be imported into Enterprise Vault 2010 with EX2010 (in .pst format)
    I'm looking for the best approach to get these imports done. Also, need to compile an assessment done on the time and performance ramifications of running these imports into EX as other migrations are currently on. Do I need to parallel run perfmon with
    EX counters to monitor while import is running in the background?
    Is it a good idea to run import of journal into Enterprise Vault of 4-8 TB data in .pst format in one go?
    Thank you for your comments...
    TY
    - thestriver

    Hi,
    In addition to Rajith's suggestion, I would like to verify the following things:
    In Exchange 2007, you can use the Import-Mailbox cmdlet to import all messages types, including messages, calendar items, contacts, distribution lists, journal entries and so on. Here is an example of importing the mailbox data from the amy.pst file that
    is in the Sent Items folder:
    Import-Mailbox -Identity amy -PSTFolderPath C:\PSTFiles\amy.pst -IncludeFolders '\Sent Items'
    In Exchange 2010, you need to use the New-MailboxImportRequest cmdlet.
    For more information, here is a thread for your reference.
    New-MailboxImportRequest
    http://technet.microsoft.com/en-us/library/ff607310(v=exchg.141).aspx
    Hope it helps.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Complainance Archiving in Exchange 2010

    Hi Everyone,
    Thanks for your support.
    We are looking for a e-mail archiving solution to archive for complaince with Exchange 2010 where all the e-mails sent and received should be archived. We want to keep these e-mails for 10 years. Also, the folder structure of the mailbox should be replicated
    to the archiving solution. Our mailbox growth is about 1 GB/month approx and also the performace of the archiving solution should be good when users try to access their old emails from the archive.

    Hi Nothing -
    You bring up two items, Archiving and Compliance.  Exchange has built-in solution for Archiving emails with the Archive mailbox but they compliance solution with retention of 10 years...Exchange just isn't there yet.  Aside from mailbox size and
    retentions, you now have logs that you need to keep, dumpsters to grow, etc.  It would make more sense to look into a third party solution for 10 year retention at this time.  Exchange 2013 will give you a little better option with Time Based/Query
    Based holds but its still not where it needs to be.
    I would think about using Journaling for compliance to a 3rd party solution so that you are able to search and retain and apply rules.  There are a lot of good ones out there to look at.  Some have built-in features to stub emails so you could
    theoretically use it for Archiving as well.
    Jason Apt, Microsoft Certified Master | Exchange 2010
    My Blog

  • Exchange 2010 SP3 startdagservermaintenance.ps1 issues

    My Environment is as follows:
    Production
    Server 1 -  CAS, Hub Transport (DAG witness server)
    Server 2 -  Mailbox (3 databases - DAG with Server 3) - Currently at SP1
    DR Site
    Server 3 -  Mailbox, Hub Transport
    I have Exchange 2010 SP3 applied to server 1 and 3.  I have not been able to successfully run
    StartDagServerMaintenance.ps1 on Server 2.  If I am ok with downtime, is there any risk in upgrading my server without running this script?  If so, would I need to power off Server 1 and 3 first?  I believe my issue with the script may
    be due to a journal mailbox.

    I assume you are talking about Updating Mailbox Server or you are just testing the script?
    No you don't have to shutdown the server.
    About the script, its suggestion to run it, but even if you are not running its ok.
    By the way, how you are running the script? Are you running from the location where the script is residing.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2013 CAS server connection to Exchange 2010 Mailbox server

    Hi Guys,
    I have a quick question i am planning to upgrade my infra from Exchange 2010 to Exchange 2013 and i have come across a small question, my infra looks likes below
    3 Exchange server (CAS+ HT + MBX roles) Exchange 2010
    1 Exchange server MBX role For journlaing Exchange 2010
    1 CAS for internet owa access Exchange 2010
    Now i will be  installing exchange 2013 CAS on 2 box and MBX on 3 box 
    will decomm the 3 exchange box which has (CAS+ HT + MBX roles) and 1 CAS which we use for owa access.
    will keep the Journaling server as it is will not be decomming it as of now.
    My question is is will i be able to connect to the journaling mailbox's which are hosted on exchange 2010 journaling server without actually having any 2010 cas server, will exchange 2013 cas directly help me to connect to the journal mailbox or would i need
    to add CAS role on Exchange 2010 journaling server and enable outlook anywhere configure the directories with the url's to make it working.
    Please suggest on the same.
    BR/Deepak

    Hi TheLearner,
    Thank you for your question.
    Exchange 2013 didn’t connect to the journal mailbox directly when we access it by outlook/OWA. The journal mailbox will connect the former Exchange 2010 CAS. Or we could migrate Journaling mailbox to Exchange 2013. Because Exchange 2010  could communicate
    with Exchange 2010 by RPC, but Exchange 2013 could communicate with Exchange 2013 by HTTPS.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Exchange 2010 and 2013

    Hi All can some one guide me in correct path on exchange journalDB restore? I have Journal DB on exchange 2010 i need to mount the journalDB to exchange 2013 once this is successful i can decom the exchange 2010 servers. until i dont get journal DB restore
    right i will not be able to decom my exchange 2010.i have tried restoring using DPM backup server but not having any luck. i have followed following link to restore the DB.
    http://exchangeserverpro.com/restore-individual-mailbox-exchange-2010/
    Regards
    Ravi

    According to your description, I would like to refer you on this well explained blog that covers all the required parts and would be a good start-up while need to restore Journal mailboxes using DPM :
    http://www.techrepublic.com/blog/data-center/eight-steps-to-restore-an-individual-exchange-2010-mailbox-with-system-center-data-protection-manager/
    Moreover, you may also consider on this automated option (http://www.exchangeserverrecovery.com/) that could also be a better alternative approach for the same concern.

  • Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

    Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
    Tried several mailboxes. Same result.
    Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
    Ex 2013 is SP1 aka CU4.
    How to proceed???
    john11

    After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
    btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
    What did work:
    1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
    of the four mailboxes. The other 3 failed.
    2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
    3. Then on the Exchange 2013 box, use this Exchange shell command:
    New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
    This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
    Get-MoveRequest
    The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
    Thanks for the suggestions. I had to get this done and the MS Tech made that happen. 
    john11

  • Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

    Hi All,
    We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
    There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
    The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
    The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
    A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
    It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
    We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
    iPhone 3Gs    IOS 3.1.3
    iPhone 3Gs    IOS 4.3.3
    iPhone 4       IOS 4.3.3
    iPhone 4       IOS 4.3.5
    I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
    Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
    The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
    it must be something misconfigured in this Exchange server right?
    We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
    Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
    Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
    It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
    Does anyone have some insight into what the problem may be?

    Further to this .. I found the solution on a MS Exchange 2010 support forum.
    It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
    Org Config – Hub Transport cannot have any spaces in the name field.
    I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
    restarting the Exchange and IIS services emails were now being sent and received ok.
     Check
    out :
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
     This
    is good one to add to your knowledge bank in case you come across it in the future.
    Rgds Gerry

  • Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

    We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
    I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
        get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
    One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
        http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
        "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
    tests using troubleshooting scripts find no issues with search indexer,
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
        Get-EventLog : No matches found
        At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
        + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
        -eq $msftesqlCrashEventId}
            + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
            + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
        Name IsDeadLocked CatalogStatusArray
        SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
    and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
        [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
        Server Database ServerGuid ResultFound SearchTimeInSeconds Error
        SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
    I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
    We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
    Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
    same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

    Hi IAMChrisL,
    Any updates?
    Frank Wang
    TechNet Community Support

  • Exchange 2010 can't send or receive email with attachments.

    Hello,
    We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
    The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
    the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
    As the server is set attachments should be able to send and receive up to 20 MB.
    I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
    I also checked using the Exchange Power Shell using the following article:
    http://eightwone.com/2010/09/29/exchange-message-size-limits/
    Both show that all settings are suitable. Details are below
    I would appreciate feedback on this problem.
    Thank you!
    Details from the articles noted above:
    First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
    Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
    Reviewed and verified settings per the following 2 articles:
    Article #1
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
    Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
    Settings set to max send size (KB) = 20480
    Organization Configuration> Hub Transport> Send Connectors tab.
    Maximum message size (KB) set to 20480
    Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
    A list of all Receive Connectors will be shown below
    There are 3 receive Connectors
    #1) named Client XXXXXXXXXX
    Maximum message size (KB) set to 20480
    #2) named Default  XXXXXXXXXX
    Maximum message size (KB) set to 20480
    #3) named relay
    Maximum message size (KB) set to 20480
    Use Exchange Management Shell to check settings
    #1) Get-ADSite
    Returns:
    Name                           HubSiteEnabled
    Default-First-Site-Name        False
    #2) Get-ADSiteLink
    Name                      ADCost     ExchangeCost    Sites
    DEFAULTIPSITELINK         100                        {xxxx.local/Configuration/Si...
    #3) Get-ADSiteLink | select Max*
    MaxMessageSize
    unlimited
    Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
    No rules
    Article #2 
    http://eightwone.com/2010/09/29/exchange-message-size-limits/
    COMMAND: Get –TransportConfig
    results:
    ClearCategories                     : True
    ConvertDisclaimerWrapperToEml       : False
    DSNConversionMode                   : UseExchangeDSNs
    ExternalDelayDsnEnabled             : True
    ExternalDsnDefaultLanguage          :
    ExternalDsnLanguageDetectionEnabled : True
    ExternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
    ExternalDsnReportingAuthority       :
    ExternalDsnSendHtml                 : True
    ExternalPostmasterAddress           :
    GenerateCopyOfDSNFor                : {}
    HygieneSuite                        : Standard
    InternalDelayDsnEnabled             : True
    InternalDsnDefaultLanguage          :
    InternalDsnLanguageDetectionEnabled : True
    InternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
    InternalDsnReportingAuthority       :
    InternalDsnSendHtml                 : True
    InternalSMTPServers                 : {}
    JournalingReportNdrTo               : <>
    LegacyJournalingMigrationEnabled    : False
    MaxDumpsterSizePerDatabase          : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                     : 7.00:00:00
    MaxReceiveSize                      : 20 MB (20,971,520 bytes)
    MaxRecipientEnvelopeLimit           : 500
    MaxSendSize                         : 20 MB (20,971,520 bytes)
    MigrationEnabled                    : False
    OpenDomainRoutingEnabled            : False
    Rfc2231EncodingEnabled              : False
    ShadowHeartbeatRetryCount           : 12
    ShadowHeartbeatTimeoutInterval      : 00:15:00
    ShadowMessageAutoDiscardInterval    : 2.00:00:00
    ShadowRedundancyEnabled             : True
    SupervisionTags                     : {Reject, Allow}
    TLSReceiveDomainSecureList          : {}
    TLSSendDomainSecureList             : {}
    VerifySecureSubmitEnabled           : False
    VoicemailJournalingEnabled          : True
    HeaderPromotionModeSetting          : NoCreate
    Xexch50Enabled                      : True
    COMMAND: 
    Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
    C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
    WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
    COMMAND: 
    Get-SendConnector
    Identity                                AddressSpaces                         
     Enabled
    Internet                                {SMTP:*;1}                             
    True
    COMMAND: 
    Set-SendConnector -Identity Internet -MaxMessageSize 20MB
    WARNING: The command completed successfully but no settings of 'Internet' have been modified.
    COMMAND: 
    Get-ReceiveConnector
    Identity                                Bindings                                Enabled
    XXXXXXXXXX\Default XXXXXXXXXX           {0.0.0.0:25}                           
    True
    XXXXXXXXXX \Client XXXXXXXXXX     {:::587, 0.0.0.0:587}                   True
    XXXXXXXXXX \relay                        {0.0.0.0:25}                           
    True
    COMMAND: 
    Get-ReceiveConnector | fl Identity,MaxMessageSize
    Identity       : XXXXXXXXXX \Default XXXXXXXXXX
    MaxMessageSize : 20 MB (20,971,520 bytes)
    Identity       : XXXXXXXXXX \Client XXXXXXXXXX
    MaxMessageSize : 20 MB (20,971,520 bytes)
    Identity       : XXXXXXXXXX \relay
    MaxMessageSize : 20 MB (20,971,520 bytes)
    COMMAND: 
    Get-AdSiteLink | fl Name,*max*
    Name           : DEFAULTIPSITELINK
    MaxMessageSize : unlimited
    COMMAND: 
    Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
    No routing group connectors are installed
    Individual
    Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
    Set to 20480 for send and receive for all.
    Re-tested and had the same problem. 
    Post on Technet.

    ExchangeITPro,
    Thank you for your reply.
    >what SP are you at?
    As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
    the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
    >try restarting the transport services.
    Done previously as well as the entire server. No change.

  • Exchange 2010 GAL Export script working from EMS but not as a scheduled task

    I have been asked to get a script together to export the GAL on an Exchange 2010 server and then email it to a manager. I have been playing it with days, and have pruned it to the very minimum to at least try and get it working before improving it. At the
    moment I have the text as below:
    Del c:\GALexport.csv
    Get-Recipient -ResultSize unlimited | where {$_.HiddenFromAddressListsEnabled -eq $false} | Select DisplayName,PrimarySMTPAddress,sAMAccountName,alias | Export-Csv "c:\GALexport.csv"
    This works just fine in Exchange Management Shell and deletes the previous report before creating a new one. However, when I set it up as a scheulded task, it does nothing.
    The task is set up as follows:
    Action - Start a Program
    Program/ Script C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe
    Add arguments -version 2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
    This is set to run under my administrator account with the highest privileges and I have the logon as batch right.
    Unfortunately, when I run it as a scheduled task, nothing happens. The last run result is (0x0) and in the history it says 'task completed', but no report is produced. Can anyone advise please?

    Does it delete the c:\GALexport.csv file? If not, then its not even executing the ps1 script...
    - Open cmd prompt and run below command to confirm that there isn't any typo or any other small error...
    C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -version
    2.0 -NonInteractive -WindowStyle Hidden -command ". 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; d:\Scripts\GalExportReport.ps1"
    - If above works then something wrong with task scheduler configuration...
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

Maybe you are looking for

  • Asset module configuration

    i want to start the configuration of asset module in sap . is there any guide on configuration which i can refer or where i can get more information on the asset module implementation please. regards sathya

  • Qt high pitched squeeling sound

    Hi I have a MOTU 828mkII on a G4 Powerbook with OSX 10.4.8 and i'm getting this very high pitched beep/squeel and clipping sound whenever i try to play any audio in Logic Pro 7.1 or Reason 3.0 and also when watching videos in iTunes. However, playing

  • How can I sharpen photos in Photoshop?

    Okay I'm not an expert photographer and I don't do imaging professionally. I'm a web developer who gets the unfortunate task of building slideshows I don't need them super sharp just clearer, is it even possible? If so how?

  • Can clicking on an Accordion Tab also open a separate Spry Data region?

    I am generating a spry Acordion to list programs for an organization. When someone clicks on a tab and the content shows below I would like a set of photos and comments to open in a different adjacent div. I am wondering if the tab could act as the s

  • How to clone my SAP (production) to my SAP (dev) ?

    I need to clone my SAP (production) to my SAP (dev). What are the proper procedures of it ? Thanks a lot.