Journal Line Description not displayed

Hi,
I ran create accounting for Inventory ( cost management ) and inported the journals to GL. But we cannot see the journal line description.Instead only the Journal Import Created can be seen.
I found a note saying to change the following
Accounting Setup manager > Subledger Accounting Options > Cost Management > Update Accounting Options >General Ledger Journal Entry Summarization to No Summarization .
This works well for AP, but not for Inventory.
Please can someone explain this situations.
Thanks and Regards,
MPH

Setting Journal Entry Summarization to No Summarization alone can't give the description in GL.
Along with above, in the Journal Line Definition screen, you may need to add Journal Line Descriptions at Journal Line Type level.
More details on SLA Implementation Guide.
Accounting Methods Builder -> Journal Lines Definitions -> To Define Journal Lines Definitions
By
Vamsi

Similar Messages

  • Re: Journal Line Description not displayed

    Hi,
    Trying to do the same etc include journal line description. Found some notes and tried doing the below setups ....
    Did the followings ...
    1 Accounting Setup manager > Subledger Accounting Options > Cost Management > Update Accounting Options >General Ledger Journal Entry Summarization to No Summarization .
    2. In SLA Cost Management...
       -Define new JED, selecting PO number.
       -Define new JLD by copying the existing RCPT_REC_INSP and DELIVER_EXPENSE and attached the new JED.
       -Define new AAD by copying from the existing COST_MANAGEMENT and attached the newly created JLD.
       Lastly,  enddate the seeded SLAM and add a new AAD assignments and attached to the newly created AAD.
    But upon validating the accounting definition, it shows invalid and though enabled the fnd log, still do not see any message.
    Appreciate any help.
    Thanks
    WW

    Setting Journal Entry Summarization to No Summarization alone can't give the description in GL.
    Along with above, in the Journal Line Definition screen, you may need to add Journal Line Descriptions at Journal Line Type level.
    More details on SLA Implementation Guide.
    Accounting Methods Builder -> Journal Lines Definitions -> To Define Journal Lines Definitions
    By
    Vamsi

  • Oracle EBS GL Journal Line Description not being extracted by ETC

    It seems that the ETL for Oracle EBS (R12) includes the JE Batch Name, the JE Header Name/Description, and the JE Line Number. However, it does not include the JE Line Description. We have been able to meet all of our requirements based on out-of-the-box ETL and are trying to avoid customization. Has anyone run into this issue and has any customized the ETL to accomodate the need.

    yes most of the times there are alot of customizations ...
    If you are doing any customization to out of the box ETL job then you will do that in custom folders such as custom_sde or custom_sil. Now your modified etl job is in a new Informatica folder in order for this new etl job to run by DAC you need to create a new folder in DAC with the same name as in informatica and associate it with corresponding informatica folder.
    Please refer to the DAC Guide Section 5 for more step by step information !!
    Hope this helps !!

  • Modify Journal line description by SLA

    Hi,
    I modified the journal line description in AP by SLA, change the journal line description from invoice distribution description to invoice number+supplier name+invoice distribution description(default setup is invoice distribution description will be brought to journal line description), but I found if i write the description in invoice header, the system will add the invoice header description in the journal line description automatic, and I did not find any place where i can change it, the same thing is happened when i modify the ar receipts description, so could you have some experience about this, please kindly share it, thanks.
    Best Regards
    Spark

    Hi Vamsi,
    Yes, the header description will be added to lines and distribution lines description although I have modified the journal entry lines description in SLA, but when I checked accounting information in SLA in AP events, the description is correct, but after I transfer the journal to GL, the journal lines description will added the invoice header description in journal line description, so I think is there have setup where I can modify this? Thanks.
    Best Regards
    Spark

  • GL Account description not display..

    Hello Friends,
        In Account Assignment Frame .. GL account Description and Assigned to description not display.. any one facing this problem?
       Thanks,
       John.

    Hi John,
    Can u elaborate on your problem.
    There is a BADI which is used to change the document.
    BBP_DOC_CHANGE_BADI,This BADI can be used .
    To get the GL account details.
    You can use FM 's can be looked at.
    META_GLACCOUNT_GETDETAIL       Get Details from G/L Account
    META_GLACCOUNT_GETLIST         List of G/L Accounts
    Incase this does not solve your issue,please write your problem in details.
    Your statement does not make your problem clear whether it is appreaing in SC or PO and what scenario you are implementation and what is your support pack level.
    regards,nishant
    please reward if this helps

  • Autual cost line items not displaying in cji3

    in sap ps when i tried to see the autual cost line items, but it is  not displaying in cji3 ?
    Can anyone provide me the solution.waiting for response?

    Thanks 4 the rply, problem solved.
    The problem was due to overall budget planning. when i planned year wise it was solved.

  • Line items not displaying

    Hi,
    When i simulate in F-28(customer), only one line items is displaying
    eg: 40 SBI a/c 1500
    but not displaying the remaining items like
    eg: 40 discount a/c 500
          50 ABC cutomer a/c 2000
    what may be reason. where can i change settings
    Rgds
    sunfico

    Hi
    Check the partner function of the customer.   Also check whether the customer is linkekd to any vendor accounts and that vendor has a open items.
    Thanks
    Ashok
    Assign points for useful answer

  • G/L Account Description not displaying in the report

    Hi Friends,
    G/L account description was not found in the report, after loading g/l text and attribuites. Please help me what might be the problem in this regard.
    Regards,
    Raju..

    Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
    Raju

  • Query description not displaying in Workbook after upgrade

    Hi,
    I have saved my existing 3.5 workbook in 7.0 format. The query is also saved in 7.0 format. But after the upgrade the workbook on refresh is not populating the Description and Filter details of the query.
    Appreciate your valuable inputs.
    Thanks in advance.
    Prakash C

    Hii
    The workbook is work as an Excel sheet & also in the same format & restrictions that u have made while executing the query.And it shows the description as the name u give to the workbook
    but shows the same Query name inside the workbook.
    If description is not displayed then just disconnect the analyzer and connect it again.U will get the description also.
    Thanks
    Neha

  • Query Description not displaying in Bex Template

    Hi all,
    I have created a Template in Bex Analyser in the Design mode of a Workbook.  I have assigned this workbook template as the Default Template for all the Queries by selecting it in Global Settings.  I closed this workbook template and opened a query.  I am getting the template embedded in the query as i designed but the problem is the Query Description is not displaying correctly.  In the Query, it is showing the Workbook Description in the header instead of Query Description.
    Where should i change it?  Help me in fixing this.  Thanks.
    Regards,
    Murali

    Hi,
    you should use an Info Field WebItem to display the query name or description in your Webtemplate.
    Parameter in InfoField: General Text Elements for a Data Provider (GENERIC_TEXT_ELEMENT).
    You use this parameter to choose the generic text element that is to be displayed:
    ●      Query Name (QUERY)
    ●      Query Description (QUERY_DESCRIPTION)
    http://help.sap.com/saphelp_nw04s/helpdata/en/47/96784226d1d242e10000000a1550b0/frameset.htm
    Regards
    Andreas

  • Line item not displaying thru fbl3n

    Hello Dear,
    I am not able to see my posting document thru f-02 thru t.code fbl3n. I have checked the master data of the gls there is already tick in line item display. For it i run a programe that is RFSEPA01,  after running this programe i am able to see my posted document but not current post document.
    Pls help it is very urgent.
    Thanks in advance

    Hi,
    Although the question is not clear.
    But before running the program, you must block the questioned GL account for posting and run the program and again unblock the same and execute FBL3N report.
    Still , if you are not getting lines in FBL3N report, please check whether your new doc has line items in table BSEG or not thru SE16.
    Regards,
    Srinu

  • Hierarchy variable description not displaying correctly

    Hi all,
    I'm using 0ORGUNIT hierarchy variable in several queries either based on the characteristic 0ORGUNIT, or based on the navigational attribute 0EMPLOYEE_0ORGUNIT.
    When I execute the query with 0EMPLOYEE_0ORGUNIT hierarchy variable the selection node description displays the Medium description, which is correct.
    Whe I execute the query with 0ORGUNIT hierarchy variable the selection node displays the Short description, which is incorrect, as I need it to display the Medium description.
    The settings for the object in both query properties are set to display Text Medium Length, and 0ORGUNIT infoobject Business Explorer tab dipslays text,  text type is medium Length and bex description is long text, but still when I try to select the node in the parameter selection before query execution the description differs in both cases, any idea why??
    Please advice, much appreciated.
    Thanks!
    M.

    Hi,
    I understand what you're saying, and unfortunately I can't attach any screenshots here but both queries use the Medium Description in the object properties and it's maintained in the text table /BI0/TORGUNIT as well (short and medium).
    However, the BEx Descpription is only in short and long text, there is nothing I can change or maintain about that.
    It looks like everything is as it should be, because for one query I can see the medium text properly, but not for the other, even though I'm using the exact same settings, apart from the fact that in one query I use 0ORGUNIT and in the other it's used as a navigational object 0EMPLOYEE_0ORGUNIT.
    It's a funny thing indeed....
    Thanks
    M.

  • Description not displayed when loged in with different language

    Hi
    We have created some queries Loging in english language . When we use a different language for logon  say Portugese 'PT' the discription of the query is not dispalyed instead the technical name is displayed. This issue is same for all objects ( Infoproviders , Infoobjects etc .) .Is there any setting that should be maintained so that the object's description created in one language can be seen by login in with a different language .
    Thanks in advance,
    Biyaz

    yes I also working fro dutch clients
    and they have develped everything in Dutch language
    so whn I log on in En language I don't see desccription in English.
    there is no setting by which u can see description of custom object. but for standard object we are able ti see description in English language
    assign points if useful

  • Smart form footer issue in 2nd page - Horizontal line is not displayed

    Dear Experts,
    I am working on a smartform. Which has a table (Header, Main area, Footer), When there are more records and footer alone is printed in the 2nd page, i am not getting the first horizontal line for the footer and it does not look like a table in second page.
    My smartform table exactly looks like this when printed in a single page.
    |_________|______________|_________________|____________|________________|__________|  - Header
    |_________|______________|_________________|____________|________________|__________|  - Main Area
    |_______________________________________________________|___________________________|  - Footer
    When the footer alone is printed in second page, i want to print as
    |_____________________________________________________|__________________________|  - Footer
    But its printed as
    |_____________________________________________________|__________________________|  - Footer
    When the item records are printed in multiple pages, i will have header and item records in every page. The problem comes only when the footer alone gets printed in separate page.
    Please suggest me how to fix this issue. Thanks in advance.
    Rajesh.

    hi rajesh..
    check the line type for that footer. It's getting displayed properly on multiple pages because the lower line of other rows is getting overlapped on the upper one of footer. This is why you dont recognize it.
    On single page there arent any other rows. So it shows a blank.
    So as samreen said make the top line of that line type bold.
    Regards,
    Sumit.
    Edited by: Sumit Nene on Aug 28, 2009 7:02 AM

  • Regarding- Packing Line Item Not Displayed in the Delivery Document.

    Hi,
    I have 2 queries
    1) Have  created separate Material Type Packaging for my packing material and the item category group used is VERP, my Orginal Material is getting packed in the Delivery Document, however the packed item is not coming as a separate line item in the Delivery document, I have maintained the item category settings for the Delivery Packing Material and also the packing Material contains stock,
    2) The Plant and Storage Location for my handling unit need to get defaulted autmatically in the delivery document what settings should I configure for the same.
    Kind Regards
    Atul Keshav

    Hi,
       Find the below threads, which is explained in context with returnable packaging, same will be useful for you.
    [Re: returnable packaging]
    [Returnable packaging process;
    Regards,
    Reazuddin MD

Maybe you are looking for