Journalctl--Can't figure out hp-config_usb_printer problem

My CPU is maxing at 100%. I ran 'top' to find out what is taking up my CPU and found that systemd-journal is taking it up. I found a post that said to run '# journalctl -f' to find what errors are being run. I am finding this error:
Nov 17 14:05:09 RyansLinuxBox hp-config_usb_printer[309]: Would you like to specify the path to the correct PPD file to use (y=yes, n=no*, q=quit) ?
I get around 100 of this exact message every minute. I searched around and couldn't find out what's wrong. I don't have my HP printer plugged in, I uninstalled 'hplip' and removed my printer from CUPS. What on earth could be the problem?
Last edited by ryanmichaelmcclure (2013-11-17 19:14:50)

I'm having a similar issue. I *do* have my HP printer connected and turned on. I'm trying to add it to CUPS via the web interface (the machine in question is a headless server). Using journalctl --follow, I've noticed that the flood of that message starts after I select the printer and click "continue". The next steps take a long time to load, but they do go seemingly fine, until I select the driver and go to the next page, where I get "Failed to add printer: Broken Pipe"
My best guess is that HPLIP is broken... no surprise since it's HP. Though, why this would still be plaguing you after uninstalling HPLIP, I'm not sure, as pacman -Qo /usr/bin/hp-config_usb_printer shows that it is owned by the HPLIP package. What command did you use to remove HPLIP? pacman -Rns?

Similar Messages

Can't figure out what the problem is, please help!

Hey, so I have a Mac Mini which I bought nearly 3 years ago. I've been running the latest system 10.6.6, when the issues started. Everything would just unexpectedly quit and occasionally, I'd get the "You need to re-start your computer..." grey screen, also the desktop would refresh itself and not open any folders or anything at all. Finder, Console, Dashboard Client, etc all quit,´and sometimes the nmblookup thing would pop up, but before I could click Allow or Deny, it'd dissappear again.
I ran the Hardware Test, and four times out of seven it said "No Trouble Found" while three times out of seven it gave me an error code starting with 4MEM. The system profiler, meanwhile, told me that both RAM cards were OK. I did the Hard Drive verification through Utilities and it gave me some problem starting with "Key..." and said it could not be repaired.
SO, I reformatted the HD as it suggested, deleting everything (I've got it backed up though). Then, I installed Snow Leopard again, and the issues were still present. It would Quit Unexpectedly freeze up, etc. So then I went and erased the hard-drive again, and a new partition was made automatically. After that, I tried installing the original software which came with the computer. Except that after Installation Disk 1 was finished, the computer restarted and then it was just a blue screen. Nothing. It didn't ask for the second disk or aything. I tried again, and in the middle of Disk 2 Installation the grey "You need to re-start..." screen came down. ***. Now, I can't seem to install ANY Mac OS X on my computer, not what it came with, not the Snow Leopard, nothing.
Again, Hardware Tests tells me everything is ok, and the Hard Drive also says there's nothing to repair. Then what is this? I don't even know what it could be anymore! Please help if you have an idea of what this might be! Unfortunally, at the moment I have no money to send it to the repair so they'd check=/
Thanks in advance, any help would be greatly apreciated!

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Error message I can't figure out

Can anyone help with this problem: Whenever I try to save a video I created I get a file error:illegal name message. I can not figure out where the problem is or how to fix it. This occurs near the end of the saving process.
file name is final ceremony and reception 2-26-10

OSX has certain character strokes that are not to be used in file names. It's most likely the cause.
You can Google a full list.
Al

I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

Trying to get into the app store and it asks for my password. The problem is that it is showing an Apple ID I don't use ghosted in. I can't figure out how to use my correct ID.

Trying to get into the App Store to update some apss. It asks for my password but the problem is that it is showing ghosted an Apple ID I don't use. Can't figure out how to fix it.

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

. I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

Hello:
I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
Please Help
maxsdad

B-Rock:
Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
I was able to encode 5 full length music videos, but the results were distorted (video and audio).
I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
Thanks again for all your help.
maxsdad

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

What is the problem that you are having ? If you are getting an error message then what does it say ?

I can't download any apps, it keeps telling me "There is a billing problem with a previous purchanse"! I've checked all my account info and can't figure out the prob??

I can't download any apps, it keeps telling me "There is a billing problem with a previous purchanse"! I've checked all my account info and can't figure out the prob??

Contact Itunes support and ask them

App Store download problem, need to reinstall and can't figure out how?

App Store was interrupted during download and is not usable. I need to reinstall but can't figure out how to since all other items updated after Snow Leopard upgrade. Can anyone walk me through what to do?

Neither Adobe Reader nor Flash Player can convert files. May be possible with Flash Professional; ask in that forum.

Can't figure out how to use home sharing

Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!

The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

An mp3 file on my computer will not import to itunes by either the drag-and-drop or the Add File to Library method. Can't figure out what I'm doing wrong. My OS is Windows 7.

I purchased an mp3 from a private website on my laptop. The itunes library i sync ipod to is on my desktop, so i copied the mp3 onto a flash drive and then into my desktop in the Downloads folder and Desktop folder as well as the itunes music folder, 3 places. I opened itunes on the desktop and read the instructions for importing music that's already in my computer. Neither the drag-and-drop or the Add File to Library method works. I've tried both ways over and over. Cannot figure out what the problem is. I do note that the name of the mp3 file doesn't show the .mp3 extension, it appears as simply it's title, Eating Healthy, without any extension at all. Could the filename be the problem, or do you have any other idea what I'm doing wrong? My OS is Windows 7, using IE9. Thanks.
ADDENDUM AFTER READING ANOTHER DISCUSSION HERE: I have now tried right clicking the song in Windows Explorer and choosing Open With, clicking itunes. The mp3 plays in itunes but does not add to the library.

I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.

I am having trouble setting up icloud it keeps sending me back to install instructions and I'm just getting frustrated. So far I'm not liking the new itunes I can't figure out how to look at my duplicate music like I used to.

I can't sign on to icloud. It says I need an icloud account. I click the help option it send me back to the same page. I reinstall it nothing.
Download the iCloud Control Panel.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).
ok I can't seem to set up iCloud on any device I don't understand... Ive already installed it three times.
Turn on iCloud.
From the Windows Start menu, choose iCloud Control Panel.
Enter the Apple ID you used to create your iCloud account and select the iCloud services you’d like to enable.
For mail, contacts, and calendars, you can use iCloud.com or Outlook 2007 or later.
there is no iCloud control panel but I click on i cloud. Then entere the Apple ID you used to create your iCloud account - WHAT!!!!? where is this I keep trying to find out how to create and iCloud account but I keep getting these stupid directions!!!
Enable automatic downloads.
To enable automatic downloads for your music, apps, and books, open iTunes > Edit > Preferences > Store and select Music, Apps, and Books.* (Requires iTunes 10.5 or later.)
- This is the only step that makes sense and already did it...
Turn on iCloud for the rest of your devices.
To get the most out of iCloud, set it up everywhere.
This is soooo frustrating!!!!
Also I want to be able to look at duplicate songs on my itunes but after I downloaded the new version I can not figure out how to get that back. If the duplicate setting isn't in the new itunes I want the old version back.

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

I am trying to connect my new iMac to my Buffalo router. I forgot my router password, so I reset it and it is working. I can't figure out how to reset my router password and lock it on my iMac.

I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!

kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

I'm trying to connect a BlueTooth headset to my Mac Mini. I can discover it, but soon after discovery it disconnects. Can't figure out how to reconnect. My only option seems to be re-discovery

I can discover the headset, but soon after discovery it disconnects. Haven't been able to figure out how to try to re-connect. And the help section titled "Use BlueTooth has absolutely no information on how to use it. All I can do is re-discover it. Every time I rediscover it, it disconnects shortly afterward. This headset works well with both my iPhone and iPad and has for quite some time. But it won't stay connected to my Mac.

Tried with another headset that works fine with iPhone and iPad. An LG HBS700. Same problem. It connects for maybe 10 seconds and then disconnects. So it must be a problem on the Mac. But this Mini is out of warrentee so taking it into an Apple store to get it repaired isn't a good solution. Maybe as a last resort.
Is there a way to select connect on the Mac? Everything else I've connected a BlueTooth device to has both a command for pairing and a command for connecting or reconnecting. I can't figure out how to select connect on the Mac.

Journalctl--Can't figure out hp-config_usb_printer problem

Similar Messages

Maybe you are looking for