Journaling External FireWire and USB 2.0 Hard Drives?

I have several FireWire and USB 2.0 Hard Drives which I have always formatted as "Mac OS Extended (Journaled)".
I have been told that journaling is a waste of time with external HDs and, if anything, will slow them down slightly.
What is the general consensus on this forum?

Thank you for the swift response Malcolm.
I better explain why after all these years I am having doubts.
I am awaiting the delivery of a new piece of kit - a Western Digital HD TV Media player. Basically, you put your hi-def videos (H.264) on a USB 2.0 HD, plug it into the media player which is then plugged into your HDTV.
I have got hold of the manual which says that the supported USB file systems are "FAT32, NTFS and HFS+ (no journaling).
So I was wondering whether I will have to format the HD without Journaling to make it work?

Similar Messages

I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? One I back everthing up on the TC, can I delete everything off of my MAC?

I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??

Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups.

Firewire and USB

In my process of researching to buy a new Intel Macbook I've discovered that there is only one firewire port, two USB 2.0 ports, and no pcmcia port.
Here's my problem. This laptop will replace my old powerbook that I use for recording audio. I need one bus for audio to enter the laptop and one bus to access my external hard drive to write the audio. I currently have a firewire bus card in the pcmcia slot and use the firewire port for the other bus on my powerbook. This optimizes the amount of data that Logic can process. My worries with the new macbook is that USB 2 is typically slower than firewire. So using the firewire and USB 2.0 ports may slow me down. I know the old powerbooks with USB 2.0 had issues with the USB 2.0 bus being really slow compared to PCs. Was this problem ever fixed? Does anyone have any experience with this or any suggestions? I know I could just buy a macbook pro, but I really didn't want to spend that much money.

Actually there's more than just another FW port. It's a FW800 port, ExpressCard/34 expansion slot, faster and better GPU with more VRAM, faster CPU, more RAM, bigger hard drive, and higher resolution screen.
You're buying a business computer. That means you are making an investment. You can write off the investment which reduces taxes. Doesn't it make better sense to be dollar wise rather than penny foolish? Over a three year write-off period you're bartering over $250 per year.
The MacBook has no expansion future whereas the MacBook Pro does.
However, this is ultimately your decision. All I wanted to do was point out the benefits of the MBP over the MB. I should probably stop here lest I sound like I'm making a sales pitch - which I'm not. I own a MacBook and two MBPs. I like them both.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Is it possible to connect an external USB 2.0 hard drive to a Thunderbolt Display?

Hello,
Is it possible to connect an external USB 2.0 hard drive to a Thunderbolt Display and back up a MacBook Air to the external hard drive using Time Machine?
I intend to connect my MacBook Air to the Thunderbolt Display using a Thunderbolt cable.
I would also like to connect my printer via USB 2.0 to the Thunderbolt Display. Will this also work?
Effectively using the Thunderbolt Display as a USB hub or docking station.
Regards,
Ben

Ok, thanks.
My 1 cable to ThunderBolt Display objective
MacBook Air -> (via 1 x Thunderbolt cable) -> Thunderbolt Display -> (via 1 x USB cable) -> USB 2.0 external hard drive
I would like to know if this configuration is possible and Time Machine will run correctly.
Your 2 cable suggestion (I think)
MacBook Air -> (via 1 x Thunderbolt cable + 1 x USB cable) -> Thunderbolt Display + USB 2.0 external hard drive
This configuration requires 2 cables to disconnect/reconnect from my MacBook Air.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

External USB 2.0 hard drive reconnects on its own after power-down

I have an external USB 2.0 hard drive which I'm trying to power off (after unmounting all partitions, of course) using:
$ udisksctl power-off --block-device /dev/sdb
When I do this, the drive spins back up after a few seconds. Only when I issue the same command again does the drive stay powered off.
I'm running:
linux 3.13.7-1
udisks2 2.1.3-1
This is what I see in the journal log when I:
- Plug in the drive's USB cable
- Issue the power-off command
- After the drive spins up again, issue the command again
Mar 29 19:51:01 miki-desktop kernel: usb 1-5: new high-speed USB device number 10 using ehci-pci
Mar 29 19:51:01 miki-desktop kernel: usb-storage 1-5:1.0: USB Mass Storage device detected
Mar 29 19:51:01 miki-desktop kernel: usb-storage 1-5:1.0: Quirks match for vid 1058 pid 0704: 8000
Mar 29 19:51:01 miki-desktop kernel: scsi12 : usb-storage 1-5:1.0
Mar 29 19:51:01 miki-desktop mtp-probe[21301]: checking bus 1, device 10: "/sys/devices/pci0000:00/0000:00:04.1/usb1/1-5"
Mar 29 19:51:01 miki-desktop mtp-probe[21301]: bus: 1, device: 10 was not an MTP device
Mar 29 19:51:02 miki-desktop kernel: scsi 12:0:0:0: Direct-Access WD 5000BMV External 1.75 PQ: 0 ANSI: 4
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Write Protect is off
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:02 miki-desktop kernel: sdb: sdb1 sdb2
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:02 miki-desktop kernel: sd 12:0:0:0: [sdb] Attached SCSI disk
Mar 29 19:51:47 miki-desktop udisksd[21107]: Powering off /dev/sdb - successfully sent SCSI command START STOP UNIT
Mar 29 19:51:47 miki-desktop udisksd[21107]: Powered off /dev/sdb - successfully wrote to sysfs path /sys/devices/pci0000:00/0000:00:04.1/usb1/1-5/remove
Mar 29 19:51:47 miki-desktop kernel: usb 1-5: USB disconnect, device number 10
Mar 29 19:51:47 miki-desktop kernel: usb 2-5: new full-speed USB device number 9 using ohci-pci
Mar 29 19:51:48 miki-desktop kernel: usb 2-5: not running at top speed; connect to a high speed hub
Mar 29 19:51:48 miki-desktop kernel: usb-storage 2-5:1.0: USB Mass Storage device detected
Mar 29 19:51:48 miki-desktop kernel: usb-storage 2-5:1.0: Quirks match for vid 1058 pid 0704: 8000
Mar 29 19:51:48 miki-desktop kernel: scsi13 : usb-storage 2-5:1.0
Mar 29 19:51:48 miki-desktop mtp-probe[21555]: checking bus 2, device 9: "/sys/devices/pci0000:00/0000:00:04.0/usb2/2-5"
Mar 29 19:51:48 miki-desktop mtp-probe[21555]: bus: 2, device: 9 was not an MTP device
Mar 29 19:51:49 miki-desktop kernel: scsi 13:0:0:0: Direct-Access WD 5000BMV External 1.75 PQ: 0 ANSI: 4
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] Write Protect is off
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] Mode Sense: 23 00 00 00
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:49 miki-desktop kernel: sd 13:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:52 miki-desktop kernel: sdb: sdb1 sdb2
Mar 29 19:51:52 miki-desktop kernel: sd 13:0:0:0: [sdb] No Caching mode page found
Mar 29 19:51:52 miki-desktop kernel: sd 13:0:0:0: [sdb] Assuming drive cache: write through
Mar 29 19:51:52 miki-desktop kernel: sd 13:0:0:0: [sdb] Attached SCSI disk
Mar 29 19:52:20 miki-desktop udisksd[21107]: Powering off /dev/sdb - successfully sent SCSI command START STOP UNIT
Mar 29 19:52:20 miki-desktop udisksd[21107]: Powered off /dev/sdb - successfully wrote to sysfs path /sys/devices/pci0000:00/0000:00:04.0/usb2/2-5/remove
Mar 29 19:52:20 miki-desktop kernel: usb 2-5: USB disconnect, device number 9
What is interesting is that on first connect, the drive is using ehci-pci driver, then after the first try powering it off, the drive appears to reconnect using the ohci-pci driver. Not just that, it appears to 'jump' from one USB bus to another. How is this even possible?
$ lspci
00:00.0 Host bridge: NVIDIA Corporation MCP73 Host Bridge (rev a2)
00:00.1 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a2)
00:01.0 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.1 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.2 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.3 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.4 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.5 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:01.6 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:02.0 RAM memory: NVIDIA Corporation nForce 630i memory controller (rev a1)
00:03.0 ISA bridge: NVIDIA Corporation MCP73 LPC Bridge (rev a2)
00:03.1 SMBus: NVIDIA Corporation MCP73 SMBus (rev a1)
00:03.2 RAM memory: NVIDIA Corporation MCP73 Memory Controller (rev a1)
00:03.3 Co-processor: NVIDIA Corporation MCP73 Co-processor (rev a2)
00:03.4 RAM memory: NVIDIA Corporation MCP73 Memory Controller (rev a1)
00:04.0 USB controller: NVIDIA Corporation GeForce 7100/nForce 630i USB (rev a1)
00:04.1 USB controller: NVIDIA Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1)
00:0a.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev a1)
00:0b.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev a1)
00:0c.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: NVIDIA Corporation MCP73 PCI Express bridge (rev a1)
00:0e.0 IDE interface: NVIDIA Corporation MCP73 IDE (rev a2)
00:0f.0 Ethernet controller: NVIDIA Corporation MCP73 Ethernet (rev a2)
01:06.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710 [Radeon HD 4550]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
$ lsusb
Bus 001 Device 009: ID 1058:0704 Western Digital Technologies, Inc. Passport External HDD
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 007: ID 15ca:0101 Textech International Ltd. MIDI Interface cable
Bus 002 Device 003: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard
Bus 002 Device 002: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Before the first power-off attempt:
$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 7, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 4: Dev 7, If 1, Class=Audio, Driver=snd-usb-audio, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
|__ Port 5: Dev 9, If 0, Class=Mass Storage, Driver=usb-storage, 480M
After the first power-off attempt:
$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 7, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 4: Dev 7, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
Does anyone know how to fix this problem? Is it a device quirk, a driver bug or something?
Last edited by ackalker (2014-03-29 19:21:04)

Just to be sure, I rebooted my system, shut down lightdm from another VT, made sure that really nothing is using the drive, no partitions are mounted, no services that could try to use the drive (except udisks2.service, could this one be the problem? But how am I supposed to use the udisksctl command when the service isn't running?).
Tried the same command again. same result: I needed to run it twice in a row for it to 'take'.
What I find even more fascinating: how can a USB device jump from one USB bus to another like that? I've honestly never seen anything like this before :-)
Last edited by ackalker (2014-03-29 19:35:29)

Seeking reliable firewire and usb 2.0 combo cardbus card

Subject line says it all, or mostly so. I have an IoGear GUF202 pcmcia card with two USB 2.0 ports, one six-pin FireWire port, and one four-pin FireWire port. Its USB 2.0 services are not reliable; sustained transfers freeze my 1Ghz Titanium PowerBook G4. I've seen online several other cards from different manufacturers with the same form factor, but haven't yet found one with the preferred NEC chipset for USB services.
Can anyone offer a recommendation -- and a source? Swapping separate FireWire and USB 2.0 PC cards is becoming a pain.

Hi Jamie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

How do you reset the firewire and USB? My ports are intermittent. I suppose

How do you reset the firewire and USB ports? My ports are intermittent. I suppose it could be a hardware isssue, but still wonder if I can reinstall/reset the software without reformatting my drive.

Hello! Resetting the ports is done by resetting the pmu. press the button once with all external cables unhooked. Below is a pict of an example of the pmu location. Also an intermittent problem is often a bad cable. Tom
[IMG]http://img470.imageshack.us/img470/1623/mddlogicbd4ga.jpg[/IMG]

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space. How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology? It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists. I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library. In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
Thanks for any support ;-)
Eaglerocker

Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

Firewire and USB not usable

my friends machine is no longer using devices connected to the firewire and USB ports. Here is the description of troubleshooting steps so far. Any other suggestions?
--- snip ---
suddenly my G5 tower stopped recognizing any firewire device... no harddisk no soundcard.... also the same harddisk is not recognized via USB....
BUT.... the USB ports recognize USB sticks, mac keyboard, mouse.. no problemo.
also.. at the same moment the built in soundcard (mac av) stopped working, AND the internal CD drive !!!
i tried : flashing the PRAM ... on boot up hold down command, option, P, and R until the machine reboots it's self then let off the keys...
and; resetting the PMU:
1. If the computer is on, turn it off.
2. Disconnect ALL cables from the computer, including peripherals and power.
3. If possible, move the computer to a place where you are not standing on carpet.
4. Open the case and ground yourself by touching part of the metal frame inside the computer.
5. Find the Cuda or PMU button
6. Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
7. Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
and i tried: resetting NV-RAM
Re-start holding the O,F, option, and command keys until a white screen is reached, this will be the open firmware
screen. You will be prompted to release keys at this point.
Type in the command line, reset-nvram. Press enter, next command line type in, reset-all and the computer will re-boot.
so.... i have no more solutions at this point !!!

gromit95 wrote:
replaced battery did not fix problem
condition of new battery questanable exp date march 2010 but it was a new battery
fred
That date code was probably the build date code, rather than the expiration. This would be true for either the Tadiran or Saft batteries. The lithium batteries have a shelf life of up to 10 years.

Firewire and USB ports not recognizing devices

All of a sudden, some of our MacBooks don't recognize firewire and usb devices. It's weird, but after about a week, one of the MacBooks suddenly started recognizing a video camera, again, but it's troubling because my users need to be able to import movies and pictures from digital devices.
We ran the updates, and it did not help. We have been using these devices with our MacBooks for over a year, and this happened at the worst possible time. Any ideas?
I've tried both self- and AC-powered devices, rebooted, powered off and on, made sure everything is plugged in, etc.

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Firewire and USB PCI Upgrade for PowerMac G5

Firewire and USB PCI Upgrade for PowerMac G5
I am looking to add more Firewire 400 and USB 2.0 ports to my Dual 2.7 PowerMac G5. I don't need a combo card (two separate cards is fine). I was wondering which brand card works well with my Mac and OS X. I had a FireWire card that I moved from my Dell to my PowerMac but had a number of problems with a couple connected HDD's and Final Cut Pro. The card which I think was from Belkin was listed as OS X compatible on its packaging.
Thanks for any guidance.
- Lou

Check out OWC/Macsales. Usually can't go wrong with Sonnet or an OWC "house branded".
http://www.macsales.com
Check out user reports for PCI G5 Compatibility
http://www.xlr8yourmac.com
I've used OWC FW800, Aaxeon PCIe, and a number of Sonnet USB2 (and combo).
Depends on how many USB2 ports, but for FW400 and USB2 combo should do fine. With FW800 I'd go for independent cards.

Journaling External FireWire and USB 2.0 Hard Drives?

Similar Messages

Maybe you are looking for