JPanel Binding - Find Mode

I have a JClient application with a data panel and JUNavigation bar. Find mode lets me use the data panel to enter search criteria but I don't know how to programatically determine if the "Find Mode" is enabled?
All thoughts and suggestions are welcome.
Elder

Hi Frank, thanx for the reply.
I didn't think of checking the methods of the panel binding (was looking at the JUNavigation bar)...but upon doing so I found a "setFindMode(boolean)" but no "getFindMode". I didn't see anything in the VO.
There must be a way of "getting" the current mode and I'm probably overlooking something really simple.
Again, I appreciate your help.
Regards,
Elder

Similar Messages

ADF Faces w/ADF BC: Bug(?) w/null values in drop down list in find mode

Using JDev 10.1.3.0.4.
I have a page that shows a single record. The user can toggle between regular and Find mode to enter query by example criteria.
One of the fields has been bound to a dynamic list. The "No Selection" Item in the List Binding Editor is set to "Selection Required".
When editing a record, this list does not have an empty item. When the user enters find mode, the list has an empty item in the list - which makes sense since the user might not want to search on a value in that particular field.
However, if the user enters find mode, selects an item from the list, executes the query (Execute action), and enters find mode again then the empty item no longer shows up in the list. Is this a bug?
(Note - there is an easy workaround - if you delete and create in find mode, then the new critieria record has the list fixed with an empty item in it.)

Using JDev 10.1.3.0.4.
I have a page that shows a single record. The user can toggle between regular and Find mode to enter query by example criteria.
One of the fields has been bound to a dynamic list. The "No Selection" Item in the List Binding Editor is set to "Selection Required".
When editing a record, this list does not have an empty item. When the user enters find mode, the list has an empty item in the list - which makes sense since the user might not want to search on a value in that particular field.
However, if the user enters find mode, selects an item from the list, executes the query (Execute action), and enters find mode again then the empty item no longer shows up in the list. Is this a bug?
(Note - there is an easy workaround - if you delete and create in find mode, then the new critieria record has the list fixed with an empty item in it.)

JButton in table cell in Find Mode

Hello!
I have JButton in JTable cell for calling LOV.
When form goes to Find Mode all JButtons become disabled.
Accordingly, I want that buttons active. Any help will be appreciated %)

If the button is bound with an LOV Button binding, then I believe the framework checks the queryable property of the "target" attribute. Make sure that attribute has the "queryable" property checked in the View/Entity.
Hope this helps.
Erik

Choose from list in find mode

I have a form build in Screen painter and i have added a Choose from list to that form. I have asocieted the CFL with a EdiText. It work perfectly in add mode, but i cannot open the CFL when the form is in find mode.(I cannot even see the button to press for oppening the CFL). Can someone help me?

I am in the phase of binding the edittext, comoboxes and other controls on my form. I want to search by parameters. For instance i want to find all the entrys from a business partener.
I would like to know if I can choose from a list of business partener when i am in a find mode using CFL .
My problem it is not when i click find button but when i complete the fields, how can i select a business partener from a list?

Help Using Navbar Find mode with dynamic viewobjects,

What needs to be added to my coded to make the JUNavigatorBar QBE function in the "ADF Swing: Binding dynamically created ViewObjects to ADF Swing" example posted by Frank Nimphius on March 07, 2006. My table loads from the dynamic viewobject and the Navbar moves the cursor over each row in the table but when I go into Find mode ,the table row for entering the search criteria is not editable. I must be missing something basic here, but I am at a lost for the solution.

Ok, I found this solution to make the dynamic view objects example 'searchable' from the NavigatorBar 'Find' button.
I had to extend and replace the JUTableBinding class when creating a TableBinding which is then set as the model for my dynamic JTable using .setModel(); The rest of the example code works without modification.
class MyJUTableBinding extends JUTableBinding{
public MyJUTableBinding(javax.swing.JTable control,
JUIteratorBinding iterBinding,
java.lang.String[] attrNames){
super(control, iterBinding,attrNames);
public boolean isCellEditable(int row, int col) {
return true;
}

How to escape a single quote in a find mode view

Hello,
I'm working with JDeveloper 10g.
I've defined a view that is used in "find mode" in a JSP.
When a value with a single quote is inserted in a field of the search form, an exception is thrown:
JBO-27122: SQL error during statement preparation.
ORA-00907: missing right parenthesis.
The problem is that the "single quote" is not being escaped:
WHERE STREET LIKE 'ABAT ESCARRE, DE L'A'
How could I force the view to escape the "single quote"?
Thanks

Arrest the single quote by calling a javascript method.
This might help you
Re: af:clientListener javascript function call question
http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_clientListener.html
Edited by: Srinidhi on Mar 23, 2011 3:46 PM

Problem with "find" mode in adf/swing application

Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.

Hi Frank, please look this issue

Open Purchase Order Form in Find Mode

Hi,
I have to open the Purchase Order Form in Find Mode.How to open in Find mode?.
I Used the Following Code in Form_Load && Action_Success=true
if(oForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE)
oForm.Mode = SAPbouiCOM.BoFormMode.fm_FIND_MODE
But it is not working.Please help me to solve this.
Regards,
M.Dhivya

call
ActivateMenuItem( "1281")
in application object.

How to disable a Entire row in a Matrix in Find Mode (User Form)

Hi,
How to disable a Entire row in a Matrix in Find Mode (User Form)
Regards
Jambu

Hi,
Iam using Bubble event = false in click event but the matrix row
is allow to edit but we cant save the document in Find Mode That is fine.
What is my actual requirement is In find mode matrix Row not allow to enter the data .
For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
save the document. Whwn i open the document in find mode the three row is not allow
to editable like the same functionality of PO, sales Order, etc ..
Regards
Jambu

How to look at a query string from Nav Bar Find Mode

I would like to view the resultant query string from the Navigavtion Bar's Find Mode. I am using a Master/Detail and am querying with the selection criteria from the detail only.
I am getting unexpected results, and would just like to SEE what the query string IS.
Thanks

I am getting unexpected results, and would just like to SEE what the query string IS.Run your app with diagnostic output turned on. Here's the instructions for that.
To turn on diagnostic, go to the IDE,
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window.
This should also include the findmode query that gets built after you hit the execute button from a findmode panel.

How to use CFL in Business Partners Master in Find Mode

Hi,
I have a problem in Business Partners Master Form. I need add conditions in Choose From List in Find Mode when I set an asterisk in the CardCode TextField for filtering the businnes partners list.
When I capture the et_CHOOSE_FROM_LIST itemEvent in BeforeAction, I can't get the ChooseFromList ID for adding the conditions in the ChooseFromList Object.
Sample Code:
Public Sub ItemEvent(ByVal FormUID As String, pVal As SAPbouiCOM.IItemEvent, BubbleEvent As Boolean)
      Select Case pVal.EventType
            Case et_CHOOSE_FROM_LIST:
                Dim lcflE As SAPbouiCOM.ChooseFromListEvent
                Dim id As String
                Set lcflE = pVal
                id = lcflE.ChooseFromListUID -> The ID is "-1"
      End If
End Sub
Thank's in advance
Best Regards

Hello Rafea,
if you can't get it via lcflE.ChooseFromListUID -> The ID is "-1",I guess you need to know choosefromlist UID by test one by one with oForm.ChooseFromLists.Item(i). Or you can save the fom as xml then chech the CFL UID.
If pVal.FormType = 139 And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST Then
            If pVal.ItemUID = "4" Then
                If pVal.InnerEvent And pVal.Before_Action Then
                    BubbleEvent = False
                    Dim oForm As SAPbouiCOM.Form
                    oForm = SBO_Application.Forms.Item(FormUID)
                    Dim oCons As SAPbouiCOM.Conditions
                    Dim oCFL As SAPbouiCOM.ChooseFromList
                    'oCFL = oCFLs.Add(oCFLCreationParams)
                    oCFL = oForm.ChooseFromLists.Item("2")
                    oCons = oCFL.GetConditions()
                    'Note: Add the condition only once.
                    If 0 = oCons.Count Then
                        Dim oCon As SAPbouiCOM.Condition
                        oCon = oCons.Add()
                        oCon.Alias = "Cardcode"
                        oCon.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                        oCon.CondVal = "C0001"
                        'Set your own condition here instead of the system conditions
                        oCFL.SetConditions(oCons)
                    End If
                    BubbleEvent = True
                End If
            End If
        End If
Kind Regards
-Yatsea

Form should not be in find mode

Hello Experts,
I have created one form but I am not putting Add button on form. When I load this form and did control + F then CFL is not working. This form going in find mode. I dont want this form in find mode. What sould I do? Please help me sir.
Thank You
Regards,
Prashant

Hi,
Try this
if pVal.MenuUID = "mnu_MD" and pVal.BeforeAction = False
LoadFromXML("CustomForm.xml")
Soft_Form = Soft_Application.Forms.Item("formID")
Soft_Form.EnableMenu("1281", false)
end if
Reply Me

Updating a user text field in sap system form in Find Mode

Dear All,
                I created a Edit text field in Sap System form [FormType :149] -Sales Quotation. I want to update a value to the text while clicking OK button in Find Mode. the code is given below.
If pVal.ItemUID = "1" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE And (Not pVal.Before_Action) And pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
        oForm = SBO_App.Forms.Item(FormUID)
        oForm.Freeze(True)
        oItem = oForm.Items.Item("txtUID")
        oEdit = oItem.Specific
        oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
        oItem = oForm.Items.Item("txtCampgn")         ' // User created field
        oItem.Enabled = False
        oEdit = oItem.Specific
        If oRS.EOF = False Then
            oEdit.Value = oRS.Fields("CMNAME").Value
        Else
            oEdit.Value = ""
        End If
end if
while clicking the OK button, Based on the value fetched on the screen, I have to open a recordset and get the value. But, the screen loads the value to the system textboxes. I could not get those value to run the Sql in the event. it returns empty. Could any one help please how to solve this ?
Thanks in advance.
Manikandan.

Hi,
Try This..
If pVal.FormType = 149 And pVal.ItemUID = "1" Then
            If pVal.FormMode = SAPbouiCOM.BoFormMode.fm_FIND_MODE Then
                If pVal.Before_Action = False Then
                    If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
                        Try
                            oForm = SBO_App.Forms.Item(FormUID)
                            oForm.Freeze(True)
                            oItem = oForm.Items.Item("txtUID")
                            oEdit = oItem.Specific
                            oRS = ConSBOdb.Execute("Select * from BG_CAMPAIGNSHDR where CMIDENT ='" & Trim(oEdit.Value) & "'")
                            oItem = oForm.Items.Item("txtCampgn") ' // User created field
                            oItem.Enabled = False
                            oEdit = oItem.Specific
                            If oRS.EOF = False Then
                                oEdit.Value = oRS.Fields("CMNAME").Value
                            Else
                                oEdit.Value = ""
                            End If
                        Catch ex As Exception
                            SBO_application.MessageBox(ex.Message)
                        End Try
                    End If
                End If
            End If
        End If
Best Regards,
Mahendra

Form in Find Mode

Hai,
After matrix is loaded the "Add" button changes to Find mode. I need "Add" button to be in "Add" mode after the data gets loaded into the matrix.
when i click any row in the matrix button should change to update mode automaticall as SAP Businees one scree does.
In the screen painter i have used AutoManaged = "True" and below given to load the matrix.
Public Sub Getdata()
        Dim oDBDataSource As SAPbouiCOM.DBDataSource
        Dim oUserDataSource As SAPbouiCOM.UserDataSource
        Dim oMatrix As SAPbouiCOM.Matrix
        Dim i As Integer '// to be used as counter
        '// getting the data sources from the form
        oDBDataSource = oForm.DataSources.DBDataSources.Item("@PSSIT_COUNT")
        '// getting the matrix from the form
        oMatrix = oForm.Items.Item("3").Specific
        oMatrix.Clear()
        '// Querying the DB Data source
        oDBDataSource.Query()
        For i = 0 To oDBDataSource.Size - 1
            oDBDataSource.Offset = i
            oMatrix.AddRow()
        Next i
        oMatrix.AutoResizeColumns()
    End Sub

Hai,
Please let me know where i can define the "Support modes" of the form.
I have designed the screen in screen painter and save as "srf" format. I have loading the form in the same format.
regards
Suresh S

Open Users Setup form in Find mode

Hello,
When I open the users form
Administration
---Setup
General
Users
this form is in Add mode. Is there a way to have it in find mode directly ?
Thank you
Sébastien

Hi,
It is not possible to have the User - setup in the Find mode default.
The form opens in the Add Mode and you have to go to the Memo and click on Find or do a Ctrl + F.
Regards,
Jitin
SAP Business One Forum Team

JPanel Binding - Find Mode

Similar Messages

Maybe you are looking for