JPD Document Upgrader options in Weblogic 10.3.1 not working

Anybody have any idea why this option is not working in weblogic 10.3.1?

I am able to resolve the problem and JPD is upgraded now in my application. But I am facing an issue of deploying WLI application in Weblogic 10.3.1 server. When I try to publish my application from Workshop by right clicking my Controller.java it got publish. But I am getting "403--Forbidden" in default browser of Workshop.
I tried to with exporting EAR of application and deployed in server after deployment I checked the "Testing" tab and I am getting error :
Errors were encountered while scanning the descriptors or deployment plan for this application. These errors are sufficiently serious that they prevent further progress in processing this request. Depending on the exact problem, more details may be available from the log.
Failed attempt to access application context for application: null
I am not getting error anywhere (Console, AdminServer.log, domain.log)
Any help would be appreciated
thanks
Edited by: user13512209 on Feb 4, 2011 12:19 PM

Similar Messages

Cannot find "JPD Document Upgrader options"

When I upgraded application from weblogic8.1 to weblogic10.2,the application exist jpd ,dft and xq files. I want to upgrade them with tools, but I cannot find the “JPD Document Upgrader options” item. Does any one know why "JPD Document Upgrader options” do not appear in the upgrade wizard?
Edited by: user13316052 on 2010-6-23 上午2:26

detail log info as below:
!SESSION 2010-10-01 22:20:22.672 -----------------------------------------------
eclipse.buildId=M20080221-1800
java.version=1.6.0_05
java.vendor=BEA Systems, Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=zh_CN
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY com.bea.workshop.upgrade81 <ERROR> 2010-10-01 22:22:04.438
!MESSAGE Failed to create upgrader instance for com.bea.wli.ide.upgrade.JPDDocumentUpgrade.

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

Hi Jeffny01,
If your iPhone is not responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Regards,
- Brenden

Why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

why copy option from recent call numbers is not working on ios7 [recent call logs in phone]?

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

"Photos" option button in icloud control panel not working

Photos option button in icloud control panel not working...it is not greyed out, and it is ticked, but clicking on it has no effect. Windows 8.

luvsack wrote:
DOES ANYBODY RESPOND TO THESE QUESTIONS EVER? I HAVE THE SAME PROBLEM AND CAN FIND NO ANSWER ANYWHERE! ANSWER THE **** QUESTION PLEASE!!!!!!!!!!!!!!!!!!!!!!!
Windows 7 64
Start your own thread, and please stop shouting, it is hard to read, and who wants that.

Since upgrade to Windows 8.1, ICloud does not work

Since upgrade to Windows 8.1, ICloud does not work. I could click on buttons for Reminders, Notes, etc. and would take me into ICloud to share with other devices. No longer functions.

Hi:
I can't help you with why your PC won't upgrade to W8.1, but I can tell you that if you manage to get W8.1 to install, you won't be able to get the graphics to work anymore.
There is no W8.1 driver for the graphics setup in your PC.
So maybe it is a good thing that you can't get it to work.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.

I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

Weblogic Http Apache Plugin not working

Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
Thanks

Hi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh

I have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

i have a touchsmart 320 pc and i just upgraded to windows 8 , my touch screen not working

Just activate the Windows 8 OS via an internet connection, then install all optional, recommended and important drivers from Windows Update, reboot and it'll work.
[Windows Key] --> Control Panel --> View by: Large icons --> Windows Update --> Scan for updates

Deploy PLSQL web services on weblogic for 11g-URI not working

Dear all,
Scenario:
Using JDeveloper I deployed a web service from a PLSQL package to a war file. After that I deployed that war file on a weblogic (10.3.5) server manually not by using JDeveloper.
The deployment of the admin on the admin server is successfully done. While testing the application on the server itself again successful.
Problem:
But having an issue while trying to do the same using the URL giving in the application server.
404 -Not Found error is coming up.
Solutions tried so far:
Tried putting a html file to the created application in order to get the job done- Did not work out
Please I have no idea how to proceed. Quick responses are much appreciated.
Thank you

Hi. The [Service]-mapping.xml file is a standard "JAX-RPC mapping file" according the JSR-109 spec and WebLogic 9.2 doc ([1],[2]). That's the file that references the class. Here's a fragment:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<java-wsdl-mapping xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.1" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd">
<package-mapping>
<package-type>co.com.acme.services</package-type>
<namespaceURI>urn:Service/types</namespaceURI>
</package-mapping>
<package-mapping>
<package-type>co.com.acme.services</package-type>
<namespaceURI>urn:Services/wsdl</namespaceURI>
</package-mapping>
<java-xml-type-mapping>
<java-type>co.com.acme.services.ServiceSEI_serviceOperation_RequestStruct</java-type>
<root-type-qname xmlns:typeNS="urn:Service/types">typeNS:serviceOperation</root-type-qname>
<qname-scope>complexType</qname-scope>
<variable-mapping>
<java-variable-name>String_1</java-variable-name>
<xml-element-name>String_1</xml-element-name>
</variable-mapping>
</java-xml-type-mapping>
I'll take a look at the ant task.
Thank you very much.
[1]http://download.oracle.com/otndocs/jcp/websvcs-1.0-fr-spec-oth-JSpec/
[2]http://otndnld.oracle.co.jp/document/products/wls/docs92/webserv/jsr109.html

Now that I upgraded to Lion, my photoshop CS5 is not working. Does anyone know what to do about this?

It keeps saying I need to download Java but I'm not connected to the internet. I upgraded Java from the apple website but it's still not working.

If your iPad is an original iPad 1, that adapter does NOT work with the iPad 1.
You need to be using this.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a

Why is the sync option from iMac to iPad mini not working

I have a IMac and an iPad mini (new)
I have iPassword on my Mac and have set up the option on both Mac and iPad to sync iPassword between the 2 .
Part of this set up is setting up 'secret' word and when on the ipad all i have to do is entering the "secret" word which I have down and use the otpion to Sync Now. in
I does not work - message I receive is " Sync Problem" The operation could'nt be completed Connection refused -
Error domain - NSPOSIXErrorDomain Code +61 - The operation could'nt be completed . Connection refused
Please advise
Sue

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

I am using Iphone 4S and did the ios upgrade to ios7. after this, wifi is not working. Can any one support what could be the issue.

I am using Iphone 4S. two days before i upgraded to IOS 7 and after this wifi is not working. Any one can help. Mani

Follow the steps in the article below:
http://support.apple.com/kb/ts1559
If after all steps the issue remains then book an appointment at an Apple Stor to have the iPhone evlauated and possibly replaced.

JPD Document Upgrader options in Weblogic 10.3.1 not working

Similar Messages

Maybe you are looking for