Jpeg attachments appearing as a .dat file and not .jpeg files

Please can someone tell me how I can change jpeg attachments that are coming through on emails on my new iPhone 5 as a .dat file and not as a .jpeg file.
These .dat files cannot be opened - I assume that this will happen with PDF files as well.  
Thanks

I am surprised at this point in time no one has chimed in, seeing how many people have tried this in the pasta. I actually solved the whole clusters issue, but now I have discovered another problem that is making me throw in the towell on this one as I just can't explain it.
I am finding for some silly reason while the code will work in one VI it won't seem to work in another. See my photos below. The one where the code works, I have created the whole thing as a subroutine inside of a greater VI which I can not publish due to proprietary code. Next I tried pulling out the functioning part of the code and putting that in a stand alone file. See the photo where the code doesn't work. I have also ran the same code that doesn't work with both 1 and 2 variables. Each time Matlab can't open it. I am using the same to MAT subvi in each of these. For some reason though when I run the code in the working picture it runs, and I get a nice little mat file that I can open in Matlab. When I run the same exact code as a standalone I get the matlab error code every time.
I have tried reviewing every possible variable I can think of and worked with them. In all cases the two new VI's I made the code doesn't want to give me a valid mat file. However in the greater program it does! I am really stumped at this point. So unless I can find a better convert to matlab file code I don't think this will work.
Attachments:
where_code works.png ‏14 KB
where code fails.png ‏15 KB
matlab_error_code.png ‏23 KB

Similar Messages

  • Why when i connect my phone to my laptop do my recent photos load as image files and not jpeg

    why is it that when i connect my phone to my laptop my recent photos load
    as image files and not jpeg as they used to.Is this another issue with ios 8

    Thank you. I did that and made sure my phone was open to the camera roll. I was able to locate the import command and the photos appeared. Thanks so much!

  • Files downloaded turn into QuickTime files and not iTune Files!

    Hi folks,
    I am downloading some songs from mp3search.ru (very very cheap mp3 site) and they are downloaded as iTune files (which is what I require), however, when they download fully they become Quicktime files!
    I now have to change them individually to be opened with iTunes but they remain QT files!!
    How do I stop QuickTime from being the default and dictating itself as the main MP3 player?!
    Thanks
    Tc

    well, today I browsed iTunes, happened to find something I liked and thought I'd give it a go..
    After checking this bit:
    Import in An Instant
    To import songs into iTunes, just insert a CD into your computer and click Import CD. Or set up iTunes to automatically add music when you insert a CD. Either way, iTunes imports music in a snap. iTunes saves music from your CDs as high-quality AAC files — a format that builds upon state-of-the-art audio technology from Dolby Labs. But you can choose different audio formats, too. iTunes lets you convert music to MP3s at high bit-rate at no extra charge. Using AAC or MP3, you can store more than 100 songs in the same amount of space as a single CD. iTunes also supports the Apple Lossless format, which gives you CD-quality audio in about half the storage space.
    then registering an account I felt sort of confident, not in the lack of looking, the information is just hot air anyway rwitten by halfwits, but this was what it seemed..
    BUT LOW AND BEHOLD,
    None of this happened
    I end up with M4P files.... *** are those...
    Burning my new purchase onto a disc didn't work in my stereo
    I'm really p*ed off about this matter, measly 10 $ maybe, but the disappointment in being aggravated this way adding to increasing dismay, that you don't get anything face value from practically any commercial company anymore, seriously gets my fumes going, cos I could have gone to the record store, taken care of everybody and probably walked out with two great discs for the same price and half the time I spent sorting my anger
    I'll say it again, software designers stay the f* out of my way and start doing your jobs and provide the service you advertise using the KISS principle... stop jacking around
    H*ll even the buttons in here don't work, trying to highlight in italic the quote from iTunes store...
    Someone explain me how I get, as they state I could and should, buying my record in the iTunes store and get it on a CD so I can play it on my stereo, cause as we all know the G5 comes with f* all speakers..
    Kind regards with a bird to all these internet scams
    G5   Mac OS X (10.4.5)  

  • Why can I only download php files and not MP3 files?

    Hi,
    I have just installed firefox to download a video from facebook to my computer. Firefox only allows me to save a php file when I need an MPEG file.
    How can I address this?
    Thanks
    Faye

    try this man http://mzl.la/NxCODA

  • Welcome window problem.  appears every time i save and close a file of photoshop

    How to fix a bug regarding welcome window. this window appears every time i save and close a file of photoshop, its started after the last update 2014.2.0

    See this document: Troubleshoot Welcome Screen in Photoshop
    Scroll all the way down to the bottom. There's a check box "Don't Show Welcome Screen Again"
    You can relaunch the screen at a later date by selecting Help>Welcome Screen...
    ~ Arpit

  • In mail, my attachments, both photos and documents appear in the body of the message.  How can I get my attachments to appear as a separate attachment and not as part of the message.  Thanks for your help, Karen.

    In mail, my attachments, both photos and documents, appear in the body of the message.  How can I get my attachments to appear as a separate attachment and not as part of the main message????  Thanks for your help, Karen.

    softwater wrote:
    ...and costs $14.99
    Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
    As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
    In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
    If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
    I completely agree.

  • Time Capsule by default backup only data files and excludes program files like Photoshop, Lightroom, and MS Office, etc... right? or do I have to exclude manually?

    Time Capsule by default backup only data files and excludes program files like Photoshop, Lightroom, and MS Office, etc... right since if crash I can reinstall and not want to take up disk space for applications that I have CD to reinstall?  Or do I have to manually exclude these?

    Time Machine will back all files except files like caches, trash or temp files, you can select with file you would like to exclude by going into the Time Machine preferences.http://support.apple.com/kb/HT1427

  • How to read multiple files and generate multiple files

    Dear all, I would like to process some LTE measurement files. Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
    Attachments:
    RF Analyze IQ File.vi ‏46 KB

    There is no official "bin" format and I am confused by some of your statements:
    Kiwibunny wrote:
    Currently I can only load a single file and process the data and save it to a single binary file. Since I would like to run the code continously, could someone show me how I can modify the code to load multiple files and specify multiple files to save the process the data please? I have attached the code to the question. Many thanks for your help.
    What you could do is use "list folder" with *.bin as pattern, and use a FOR loop and iterate over all *.bin files found in a selected folder.
    In any case, your code uses some weird constructs and you seem to do way to much. Are you using "continuous run" mode? Don't!
    Use a proper state machine instead ot these stalling loops. Why do you need to query the queue after each enqueue? Why do you need a queue at all?
    LabVIEW Champion . Do more with less code and in less time .

  • How to save metadatas in RAW files (and not in external .XMP sidecar file)

    Hello,
    I would like to save metadatas (for example keywords) inside the RAW files, and not in external .XMP sidecar file.
    How to do this in Lightroom ?
    Thanks
    Josh
    PS: is XMP a file format (= .XMP files) or a metadata format that can be embedded either in a .XMP sidecar file or in the RAW itself ?

    MarvinFoster wrote:
    It's a horridly named catalog setting since if you are using DNG you don't have XMP files but it does the same thing, it updates the dng with the catalog settings.
    XMP does not mean XMP FILES per se.
    XMP is a metadata format/standard. so it´s not horrible named but simply missunderstood. 
    http://en.wikipedia.org/wiki/Extensible_Metadata_Platform
    XMP can be used in several file formats such as PDF, JPEG, JPEG 2000, JPEG XR, GIF, PNG, HTML, TIFF, Adobe Illustrator, PSD, MP3, MP4, Audio Video Interleave, WAV, RF64, Audio Interchange File Format, PostScript, Encapsulated PostScript, and proposed for DjVu. In a typical edited JPEG file, XMP information is typically included alongside Exif and IPTC Information Interchange Model data.

  • Zip files and Adobe Acrobat files

    Hello all,
    I have a couple of kinda distinct questions that I wanted to ask. I hope I've chosen the right sub-forum to post them in. My questions are
    1) when I try to unzip a .zip file in my Documents folder I get the following error message
    "Archive Utility - unable to unarchive "CdnEnergy.zip" into "Documents". (Error 1 - Operation not permitted.)"
    ditto if I move it to the Desktop and try there. This doesn't seem to be a 'space' problem as my computer is very new and I haven't loaded it up with lots of stuff. I have unzipped this file before (admittedly not on a Mac).
    2) How can I set Adobe Acrobat to be the default application for .pdf files so that when I click on a pdf file it's opened by Adobe Reader rather than the Mac Viewer? I know I can select Adobe with a Ctrl+click, but can I set it so that it's always the default?
    Thanks very much for your help,
    Eoghan

    Welcome to the Discussions!
    The first problem is not obvious, but I would suggest using Disk Utility to repair permissions. Also, you could download the free Stuffit Expander to have an alternate unzip program.
    The second problem is easy. In the Finder, select a pdf file and then select File->Get Info. In the window that appears, select the Acrobat as the Open With application and select the option to always use this application.
    bd

  • Burn music files and a pdf file?

    Is it possible to burn some music files and a pdf file on the same CD using iTunes? If not, maybe using some other software?
    Numbers

    J Cabaniss wrote:
    Is it possible to burn some music files and a pdf file on the same CD using iTunes? If not, maybe using some other software?
    iTunes can only burn files that are in its library, so forget about PDFs.
    Yes it can be done with other programs, using a data (not audio) CD format.

  • Is it possible that theseproperties are only available for files and not f

    Hello All,
    I have created few properties like ReqNo (takes Integer) and ReqDate (accepts Date). 
    I have set the above 2 properties as manadatory. Created a Group and added his goug in 'allgroups' such that I see a tab wherein I can fill in these properties.
    My questions is:
    <b>Is it possible that these properties are only available for files and not for folders</b>. The reason being that even if I create a new folder, I need to fill some values in the above two mentioned properties.
    These properties need to be mandatory and cannot make them optional.
    Please help me solve this mystery.
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu

    Hi Ritu,
    If you only want the property to be available for files and not folders you only enter data into the "Document Validity Patterns" field in the Property config.
    Regards
    Paul

  • .xml file and iTunes library files are missing from the music folder

    I recently made a second itunes library on my external hd, today when I open itunes and choose this library, the .xml file and itunes music file are invisible or translucent, therefore I can't open my library. But when I go to my music folder they are missing. Another odd thing is that all my music is still in the folder. Is there a way to re-open my library w/o re-importing all my music? Can I some how get a new itunes library file?
      Mac OS X (10.4.10)  

    This is not an answer but I have the same problem. From time to time I clone my music drive to an external drive for back up. When I do, I burn a copy of the album artwork folder, iTunes Music folder, iTunes Library.itl, iTunes Music Libraru.xml, and iTunes Library file to CDRW. This is so I can copy them into the music folder in my user home drive of my laptop then hook up the external and have access my library. Trouble is the .xml file and iTunes library files don't always show up when I go to the iTunes folder in my Music folder. There either is a blank where they should be or the names appear with no icon and when I click to select, that dissappers too. I thought I had a solve by exiting iTunes and letting it save everything. It seems to bring the .xml file back but not the itunes Library file. Any thoughts?

  • WebAnalyticsServiceApplication_ReportingDB log file and secondary DB files issue

    Hello everyone,
    So we have a problem, a customer has a SP2010 farm, SP on one server and SQL 2008r2 on another. Little (read none by the looks of things) maintenance has been applied to the server (both SQL and SP other than patching and windows backups) over nearly a year
    and we are here now to upgrade to SQL 2012, found the current state and the situation is as follows (up-to now):
    The SP install was done from the search server binaries to give better search options (thought this may be prudent to disclose)
    The WebAnalyticsServiceApplication_ReportingDB log file is HUGE and will not truncate, Ive done the following:
    backed up (full) the DB for web analytics  
    backed up log files for same DB (with truncate selected) (both through gui in SQL MS)
    Tried to shrink log file (this told me through the gui that 99% was free in the log file, but it freed up only 1%, even after trying again and selecting 'reorganise pages before releasing unused space' and selecting 0MB for the 'shrink to' size)
    Also, there are over 30 secondary DB files for this database, Ive seen other threads about these files but am stuck as how to do the following...
    no one uses the web analytics
    the data is not needed
    I understand it maybe needed in the future
    we do not need the data
    how should I get rid and stop future log file and secondary DB file growth? 
    Anyone's help would be greatly appreciated. 

    For reference, you can control how long SP keeps the Web analytics data (which does generate one extra .ndf per week).
    To set the limit on the data retention period:
    On the Central Administration Web site, in the Application Management section, click
    Manage service applications.
    Click the Web Analytics Service Application row to select it and in the
    Operations group of the ribbon click Properties.
    In the dialog box, in the Data Retention Period section, set the data retention period, which can range from 1 month to 25 months.
    See
    https://technet.microsoft.com/en-us/library/ee620541.aspx#section1 for more info

  • I converted aif files to mp3 files in I tunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive.  How do I get the iTunes to only copy the smaller file?

    I converted aif files to mp3 files in iTunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive.  How do I get the iTunes to only copy the smaller file?

    My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
    Smart playlists cannot be edited manually, only by changing the rules.  You can use them as the basis for another smart playlist though.
    There is added overhead to using smart playlists, so don't go overboard.

Maybe you are looking for