JPEG Export - Custom Area

Hi All,
I have Indesign cover file where i need to export front cover only as JPEG. As for as manual export option concerned, indesign doesn't have any custom area marking. I will this be possible using javascript?
Please advise.
Regards,
Selvakumar

Hi Selva,
Javascript can be done for Exporting the selection content as JPEG.
It can be handled manually by using the default option (Selection) while exporting as JPEG (as shown in the below screenshot).
Sorry if I understood your requirement wrongly. Please elabrate your requirement if I am wrong.
Please revert for further assistance if any.
Regards
MANi

Similar Messages

Lightroom JPEG export VS Photoshop Image Processor

Hey guys:
Long time photoshop and lightroom user (long time user of all things Adobe). First post here in the forums. I did a search for my question but I think it was too specific, so it returned zero results.
My question is about Lightroom's JPEG export vs Photoshops Image Processor. When I export a RAW file to JPEG from Lightroom, the file size is freaking huge. The JPEG is as big as my original RAW file (~25mb). Settings are set to default - 100 quality. Everything else remains untouched.
However, when I use Photoshop's image processor (I launch it through Bridge, easier that way for me) and process the RAW images that way, my JPEGs are roughly 5-10mb in size. Settings in Image Processor are quality 10 and thats it. No actions being run or anything.
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
Thanks in advance.
-The Doctor

DrMilesBennell wrote:
Can anyone shed some light as to why Lightroom exports JPEGs that are roughly 2-4 times the size of Photoshop's JPEGs? My initial thoughts are that the 100 quality setting in Lightroom is more like Photoshop's quality 12 (that always makes me think of Spinal Tap - "Why don't you just make ten louder and make ten be the top number and make that a little louder?" "These go to eleven.") Ideally, exporting out of Lightroom would be much easier for my workflow.
You are correct: LR Quality 100 = PS Quality 12
Despite LR having 101 Quality settings (0 to 100) it actually only has 12 Quality settings the same as PS 'Baseline Standard':
JPEG Quality Setting Comparison
PS
LR
LR Range
Typical Reduction
0
0
0-7%
11%
1
10
8-15%
23%
2
20
16-23%
14%
3
30
24-30%
14%
4
35
31-38%
16%
5
40
39-46%
24%
6
50
47-53%
4%
7
55
54-61%
27%
8
65
62-69%
25%
9
70
70-76%
31%
10
80
77-84%
35%
11
90
85-92%
41%
12
100
93-100%
I keep a small copy of the above table taped to my monitor. I chose the numbers under the 'LR' column for the 12 steps (not AA's) to make it easier to remember. In actuality ANY number in the LR Range column will produce the same results for each step.
Under the 'Typical Reduction' column notice the small amount of reduction for PS 6 (LR 47-53%) Quality setting. If interested why AND why you probably shouldn't use PS 7 (LR 54-61%) Quality setting see this post:
http://forums.adobe.com/message/5641903#5641903

JPEG Export Looks Saturated in Internet Explorer

I see this question in many forums and online but without a solution.
JPEG exports (sRBG) look overly saturated when viewed in Internet Explorer browser, including when uploading/viewing in Facebook, etc, etc. In other words, the colors looks different between Lightroom and Internet Explorer. (Colors looks the same between Lightroom and Photoshop though.)
As point of reference, when you download a sample JPEG image from Canon EOS's website (used to show sample images from their cameras) you see that those images also use sRGB profile. They also look exactly the same no matter how you view them (Lightroom, Photoshop, Internet Explorer, Safari, etc.).
What is Lightroom doing to photos upon export to JPEG and you need Lightroom or Photoshop to see the same colors?
I saw some talk about it had to do with Lightroom presets and that you had to zero those out? Any ideas from Windows users?

Have you got Firefox or Safari on your machine? In which case, how do the images look in either of those browsers? Or, if you're using Windows 7, how do the images look in Windows photo viewer?
Also, can you say what monitor you are using please?
I think it might be a colour management issue. Internet Explorer is not colour managed (not even IE9), Lightroom and Photoshop are colour managed, so is Windows 7 photo viewer (but not the XP equivalent), so are Firefox and Safari (but not Chrome). When there's a difference between how something looks in an non-colour-managed program and colour-manged programs then it's worth checking for colour management issues.
If your monitor has a wider gamut than sRGB, then you would expect IE9 and other non-managed programs to look over-saturated.

Lightroom vs jpeg export

Hi,
My images do not look the same as the way they appear in lightroom. Seems like they are loosing contrast/shadows.

Yes I am using sRGB color profile when exporting.
This is my screenshot of the image in Lightroom vs Jpeg Export on the right.

Issue with JPEG Exports

I am unable to use my exported JPEG files in other programs. I have exported my InDesign document pages as JPEGs, and they are available in a folder and open up in Preview. However, when I try to import the saved JPEGs into other programs like powerpoint, they are unavailable for selection. I am using a Mac.
I have tried using the JPEGs in multiple other programs so am thinking the issue is something to do with the export format itself.
Any ideas on how I might be exporting this wrong?

Exported Jpegs not readable by Powerpoint via finder

Indesign RGB color problems and JPEG export

How do I get a bright red or bright lime green RGB jpeg to show properly on an InDesign page? I click on New Color Swatch, Color Mode: Web and select a web safe color, yet when I draw it on the page, the colors are incredibly dark and less saturated, like it's converting to CMYK colors.
Also, when exporting to jpeg the colors are still dark and less saturated, yet if I copy and paste each page from InDesign into Photoshop, the colors are bright and saturated as intended. Doing this for each page is out of the question for my project, since I need to convert 130 similar pages into Web-bright jpegs. The export to jpeg doesn't seem to work in my favor either. So what gives?
I tried changing color profiles, too, RGB set to sRGB and Adobe RGB 1998. CMYK set to SWOP No luck. Help!

Please post this question under its own topic with a subject line that
actually relates to the question. Include details, like how you're
converting TIF to JPG, *why* you're converting TIF to JPG (TIFFs work
just fine in Word and Powerpoint), and how any of this relates to
Indesign. Include platform, ID version. Most important, tell us *in what
way* your colleagues can no longer insert your jpgs: Do they get an
error message?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Export Custom List into Excel through custom Ribbon

Hi i have a requirement, in that i need to export custom list into EXCEL through custom Ribbon. For Example in my list, i have Col1, Col2, Col3. Col3 has multiple values (allow mutiple values) and when export this into excel all values in Col3 should
come as new rows and rest of the column values should duplicate. please helpout from this requirement.
List View
Col1   Col2      Col3
v1        v2    v31,v32,v33
Excel View
Col1 Col2 Col3
v1      v2      v31
v1      v2      v32
v1      v2      v33
Nihath

Hello Nihath,
As per your description, you have to read each and every items in list with column value then only you can generate excel. There is direct way to export datatable to excel but in your case you will also need to iterate Col3 value to create new row in excel.
I would suggest to use CAML query to get all items then check Col3 value. If there are multiple value then add them as new datatable row and finally export full datatable to excel.
Here is link for CAML:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spquery.listitemcollectionposition.aspx
Export datatable to excel:
http://stackoverflow.com/questions/12533626/export-datatable-to-excel
Finally add this feature in ribbon:
http://ankurmadaan.blogspot.in/2012/10/custom-ribbon-action-for-specific-list.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

CIN Details for Export Customer

Dear Experts,
We are having export sceneraio in our company.
Everything is working fine wih configuration.
But at the time outgoing excise invoice it is showing error that customer CIN details has to be maintained.
My question is
Does the foriegn customer will have CIN details - ECC no, Excise range, etc?
Or do we have to just enter dummy no in the CIN tab for customer?

Check whether Excise invoice type is selected or not in - Outgoing excise invoice details ( calcualtor icon in J1iin).
Export customer will not have any CIN details.
Path: IMG-Logistics General - tax on goods movements -India - Business transactions - Outgoing excise invoices - Maintain default excise group & series group wrt;
Sales area + Shipping Point + Plant + Excise group + Series Group = Export ( B/ N / U)
Regards,
Reazuddin MD

JPEG exports - "optimize to file size"

just saw this tucked away in somebody's lengthy post, but i think it merits its own thread.
it would be very useful, and isnt very difficult, to implement a jpeg export option for auto-setting the quality slider based on "desired file size".
for instance, my web products need jpegs w/ a max of 800k. in PS, i have to dork around w/ the preview sliders to get this. in LR, there isnt a way. preferred for both would be UI for inputting the desired size and let the cpu do its job.
this would rock.
thanks
matt

Yes. Generally speaking, would be nice to know the exported file size in terms of MB / KB, in addition to pixel dimensions which are already there.
Gilles.

Jpeg-export - metafile error - errorcode 2 or errorcode 0

Hello,
i want to export my Report-Sheet as an jpeg from an serial analysis for every step. After the first step the jpeg-export fails with following error message: (in german) "Es befindet sich keinMetafile in der Zwischenablage. Fehlercode 2" or in english: "there are no metafile at the clipboard. error code 2" the failing command looks like this:
for i = 1 to 12
Call PICEXPORT("D:\MFriedrich\" & messname & "Kraftanzeige_" & k & "0kmh.JPG","JPEG",1,1024,,"RGB 24 YUV 444",100,"JPEG",0)
next
The files and folders do exist.
What can i do? I seems, that a temporary picture will not be create at the clipboard.
DIAdem 9.10.2345 ServicePack 2b
WinXP
Modul: Diadem-Script

Hello!
I tried by my computer and could export in a for loop the Report in a JPEG without any error.
Could you post the whole code you are doing in the loop?
So I can try do reproduce the problem
Regards
Ken

JPEG Export fails in some way

Hello guys,
we have developed a JPEG Export Plugin for InDesign server that worked fine for several years now, never having any problems. Now a strange issue occur and I need some help. When exporting an preview image of one page (containing textframes with text and tables) the preview image is correct if the dpi is smaller than 72 dpi (100% in our application). But when the dpi is equal or greater than 72 the text appears correctly on the image but the tables are missing. This problem occurs on CS4 but not on CS5 server, but there is no difference between the plugin implementation (beside the changes that were obligatory for porting the plugin to CS5). Maybe this is a known issue or someone has solution for it?
Here is the difference between the exported images (smaller than 72 dpi and greater or equal 72 dpi):

I do move some photos to OnOne or PS (for editing), then back to Aperture. In Aperture I would select-all (click) the photos I wanted to send to Sam's for printing then drag the selected items (all at the same time) onto the Sam's web site for processing/priniting. Another thought - on occassion I would have to switch-out flash-cards during shooting.
Ah there you go both pieces of the puzzle solved.
You're getting the Tiff files in Aperture from the use of the external editor. In the Aperture->Preferences->Export window is the settings for what file type to use with an external editor I'm sure your setting is Tiff.
And then by dragging the file out of Aperture rather then exporting it you are getting the Tiff.
IMPORTANT Point:
By dragging the files out of Aperture you are not really exporting them you are getting the Aperture generated preview (or in the case of the Tiff files the original). The settings in the Export window have NO effect on the image when you drag it out. In all likelihood you are not getting the size and/or resolution you think you are.
You should be exporting the versions by using the Export Versions button in the Export window. Once the versions are exported to a folder on your disk you can then drag those to the print web site. This will ensure you are getting the image size and resolution you want.
regards

Lightroom 4.4 jpeg export VERY noisy...HELP!

Hi all,
I have Googled and quite aware of the noisy jpeg output for v5 onwards.
But I'm still using 4.4 and all I found on Google is threads for v5.
Has anyone experienced this noisy jpeg export issue?
Here's a screengrab comparing the two.

If you're seeing a reduction of noise in the Export when you increase the Lum NR slider, then it's not a bug preventing the Lum NR from being applied.
Besides increasing the noise-reduction and not sharpening the remaining noise during Export, the other thing to do is use sharpen masking to prevent non-edges from being sharpened. You use the Mask slider in the sharpen section to accomplish this.
If you hold down the Alt key while moving the Mask slider you can see what areas will have sharpening applied. Make sure that it is only the edges, not the areas between where noise is the only detail or texture. The mask slider will probably be close to 100 for optimal results with a noisy image.
You should expect there to be a little grain left in the image.

Jpeg export output is 'smudgy' vs Lr develop display

Hello Gang -
I've been blaming smudged output on facebook & Flickr - but now I've seen the true culprit !
My Jpeg export output is quite 'smudgy' vs the Develop display - and even when I use export "Email" default it is still smudgy while the Develop module displays great detail...
what needs to be tweaked please?
much thanks ~

Hello -
Ok - interesting:
I imported a jpeg into Lr and it looks very good - long story short - Windows Photo Viewer sucks
Viewed in Paint - looks good, viewed in FastPictureViewer - looks good.
Viewed in flickr - Bad. I'm installing Chrome to see if its a firefox issue
I use firefox browser, I use sRGB as the export color space (although I see no difference among the 3 default kinds.
I canot find info as to whether WPV makes use of embedded icc profiles, and after googling and reading - I have not found info as to how I would know if I am "even including an embedded profile with the files"
Flickr and Facebook display my jpegs exactly as I see them in Windows Photo Viewer - which is different from how I see it in Lr's Develop Module - in that dark brown & blacks look smudgy with much reduced detail
Bob_Peters wrote:
Does Win7 "Window Photo Viewer" make use of embedded icc profiles?
What color space are you using for the exported JPEG files? Are you even including an embedded profile with the files?
What do Flickr and Facebook do when confronted with an image containing a color profile?
What browser are you using to view the Flickr and Facebook images?

LR2.1 jpeg export problem

i'm running LR 2.1RC and i've noticed that if i highlight a number of images to export using a preset which resizes my files and exports as a jpeg the images are occasionally exported as tifs. if this happens then the next time i export an individual image with 'export previous' or the preset, it's also exported as a tif. If i choose 'export' then click ok, it's exported as a jpeg. all quite weird/annoying ! (i'm also running the latest version of mogrify if that makes a difference)

hi. apologies for delay in responding - have been trying to find some time to do some testing
i removed and re-installed the mogrify plugin and this seemed to do the trick. i couldn't replicate with the standard export, so i assume it was just a mogrify issue

Calculating Import Duties on an Export Customs Shipment

Hello Experts -
On an Export Customs shipment, does GTS calculate the import duty for importing the material(s) into the final country of destination?
For example, a company in the U.S. ships a material to a customer located in Brazil. GTS can be configured create the export documentation & statistical values off the proforma invoice. Can GTS also calculate any import duties that may be due to import the material into Brazil?

We have very similar situation dor Aero Defence Industry , while exporting from US to Brazil , we are able to comply with US Export documents but we are not able to fulfill for Brazilian importing and shipments are getting struck resulting in penalties and delays.
If any knows about the documentation needed from Brazil side, can you please let me know.
Thanks,

JPEG Export - Custom Area

Similar Messages

Maybe you are looking for