JPEG Files in Premiere Getting Mixed Up Within a Project

JPEG files loaded into my project are getting mixed up. It's like Premiere can't tell the loaded files apart. That is, I load several JPEGs in to the project, each with a different file name, put them onto the Timeline, and, later, when I click on the file name in the Project panel, several of the different files display the same image of one of the JPEGs in the Poster Frame, the Source Frame, and in the Project Sequence. The file names remain listed in the Project panel continue to show the correct file name, but several show the same image when selected.
I assumed something happened when the files were Imported and were now confused in the project. To try to fix this, I Cleared all of the bad files off the Timeline and out of the Project panel. Changed the source file names in Windows Explorer (i.e., added an "a" to the file name) and re-Imported the files into Premiere. It seemed to work, but a little while later, some of the same files, plus some newly Imported files, all turned to the same image again. I again repeated the Clearing process for the bad files, changed the source file names once again in Windows Explorer, changed the Folder name in Explorer, and again re-Imported the files into Premiere. Again, after a while several of the files all had changed to the same image on the Timeline, the Poster Frame, and the Source Frame.
It's like the program has somehow mixed these files up and, whatever caused the mix up, remains persistent even with files that have been renamed.
This happens to approximately 20 JPEGs out of perhaps 70 JPEGs in the Project. It has not happened on any previous projects.
I can't tell if my Premiere (5.0.3) has become corrupted somehow or if this error is limited to this one Project. Is there a way I can transfer my work into a new project (I really don't want to have to start completely over).
I'm fairly desperate. Thanks!
--Dave

See this thread for a workaround:
http://forums.adobe.com/message/3684577#3684577
This bug has been fixed in Premiere Pro CS5.5.

Similar Messages

Strange Behaviour with JPEG files on Premiere Cs5 Timeline

Whew! Have not seen this problem before. Have been using Premiere since Ver 3.
I am in a project where I am dropping Jpeg images on the time line and creating a slideshow.
I am doing lots of motion with keyframes on scale., position etc .
When I render the project some images disappear and another image appears several times in their place.
Here is the link to the uncompleted video :
http://youtu.be/GA6iSXkFhK0
Notice the image of the bride and groom at front of the car keeps repeating itself, whereas other images were placed in the timeline.
Help would be appreciated. I have redone the project 4 times.

BTW, this issue should be fixed in Premiere Pro CS5.5. Users of Premiere Pro CS5 will need to use the workaround that Colin mentioned.

2 iphones sync on same computer & our texts get mixed up within AT&T network...

My husband & I both have iphones (he has the iPhone 4 & I have his old iPhone 3S) that we sync on the same itunes on the same computer. Recently, our text messages have been mixed up but only with one other of our friends. If she texts either one of us, we don't receive her texts even though they show up as "Delivered" in iMessage. If either one of us text her, it shows up with my husband's name on it & since this started happening, she has old threads of texts from him & a new thread that says it's from him but they're actually coming from my phone. sometimes my texts to her show up as my name. but the only way she can get a text to either of us is by responding to that one separate thread & it randomly will go through to my husband & he can respond. sometimes it comes to me & i can respond. but we cannot start new text threads & she cannot send any text messages to my number directly. anyone else encounter this? AT&T says it's not their system. She has never synced with our computer & she is the only friend experiencing this. any ideas?

nope. we used to be, but i've got my own now but have had my own for almost a year. this only started happening about 4 weeks ago. both of our phones were updated long before then when this last update came out, so nothing has changed that we can find to have sparked this.

Dreamweaver can't open .jpeg files...

When I try to insert a jpeg image onto a page, i get this
message: Dreamweaver can't open .jpeg files. Please choose an HTML,
XML or other compatible file. Most all of my images are jpegs and
I've never had a problem with them before. Any ideas why this is
happening now?

"DJ Website Designer" <[email protected]>
wrote in message
news:ft3bpb$pub$[email protected]..
>
quote:
Originally posted by:
rtadobe
> thanks for your responses and sorry for the confusion -
i'm not totally up
> on
> lingo. I have an image created in photo shop called
forum.jpg. And yes,
> the
> error message says "can't open .jpg files..." not "jpeg
files." I get this
> message when I try to drag the photo into place on the
page. If I try to
> do it
> using the insert function (from the insert tab) the
image will be placed
> but is
> just a gray box and in my browser comes up as a box with
a red X in it.
> I've
> been placing images on this site for a couple of years
and have never had
> this
> problem...
>
>
> When you say that DW can't "open" a .jpg - do you mean
you cannot see the
> .jpg
> you have placed (inserted) on a page you created?
>
> Does the gray box have the "broken link" symbol?
No, he said that DW gives him an error message: "Can't open
JPEG file" and
won't allow him to insert the file.
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Importing Closed Caption .scc file into Premiere Pro CS6. Closed Captioning is enabled but cannot see the Captions tab. Also get error message when importing to bin.

I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television. I have watched numbers adobe videos and have spent countless hours researching this. I am able to generate about 29 different types of Closed Caption files using MovieCaptioner- including .scc (which Adobe says they prefer). When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file. I am aware of this form: Re: How do I export closed-captioned movies from Premiere CS6?
Third- I have watched some adobe video for created the CC files within Premiere. http://tv.adobe.com/watch/learn-premiere-pro-cc/create-closed-captions-within-premiere-pro /
However, I cannot find the "Caption" menu to do so? Where is it?
Am I running into problems because I am not on the Creative Cloud? IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.

Hi Bracmanf,
bracmanf wrote:
I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television.
Sorry, you cannot do this in Premiere Pro CS6. Only QuickTime files can be exported with embedded closed captioning and this must be done in Premiere Pro CC or later. All other formats must use a sidecar file.
bracmanf wrote:
When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file.
You can only attach a closed caption file in Premiere Pro CS6, no encoding is available for closed caption files (embedded or sidecar).
bracmanf wrote:
However, I cannot find the "Caption" menu to do so? Where is it?
Caption is a tab is in the Export Settings dialog box if you want to export with closed captions. This tab is available in Premiere Pro CC and later.
bracmanf wrote:
Am I running into problems because I am not on the Creative Cloud?
In Creative Cloud, you would still have trouble encoding a MPEG 2 file with embedded captions as it is a QuickTime only feature. There might be a plug-in available, but I'm not aware of it.
bracmanf wrote:
IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.
You can download a free trial of Creative Cloud here: https://creative.adobe.com/products/creative-cloud
Thanks,
Kevin

Still images get mixed - Premiere elements 9

I make a series of say 3 or 4 still jpg images as titles for my movie. All with identical background but with different text. When I drag them to the timeline the first one persists but the others in the sequence will not show when I play them in the preview window. This does not happen if the images are completley different. Renaming the files has no effect. What is happening?

Bob,
I understand what you mean about the appearance of movie clips in the timeline, I don’t think that is the problem. With every other video editor I have used if I drag a number of still images into the timeline they will all behave like separate clips for however longer I want them and they will each show up in the timeline and in the preview window as I scrub along. At the moment instead of a mini movie of 4 still images I get a movie of the first image in the line repeated for times. The other image files are named in the timelinebut cannot be viewed in the edit and they don’t appear in the saved movie I am doing something wrong somewhere.
Geoff
.From: N9JCR
Sent: Sunday, March 04, 2012 2:49 PM
To: tangledbliss
Subject: Still images get mixed - Premiere elements 9
Re: Still images get mixed - Premiere elements 9
created by N9JCR in Premiere Elements - View the full discussion

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.

I recently upgraded to iOS 8. Looks like the pics I had in my messages are no longer appearing as pictures, rather they are appearing as JPEG files (not broken jpegs). I need to get these pics. Can't figure out how to do it. I'm on an iPhone 5C.
I've tried resetting my phone, looking for the pics in the new 'deleted' folder. I tried forwarding the jpegs to sees if they'll appear in a new message (but turnout the phone won't let me forward these pics). Apple is trying to say it's the 30 day reason, but I know that is not the problem. ALl of my pics older than 30 days were viewable. It is the upgrade that screwed this up. Help! Important pics!

Try this to learn about using keys:
http://www.apple.com/support/macbasics/
You can also use your PC mouse.
As for iPhoto, it sounds like you were trying to move files around in the library. That is a bib no-no in Aperture or iPhoto.

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

When I try to import a folder of jpeg files into iPhoto, only some are imported. I get the message "The following files could not be imported. (The file is in an unrecognized format.)" I am running iPhoto '09 ver. 8.1.2 on OSX 10.5.8. They are all RGB.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

How do i get flv files in premiere elements

how can i get the premiere elements to use flv. files?

verdanexi
What version of Premiere Elements are you using and on what computer operating system it is running?
In the absence of that information, the following is a generalized no can do answer.
Although files with flv file extensions can be exported from Premiere Elements, you cannot import flv files into Premiere Elements.
There used to be a time when earlier versions could use a Moyea plug-in to force Premiere Elements to accept flv files.
how to edit .flv files
Your flv are going to have to be converted into another format before import into Premiere Elements if you want to use Premiere Elements as your video editor.
http://www.pazera-software.com/products/flv-to-avi-converter/
The link is provided for informational rather than promotional reason. I have not used it, but I have seen reports that it is free and works well for flv to avi.
ATR

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

Getting metadata into jpeg files from RAW

I am transitioning to using RAW files more often. I add metadata, including GPS info, captions etc. Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in? I haven't really worked with separate JPEG+RAW before. Would it happen automatically if I stacked them? Haven't really explored that.
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files) I'm stuck.
thanks,
Rob
LR5 Mac ML

Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
Not in Lightroom. Maybe with ExifTool.
Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Exporting is a hassle? Maybe Lightroom isn't the right program for you.
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in?
Yes, you could copy and paste (which in Lightroom is called "sync metadata"), but you would have to do it pair by pair, and then save the metadata to the files, and you still wouldn't get sidecar files.
Now, if you don't want the "sorta" sidecar files, if it will work for you to have the metadata written to the JPG files themselves (not sidecar files), then you can tell Lightroom to automatically write the metadata to the JPG files. But ... see my next comment
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files) I'm stuck.
Sorry, but exporting is really the only way to make edits and other metadata available to non-Lightroom programs. If you just want the metadata but not the edited photo, then have it written to the JPG files, but you won't be able to see your edits outside of Lightroom (or PSE or ACR or PS).

JPEG Files in Premiere Getting Mixed Up Within a Project

Similar Messages

Maybe you are looking for