Jpeg formatting problems(what am i missing?)

Ok, so I have been importing photos into FCE with no problems with the exception of photos taken in the vertical. I figured out how to rotate, but when I do that the photo is blurry and it looks squeezed. How do I correct this? I am assuming it is simple, I am stumped at this point.
I do not have any photo editing software, all photos are in jpeg format.
Thanks....

Tom,
Thanks! I guess the photo wasn't rotated. It was simple...
As far as the monitor, no monitor. I am looking into getting one, but for now I am just using the laptop and the small window in FCE. Any suggestions?
I was working using preview before I imported the photo. It was viewed in the right aspect in preview, I guess it wasn't saved that way. I opened it up, re-saved it, imported it again and now all is working!
Thanks a million!
Respectfully,
Jeff

Similar Messages

Plotting Large Format PDF: What Am I Missing?

Hey folks, someone please help me with this. I cannot for the life of me get an architectural D-sized pdf (24" vertical x 36" horizontal sheet) to print in the proper orientation on my 36" wide roll-fed plotter. No matter the settings I end up with either a portrait sheet (36" edge vertical) on 36" square paper or half of a landscape sheet (36" edge horizontal) on 36" square paper.
Adobe Acrobat 9.2.0 Standard
HP DesignJet 1050C
Windows 7 Pro 64-bit
These are the various settings I've tried:
1 - what seems like the logical settings to me
sheet: landscape (36" edge horizontal)
paper orientation: landscape
auto-rotate and center: checked
preview: landscape sheet on landscape paper
result: portrait sheet on 36" square paper
http://img.photobucket.com/albums/v474/Bane_v2/Forums/Temp/PortraitSheetSquarePaper.jpg
2 - unchecked auto-rotate and center
sheet: landscape (36" edge horizontal)
paper orientation: landscape
auto-rotate and center: unchecked
preview: landscape sheet on landscape paper
result: same as 1
3 - changed paper orientation
sheet: landscape (36" edge horizontal)
paper orientation: portrait
auto-rotate and center: checked
preview: landscape sheet on landscape paper
result: same as 1
4 - changed paper orientation, unchecked auto-rotate and center
sheet: landscape (36" edge horizontal)
paper orientation: portrait
auto-rotate and center: unchecked
preview: landscape sheet on portrait paper
result: landscape sheet on 36" square paper
http://img.photobucket.com/albums/v474/Bane_v2/Forums/Temp/LandscapeSheetSquarePaper.jpg
5 - changed sheet orientation
sheet: portrait (36" edge vertical)
paper orientation: landscape
auto-rotate and center: checked
preview: portrait sheet on portrait paper
result: same as 1
6 - changed sheet orientation, unchecked auto-rotate and center
sheet: portrait (36" edge vertical)
paper orientation: landscape
auto-rotate and center: unchecked
preview: portrait sheet on landscape paper
result: same as 4
7 - changed sheet and paper orientation
sheet: portrait (36" edge vertical)
paper orientation: portrait
auto-rotate and center: checked
preview: portrait sheet on portrait paper
result:same as 1
8 - changed sheet orientation, unchecked auto-rotate and center
sheet: portrait (36" edge vertical)
paper orientation: portrait
auto-rotate and center: unchecked
preview: portrait sheet on portrait paper
result: same as 1

After sorting out my page orientation issue another large format issue cropped up: when trying to print 24" x 36" pdf drawings to the HP 1050c I'd get the following errors:
The document could not be printed
There were no pages selected to print
I'm not sure why I started getting these errors as I was able to print just fine for some time. The good news is I've figured out how to correct it:
The 1050c is an HPGL printer, but Adobe uses PostScript drivers. The solution that worked for me:
Start > Devices and Printers > remove the 1050c
Start > All Programs > Administrative Tools > Print Management > Print Servers > (local) > Drivers
right-click the 1050c drivers > Remove Driver Package...
you may have to reboot your machine before you're able to remove the drivers
Start > Devices and Printers > Add a printer
in my case it's a network printer so I entered the IP address and named the port HP 1050c PostScript
when it asks you to select the printer from the list click the Windows Update button and wait for a bit
select HP > HP DesignJet 1050c PS3 (these are the PostScript drivers)
finish the install, naming the printer HP DesignJet 1050c PostScript
Now add the printer a second time
port name: HP 1050c HPGL
Windows Update button
HP > HP DesignJet 1050c by HP (these are the HPGL drivers)
finish the install
Now you should be able to Start > Devices and Printers > remove the HP DesignJet 1050c PostScript printer, the postscript drivers will remain installed
After doing this I was able to print from AutoCAD 2010 and from Adobe Acrobat 9.3.1 without any problems.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

What is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

what is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

When you export the videos out of iPhoto be sure to select Kind = Original. Otherwise you'll just get an image file of the first frame of the video.
OT

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any idea

I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any ideas?

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Imported files from my camera, a mixture of photos and videos, the videos (mp4 format on my Canon SX60 HS) always appear at the start of my library view. What am I missing here?

Even though I select sorting by capture time, the videos do not intersperse with the photos in chronological order. What am I missing here?
I have tried both putting them in a collection and viewing all pictures etc. to no avail.
In Windows Explorer, I have them sorted by time taken successfully. They all import into folders by date in "My Pictures", both photos and videos when I import them.
I am running Windows 7 Pro 64 bit and LR5 CC edition.
Ron.

LR's handling of video metadata (e.g. capture time) is incomplete and buggy. Please add your opinion and vote to these threads in the official Adobe feedback forum:
Lightroom: Still inconsistent capture date/time for videos
Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

Group X-Fade Problem - Grouped tracks apply different crossfade lengths when dragged in place? (What am I missing here?)

Super Friends/Fiends,
In Logic Pro X (and 9) I am hitting a wall editing a chamber string session I just tracked.
When I have multiple regions selected with either rubber-banding or phase-locked editing in groups, and I X-fade them with other regions, they apply different crossfade lengths. This does NOT occur when I individually overlap the regions. The process gets cumbersome/tedious and I feel like I am missing something here.
It is consistently applying larger to smaller crossfade lengths from top to bottom of the selected region overlaps.
What am I missing? Thanks for the help!

Same here, I'm seeing it with a LP9 project that I opened in LPX. I can't edit this way, it's driving me crazy. I also tried selecting all the regions and setting the numerical value for the fade time in the inspector, but that gives even more silly values.
Also, zooming in on the waveform looks very blocky compared to LP9.
I hope this is some setting I'm overlooking, otherwise I'll have to go back to LP9 for editing audio.
Ben

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Is there a practical size limit on JPEG format image files?

I have noticed when working with Photoshop v7.0 on Windows XP that, when creating a JPEG format image file from a very large scanned image (more than 800 Mb, maybe), the .jpg file will usually be saved on disk at any of the possible compression ratios available, without any reported error, yet when the saved file is re-opened, an error is reported - something along the lines of "missing or corrupted end of file marker" - and the image cannot be loaded.
If before saving the original image is substantially reduced in size, e.g. by reducing the resolution of the image, a viable JPEG format file can be created, which will subsequently load successfully, though technically with data loss.
This appears to happen only with JPEG format files - PDF format files can be saved from the original image at similar JPEG compression ratios, without error on reloading.
I do not know if this also occurs with any other Photoshop versions. I am working with Adobe Photoshop v7.0 on Windows XP, although we are preparing to upgrade to CS (which version I don't know) in the near future, for different reasons to those which are detailed above.
Does anyone know if there is a technical explanation for this behaviour? Is there a file size limit for writing viable JPEG files (which Photoshop does not report as an error when exceeded)?
Thanks

Chris Cox wrote:
Where did you get the idea that we weren't doing something about it?
that's what I gathered from "JPEG cannot [...] in Photoshop (code difficult to replace)".
But if you say this is in the works right now, that's good news indeed.
Chris Cox wrote:
And where did you get the idea that posts get deleted? (other than SPAM)
Are you sure you're reading the same forum as the rest of us?
That's what happened:
The content you posted below was reported for abuse and removed by our
moderators:
Subject: Re: Is there a practical size limit on JPEG format image files?
Posted: 4/29/11 9:11 AM
Anyway, you gave an honest answer on this technical issue, Chris, and that's what counts.

Convert Web Page to PDF formatting problem - 1st line of each paragraph outdented

Hi Folks,
I get a formatting problem when I convert any web page to PDF using the 'Convert Web Page to PDF' option - the 1st line of each paragraph is outdented.
eg if i convert http://helpx.adobe.com/acrobat/using/whats-new-acrobat-xi.html I get this:
I get the same problem using IE 9, Chrome (latest) or Firefox 30.0. I don't get it converting a Word doc to PDF.
I'm using Adobe Acrobat XI Pro on a PC running Windows 7.
Is there a simple setting somewhere I am missing?
Any help much appreciated!

Are you using "Adobe PDF" or "PDF or XPS?" I sounds like "Adobe PDF," but trying to be sure. Have you updated your Acrobat to the latest version? If not, try that.

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format. What is wrong? Same camera as before.

I can no longer import pictures to my ibook (OSX version 10.6.8) using iphoto 09 version 8.1.2 and now get message that file is in an unrecognizable format. What is wrong? Same camera as before.

Julesvernet
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

Call your phone carrier - that's a problem for them to resolve.

Jpeg formatting problems(what am i missing?)

Similar Messages

Maybe you are looking for