Jpeg sequence issues

I'm creating a microsite and want to achieve the same effect that is in the Adidas Nitrocharge (www.nitrochargeyourgame.com) microsite. The one effect in particular is when you click on "The Boot' and the guy walks up and then you can control the movement by clicking and dragging on the custom scrollbar. I am using a jpeg sequence in Edge and it has been glitchy. Is there any better way to achive this look? And how to you make a custom scrollbar? Help!

Hi there Liz,
Here are a few examples of how to make custom scrollbars:
http://forums.adobe.com/message/5455360#5455360
http://forums.adobe.com/message/5033886
http://forums.adobe.com/thread/1144336?start=0&tstart=0
What do you mean the jpeg sequence is glitchy? Is it not playing smoothly? You may want to increase the frequency (effectively frame rate), of your sequence. Also, if the images are very large, there may be processor lag in turning images on/off.

Similar Messages

Jpeg sequence trouble shoot, one frame altered

I am trying to create stop motion animation in After Effects CS6. I batch processed all of my photos in Photoshop and I am using RGB color space. One frame in my stop motion is altered when I import the jpeg sequence into After Effects. This frame appears to be an inch or two higher than all other images in my compositon panel and a white band is now at the bottom. It appears as if the entire picture is shifted upwards.
I reimported everything and the problem persists. This frame appears to be the correct dimensions, etc after it has been batch processed and before I import into After Effects.
Please assist! I appreciate any suggestions you may have to offer.

The frame shows up in its entirety in other image viewers. Do you have any further suggestions regarding what to specifically look for in metadata or color profile issues? The workspace is RGB and I am not sure what else to check for....
Thank you for all of your help!

Media Encoder CC won't import a JPEG sequence to the queue

I am running Media Encoder CC 7.2.2.29 (64-bit) on OSX 10.9.4.
I have a JPEG sequence GoPro timelapse image sequence that I want to encode into a video clip. All files have a .jpg extension. They are 4000x3000 and have an RGB color space. The Color profile is SRGB IEC61966-21. All images are 3.9MB.
According to the ME help I should do the following.
To add an image sequence, choose File > Add Source. In the Open dialog box, choose the first file of the image sequence. Enable the Sequence Import checkbox for your file type, and then click the Open button.
I follow the instructions and select the first image in the sequence. The "JPEG File Sequence" checkbox is active and I check it and click the Open button. The dialog disappears and nothing happens. There are no warnings.
How does one get JPEG sequences to import to the queue?
Please advise.
-Travis

Yes, import into premiere work fine. The nice part about using AME directly is you don't have to have to create a project or use an old one every time you want to crunch a timelapse. Also, AME has this nice feature where it will autoname the output file IMG[FirstStill]-[LastStill] (ie IMG[GP001234-GP001297]). This was helpful because GoPros change the first number in the sequence every time you stop and start time lapse.

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Oracle 11g : Sequence Issues after impdp

Hi All,
We are migrating from Oracle 10g to Oracle 11g. As part of this, we take a expdp from 10g and successfully did an import using impdp on to Oracle 11g database.
But the problem is, there were few Primary key violations which occurred and all of them relate to sequences.
The Maximum data in the tables and the last number in the sequences differed which caused the issue.
Upon investigation and browsing the Web, http://www.nerdliness.com/article/2009/03/18/my-oracle-sequencedatapump-shenanigans ; I understood it could be because of the export taken while the application is online and writing to the database.
I reset all the failing sequences manually and it is fine now.
My questions now are
*1) Can we ascertain that the export taken when the source database is offline would eliminate the sequences issue.*
2) As this is being done in Production, I would like to make few checks to ensure that the sequences are properly imported. ---
Again reading few websites and oracle Forums, i found the below sql's..
select table_name, column_name, utl_raw.cast_to_number(high_value) as highval
from dba_Tab_columns
where owner = 'PRODUCTION_OWNER'
AND DATA_TYPE= 'NUMBER'
AND (OWNER, TABLE_NAME, COLUMN_NAME) IN
(SELECT CC.OWNER, CC.TABLE_NAME, CC.COLUMN_NAME
FROM DBA_CONS_COLUMNS CC
JOIN DBA_CONSTRAINTS C
ON CC.OWNER=C.OWNER
AND CC.CONSTRAINT_NAME=C.CONSTRAINT_NAME
WHERE C.CONSTRAINT_TYPE ='P'
ORDER BY 3;
SELECT SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, LAST_NUMBER
FROM DBA_SEQUENCES
WHERE SEQUENCE_OWNER = 'PRODUCTION_OWNER'
ORDER BY LAST_NUMBER
If I relate the last_number with the highval and if they are same, does that mean the sequences are imported properly.
Note: We have sequence caching done and we are on RAC.
Edited by: ramakrishnavydyula on Jan 30, 2013 9:36 AM

We are migrating from Oracle 10g to Oracle 11g. As part of this, we take a expdp from 10g and successfully did an import using impdp on to Oracle 11g database.
But the problem is, there were few Primary key violations which occurred and all of them relate to sequences.
The Maximum data in the tables and the last number in the sequences differed which caused the issue.
it could be because of the export taken while the application is online and writing to the database.I don't know what's your database's size , and what's acceptable downtime for you, but I could never propose such a migration tecnique to any of my customers, due to excessive downtime when databases are quite large.
It's quite obvious that you get such errors when the export is done while people are working, unless you use FLASHBACK_SCN or FLASHBACK_TIME parameter while exporting. But in this case, assuming you don't get errors (e.g. ORA-01555), you'll probably lose a lot ot transactions.
Assuming your 10g database is running in archivelog mode (which should be the default in production DBs) did you think of using RMAN to do the migration ?

How to import JPEG sequence into Photoshop CS5.1 - Windows 7 64x?

Specs:
Windows 7 Home Premium 64x
Adobe Photoshop CS5.1
I have been doing animated banners by using Ae and exporting my animation as JPEG sequences in order to import it to Photoshop and export it as GIF. However, I just upgraded to CS5.5 and I cannot find the "image sequence" checkbox when opening a file.
I would normally see this check box when going to File > Open .. select one file and the open window would have this check box at the botton, which I no longer see.
I could import all my (130) JPEG sequence images and then use the animation window but that would be soooo stressing and tedious.
Any help will be appreciate it!

If you have a series of jpeg images use menu File>Scripts>Load Files into Stack. This will load all the jpeg image files into a single document as layers. Use the Animation Palette fly-out memu and click on make frams from layers.

Wacky image sequence issue - flickers

Hi guys,
I've created a simple 2 image sequence I wanted to play through at the top of my DPS document - but when I preview the article (on both desktop, iphone and ipad) the image sequence fails..
I took a quick screencap to show what Im going.
DPS Image Sequence issue - YouTube
Any advice?

For a two-image effect, I would use a slideshow instead of an image sequence. Not sure what's causing the flicker.

Exported Flash JPEG sequence out of sync in Premiere Pro

What I have:
CS6 version of Flash Pro and Premiere Pro.
Uncompressed audio in .wav format at 44100hz
What I am doing:
Importing the .wav file to stage in flash pro.
Creating animations based on the audio at 24fps
Exporting the animation as JPEG sequence.
Importing the JPEG sequence to Premiere Pro.
Importing the .wav file to library in Premiere Pro.
Exporting the the animation with audio as .mp4
Result:
Audio out of sync.
NOTE: This problem can also be seen when importing the JPEG sequence and audio in Premiere Pro.

Here's what I've discovered while working with JPEG sequences and audio files:
Since you are dealing with individual still frames within the JPEG sequence, it will always import at a full 30fps, rather than 29.97 or 23.976 (depending on the project). The audio file, most likely, will show up as either 29.97 or 23.976. Let's say, for this example, we are working in a 29.97 project. If you pair the JPEG sequence with your audio, you will have a .03 frame difference, per second (30fps vs. 29.97fps).
You will need to conform the JPEG sequence to match the frame rate of your audio. In After Effects, while the JPEG sequence is still in the Project Panel, right click and then select "Interpret Footage." Select "Main." In this dialog box, change the frame rate from 30 to 29.97 (or 23.976). Choose either Drop Frame or Non-Drop, depending on your project.
After clicking "OK," you can take that JPEG sequence and drop it into a composition with your audio. You should be good to go.

Debug Media Encoder after a crash. Can't render jpeg sequence.

I have several time lapse vidoes I am working on. The files provided are jpeg sequences. I've been trying to make a mov file out of jpeg (70k-ish) sequences. It worked with one batch but not with the others. I have no idea why. Media Encoder seems to be reaching the same spot and it crashes. The crash window makes no sense to me. How do I troubleshoot what is going wrong so I can get these.
Hardware
2 x 2.4 GHz Quad-Core Intel Xeon
16 GB RAM
ATI Radeon HD 5870
Software
Mac OS X 10.6.8
Adobe Master Suite
Adobe Media Encoder CS5.5
The jpegs are 640x480.

Hey Todd,
I had two active projects that suddenly could not render/export. One is quite massive and has RG Colorista quite a bit throughout it, however I could not export a timeline without any plugins on it. The other project is also clean of plugins. Then I started a new project and it went out just fine until I put the RG plugin on it. But here is my newest glitch. I just made a change to an old show and all of my titles done in Title Tool were resized and positioned. Blown up and shifted to the right. If I take the same file and put it on my laptop which still has not got 10.9.3, they are just fine. Scaled properly and centered between title safe. But now on 10.9.3 they are blown up and going off the screen.

Errors in random frames of JPEG sequence

I'm experimenting with the time lapse technique for school Photography class, using Ae CC on Windows 8.1 to string the 120 JPEGS together to create a 4 second experiment of light trails of cars.
However in these 120 frames, there are two that come up in Ae and the render as SMPTE bars. I have no idea how to overcome this other than painstakingly finding the right frame number and manually importing the jpeg.
The pics were originally CR2's, I converted them to jpegs after I had the same issues with the Raw files.
The only thing I could think of is that when taking the pictures, I took the specific ones that are failing in Ae too fast after my previous one and my camera couldn't process them properly (as its old and slow)- however Windows Explorer and Lightroom 5 see them perfectly fine...
Heres the video on you tube, rendered really low quality for size
YouTube

So I found the missing frame in Ae _MG_7732.CR2 and when I went to find it in Exporer, it wasnt there, so I dont know where it went, and how AE thinks its threre, I think the two frames were pictures I took in camera, deleted hence missing out in the sequence, as the pictures go from _MG_7731.CR2 to _MG_7733.CR2, meaning that AE is just confused about where the pictures have gone (as all the pics are in alphabetical order)
Ill try renaming all the pics in Lightroom so all the pics are in sync
Gyazo - 50849d8042bc8c7fc13b02765c2c7445.png
Gyazo - fa945315bd10fe4c4a52ce7b5c436eb3.png

Navigation very slow and not able to enter in memory a sequence issue

Hello,
we have a big problem with oracle forms performance since we deployed our
application to the web. all our customers are not confortable with this new
environment because the sytem are very slow and working it's very difficult.
our application is very slow in point of when the user use very quickly the key
functions it doens't work.
I explain :
for example, we have a button &Verifier (alt+v : acces key to this button) and
when clicking to button we have a dialox box that contains 2 buttons:
Oui(alt+O:access key) and Non(alt+N:access key) and if we click Oui(alt+O) it
popup as an information box and we must click Ok(alt+O: access key).
then if we click quickly alt+v after alt+o after alt+o it doens't work and it
wait to click againt alt+o.(like the system doesn't follow or has not yet enter all the sequence in the memory)
before in client/server it work's fine.
it's like our application in the web it's not able to entered in memory a
serial of access key.
please can you help me the problem is always occuring in the production
environment.
our environment:
- oracle jiniator :1.3.1.22
OAS 10G (9041)
DATABASE 9206
- the complete version of forms : 9.0.4.0.19
- we have 23 USERS.
any help are welcome, the problem are urgent.
thank you.

Hi
Lets analyse and hope to narrow down your issue
We have used the Pick and Pack Manager to release goods from Sales Order through to Invoice. The functionality offered is good,
> Slow performance could be triggered by multile issue , so lets wait
> Do you know PICKand PACK manager is only for status ,but it actually doesn't affect inventory level .
but in practise the system is so slow it is taking 2 to 3 times longer than copying to a Sales Invoice.
> You need to do delivery first and transfer the delivery into invoice .
Is there any way of cutting out part of the process to speed things up? What we really need is to be able to create an invoice(s) straight from the Pick and Pack manager.
>> It basically depends upon your business process . but by software , You can bypass Pick and PACK Manager process. You can transfer your sales order into A/R invoice and while posting A/R invoice , inventory will be reduced .
Hope this help to narrow down your issue
thank you
Bishal

Nested Sequence issue: keyframe scale setting changes after rendering?

Hi,
I'm using PremierePro CS5.5, and have been having this same issue since CS4. After nesting a group of clips, I make the timeline effects entries to animate the nested sequence. For this example, let's say I start at 00.00 with the scale set at 150%, and end the sequence with the scale set to 300%. Just zooming in. Looks OK, so I hit return and render the nested sequence. It plays back, all is good, but after it stops the 00.00 setting magically changes to 100% or some other percentage. I've tried everything I can think of, from selecting Hold or Linear for the keyframe, to deleting all the keyframes and redoing the settings. It only happens with nested sequences and it seems to only be the scale setting that goes flukey. Anybody else have this happen and could you tell me what I am doing wrong?
Thanks,
Christy

Thanks for checking it out Jim. It doesnt happen every time, you know how that goes... just often enough to drive me batty. I'm doing animated whiteboard videos. Lots of short bits of video layered with graphics and stills, some effects, then all that is nested and sometimes the rate compressed. Then I zoom in a bit and that seems to be the last straw. Maybe I am just doing too much? It's a simple, uncomplicated look to the finished piece, but it takes a lot of cuts and tweaks to get it that way.

Drag and Drop Image Sequence Issue

Hello,
Im having trouble dragging and dropping an image sequence folder. The folder drags in perfectly and the window even highlights but nothing happens. However when I go through FILE and IMPORT i do have success bringing in the image sequence as comp.

> Is there anyplace to go to find known bugs with the program incase something like this arises in the future?
We often post solutions to known issues on the Technical Support part of our site.
I'll go ahead and write up a quick list of known issues in After Effects CC (12.2) with workarounds.
Regarding the update that we thought we'd be releasing this week: We ran into a problem in which one of our fixes broke something else (which is why we do the testing), and we're having to redo some things. My current estimate is that the update will not come out this week but will come out some time within the next couple of weeks. Sorry for the delay, but we need to get this right more than we need to get it out fast.
I'll post a summary of workarounds tomorrow to bridge the time between now and when the update is released.

QT Motion Jpeg gamma issue

I jumped from using CS3 to CS5 so this may have popped up in CS4 and everyone else figured it out already.
I used to deliver files in QT Motion JPEG codec. However in CS5 when I output in that format everything looks washed out as though there is a gamma issue when playing back in QuickTime, or other editing software. If I open that QT file back up in After Effects it looks fine.
I'm not using color management, just an out-of-the-box installation at the moment.
I switched to delivering in QT Animation codec which solved the problem but the filesize was overkill for this particular project.
Any help is appreciated!

This did fix the problem asuming I want to bring the footage back into after effects. When I do that everything matches.
But...
If I open the original source footage up with QuickTime, or in a 3rd party editing application and compare it to the AE render made with "Match Legacy After Effects QuickTime Gamma Adjustments" and also compare to a render made without that setting turned on I get very different results
The original source looks good, but both renders look equally incorrect (washed out like a gamma problem)
Is After Effects adding a pripriatary tag to the output file that only AE is resepecting when it's loaded back in?
Thanks!

Goa line item sequencing issue

Hello experts,
I am facing a problem in GOA line item sequencing in SRM 4.0.
I create a GOA with lets say 3 line items and distribute it successfully to the backend.
Now if I want to add extra items using option 'Add Calaog items' from R/3 material and service catalog. The new items that I select and tranfer to SRM are created under line item 53 54 and so on..
Why is this gap in the line items and why I can't I get the new line items in proper sequence?
Please help.
Thanks and regards,
CM

Hello CM,
Have you received any repsonse on this? we are facing same issue.

Jpeg sequence issues

Similar Messages

Maybe you are looking for