Jpegs blurry after bringing back project

hello again
well, i brought my entire film back into fce, fixed the sync problem, but now i have a new problem
i have hundreds of still images on different layers, and since i brought the project back together in the timeline, they are now blurry, and the motion/effects i had put on them are gone. I did save the render files, but some are missing. Also, the render files were on a usb back up hd, which i then moved to my lacie firewire for working on this new edit.
Any suggestions as to why or what, or am i screwed and need to re-import all the stills and re-do the motion and effects??
thx
jim

ah I see, well the freeze frame is just taking one field of your material (half the resolution as its interlaced not progressive) and inventing the other half to make up the rest of the information so I'm not surprised its looking blurry on output, the reason you're not seeing it before on your screen is that you never see full res on the canvas until you output unless you use a third party output device like Matrox or Aja.
I don't know if there are any tricks to sharpen this up (other than sharpen). I guess you could try de-interlacing the rest of the footage first? but stills out of dv res material are never going to be crystal clear.
good luck with it
Andy

Similar Messages

Why are my pics blurry after iCloud back up?

I got my phone replaced at backed up at the apple store. After the back up I noticed my pics were blurry and I was not able to play the videos I had saved on my phone. Is there a way to fix this?

Without Noise Reduction
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/ada69abb1c189c28f74 f160f98904d3e.jpg
WIth Noise Reduction
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%202/b720709c4c09fa7a7a5 f7657677fcb4e.jpg

How to bring back project to iMovie project window?

I created a project and want to edit more later days. Meanwhile I moved the project file to another hard drive to make more space on the original hard drive.
When I open iMovoe the title of file is showing, but no content. How can I bring the project back to iMovie project window?

First, move the Project back to the Movies/iMovie Projects folder on your Mac. In other words, move it back where it was to begin with.
You should now see it in iMovie and be able to edit it, unless the Event folders were moved as well. If they were moved, move them back to Movies/iMovie Events.
Now, you can move them back to the external drive and have them still work, but you need to do this from within iMovie.
Your external drive must be formatted as Mac OS Extended (journaled). FAT 32 or NTFS drives will not work.
In iMovie, click VIEW/EVENTS BY DISK. Your external drive should show up in the Project Library and in the Event Library in iMovie.
To move the Project back to the external drive, hold down the Command key while dragging the icon for the project to the icon for the external drive in the Project Library.
If you want to move the Events as well, you can right click on the Project (which is now on the external drive and select Consolidate Media...

Bring back an expired project

bring back an expired project in Dreamweaver

Can you be a little more clear about what you mean by an "expired project"?
Are you talking about published content where the end user can no longer play the content because the expiry date set by the author has been exceeded? If so, then you would need to open the original Captivate project file and republish with a new expiry date (or remove the expiry date restriction altogether).
Is this what you mean?

HT1414 RESETTING RESTRICTIONS PASSCODE - Even after restoring a phone, you cannot bring back your data from the icloud because it brings back the restrictions passcode you cannot remember and used restore to begin with

RESETTING THE RESTRICTIONS PASSCODE - Even after restoring the iphone and bringing back the data from icloud you cannot reset your restrictions passcode as it is stored in the icloud backup.

Hello risenhauer,
Thanks for using Apple Support Communities.
To reset your Apple ID password without knowing your security questions or have access to the email account, you will need to contact Apple Account Security in your country. Links to contact can be found in the article below.
Apple ID: Contacting Apple for help with Apple ID account security
Take care,
Alex H.

Jpegs look blurry after crop at fit to screen but are fine at 50%... Why?

I recently upgraded to CS4 and have system 10.6.2. Jpegs appear blurry after cropping at fit to screen but are fine at 16%, 50% or 100%... My CS2 version never did this. Anyone know how to fix this bug?
Thanks

Your resolution (in the pic) is likely set to 72PPI. In smaller JPGs when they are enlarged to full screen, they will appear pixelated or blurry.
Before cropping, try setting the PPI to 300.
I had to do this when making PNGs for conversion to icons, because they would blur when converted. I set almost everything I do to 300PPI.

I want to restore my iPhone.if I create a back up before restoring so will restoring from back up bring back my contacts after restoring.urgent help please

I want to restore my iPhone.if I create a back up before restoring so will restoring from back up bring back my contacts after restoring.urgent help please

Happy for you!

OSX Lion jpeg 'preview' images are blurry after altering them

When i edit a photograph in photoshop (cs3/cs4 etc, it doesnt matter which version) the preview of that image goes blurry after its saved. The image is the full res still and hasnt lost any quality but when i have the icons that are of a large size they appear really blurry and 'low-res'
I know its a small gripe but it makes things difficult as a photographer when im trying to organise images that perhaps look similar or i want to see as a whole set.

Hello, sorry, I don't know the cure for this, but as a photographer you might have a look at Tr-Catalog, where you can choose the size thumbnail/icon/detail...
http://www.tri-edre.com/english/tricatalog.html

How can I reinstate/bring back the play trait after blocking it?

I'm using version 1.0 of OSMF.
I block a bunch of traits while pre-loading another video:
traitsToBlock=new Vector.<String>();
traitsToBlock.push(MediaTraitType.LOAD);
traitsToBlock.push(MediaTraitType.PLAY);
traitsToBlock.push(MediaTraitType.SEEK);
super.blockedTraits=traitsToBlock;
When the other video loads I try to bring back the full set of traits with:
blockedTraits=new Vector.<String>();
and I see the following - because a new video has been loaded
added trait audio
added trait buffer
added trait time
added trait displayObject
But I never see the playTrait.
How can I reinstate/bring back the play trait?
regards

Reasons why you might not see the PlayTrait being re-added include:
- your ProxyElement previously called addTrait with a PlayTrait of its own
- the proxiedElement doesn't have a PlayTrait (i.e. it's not playable media)
If neither case applies, please post a complete, small, runnable sample with source that demonstrates the problem.

Now that I have my .M2T file, how do I bring back to PE7 and burn BluRay Disc?

I had an earlier thread regarding encoding and locking up at 97%. Since then I rendered the project out to viewing on a PC or creating a DVD. Now that I'm at that point I can't figure out how to bring back to PE7 and burn to BluRay. Any thoughts?

Not quite sure I understand. All you need to do is re-import the file using Get Media> From Files and folders. Then place the clip on the timeline, add disc menu markers and then Share>To Disc and select the Bluray option, after having added the menu.

Is there a way to bring back the "Open a New Tab" option via right-clicking on the Tab?

I just upgraded to latest version of Firefox (6.0). Yesterday it informed me that an upgrade to Firefox 5.(something) was available and asked if I wanted to upgrade. I went for it. However, I hadn't used it since then till today. Now when I opened it today it asked me if I wanted to upgrade to version 6.0. Without hesitation, I went for it too.
While this version looks nice, it feels a bit odd to use it. Previously whenever I wanted to open a new Tab, I right-clicked on any of the Tabs (active tab or any other Tab) and after right-clicking, it had the option to '''''Open a New Tab''''' along with few other options. Now there's no such option. There's the + button to open a new tab, but what if I want to open a link in a new tab by right-clicking on it? Similarly the option to Open in New Window is also missing.
Is there a way to bring back those previous Tab options/settings? If yes, how?
P.S. In my bookmark toolbar, when I click on a bookmark icon, it has the same options/settings as it previously had in the last version I used (last version I used was 3.something; while I'd upgraded to version 5.something I hadn't used it except for opening the browser when it asked me to upgrade to version 6.0). Options on right clicking the bookmark icon are:
Open
Open in a New Tab
Open in a New Window
New Bookmark...
New Folder...
New Separator
Cut
Copy
Paste
Delete
Properties
I'd also like to mention here that I know of the shortcut keys; so please don't waste your time by trying to help me that way. Thanks.

No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
You can drag a link on that new tab button to open that link in a new tab.<br />
You can also drag the new tab button on another toolbar if you would like that better.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Bring Back the Apple MB869LL/A (A1242) Wired Compact USB Keyboard

I know Wireless and Bluetooth are great technologies! I know Apple makes it relatively easy to change batteries in their devices (magic mice and keyboards)!
However, I am running a few elementary school computer labs where we have many iMac computers and limited space.
One of my major obstacles from keeping these computers reliably operational is keeping keyboards alive with fresh batteries (We have wired mice). Also, since table space is limited, the standard FULL SIZE keyboards (with the numerical 10-key) takes space away from the mouse. A 10-key at this elementary school age level is really unnecessary.
It would be ideal if Apple could bring back their older version of the Aluminum Keyboard that was compact AND USB wired! The old model number was MB869LL/A (A1242).
These options are all that is currently available and neither is ideal:
FULL SIZED Wired Keyboard (that is too wide and the 10-key is unncessary): Wired Aluminum Keyboard MB110LL/B USB with Numeric Keypad
COMPACT Wireless Keyboard (that changing the batteries is too time consuming when you have 100's of computers in a lab to deal with):
Wireless Aluminum Keyboard A1314 Bluetooth Wireless Keyboard, MC184LL/B
Looking for a compact, non-10-key, WIRED, USB, Apple compatible keyboard (that has brightness and volume controls built-in).
Anyone else support this efffort, please chime in (or offer alternate solutions or compatible hardware).
Thanks,
Elementary School Challenged!

"Looking for a compact, non-10-key, WIRED, USB, Apple compatible keyboard (that has brightness and volume controls built-in)."
Depending on your budget, you can find just about anything you want if you check the internet for computer peripherals. The biggest problem with the keyboard that you want would be its high price tag and finding a large (new-in-box) supply of them. I'm never surprised at the availability of keyboards that were never used with the computers that they shipped with. After Apple discontinued the ADB extended keyboards, I was still able to find new ones for my older fleet of beige G3s. As a less expensive alternative - but one that excludes your preference for brightness and volume controls - you may wish to consider a reasonably-priced, USB-wired keyboard for PCs, like the compact one shown at this eBay auction. A PC keyboard will work with a Mac, except for any programmable function/media keys that are part of the Windows software installed with the keyboard. One distinction between an Apple and a PC keyboard is the placement/juxtaposition of the two keys on either side of the space bar: The Windows logo key and the Alt key. When used with a Mac, the Windows key becomes the Apple Command key and the Alt key is the Option/Alt key. For your use, perhaps you could place a permanent sticker with the Apple "Command" symbol on the Windows key. In an elementary school lab, the stickers might be peeled off as soon as you've replaced them - which would be a nuisance.

Is there a way to bring back the actual tab "bar"?

So in switching from FF3.6 to 5.0 I have noticed that the actual "bar" that holds the tabs is gone.
Observe:
[http://i.imgur.com/eU7lo.jpg http://i.imgur.com/eU7lo.jpg]
It's visually slightly annoying to not have a distinct separator between the tab area and the button toolbar, but that is something I can live with.
However I can NOT live with the extremely annoying functionality drawback that comes as a result of this. In 3.X and before you could right click anywhere in the tab bar and it would bring up the tab management menu. Now you can't bring up the menu from empty space because it treats that space as part of the rest of the UI and gives you a different menu, forcing you to mouse all the way over to a tab to accomplish the same end.
So my question is, does anyone know of a way, or an addon, that can bring back the actual tab bar? I find all of these UI changes to be nothing short of infuriating. I swear, Mozilla, Facebook, Pandora, Google, and Microsoft must all be in cahoots with each other because they're all introducing horrible UI designs at the same time.

Well I guess that's kind of cool that you can add buttons in the bar as well, but I honestly don't have a use for that and I think it would get in the way more often than not in most scenarios I can think of (there's a reason buttons were segregated from the tab bar and it wasn't tech limitations). The previous functionality is much more convienent and useful and, well, functional.
As for why FF5, well I've had the FF5 installation since before 6.0 was out, but the UI changes angered me so much that I abandoned it after about 20 minutes and went back to using my 3.6 installation; I've been letting the community stew and cook up solutions to the UI problems (status4evar for example) and like any good stew, giving it more time is better. Also a whole bunch of my addons (some of which are mission-critical to my browsing needs) were not [and a small few are still not] compatible with anything above 3.x, 4.x, or 5.x so I had to wait for those (mmm, stew). And then to top it off I figure the possibility that I'll run into upgrade problems is smaller if I go through the chain of updates rather than jumping from 3.6 straight to 7. And don't get me started on the whole rapid release schedule. :P

Bring back PDF Portfolio option to Acrobat Standard!

We are refreshing some department computers with newer models through Dell. These new computers come with Adobe Acrobat X Std on them. This works fine for most people until today. Our one department had their older XP computers replaced with new Win 7 machines and Adobe Acrobat X standard. They were dependant on a feature to right click on a bunch of PDFs and combine them. They need the portfolio option because a regular combine will overwrite values in forms because "they have the same name". This worked fine on the OLD machines with Adobe 9.5 Standard.
So on the new computers with Acrobat X Standard, this portfolio option is gone! This is needed for their job!
Now I am scrambling to deactivate and uninstall X standard from the new computers ,and deactivate and uninstall 9.5 from the old ones. Using Belarc Advisor to obtain the product key, I can reinstall it on the new computers, along with running all the umpteen patches to get 9.0 back up to the latest version. Not only that but the right click context menu is gone, so I had to research that and find the command to get it back -> regsvr32 "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat Elements\ContextMenu64.dll"
After doing some research it seems you have to spend extra money on a X or XI "professional" version, just to get a feature that was included in 9 STANDARD. Shopping around the best price I could find was over at NewEgg for $120. Multiple that by the people who need it, were looking at good amount of money to get back a single feature we had before!
So were going right back to Acrobat 9 standard because it does what we need it to do. My plea to adobe is to bring back the portfolio feature! Either that or don't screw up the contents of forms in a standard combine!
Is this the latest trend that new versions of software are designed to take away features or functionality that people depend on? I mean even Windows 8 takes away the start menu (I know there's freeware to get it back). Please don't stoop to Microsoft's level and remove thign's people depend on.

We are also going through some of the issues with Acrobat standard being gutted. In acrobat 9 standard we have some processes that used a function called "Export Multiple Files.." This allowed you function through a wizard to select as many files of many file types as you wanted and export them to a ton of file formats. I use this on a daily basis and now i am being told it is not available in the standard version. If i buy the PRO version it is available, but what will keep Adobe from from removing this from the Next version of PRO and call that PLATNUM or somthing. This not the way to treat long time customer who pay for and have developed many process using the tool. It is also sad to learn that Portfolio option is no longer available. We will have to go back to 9 until they figure this out. What a massive screw up.

Jpegs blurry after bringing back project

Similar Messages

Maybe you are looking for