JPEGs stored on Fantom Drive will no longer open in Preview?

Hello,
I'm unable to view JPEGs in Preview after they have been stored on my external Fantom Titanium Hard Drive. When the photos are moved back onto my Powerbook, I get the following error message within Preview:
"FILE ERROR
Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize."
Thumbnails of the photos do show up in Finder and Photoshop will open the files, but only after the following message:
"This document may be damaged (the file may be truncated or incomplete). Continue?"
Does anyone understand what the Fantom Drive is doing to the JPEGs and is there a fix other then re-saving all of the images using Photoshop? I fear image degradation if I have to do this. Also, is there a way to stop this "conversion" the next time I store images on the FD?
Thanks for the help.
Violet
Powerbook G4 Mac OS X (10.3.9) Preview 2.1.1 (v211) Photoshop CS (v.8)

I don't have that drive, so I can only speak generally. I think that's a USB2 drive. Barring an actually defective drive, it may be PC formatted. Ordinarily, that in itself doesn't seem to cause me any problems, but I would use Apple Disk Utility (in your Applications/Utilities folder) and reformat the drive as a Mac OSX extended - journaled volume, then try again. I've seen some instances where PC formatted drives cause Mac problems.
Disk Utility can also do some basic function tests of the drive.

Similar Messages

IPhoto library on external hard drive will no longer open

I'm hoping that someone will be able to point me to a simple solution to my problem...
I'm running iPhoto 9.6 on a MacBook Pro (Retina, 13 inch, mid-2014). The OS is Yosemite 10.10.1. Because the flash storage is only 250GB I have my main iPhoto library (146GB) on a partition of an external 1TB Lacie Rugged drive. The external hard drive also has partitions for Time Machine Backup and SuperDuper Bootable Clone. I have a separate, much smaller iPhoto library on the MBP which contains recent photos.
Yesterday I failed to reconnect my MacBook Pro to the power source when I put it back on my desk. The result was that the battery went below 5% and the MBP turned itself off and also ejected the external hard drive (some time after I reconnected the power cable there were dialog boxes on my screen informing me that each of the three partitions had been ejected incorrectly). I waited until the MBP was fully charged before I tried to open my 'main' iPhoto library on the external hard drive. I received a message that the library would have to be upgraded to work with the computer (very odd, because it had already been upgraded last October when I upgraded from Mavericks to Yosemite and has been working without any real problem ever since then).
After some hours when the only message on the screen was 'Rebuiding Thumbnail Caches' I pressed Cmd+Option+Esc I saw that iPhoto was 'Paused' - that message subsequently changed to 'Not Responding'. I 'Force Quit' iPhoto but the iPhoto library will not open at all from the external drive.
As a test I quit iPhoto and re-started using the Option key and chose to open the iPhoto library which is on the internal drive and it opened without any problem.
I recall that it used to be possible to fix this sort of thing (perhaps not) by trashing the com.apple.iPhoto.plist file, however, I don't seem to be able to find it :-(
I'm really at a loss as to how I should approach this problem and I would be very grateful for any suggestions that can be offered.
Cheers
Tricia

Further update ....
I downloaded and installed iPhoto Library Manager and then chose Library - Rebuild Library. Unfortunately, when it had finished the result was 0 images in any file or folder. I checked the log (which is incredibly long) but here's the beginning of it which seems to indicate that the problem is that an essential file is missing -
2015-01-21 10:49:18.671 iPhoto Library Manager 4.1.11; iPhoto 9.6; OS X 10.10.1; unregistered
2015-01-21 10:49:19.033 Rebuilding library /Volumes/Pictures/iPhoto Library
2015-01-21 10:49:19.033 Rebuilt library located at /Users/Tricia 1/Pictures/iPhoto Library (rebuilt).photolibrary
2015-01-21 10:49:19.035 Building preview…
2015-01-21 10:49:19.042 Photo transfer settings: source libraries = /Volumes/Pictures/iPhoto Library, copy faces = true, copy places = true, combine album contents = false, photo attributes copied = (comment, date, flagged, hidden, latitude, longitude, name, rating)
2015-01-21 10:49:19.042 Loading data for library /Volumes/Pictures/iPhoto Library…
2015-01-21 10:49:19.056 Version number: 9.6
2015-01-21 10:49:19.057 An error occurred: Trying to load database for library “/Volumes/Pictures/iPhoto Library” failed. Some information such as faces, places, and edit history may not be transferred succesfully. (error = Error Domain=PLDatabaseErrorDomain Code=1 "The SQLite database file could not be found." UserInfo=0x10e9c1c10 {PLDatabaseErrorVendorErrorKey=14, PLDatabaseErrorVendorStringKey=unable to open database file, NSLocalizedDescription=The SQLite database file could not be found.}
After this each entry has a dialog that basically says the image file is missing from /Volumes/Pictures/iPhoto Library.
As mentioned in an earlier post I do have another iPhoto Library on my 2008 MacBook.
Can someone advise the best way to proceed? I'm thinking that I should erase the partition of my external hard drive that is called Pictures and then connect the external hard drive to my 2008 MacBook and simply drag and drop the iPhoto Library to the Pictures partition. IIRC, that's the way I moved the iPhoto Library last October when I bought my new MacBook Pro which didn't have enough storage for me to be able to store my iPhoto Library on the MBP. I could then reconnect the external hard drive to my MBP and the iPhoto Library should reappear, shouldn't it?
Looking forward to more input ...
Tricia

Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
thanks

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

My WD external hard drive will no longer show up on my Macbook pro.

My WD external hard drive will not longer show up on my macbook pro. The light turns on and you can hear it running but it won't show up either in finder or in the disk utility. This happened a while ago but I really want to get all my photos off the hard drive. Is there anything I can do to get my computer to read it again or get my data off of it?
I don't have access to another Mac to test it.
Thank you

dead sata bridge card. very common problem.
see all about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
verify HD on another Mac however, if same, dead SATA card most likely

My external hard drive will no longer connect to my macpro......any ideas on how to solve this problem??

My external hard drive will no longer connect to my macbook pro via FW800........Any ideas on how to solve this??

Reset the SMC, see this Apple note: http://support.apple.com/kb/HT3964
Also reset the PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
In most cases, those two actions will fix the port issue. If it's still an issue, you may need to see if the external hard drive can connect to another system, to ensure it's not having problems.

My disk drive will no longer read my disks being inserted how do i fix this?

my disk drive will no longer read disks that i insert in there how do i fix this?

Take it in for repair.

Owc mercury elite external hard drive will no longer come up on my desktop

owc mercury elite external hard drive will no longer come up on my desktop?

Can Disk Utility see it?

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

Firefox will no longer open completely. My home page appears, but I can't do anything with it. See "details" box for full description.

Firefox will no longer open completely. My home page appears, but I can't do anything with it--can't use "Help," can't search the Web, can't even use "Sign Out." I have to close it entirely to get out of it. A box comes up and says "Yahoo Mail is loading especially slowly" and tells me my computer speed is slow. But this is the same computer I've always used for Firefox, and Yahoo comes up quickly and completey through Internet Explorer (which is how I'm sending this message). Can anyone help me load Firefox so that it works? I even downloaded the latest version of Firefox, but it makes no difference. Thanks.

Do a clean reinstall and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\) before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
You can also try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that works.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Safari on iPod touch will no longer open any web pages even after reset.

My iPod touch will no longer open any web pages via Safari. I am connected to WiFi and other apps work fine (mail for example). I connected to Itunes and did a reset - still no luck. S/w is up to date for this version of touch - 4.x.
Please help with any ideas?

hello susnyk, please see [[Fix problems connecting to websites after updating Firefox]] &
[[Firefox can't load websites but other browsers can]]

Pages 5 document will no longer open in pages 5

I upgraded to Mavericks a few days ago and afterwards, I had both Pages '09 and Pages 5 in my dock, instead of one of them being in the applications folder. They are both still in my dock. I have looked briefly at Pages 5 and determined that, at this time, I prefer Pages '09. All of my documents were created in Pages '09 and now they will no longer open in Pages '09. (Some will, and I don't know what the difference is between the ones that will and the ones that won't) When I try to open one, it either opens, no problem, or I get the message "The required index.xml file is missing." This message is in a rectangle with an icon representative of Pages '09 (the inkwell). Since it has this icon, I'm assuming that I was trying to open it in the Pages '09 version, which is what I intended o do. Since this didn't work, I tried to right click and "Open with Pages.app (4.0.5)" and got the same message. I was a little afraid to try to open it in Pages 5, since I've heard rumors that this could ruin the document. I would like to be able to use either of the apps but, since I apparently can't do that, I gathered my courage and opened a document in Pages 5. Everything seemed to be okay, so I opened a couple more. One of them, I even was able to edit with no problem. But when I tried to open it again hours later, I got an error message saying ". . . can't be opened because it is from an "unidentified developer". What's going on here? The only people involved in this document are Apple and me. What "unidentified developer" are they talking about? And why was it fine, then a few hours later it was not accessible? If I'm forced to use only Pages 5, I guess I can live with that, but it seems as though I will have to live in constant fear that, at any time, my document will not open. I've read about a lot of other people who are having problems, too, but not this particular one. I'm at a loss and, like everybody else, I have important documents that I need access to. I'm using an iMac and 10.9.4. What to do?? I need my stuff!

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading.

The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it. After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

I'll back up Csound on the MacKeeper thing. In fact, I actually wrote the following about it:
http://www.reedcorner.net/news.php/?p=245
Remove is ASAP. Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it. Try this:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple. However you have gotten it, your best bet is removing it. See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
http://www.reedcorner.net/guides/macvirus
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

HT4634 I just did a software update and my mail box will no longer open. Can anyone help me?

I just did a software update and my mailbox will no longer open. Can anyone help me?

Try opening mail, highlight your mailbox, under mailbox menu click rebuild mailbox.
Hope this helps.
Best

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while

JPEGs stored on Fantom Drive will no longer open in Preview?

Similar Messages

Maybe you are looking for