Jpg and raw suffix not appearing on filename in aperture 3.4

Using macbook pro running mountain lion and aperture 3.4.5. org and jpg suffixes not displayed on filenames on jpg and raw pairs imported from olympus omd em-5. in addition the suffixes not displayed on older images previously imported from other cameras.
Thanks for your help.
Mark

Have you ever seen the file name extension shown as part of a Metadata Overlay?
That is puzzling, Kirby - I have always seen the filename extension in Aperture; in the Inspector Info panel, the Viewer, the Browser.
I tested again with raw+jpeg pairs, to see, if there is something peculiar about pairs - if Aperture thinks, the filetype should be clear from badge, but I am seeing the extension always.
Even when I created the image file and imported it into Aperture while the Finder option "Show all Filename Extensions" has been disabled, Aperture would still show the extension.
But I noticed, that in Basic View Aperture would give precedence to the version name and display the version name and not the filename, even if I selected the filename with a higher priority in the list of metadata tags. So I deleted the version name from the views and added the "Show metadata labels", to be sure to see the Filename extension. And surprise - Aperture had been showing version names in the basic view overlays instead of the filename, when both filenames and versionnames had been selected, even with the filenames selected first.

Similar Messages

JPG and RAW files are not grouped together.

I am finding that my RAW and JPG files are not grouped together. They show up on the Grid View as JPG for the JPG file and RAW + JPG for the NEF(RAW) file. This does not seem to be consistent through out the folder. Some of the pictures are grouped together and others are not. The ones that are not grouped together have been auto-stacked and then unstacked. I am not sure if this is what caused the seperation of JPG and RAW files. I did try to take a picture that I had auto-stacked it and then remove it and it did not sepearate. The "Treat JPG files next to raw files as seperate photos" option is turned off, like it is in my Lightroom 3.

This is what I'm talking about:
Show subfolders are on:
In windows Explorer:
In the Import Dialog:
Where are the files?
If I click on the Folder 2014_12_14... all the files from all folders will populate.

BUG: With same name jpg and RAW in same folder

OK, we have established that you can't import same filenames RAW/jpg into the same folder, but you can drag them in later. This is useful for stacking.
Bugs that occur when jpg and RAW with same name together in same folder. (have not tested for psd, tif etc.
1. If you rename the jpg, the RAW also gets renamed
2. You cannot move the jpg properly within the folder in grid mode.
Most of my landscape shots need to go to photoshop. I developed a nice workflow which integrates PS quite well with LR...see post here:
http://www.adobeforums.com/cgi-bin/webx/.3bc34679/5
I created the workflow so that I could retain same name RAW/jpg stacks in the same folder. I have altered the workflow slightly so the jpg gets autorenamed with filename_# ... see the link above.
Kev

It's the same design issue Kevin. Sidecar files get renamed automatically and these are treated as sidecars.

Can I merge a JPG and RAW folder in a catalog and keep the edits?

I usually shoot RAW plus JPG and always used to copy all of them into the same folder. That worked fine, but was a little pointless as the JPG was only used as a temporary preview before the RAW was loaded in behind it. For speed of editing at events, I started to split the files in to two separate folders and import both, but tag and do basic edits, crops etc on the JPGs so for 'news' website use, then work on any higher quality client requirements from the RAW. It would be nice if I could later merge the two together so that those basic edits - and ratings etc - were then applied to the RAW files. They have the same names - bar the extensions, of course - having be renamed by LR on import. I tried it on a test shoot, but it just seems to add separate JPG and RAW images to the catalog. Is there a way to have it associate the unedited RAW with the edited JPG?
Guy

Cornelia-I wrote:
Hello Guy gswarbrick,
I am not sure I understand where your current workflow with the JPGs saves you time:
Do you load them into your LR catalog, and do you do the ratings and crops there?
Then for selling on the web you export the JPGs thusly edited from LR?
Do you use a laptop on site/in the field for this?
I am just wondering, where you would actually loose time if your workflow would be the following:
General preparation of your LR set-up:
Define a default develop setting for RAWs that matches your camera's JPG-conversion pretty fine, so that the result would be almost identical without any explicit develop edit.
Define a default export setting for your JPGs to be sold on the web on the day: choose the quality, the size (resizing rules) fit for web, colour space most probably sRGB, ... (no adding to the catalog)
Workflow during the shooting day:
Only import RAWs, no JPGs at all. [Do you fear this takes longer than imprting the JPGs?]
Do the quick stuff during the day like you do today on the JPGs, just on the RAWs. Should also be rating/labeling and cropping, nothing more thanks to your prepared default develop settings.
...Compared to any option with ExifTool or the like for the final RAW-work (4.) you would definitely save the time there.
So the question is: would you really loose time during the critical phase on shooting day?
I guess not, provided your default develop settings achieve pretty much your camera's jpg-conversion. You may need to experiment a little there, make these defaults specific to ISO ranges and camera serial number if you shoot with several cameras, but once this prep is done there should be no more substantial delay.
Unless you post the images directly from camera to the web without passing through LR catalog. Or your field laptop would be of very low spec.
Where to start? Let's start with my laptop; it's about the highest spec available, coupled with Sandisk Extreme Pro cards and a high speed card reader. What about my fear that importing the RAWs would take longer than the JPGs? Well, a small, basic JPG is about 500k, the equivalent uncompressed RAW file is 12Mb, so I reckon about 24x as long to import - give or take. Plus the time to render the RAW file, which isn't required for the JPG. And that's assuming I'm not adding default develop settings, which have a small but not insignificant overhead. For that reason, the RAW imports are usually done after the events or during (rare) breaks.
I've arrived at this workflow through 5 years of experimentation. RAW-only simply does not work for these sorts of events. Most of my 'competitors' shoot JPG-only, for that very reason, but I don't want to lose the RAW option for the print work.

When showing JPG and RAW files as one, which do we see and which is edited?

Hi Guys,
Hoping someone out there will have the answer to this.
Just come back from a long trip with thousands of pics in RAW, I like to use Canon DPP to generate the JPGs quickly and to give me Canons interpretation on the RAW image. (Apparently same processing as in camera).
Once imported into Lightroom 3, I have set up to view the JPG and RAW files as one.
There are two questions:
1.) Which of the two is the visible one in Library mode? can one set the preference?
2.) Which is edited?
I do not really want to fully develop all the pics in Lightroom as some of the standard shots have come out perfectly and at the same time I feel I need to be able to compare them.
Any help offered would be greatly appreciated.

1.) Which of the two is the visible one in Library mode? can one set the preference?
Raw only. The jpeg is sort of like sidecar. Cannot set a preference. The only setting you can change is to view them separately.
2.) Which is edited?
Raw only.
... and at the same time I feel I need to be able to compare them.
Lightroom's Canon-specific DNG profiles are developed to match Canon's picture styles (or whatever they are called). So, if you use, say, the Faithful Picture style in Camera, Lightroom's "Camera Faithful" profile will render your raws very close to DPP, if not identical. That's for default settings. However when you start adjusting, Lightroom's and DPP's processing may differ.
You may not even need those Jpegs for comparison, after all.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

I upgraded to iTunes 11.0. My iPod Nano 4th Version will sync, but music and playlists will not appear to manage and add more songs. Is there a fix?

If I go from 'Devices' to Summary and then Music, I only get one option-Sync Music,There is a box on this page but the options within it are grayed out. If I tick the Sync Music option I get this message-
'Are you sure you want to remove existing music,films,ect, from this ipod and sync with this itunes library?
'Music synced to (my ipods name) from other itunes libraries will be removed and items will be synced from this itunes library' I have only ever used itunes on this PC and the 'Manually manage music and videos' is ticked but
that must be a default setting as I haven't ticked it.

The Shared option is not appearing in my list. I am turning it off and the back on and it is not appearing. Please HELP

Been trying for anout 1 hour now and no joy. I am trying to transfer all my music and apps etc from my old laptop to my new and read home sharing would be the easiest. However I am switching home sharing on and it is not appearing on the list.
Help would be appreciated.
Thanks

Device not detected in iTunes for Windows

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

TS1369 iPhone does not appear in iTunes and also does not appear as a disk drive in My Computer (Windows XP)

iPod does not appear in iTunes and also does not appear as a disk drive in My Computer (Windows XP)

iPod or iPhone?
iPhone and iPod Touch will never show as a disk drive.
If it's an iPhone, this might help: iOS device not detected in Windows

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5? Thank you.

After reinstallation of Outlook 2010 on my Laptop, Contacts and Calendar did not appeared while they are exist in my iphone 5 by using icloud. What I should do to get Contacts and Calendars in sync with iphone 5?
Thank you.

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Jpg and raw suffix not appearing on filename in aperture 3.4

Similar Messages

Maybe you are looking for