JPG´s will not import into lightroom 1.4.1 ("the file appears to be unsupported or damaged")

I have converted a collection of raw files with Autopano pro to jpgs.
When importing them into lightroom 1.4.1, part of the collection is not displayed in lightroom and the software gives me the msg "the file appears to be unsupported or damaged".
The same files open up with any other jpg supporting software.
Can anybody help me with this

I was not aware of this pano program but have downloaded a trial copy and will give it a go. I just did a set of images that PTGUI could not deal with and it looks like this program did it perfectly even without muddling with the control points. Its also dealing with 1 image where I cropped out a conflicting angle of view area.
I just imported the jpeg out of this package into LR with no problems. I edited it after import to LR with Photoshop CS3 to do a cleanup crop of the pan.
I'm very impressed with PanoPro right now. Will have to purchase. PLUS...it runs either Mac or PC!!! Solves yet another problem I've had with my conversion to Apple.
Lee

Similar Messages

.CR2 will not import into iphoto 08 7.1.5

I have a few hundred photos taken by a friend that i am trying to import into my iphoto library.
Getting an unrecognizable file message.
I shoot on a Canon XSi in RAW and have no issues importing to iphoto, Apature or photoshop....
her images were shot on a Canon TSi in RAW and will not import into any of my programs.

The fact that you can use the Raws from your XSi is of no relevance.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Changing the Raw specification is one of the ways of upgrading the cameras.
IPhoto and Aperture support - or don't - the same cameras.
Regards
TD

Lightroom 1.4.1, Files appear to be unsupported or damaged

Hello Everyone.
Here are my specs:
Lightroom 1.4.1
Mac OS X 10.6.1
Canon T1i Raw Files .CR2
Whenever I try to import files into Lightroom 1.4.1, I get the following error:
"The files appear to be unsupported or damaged."
This happens on every single image. I can open them fine with Aperture, and Photoshop CS3. The files are being imported to my computer, and are straight from the camera.
There are no updates available for Lightroom 1.4.1 when I check. Anyone else have this problem? Is there a fix?
Thanks,
Justin

That means the camera is probably not supported on LR 1.4. You either upgrade to LR 2 (costs money), or you use the most recent (free) dng converter to convert your CR2 files to dng files. LR 1.4 will read those fine.

Lightroom has trouble reading RAW files on my network drive ("The file appears to be unsupported or

Hey guys, I currently run LR5 on Mac OSX. I've had my RAWs on an external HDD and have smart previews built for those files. Recently, I upgraded to a new router, the ASUS RT-N65U, and plugged in my WD My Passport Ultra HDD (FAT32 filesystem) into to. Now I've put my RAWs on the network drive, and verified via MD5 checksums that the files are being read correctly (albeit rather slowly) from the network drive.
However, whenever I try to view one of the photos on the network drive, Lightroom complains, "The file appears to be unsupported or damaged". I've verified via MD5 that the files are not damaged. Does anyone know how I can get LR to be happy with the files on my network drive?
(Bonus question: how do I make my network drive faster?)
Thanks!

Got RAWs from a D7000 and D600, LR v5.2 [922700].
Oddly things are working now... I ejectected the network drive in Finder and reconnected to my router. Lightroom no longer has problems viewing the photos, even after I closed my laptop and reopenned it. I think the problem might occur when my laptop goes to sleep for a long time and I reconnect. Will repoert back when I try that.
I'm using an external HDD attached to my router. The reason I don't plug the external HDD to my laptop directly is I don't want to keep doing it every time I want to access my photos, and my laptop only has limited disk capacity since it's an SSD.

Problems with iTunes 8: NBC .m4v shows will not import into iPhone v2.02

I am a little confused. I have downloaded some NBC shows that are.m4v format, yet they will not import into my iPhone with iTunes 8. I receive the following error msg in iTunes when trying to sync:
Example "Mr. Monk Buys a House" was not copied to the iPhone
because it cannot be played on this iPhone.
Am I doing something wrong? Do I have to convert shows from iTunes to a different format before I can watch them?
PS Same error msg occurs with iTunes Podcast .mov format.
Any suggestions?
Txs

Well, after a little research in the iTunes Support Browser, Apple finally made the answer available.
Though Apple designs all products in iTunes to play on iPod type devices, the new HD programming will not.
The programs that are being "given away for free" are being promoted in HD format, and that's where the links on the iTunes page takes you. The iPhone 3G cannot handle HD programming, and thus the error message. (why couldn't they just have said that in the error msg, rather than have me go and look for half an hour. As my mother used to say, if it looks too good to be true, it probably is.
A couple of pointers for the free, give-away HD shows from NBC (iTunes way of telling NBC welcome back). These will not work on the iPhone 3G v2.02:
Mr. Monk Buys a House (HD)
Merit Badge: Pilot (HD)
30 Rock: Secrets and Lies (HD)
Battlestar Galactica, Season 4: He That Believeth in Me (HD)
etc.
Yes, if you look close enough in the show description, they are also making these available free in SD. Hope this research saves somebody a headache from buying the wrong programs.
You're welcome from a friend in Texas!

I can not import in Lightroom 4.4 any RAW-file from my D600. Lightroom gives no picture.

I can not import in Lightroom 4.4 any RAW-file from my D600. Lightroom gives no picture.

How long have you waited?
When I connect my D600 via USB and import in Lr it takes a long time before the image thumbnails are displayed in the Import Dialog.
I know that using a card reader would probably be much faster (you gotta try that!).
In the meantime I just do something else for 5-7 min (read e-mail, get a cup of coffee) and thereafter the thumbnails are displayed and import is straightforward.
And I do have a powerful and fast system.
So, somehow Lr and the D600 are slow to begin "talking" to each other.

Bookmarks Safari 5.0.5 will not import into Firefox 17.0 with Mac OS 10.6.8

I am on Mac OS 10.6.8. When trying to import bookmarks from Safari 5.0.5, they will not import/display into Firefox 17.0.
I have tried the following from the bookmark menu:
Import Bookmarks from HTML...
Import Data from Another Browser...
No bookmarks display when I click ok for each, even after quitting and restarting firefox.
Am I doing something wrong?

Hello nureste, try the next : open Safari> File > Export Bookmarks and save the html file in your choice location, then open firefox, and as you known, Import Bookmarks from HTML... choose the html file with the safari bookmarks.
EDIT: see also : [https://support.mozilla.org/en-US/kb/import-bookmarks-html#os=mac&browser=fx17 Import Bookmarks from an HTML file - mac]
thank you

H.264 will not import into DVDSP?

So I have been searching several discussion forums and the question I have seems to pop up in each of them, but is never answered???
Simply put, I have a FCP 6 project sequence that is 720p24frame which is an editing timebase of 59.94 with an aspect ratio of 960by720.
This is an 8.5 minute piece so I know that it will fit onto a regular DVD-R.
So I go through compressor and compress it into both an MPEG2 and H.264 - each at an HD bit rate.
Then I set up an HD project in DVDSP and try to import the two. The MPEG goes in fine and burns with no problems. My BlueRay/HDDVD combo player is on its way in the mail so I can't test it, but it will not play in my SD DVD player. Then I try to import the H.264 - It states something to the effect of not a compatible format....
That is my question - Why will the H.264 not import into an HDDVD project in DVDSP - all of the settings are correct from the initial edit - through compressor - through DVDSP.
Thank you for anyone who can help - we have a large festival coming up that has the option of 35mm or HDDVDs (we cannot afford a print).

So...this issue is somewhat solved.
I have done several exports using the provided H.264 presets then tweaking them each to my own set specifics. There are four places in the formats sections of compressor that have H.264 as a codec - one of these is for iPod and web so I disregarded that one completely.
I always applied the same settings as to have a control base when doing this experiement - I haven't done a science project in probably 15 years. I also pushed the bit-rates to the highest level.
After many hours in and out of compressor and DVDSP, I found only one of of the presets loaded properly into DVDSP - the 60min under HDDVD H.264 preset (altered to my higher bit-rate)
I am still waiting on my player to try it out, but it did burn fine. This is all so strange since all of my own settings (bit-rate) and other data was constant.
Oh well...at least I've got one test completely burnt.

Change from Pc to Mac now Lightroom gives error "files appear to be unsupported or damaged"

I recently upgraded from my PC to a Mac osx 7.1.
I have Lightroom 2.
On my pc I can pull up any pictures off any of my SD cards (format: RAW). However, although I have installed LR2 onto my mac it will not allow me to open any of them. It gives me the error, "files appear to be unsuported or damaged."
They will open on my PC and also will open on my Mac in gimp. So I know the files are not damaged.
How can I fix this problem?
Thanks!

Thank you so much for responding! How could I have forgotten that I had updated LR on my pc? ... I upgraded to 2.7 and it is now working perfectly with RAW files.
Thank you!

PHOTOS FROM IPHOTO WILL NOT IMPORT INTO CLIP VIEWER WHERE MOVIE IS CREATED

ok...please answer this question...i NEED it to be answered!!!!! When I try to put the Ken burns effect on a photo and then import it into the clip viewer, it will NOT let me!!!! Please H~E~L~P ME!!!!!!!!!
HELP ME!!!!!

Welcome to discussions!
You have not told us enough information to H~E~L~P you.
We need to know everything about your Mac, hard drive space (look at mine below). Go to "My Settings" at the right of this screen and fill out that information please.
In the meantime, i'll throw a couple of ideas your way:
If you are you trying to edit a previously imported image rendered by the Ken Burns Effect, there's an iMovie bug that prevents us from updating the clip when we empty the iMovie trash.
iMovie HD 6 requires Quartz Extreme-compatible graphics cards
http://docs.info.apple.com/article.html?artnum=303683
Sue

Movies from my sony 7.2mp camera will not import into imovie?

hey guys,
im trying to import my videos from my sony cybershot digital camera into imovie and its mpeg, but further researching this problem imovie is supposed to reformat it automatically. i tried to do an import from "file" and selecting the video but it will not let me select the video, then i tried dragging it from finder into imovie but it just slides right off, THEN i tried to drag it from desktop to imovie and still did not work. if any1 can help me solve this id greatly appreciate it...thanks!

I just had the same problem yesterday trying to import video clips into iMovie from my Sony Cybershot camera and this is what I learned. iMovie evidently does not support every digital camera format. My clips were also mpeg and start with MOV. Evidently, they need to be converted to another format such as .dv; mpg4 or h.264 - the best quality being the .dv, as I understand it. You can do a web search for Video Converter programs that will do this conversion (some are free downloads). I found that I already had a program on my computer called Roxio Toast Titanium that easily converted my clips to .dv by just dragging them into the video pane and then hitting the Export button. Once the clips were converted to .dv, they imported easily and worked perfectly in iMovie. Good Luck!

MPG files will not import into iMovie

I have some video I shot with a Sony Handycam that I want to import it into iMovie. When In iMovie I can see the MPV files but they are grayed out. I moved them from my work PC. They play fine on the PC. Have they been recoded in some way? When I try and open them in quicktime on the mac I get a message that says they are "not a movie file". I did transfer the files via a thumb drive, but I can't see that causing any problems. Any suggestions?
Thanks in advance

I have some video I shot with a Sony Handycam that I want to import it into iMovie. When In iMovie I can see the MPV files but they are grayed out.
Finder level (i.e. "Import Movies...") files are not converted as part of the import process. Only files imported via the "Import from Camera..." are converted to iMovie '08 edit compatible compression formats. As "muxed" compression formats are not edit compatible in iMovie '08, they cannot be imported at the "Finder level" and so remain "grayed out." ("Muxed" formats contain blocks of audio and video data interspersed in a single stream to provide spatial synchronization while the QT engine is based on temporal synchronization of audio and video contained in separate, parallel "tracks" of data.) Your solution here is to either convert your files to DV, AIC, M-JPEG, Photo-JPEG, MPEG-4, or H.264 files for "Finder" importation or "image" your files so they appear as if they are on a camcorder and let iMovie '08 import/convert the files for edit processing.
I moved them from my work PC. They play fine on the PC. Have they been recoded in some way?
MPEG-2 is a "playback" only format a far as QT is concerned and even then it requires the QT MPEG-2 Playback component ($20) be installed to work. AC3 audio is also not supported by the QT embedded structure and also requires an additional third-party component be installed.

QUICKTIME DVCPRO HD file will not import into iMovie 06HD

Hi...I've searched all over the web. Maybe one of you can help.
Basically I got a clip from a movie I did from the editor. The movie was edited in Final Cut Pro. I don't know versions or anything specific about his system.
I downloaded the DVCPRO HD codecs and i am NOW able to play the footage on my computer through QT Pro (previously I wasn't able to view the clips without those codecs).
However, when I try to import/export/beg the file to go into iMovie HD 06 so I can cut it into my performance reel, it only turns up as a white screen with audio in place: there's no picture but you can hear everything perfectly.
Any ideas? I've tried so many things.
Is it possible to burn the file to a regular dvd, reimport it and it will magically work? I'm going out to buy dvds now to see if that's possible.
I'm running leopard, MBP 200gb
Thanks

hey there mmmm1234,
iMovie06 works w/ DV 25(MiniDV, DVCPro & HDV-720p/1080i). it has no capability for DVCProHD(DV100). see if your editor buddy can give you the clip in one of the listed formats for iMovie. even if he gives it to in the HDV format, you'll still only be able to burn SD DVD w/ iDVD, so it might be best to ask for the clip in an SD format.
good luck.

Iphone 5 videos from iPhoto will not import into FCP

Just bought FCP X and tried to import movies from iPhoto taken with my iPhone 5 and get a message that the file format is not supported. Any suggestions?

To late. The videos were downloaded into iPhoto and removed from the iPhone. I actually exported the videos to my desktop then imported them into FCPX without any problem. It would seem to me that I should be able to import directly. The video format (in iPhoto) is supported according to the apple web sight. Any thoughts?

Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Anyone have a clue how I can open or convert the Adobe Connect FLV file?

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

JPG´s will not import into lightroom 1.4.1 ("the file appears to be unsupported or damaged")

Similar Messages

Maybe you are looking for