.JPGs used in the drop/drag quiz questions

In Captivate 4, can .JPGs be used in drop/drag quiz questions? We need to see if Learners can properly "build up" a sub-assembly of a machine and they will need to know which part fits on top of the correct piece of equipment.
If not, any suggestions?

No.  Currently no version of Captivate allows you to set up drag and drop interactions natively with images as the drag objects or targets.
However, there are two widgets that can be purchased to do this:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/which-adobe-drag-and -drag-and-drop-widget-comparison
Free trial versions of the widgets can be downloaded here if you want to try them out:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Similar Messages

  • ITunes says that my iPod cannot be used because the required software is not installed.  Says to install 64-bit version.  Problem is 64-bit version is installed already.

    I have a 64 GB iPod operating on iOS 5.1.1 (says software is up to date).  I finally was able to download iTunes 64 Bit to my computer and open it.  Now when I connect my iPod to the computer, I get a message saying "This iPod cannot be used because the required software is not installed.  Tun the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."    I have removed iTunes from my computer and downloaded the 64-bit version again and installed it.  I still get the same message.

    Hi antiklady,
    I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
    iTunes: How to find which version you are using - Apple Support
    http://support.apple.com/en-us/HT201521
    If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    http://support.apple.com/en-us/HT1923
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • How can I get the drop down menu on the internet to work, which shows most visited websites? It was working on Firefox, and now doesn't.

    On the internet when using Firefox, the drop down menu on recently visited sites (where you type in web addresses), does not work. How can I get it drop down and show websites that I recently visited, so I can click on them there instead of retyping them every time?

    Make sure that the Location Bar is not set to "Nothing":
    * Firefox (Tools) > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Font size in drop-down fill in the blank quiz questions.

    I've migrated an old Quiz from Captivate 4 to Captivate 5. All went reasonably well except for the fill-in-a-blank questions. Fortunately there are only relevatively few of these, but I've encountered a strange problem when I started to do this.
    I've set up a style which applies to the fill-in-a-blank question, using biggish text (30pt) because the viewers of the test will not have perfect vision. The text reproduces fine when I publish with the exception of the text in the drop down box. This is appearing as what looks to be about 10pt and not in keeping with the style that applies to the question.
    Here's what I mean...
    I've looked up and down the menus and in the helpfiles but I can't find out how to control the drop-down text size. Any help would be gratefully received as otherwise I'll have to abandon this type of question.
    regards,
    Henry

    Hello Henry,
    Have reported this issue to the Adobe team, but cannot help you to solve it.
    If you could replace the dropdown list by really to type words, there the style of the sentence itself is taken over.
    Lilybiri

  • This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

    This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

    See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

  • If i use Ps5 the order lasso, drag and drop or letters the win vista crashes down. Can anybody help?

    If i use PS5 the order lasso,drag and drop or letters the win vista crashes down. Can anybody help me?

    Now that I'm looking at it, I don't have it... but I still have the problem:(. I rebooted the PRAM, I cleaned my permissions, run utilities checks, nothing helps, I'm at the end of my wits. I called apple - all I got was bad attitude... I don't know what to do, this disfunction makes it impossible for me to work....
    does anybody know what I could do to fix this issue?

  • Reporting Scores without Using the Built-in Quiz

    Is it possible to set up a 'quiz' in captivate, without using the built-in quiz slides?
    The quiz slides are quite restrictive and clumsy and I'd rather build them myself.
    So, say if I had a slide that had a question on it and two answer buttons, 'true' and 'false'. Is it possible to use these buttons to execute an advanced action that assigned a score that could then be reported to the LMS?
    Sorry if this is a silly question.
    Best
    M

    Maybe you never found my blog? Have several articles about custom questions and reporting of those questions.
    Report Custom Questions - part 1 - Captivate blog
    Report Custom Questions - part 2 - Captivate blog
    You can search more, using tags. There are some limitations with custom questions: no question pools, reporting partial scores and penalties are difficult/impossible if you do not use JS.  Drag&Drop is a hybrid question type that allows more customisation as well. Here are the latest articles about custom questions:
    Custom Short Answer Question - Captivate blog
    Custom Hotspot questions in Captivate 8 - Captivate blog

  • Thanks to the super-users, and questions on backgrounds and drop-down menu

    Hi all.
    I've spent a fair amount of time perusing the archives, so I don't have to bother you all with the basic questions. Great thanks to Wyodor, Old Toad, Ethmoid and Cyclosaurus for their excellent and oft-repeated tutorials.
    With your help, I've figured out how to set up a personal domain name, modify my background image, and create a drop-down menu. (These were major accomplishments for a neophyte like me.) My primitive template can be seen here:
    http://www.monroekarate.org/dojo/Template.html
    And I am pretty happy with it. I have one problem, and one minor element that I'd like to fix.
    The drop-down menu was created following the excellent tutorial from the iWebfaq but I notice that although it looks perfect there is one malfunction. If you hover and try to select an element where there is no underlying content, it works fine. When you try to select a list item with underlying content, however, the drop-down disappears. Any idea why that happens or how I can fix it? I suppose I could just add a space buffer, but that is an inelegant solution.
    On a more trivial note, the background was actually supposed to be composed of two images. The top row was supposed to be a horizontal set of tiles (slightly darker in color) and the rest of the background was tiled in a second image, giving a gradient effect. I used the script Wyodor described here with repeat set to yes which gave me single-image tiling. Looks OK, but if I could get both sets of tiles used it would add substantial richness to the visual effect. Ideas?
    Thanks again for all your help to date, and thanks in advance for considering this issue!
    Cheers,
    Liam

    I appreciate your reply but those arrows were not the ones I was trying to describe. In the same box where you would type your web address on the far right is a small star and then next to it an arrow pointing down. If you click on this arrow, it normally drops down a list of the websites you commonly use. Or, if you are on a website ordering something, there might be a similar arrow that you need to select in order to choose which shipping you might want such as ground, next day air, etc., these are the kinds of arrows that are not working correctly now. Any ideas on these? Thanks for trying to help me.

  • How to use the drop event of the tree control in LabVIEW 8.20?

    Hi,
                I am using the two tree controls in my application to provide a option for the user to drag and drop item from one tree to the other.  I have to validate the user selection. I tried to capture the user drop event  using the event structure. The problem I am facing is, I am not able to drop the item even though i have wired a constant true to the filter(Accepted?) in the event case. I have enable the property(Allow droping) in the right menu of the tree control also.
              While configuring an event case for (drop, drag entered and some thing like this) only I am getting the problem otherwise it is working fine.  
    What do i need to do to caprture the drop event ?
    Is there any way to avoid the item duplication while droping a new item in the tree control ?
    or how can i do this?
    Thanks,
    Pandiarajan R

    Hi Pandiarajan,
    I hope you are doing well today! There is a lengthy discussion on the Tree Control Drag & Drop feature at this forums post including contributions from the developer of the Drag & Drop feature:
    Tree Control Drag & Drop in LabVIEW 8
    By avoiding item duplication, do you mean that you don't want the same item to be in the old tree control or do you not want more than one item in the new tree control?
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this?

    Question
    I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this? I currently use this on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.

    Hi Ruthannw,
    I think you are talking about the [[Bookmarks Toolbar]]. That article will show you how to add sites to the toolbar and even how to display the toolbar if it is hidden in your new Firefox install.
    Hopefully this helps!

  • Looking for some help on emailing results using the drop down Label instead of the value

    DWMX / SQL / ASP
    I have a very simple form... 4 fields
    1 - Textbox to enter name
    2 - Drop downs to select location and type of issue
    1 - Comment box to describe in more detail the issue....
    I have notification setup to email the results to the
    appropriate person
    upon submission.. the issue im having is the following.. the
    email will go
    to the department that needs to get it based on the Issue
    drop down... the
    drop down is populate from a table containing 2 fields (
    Issue Name and
    Email )
    My question is how can i capture the label name instead of
    the value which
    in this case is the email address?
    I want the email to be sent to the email address, but i want
    the email to
    display the label name....

    Try this,
    <%=(rsCombo.Fields.Item("issue").Value)%>
    <%
    if recordset("fieldname") then
    response.write "Your Lable Name"
    end if
    %>
    Dave
    "Daniel" <[email protected]> wrote in message
    news:elporq$pd1$[email protected]..
    > forgot to add this bit
    >
    > this is what im using to get the data for that
    > <%=(rsCombo.Fields.Item("issue").Value)%>
    >
    >
    >
    > "Daniel" <[email protected]> wrote in message
    > news:elpns1$o80$[email protected]..
    > > DWMX / SQL / ASP
    > >
    > > I have a very simple form... 4 fields
    > > 1 - Textbox to enter name
    > > 2 - Drop downs to select location and type of issue
    > > 1 - Comment box to describe in more detail the
    issue....
    > >
    > > I have notification setup to email the results to
    the appropriate person
    > > upon submission.. the issue im having is the
    following.. the email will
    go
    > > to the department that needs to get it based on the
    Issue drop down...
    the
    > > drop down is populate from a table containing 2
    fields ( Issue Name and
    > > Email )
    > >
    > > My question is how can i capture the label name
    instead of the value
    which
    > > in this case is the email address?
    > >
    > > I want the email to be sent to the email address,
    but i want the email
    to
    > > display the label name....
    > >
    >
    >

  • The extract drag and drop function in live view on Dreamweaver cc isn't working?

    Hi there,
    I've extracted a PSD mockup into Dreamweaver cc and on the online tutorial it shows you how to drag the elements into the live view, but for me it doesn't allow this, when i drag an element onto the live view screen no icons show up, even though I've set up the div tag containers...
    Any help would be appreciated :-)
    I'm using Mac OS Yosemite if that helps.
    Andy

    Hi Andy,
    Just make sure you are using Live View for drag and drop as it doesn't work with design view.
    Which icon is not showing up? Did you get a text field to edit the asset name if required?
    Please elaborate a bit more.
    Thanks,
    Lalita

  • Lightbox using smartshape in Quiz question

    Hi,
    I'm using one question/quiz slide and would like to create a lightbox to display different comments depending on what choice the user selects.
    In the comment lightbox, I hope to allow the user to click a X image to close the lightbox.  
    The exisiting message boxes do not give the client a look they desire. Are there any other suggestions on alternative message boxes that overlay over the the quiz question?
    Please advise.
    Thank you!
    Susanne

    You could use grouped objects that include Smart Shape buttons for the click to close the lightbox.
    But you need to be aware that the ON Success or On Last Attempt events only fire in Quiz Questions AFTER the Submit button has been clicked and any feedback captions have appeared and been dismissed.  If you want your lightbox captions to appear after the submit button is clicked, you'll need to turn off the other feedback captions.
    As far as having a different lightbox appear depending on which answer the user chooses, that's really only available for Multi-Choice quiz questions, no others (and not even multiple answer questions).  You need to use the Advanced Answer option event to trigger the appearance of the lightbox.

  • Can I modify the Quiz Question default slides?

    In a quiz:
    1. Can I remove the Review Area on question slides?
    2. I seem to be able to manually remove button (such as the Clear button), but I can't copy and paste a button from one slide to another. Is there a way to do so?
    Thanks,
    Jeff

    Hi Jeff,
    The Review area is not meaning a lot any more, because most of the Review information is in the check marks for correct, given and incorrect answers. It is seldom used. I would not remove it.
    If you want to remove something from question slides, don't delete them but uncheck in the Options accordion of the Quiz Properties panel.
    Buttons on question slides are embedded in the question slides, they do not have a separate timeline. Same for the captions like Type of Question, Question, Answers. Do not delete them or you could cause a lot of problems. For that same reason you cannot just copy/paste those embedded objects at all. If you want to change the properties, the location, size, you can use the Quiz master slides and or the object styles for quizzing objects.
    Lilybiri

  • Repainting the GlassPane (Drag and Drop)

    I have A DesktopPane with a glassPane.
    The glassPane paints the outline of the components on the desktopPane That I'll be dragging with the mouse
    I need to be able to move and repaint the outline as I drag the mouse
    Every mouseDrag event I call repaint on the glasspane but the outline does not keep up with the mouse. It falls behind.
    If I call paint directly the outline keeps up with the mouse but it leaves garabge behind.
    How can I speed up the process without leaving garbage behind?
    A previous version of my software (which I inherited) was able to keep up but it was not object oriented so I had to change it to a more OO version to fix other no related problems.
    The older version called an erase method followed by a call to paint directly. The erase method would paint over the old outline that also involved a direct call to the paint method. The problem is that the erase method method won't work anymore because the layers have changed.
    painting the outline on the new position.
    Does anyone have a fast reapint algorithm that may work?
    Thank

    Hi Andy,
    Just make sure you are using Live View for drag and drop as it doesn't work with design view.
    Which icon is not showing up? Did you get a text field to edit the asset name if required?
    Please elaborate a bit more.
    Thanks,
    Lalita

Maybe you are looking for