JPREPARE not found, to do Portal upgrade to NW2004S

Hi all
I am trying to upgrade Enterprise Portal EP6SP17 (NW2004) to  NW2004S-SR1 on HP-UX-PARISC-64bit/Oracle following the instructions in the Upgrade guide for 'Netweaver 2004S Java'. 
On Page no.28 it is mentioned to start JPREPARE to prepare and verify the system for upgrade.  I could not locate the executable JPREPARE on  'NW2004s upgrade Master' CD.
Has anyone faced the same problem in locating  JPREPARE on the media? If yes, on which DVD they found this executable? I look for feedback from anyone who did NW2004 to NW2004S Portal upgrade on any platform.
Thanks in advance....
Nagesh

Thanks Siva,
That worked too.  I was trying to run 'startserver' first before running 'startgui' and getting a different error message. But that is not required.
For the benefit of others I am writing down the steps here:
From the /usr/sap/jupgrade folder:
1. Run ./PREPARE and leave it running.
2. Run ./startgui  (from a different unix session)
to be able to run PREPARE successfully.
Nagesh

Similar Messages

  • IView not found: com.sap.portal.support.browse.default.

    When I try to navigate to System Administration -> Support -> Portal Runtime -> Browse deployment, I get the following error:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    iView not found: com.sap.portal.support.browse.default.
    Exception id: 04:45_02/10/08_0037_13390350
    I referred this thread   [https://www.sdn.sap.com/irj/sdn/thread?threadID=188079|https://www.sdn.sap.com/irj/sdn/thread?threadID=188079]   and removed the .bak extension from the file com.sap.portal.support.browse.par.bak and uploaded it in System Administration --> Support --> Support Desk --> Portal Runtime --> Administration Console ,in the Archive uploader.
    But the problem persists.   Could anybody shed some light on this issue?
    Regards,
    Saurabh.

    Hi Saurabh
    In order to get more information, you should search for your exception id "04:45_02/10/08_0037_13390350" in the default trace file.
    See http://help.sap.com/saphelp_nw70/helpdata/EN/57/5f1140d72dc442e10000000a1550b0/frameset.htm in order to see where the def trace file is found.
    Best regards,
    Martin Søgaard

  • 404 error service not found for irj/portal ??

    Hello,
    I am facing a problem in our productive system. It is a 2-node cluster 7.01 with hostnames v000011360 and v000012360.
    We are using a web dispatcher for load balancing and redirecting.
    When we try to access the portal through the web dispatcher's url, if the redirection is done to the first node (11360), portal logon screen appears and everything is ok. But if the redirection is to the 2nd Node, Service cannot be reached error occurs!
    The user has to refresh the page several times, until the web dispatcher redirects to the 1st Node. A000010360 is the virtual ip of the cluster.
    The complete error message is this:
    Service cannot be reached
    What has happened?
    URL http://a000010360.central.nbg.gr/irj/portal call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system MBP with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:V000012360_MBP_30-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    Any ideas greatly appreciated. Thank you!

    Hi Mark,
    Yes there is a java server running in the second node!
    Also, if the 2nd Node url is written directly, logon screen appears and everything works fine.
    However, this should be done automatically through the web dispatcher (or the message server) load balancing.
    The direct url for 1st Node is http://v000011360:53000/irj and for the 2nd Node http://v000012360:53000/irj.
    Being though a cluster setup we use the virtual url http://a000010360:53000/irj, which should direct to one of the 2 nodes through the web dispatcher. If it directs to the 1st Node, everything is ok, but to the 2nd, 404 error not found occurs.
    Also if server0 in 1st node fails for any reason, we cannot access the portal whatsoever! Shouldn't the dispatcher redirect to the 2nd node which is up and running? Isn't that the purpose of having a cluster system?
    Thank you for your time,
    GS.

  • Libc.so.6 GLIBC_2.16 not found after attempting to upgrade pacman

    Ok so I followed the thread (https://bbs.archlinux.org/viewtopic.php?id=95007&p=1) as best I could and ended with this error:
    /lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libcurl.so.4)
    The script I used is:
    GNU nano 2.2.6 File: PacmanFix
    #!/bin/bash
    arch=x86_64
    mirror=ftp://mirror.rit.edu/archlinux
    # link to cache (or download) and extract: openssl,libarchive,libfetch,pacman
    cd /tmp
    for pkg in openssl-1.0.1.c-1 libarchive-3.0.4-2 pacman-4.0.3-3; do
    pkgname=${pkg}-${arch}.pkg.tar.xz
    if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
    ln -sf /var/cache/pacman/pkg/${pkgname} .
    else
    wget ${mirror}/core/os/${arch}/${pkgname} || exit 1
    fi
    sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
    done
    for pkg in curl-7.28.0-1; do
    pkgname=${pkg}-${arch}.pkg.tar.xz
    if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
    ln -sf /var/cache/pacman/pkg/${pkgname} .
    else
    wget http://arm.konnichi.com/2012/07/26/pool/packages/curl-7.26.0-1-${arch}.pkg.tar.xz || exit 1
    fi
    sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
    done
    # now reinstall using pacman to update the local pacman db
    sudo pacman -Sf openssl libarchive libfetch pacman || exit 1
    # now update your system
    sudo pacman -Syu
    I have found this thread on the problem but so far I have had no luck resolving the issues
    https://wiki.archlinux.org/index.php/De … iki:usrlib
    I have attempted to use the current version of curl, and curl7.26.0-1
    also the pacman -Syu --ignore glibc,curl has not worked.
    I am fairly new to Arch linux but am reasonably competent with computers. I have unfortunately inherited the computer and would really like to get it working again.
    Thanks for the help!

    masteryod wrote:
    Walk us through. When and how did you install Arch and when was the last time you did upgrade? I've got hard time to understand you haven't done upgrade since july.
    PS What was your previous distro? (I don't want to brag, just tell you some differences between Arch and other "easy" distros)
    Ok as I said i unfortunately inherited the computer, so I was not the one to go through the install of Arch.
    I have been using the computer without upgrading, but I would really like to get the computer working properly.
    The last upgrade was probably performed around a year ago. Please let me know any other specific information that would be useful.

  • MSVCR80.dll not found after trying to upgrade itunes

    Tried to update my itunes and now I can't open it all...I get a MSVCR80.dll not found. Itunes not installed correctly Error 7 (Windows error 126)....How do I get the MSVCR80.dll file back????

    See solution posted by turingtest2

  • Class not found Exception for Portal 4.0 console

     

    Hi Ravi,
    For Portal questions, we have a newsgroup called
    weblogic.developer.interest.personalization that would be able to help you
    more on this subject.
    In the meantime, it sounds as if the installation of WLS 6.1sp1 wasn't done
    properly. I would recommend reinstalling from scratch. Between the
    installation of WLS 6.1sp1 and WLP 4.0, you can try running WLS 6.1 in the
    mydomain domain, and see if you can access the console. If you can, then
    you can continue with the WLP 4.0 installation.
    Dennis Munsie
    Developer Relations Engineer
    BEA Support
    "Ravi Kuwadia" <[email protected]> wrote in message
    news:3c1f927e$[email protected]..
    >
    I have weblogic server 6.1 (SP1) running on win2k
    Also installed portal 4.0
    When I try to navigate to the
    console "http://localhost:7501/console/index.jsp" I get following error:
    javax.servlet.ServletException: Servlet class:'weblogic.management.console.webapp._index'
    could not be loaded - the requested class wasn't found in the classpath:'E:\bea\wlportal4.0\......\wl_comp2050.war'
    >
    Can anyone help
    Ravi

  • Reference Masters not found any more after upgrading to 3.1

    Hi,
    anybody else having this annoying problem which I thought was fixed in version 3.0.3 ?
    I upgrade to 3.1 and now have the problem that Aperture does not find reference masters despite the volume (AFP mounted volume on a QNAP NAS) is active.
    Of course this can be fixed by reconnecting the masters manually, but it is a pain. Also it seems that 3.1 is now loosing the link to referenced master randomly or at least in a pattern which I don't get. For instance, in one project I have some pictures with a broken link to referenced masters, where as other pictures in the same project are just ok.
    This is a mess and I'm now seriously considering evaluating t Lightroom, given that this fundamental functionality (access data which is in network storage) is not working in a reliable way. The use case to have masters on networked mass storage should not be too uncommon, especially if you look at the new Macbook Airs.

    powers101 wrote:
    I have the same problem.
    After completing installation 1 to 10 on the upgrade, aperture was just hanging for a long time. I had to force quit it.
    Then when opening Aperture it came up with the error "WARNING: There was an error opening the database for the library "~Pictures/Aperture Library.aplibrary"
    I had to rebuild my database by doing what Mark Taber suggested which worked ok.
    All my photos were referenced.
    Problem is now my referenced files cannot be found when clicking on "show in finder". The error comes up "The file (null) could not be found. It may have been moved, renamed, or deleted. Would you like to locate it?"
    When locating it it only does one photo at a time.
    Any solutions?
    thanks.
    Message was edited by: powers101
    What if you:
    Select all the images in the Aperture browser that are missing>File>Locate Referenced Images. Then when the Referenced Dialogue box appears, try re-connecting your missing files by pointing Aperture to where you know they exist (using the bottom half of the dialogue box).
    I wonder if that will help.
    Best,
    CD

  • Pavilion dv4 1404 tu fingerprint not found after windows 10 upgrade

    After upgrade to windows 10 pro 32 bit from windows 7 ultimate  , i found out that my Fingerprint reader is not working . i installed digital persona from drivers of my laptop but it says fingerprint reader not detected . Help me 

    Hi, Thank you for posting this. You may want to try HP Support Assistant - http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.VdCsr0ZrhOg This is great tool which you can use for various thing. It can scan your computer and provide the best drivers available for your system.

  • Oracle drivers not found by servlets after upgrade of JDK

    I am using jakarta-tomcat 4.0.1 with WIN2K.
    After a recent upgrade to jdk 1.4.0_02 from jdk1.3.1, servlets that try to use oracle crash with this error:
    java.lang.NoClassDefFoundError: oracle/jdbc/driver/OracleDriver
         at ProductLookup.loadJDBCDriver(ProductLookup.java:23)
    the code at line 23 is:
    DriverManager.registerDriver ( new oracle.jdbc.driver.OracleDriver());
    This all worked prior to the upgrade of jdk.
    The code at line 23 does work using the command line.
    I did check the ENVIRONMENT VARIABLES - in my limitted knowledge they look OK. But I am sure there MUST be something missing &/or incorrect.
    During execution, the servlet is just not finding "something".
    I am relatively new to JAVA and especially new to servlets.
    What should I look for to solve this problem?
    TIA
    WalkGood

    The oracle drivers are in a file called classes12.zip.
    Make sure that you unzip these files to where the
    servlets can find them.
    %TOMCAT_HOME%\common\classes
    or
    %TOMCAT_HOME%\classes
    or
    %TOMCAT_HOME\webapps\{app name}\WEB-INF\classesIs %TOMCAT_HOME% an environment variable? I have one called CATALINA_HOME. It is set the jakarta folder "C:\jakarta-tomcat-4.0.1"
    Something I noticed: If I execute tomcat "startup.bat" in a command prompt window, I see echo'd messages. One says "Using CLASSPATH: C:\jakarta-tomcat-4.0.1\bin\bootstarp.jar;C:\jakarta-tomcat-4.0.1\lib\tools.jar" but this NOT match the Environment Variable "classpath" which does specify the path to the classes12.zip folder. Should the "catalina.bat" file assemble the classpath to include the same Environment Variable "classpath" in addition to bootstrap.jar and tools.jar?
    Where can I find specific documentation on how to setup the environment for jakarta-tomcat to find the ORACLE drivers during execution of a servlet?
    TIA
    WalkGood

  • Satellite Pro P300 - PSPCDA-01L00D - DVD not found after Windows 7 upgrade

    After performing a clean install of Windows 7 Home Premium, then downloading the necessary drivers from the Toshiba support website there are issues with the DVD player in my laptop.
    I downloaded the Toshiba DVD Player application, which auto detects which version you need. After allowing the application to run, I get the message "No Toshiba DVD installation could be found! You can only update an already installed version."
    How do I get the DVD player to be recognised, so the application will install. Currently the DVD player will not play DVDs - which will be an issue for my daughter who is using the laptop.
    Also, the Windows 7 driver page mentions updates will be available through Toshiba Service Station, but provides no link. A search of the Toshiba website fails to locate it, where do I get this utility from?

    Hello
    I agree with Mike30. As you can see on Toshiba website, its just an update but no full version. Full version of DVD player is only preinstalled on your notebook and included in Toshiba recovery disk.
    But in my opinion you dont need additional DVD player software. Its a little useless but thats my personal opinion
    I prefer the allround tool VLC media player because it can play all known audio and video files. Its small and freeware player and I can recommend it.
    Have a look on VLC media player page:
    http://www.videolan.org/vlc/

  • Lightroom 6 not found on pc after upgrade?

    Installed Lr6 yesterday using creative cloud app.
    Today cannot find LR6 ?
    The app says it was updated ?

    I started a chat session and they had me sign out of the CC app
    Sign back in to the CC app and then clicked on the Lightroom CC app and the application started with a catalog upgrade for LR6 and then LR6 came up.
    He said this is a NEW process in the LR upgrade.
    They should let people know when the install process is modified so they don't think that something went wrong.
    GFS

  • Com.sapportals.portal.pcd.* not found!

    I am new to SAP Portals Development. I have SAP Netweaver 7.0.08 installed on my machine. While trying to create a sample portal project i tried to create a JSPDyn component. The .java and .jsp files are auto-created.
    The problem is that the code doesnt compile. Any package starting with com.sapportals is not found by the tool. This is strange as the code itself is auto generated and the packages missing are the basic requirement for any portal application. Can ne1 tell me where can i find the jar files for these packages?
    PS:
    Not found :
    com.sapportals.portal.pcd.*; com.sapportals.portal.prt.service.pcdmanager.IPCDManager;
    com.sapportals.htmlb.*;
    com.sapportals.htmlb.enum.*;
    com.sapportals.htmlb.event.*;
    com.sapportals.htmlb.page.*;
    com.sapportals.portal.htmlb.page.*;

    Hi,
    You can find here
    C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal
    or
    You can download JAR from this link and install it.
    <a href="http://www.alphaworks.ibm.com/tech/jarclassfinder/download">JAR files</a>
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2951
    Regards,
    Senthil K.

  • Customizing EP Logon Page fails with iView not found

    Hello,
    I'm trying to customize my EP logon page following the instructions in  the next web pages to modify all the related files:
    http://help.sap.com/saphelp_nw70/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    But after restarting the portal and I visit the logon page, I get the following error in the browser:
    ======
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 07:57_31/01/08_15713950
    See the details for the exception ID in the log file.
    ======
    And in the defaultTrace file appears the error below:
    ======
    #1.5^H#76A0F9DFAA42007500000019000CA08C00044508DB1EB86A#1201804245120#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal
    #Guest#0####a2aef0d0d02a11dcbf2076a0f9dfaa42#SAPEngine_Application_Thread[impl:3]_25##0#0#Error#1#/System/Server#Java###An er
    ror occured during authscheme computation.
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: iView not found: com.ics.portal.runtime.logon.certlogon
            at com.sapportals.portal.prt.deployment.DeploymentManager.getPropertyContentProvider(DeploymentManager.java:1937)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:222)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
            at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.getLogonIView(AuthenticationService.
    java:233)
            at com.sapportals.portal.prt.service.hook.SecurityHookService.doNodeHook(SecurityHookService.java:154)
            at com.sapportals.portal.prt.connection.PortalHook.doNodeHook(PortalHook.java:469)
            at com.sapportals.portal.prt.pom.factory.ComponentNodeFactory.newInstance(ComponentNodeFactory.java:138)
            at com.sapportals.portal.prt.pom.factory.ComponentNodeFactory.newInstance(ComponentNodeFactory.java:50)
            at com.sapportals.portal.prt.pom.PortalNode.createComponentNode(PortalNode.java:275)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:617)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
            at java.security.AccessController.doPrivileged1(Native Method)
            at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
            at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessio
    nMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged1(Native Method)
            at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    ======
    Does anybody has a clue?
    Thanks in advance.
    Roger Allué i Vall.

    Hi Xavier,
    I would recomend you to do these steps.
    1. Import the Par inside NWDS ( Make sure u have the Jars inside the Lib).
    2. Do the modification.
    3. try to Deploy using some different name.
    4. Check the deployed using portalapp.xml ( defualt component).
    5.Now if it looks fine you can proceed ahead by changing the autheschemes.xml
    Refer to this blog
    Modifying The Logon Par(or customising the Logon Screen)
    Thanks
    Pankaj

  • "UWL_GET_ITEMS_PROXY" not found

    Hi all,
    I have some dumps on a SRM 4.00 system (SAP_BASIS 640 SP16) with the following error message: "UWL_GET_ITEMS_PROXY" not found.
    A portal with an UWL iView is connected to the SRM system. Everything works fine from the Portal and UWL, but on SRM I have a lot of dumps. The portal UWL is also connected to an ECC6 system, and we have no problem on it.
    The function module UWL_GET_ITEMS_PROXY is part of the function group UWLCONN, in the SUWL package. But on the SRM system, the UWLCONN function group does not exist. Does anyone know why? Is it due to the version of SRM? How can I do to avoid the dumps?
    Thanks and best regards,
    Greg

    Hello Gregory,
    If you did not find any OSS notes regarding your dump, i advise you to raise an OSS message to SAP.
    Regards.
    Laurent.

  • Why does iTunes say "Disc burner or software not found"

    When I try to burn a CD using my internal CD/DVD combo drive, I get a message that says "Disc burner or software not found". I just upgraded to iTunes 6.0.1. The local Mac store couldn't get iTunes in 2 G5s and a G4 Powerbook to recognize the disc buners either, and they just upgraded to 6.0.1 too. Is this a bug?? Anyone else having problems??
    Greg
    G4 400 Sawtooth / 5 years old   Mac OS X (10.3.9)   CD/DVD combo drive

    Greg, did the "Patchburn" really work for you?
    I had the same problem today. I have a smart playlist made up of: Kind>is>Protected AAC audio file. This smart play list allows me to keep track of music I've downloaded from the iTMS after inadvertently deleting the Purchased Music default playlist. Yes, I know a new “Purchased Music” playlist is created when you buy music again, but it doesn’t contain any of the songs you’ve already downloaded.
    When I went to burn this playlist (several hundred songs) to multiple audio CD format - I go the same result you got.
    "After asking to burn a play list it asks to insert CD, checks the media, checks the play list and then stops with the apple icon reappearing and NO error message."
    Apple tech support couldn’t help me - I found that out the hard way - after 1.5 hours on the phone. No, I haven't exceeded the 7 time burn limit either.
    I tried selecting all the songs in the smart playlist and creating a new [regular] playlist and tried to burn from that, but got the same result.
    Finally, I tried typing "Protected AAC audio file" from my main library in the search window, selected all the songs that resulted, created a new [regular] playlist from that selection and the burn was successful.
    It was a real pain and took almost 3 hours to figure out, but it worked. I'm going to try the "Patchburn" download talked about earlier, but don't know if that's the real problem.
    Yes, I have upgraded my SuperDrive, but iTunes recognizes it - Preferences>Advanced>Burning - if your drive shows up here then that's not the problem. Besides, I had the same problem when trying to burn to the original SuperDrive too.
    I think the problem may be deeper inside iTunes itself. Duh! Maybe something with Apple tightening their DRM scheme which may make us unwitting beta testers to see if they tightened the noose too tight or not. Just a guess.
    Any thoughts, anyone?
    Power Mac G4 MDD   Mac OS X (10.4.3)  

Maybe you are looking for