JPY is not allowed as a payment currency for payment method 1

Hi
While doing a payment run in F110 i am getting an error JPY is not allowed as a payment currency for payment method 1 where every thing is correct "error message that payment not
possible "
Laxmi

Hi
Go to FBZP --> Payment Method in Country --> Select your Country and Payment Method --> Click on "Currencies Allowed" tab on the left --> Check if JPY is added there.
Also, perform the below checks:
FBZP --> Bank Determination --> Select your commpany code -->
1. Select Ranking Order tab on the left --> Check if the combination of Payment method, Currency, Rank Order & House Bank is maintained.
2. Select Bak Accounts tab on the left --> Check if the combination of House Bank, Payment method, Currency, Account ID & Bank Subaccount is maintained.
3. Select Available amounts tab on the left --> Check if the combination of House Bank, Account ID, Currency and Available Amount is maintained.
Let me know if you have more queries.
Regards
Srini

Similar Messages

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

Iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

iphone ios 7 not allowing pics to be scaled for wallpaper. Pls help, have tried switching off Paralax.

Thank you for such a quick response. Most of the things brought out in the article I had already done, but there were some others that I would not have thought of. Thank you again for directing me to this site. I will have to see now if this will increase the battery life any.
MaggieIB

Payment Advice for Payment method T- Transfer

Hi,
When I run F110 (Automatic payment program), I need to provide the payment advice for payment method T (bank transfer)
to the vendor in the format provided by the client.
My question is:
1. Where to assign the payment advice form in customisation for payment method T
2. which program has to be assigned to the payment advice form.
Very Important note: Here we are ALSO using DMEE file to upload- Under payment method country -I have configure the same for use payment medium workbench
Rgds,
Vidhya

Hi Vidhya,
All this is done in a single screen transaction code FBZP.
Where to assign the payment advice form in customisation for payment method T
This is in Payment methods in Company codeSelect your payment method-Expand form data and assign the paymnet advice form.
which program has to be assigned to the payment advice form.
FPAYM_INT_DMEE(For DMEE)./ in the next form you may have F110_IN_AVIS.
Thanks
Aravind

Payment Block for Payment Terms

Please let me know the steps to activate payment block for payment terms
while posting the doucments through MIRO.
Thank you
Ravi

Hi Ravi
while defining the payment terms you can give the payment block.
TCODE-OBB8
Beside to the block key you have one check box available - if you select that, then system populate the payment block only when you change the payment terms in the line item.
But, as you are asking directly with payment terms so you give the payment block in OBB8 without selecting the check box beside to that field
VVR

Printing of Payment advice for Payments done by TT(Bank Transfers)

Hi
Any standard Tcode available for taking print of Payment Advice for payments made through bank transfers like TT to our vendors. Kindly share
as we have std Tcode FBZ5 for printing of payment advice for payments done through Checks
thanks & regards
salva bindu

Hi Bindu,
You can print the payment advices by selecting the Print immeidately in the variant we give in F110-prinout/medium tab.
In that variant, you give printer name and check print immediately.
~Thanks!
Rajesh

Vendor payment allowed although vendor is blocked for payment

Hi
While booking invoice through MIRO, System automatically blocks the vendor line item in case variance exceeds the tolerance limit. The system enters an R in the field Payment block so that Financial Accounting cannot make payment for the invoice.
But when I am making payment through F-53, It is not restricting me to pay the vendor.
What are the settings required for restricting the payment?

Hello,
Payment block in vendor master will not restrict if you do F-53.
This is only being restricted when you make payment through automatic payment program F110.
Regards,
Ravi

F110 - Payment program for payment method 'W'

I'm trying to implement wire payments (using EDI). When I run F110 I choose 'W' as the payment method on the parameters tab, and on the printout/data medium tab I expect to see program RFFOUS_T - instead I'm seeing RFFOUS_C. Isn't RFFOUS_T the program that should run for wires? I also am seeing RFFOAVIS and RFFOEDI1. Should these programs be running, as well?

Hi
In FBZP did you do all the steps for payment method W
1.setup payment method per country for payment transactions
2.setup payment method per company code for payment transactions
3.setup all company codes for payment transactions
4.setup paying company codes for payment transactions
5.setup bank determination for payment transactions.
the error you are getting is No valid payment method found , not with the bank account number , g/l account and so on......
Try removing the payment method either in the Vendor Master or in the Document and run F110.
Regards
Venkat

Payment Run for 1 method but different currencies.

Hi All,
We have a requirement where we have 1 House bank, 2 Bank accounts in that House bank (EUR, SGD) therefore 2 Account ID's, 2 Seperate cheque lots, but we have 1 payment method for Cheques. The required FBZP configuration has been done. We also have created 2 Payment variants (1 for EUR & other for SGD).
Now the issue is, how to run payment program using one proposal for 2 bank accounts? I mean, as we have 2 seperate cheque lots and 2 different bank accounts but one payment method and 1 proposal whcih is considering all the vendors with the open items, So how to Run the payment program which picks their respective cheque lots.
Thanks in advance,
Pallavi

Perhaps more details will be helpful:
In configuration of outgoing payments, you have to configure house bank selection so that you pick the same bank for the payment method and each currency.
Then you have to make sure that you configure the bank / payment method / currency combination to the correct accounts.
You have to maintain check lots for each account.
You have to maintain two variants for your checks: one for each currency. The variant must include house bank, account, payment method.
You maintain both variants in the same line for the program in F110.
Then when the payment program runs, each invoice will be paid by the correct house bank account based on your configuration for bank and account selection. When you do the printing, each variant should run separately, picking out the items based on their currency and house bank account.
This is basically the information in previous replies, with a bit more detail.
Good luck,
- Jeff

SANE does not allow c++ external backend ( epkowa for epson V200)

Some Epson scanners ( Perfection V100, V200, etcc ) need an external library and the corresponding firmware from epson site ( package iscan and iscan-plugin ).
On gentoo, debian based and rpm based distrib, sane is compiled to allow such things
Stock sane from sane.org and arch does not seem to link with the c++ backend epkowa provided by epson
xsane work fine but scanimage -L not ( scanimage is necessary for scripting )
To use an epson external firmware based scanner , one have to compile sane by hand
and modify frontend/Makefile
LINK = $(CC) [...] need to be replaced by LINK = g++ [ ... ]
Lost several hours to figure out where was the prb, cause the epkowa sane backend used to work out of the box on other distrib

I "SOLVED"
I replaced the original "epson", "epson2" and "epkowa" drivers with the drivers installed on a notebook with Fedora16 (and sane 1.0.23), and now epkowa profile works good with all resolutions!
You can download Fedora16 epson drivers here.
$ ls -l /usr/lib/sane|grep epson
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1
-rwxr-xr-x 1 pippo pippo 179760 10 set 2012 libsane-epson2.so.1.0.23
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1
-rwxr-xr-x 1 pippo pippo 122080 10 set 2012 libsane-epson.so.1.0.23
$ ls -l /usr/lib/sane|grep epkowa
-rwxr-xr-x 1 pippo pippo 889 9 dic 11.12 libsane-epkowa.la
lrwxrwxrwx 1 root root 24 1 giu 18.34 libsane-epkowa.so -> libsane-epkowa.so.1.0.15
-rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1
-rwxr-xr-x 1 pippo pippo 620651 9 dic 11.12 libsane-epkowa.so.1.0.15
Last edited by quellen (2014-06-05 11:57:25)

IPhoto 11: Will not allow me to select photos for upload

Hello my knowledgeable compadres. I have installed iLife 11 and am running Snow Leopard 10.6.6 on a MacBookPro. I have had no problems with iPhoto 09 but since I've upgraded to the latest version, I am unable to select photos to upload to email, facebook, web pages or anywhere else. Interesting variation is that some photos are selectable; others are not. They are all jpg format so I am at a loss. I can't select photos from within iPhoto to edit; I can't click and select photos from the photos icon in the finder; I can't select any photos from the dialogue between Facebook & iPhoto and it's driving me crazy. I've had my Mac since 2008.Does anyone have any ideas? Thanks! Bernardine

when I attempt to select the photo from the preview pane in iphoto, it either is inert or, allows me to select it but the photo goes to black with a grey alert symbol on it and disappears in either a close up view or edit window.
The exclamation point - ! - turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. Your problem isn't selecting files, its that iPhoto can't find the file you've selected.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Is anyone else having problems with Candy Crush Saga blinking out and not allowing you to ask friends for help in moving to another level in the game? If so, how do I fix it"

I have been playing Candy Crush Saga for a long time, all of a sudden it is blanking out when I ask friends for help to the next level. What can I do to remedy this?

Hello Pepper 46,
It sounds like an app you installed is not functioning correctly. I recommend starting with these steps from the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
There is additional troubleshooting in the article if this doesn't resolve it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Not allowed to buy TV model for the advertised price

My current TV stopped working and I found on BestBuy.com a Samsung 55" 1080p Smart 3D model that asked for my name and email before I could receive a price. Once doing so I was told the 55" was no longer available, so I tried the 60" and was quoted $1104.99 (SKU:4327014). I decided to stop by my local store (New Hope Commons, Durham, NC) who said they were out of stock for that SKU and didn't have a like comparison for under $1,200.
Before leaving the store, I decided to purchase what I had in my online cart from my phone. Checkout would not complete the order stating item not available for shipping to your store. So I tried a different store and tried shipping to my home address. I could not find a store in my state, that it would ship. So I called the customer service number and was told that model is no longer available in my region. Even though the site asked for my information before I continued to check out and had some basis for inventory since it knew that the 55" I originally wanted, was not available.
While the customer service rep was looking up similar models for an alternative, I walked passed a Samsung 55" 1080p Smart 3D on the wall as a display unit being sold as an open item for $1439 (SKU:4323036). During the "negotiation" over the next 30 min, with me attempting to have Best Buy honor something close to it's advertised price. The instore representatives (professional and courteaous) would only reduce the open box item to $1263 (No accessories, I would still have to purchase 3D glasses). Even though the same piece of paper was advertising the 46" and 60" of the same model NEW for $1,199 (They are just not available). My apoligies I didn't catch the SKU of the 60" version on the instore ad, though I did get a picture of it.
So, you have the TV I want in my local store, but want to charge me more than the next size up for the current sale? The 60" shows as available online, but the phone representative stated Best Buy was not willing to ship it from "a warehouse in a different region".

Hello dp0akley-
When searching for my last TV, I did a lot of comparisons around picture quality, size and definitely pricing, so I can understand your frustration at finding the TV you wanted, but not at a price you would have liked.
There are occasions where a promotion with the manufacturer or the pricing from the manufacturer may cause a larger size TV to be cheaper than smaller TV’s. In those situations, we are not able to lower the price of a smaller TV to match that of a larger TV. In general, open box pricing is not negotiable and is set, so hearing that the store was willing to work with you to find a good price is nice to hear. The open box TV you listed is not available on BestBuy.com, so it wouldn’t have been the same price as the one you saw on BestBuy.com.
BestBuy.com represents the entire US, so depending on the product, it may not be available everywhere. In this case, the 60” TV you were looking at is a discontinued model, so would most likely explain the lack of availability in your area. We do not ship TV’s of this size from store to store unless the stores share a common warehouse.
It sounds like in this case, of the TV’s you are interested in; your best bet may be the open box one the Durham store has available.
I apologize for any disappointment that this may cause you.
Sincerely,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Using Windows 7, Firefox does not allow a script to work for an online counter that worked fine on Xp. It works fine in IE with Windows 7.

On several websites, there is an online counter that shows the count, but now that I have Windows 7 it doesn't show the count. IE shows it but not Firefox. It worked fine in XP.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Images_or_animations_do_not_load

I guess Chrome will not allow me to sign up for Mozilla newsletters after I downloaded FF, unable to get page to accept my email, etc.

Been having trouble w/Chrome would play audio only of Vimeo videos, fixed that but now will not display photos on Pinterest, only the links behind them. So I thought I'd try Firefox again, used to use it for several years. Downloaded and then thought I should sign up for your newsletters. But (using Chrome right now) I could not get the page to accept my subscription. Tried several times, refreshed, etc. Not sure why, seems strange.

I'm sorry cor-el. I have not yet installed Firefox, life is way too busy just now. 24/7 caregiving is taking its toll :( I will install soon.
I guess with my post here my intent was mainly letting you folks know that apparently there is a bug on that newsletter page when it is viewed in Chrome. I could not find any way to report this issue unless I came here so I gave the whole story when I did. I am pretty sure once I install Firefox, I will be able to use that page to sign up for the newsletters, thinking it must be Chrome. Of course, I could be wrong, we'll see when I get to it. Thank you for your patience

JPY is not allowed as a payment currency for payment method 1

Similar Messages

Maybe you are looking for