Jquery related error after Apex 4 upgrade

Hi,
We have upgraded Apex 3.2.1 to Apex 4.0.2 but when run the application it gives Jquery related errors. for example Object doesnt support this method or propert.
I have replaced the older jquery library with Apex 4 jquery-1.4.2.min.js file then the application runs fine. but the APEX 4 functionality is not running.
Can you please help to avoid jquery related error?
Regards,
Faheem Raza

I've executed @apexins SYSAUX SYSAUX TEMP /i/ not apxrtins.
Below is the apex_epg_config.sql /tmp output.
SQL> @apex_epg_config.sql /tmp
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as '/tmp/apex/images'
Directory created.
old 47: if '&IMGUPG' != '' then
new 47: if '' != '' then
old 48: l_mv_folder := '&IMGUPG';
new 48: l_mv_folder := '';
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:02:28.69
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.
SQL>

Similar Messages

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

[SOLVED] Getting theme errors after a recent upgrade in gtk3 apps

I have recently started getting errors like these after a recent upgrade.
(nautilus:12329): Gtk-WARNING **: Theme parsing error: *-*:*:*: Not using units is deprecated. Assuming 'px'.
Full error while opening nautilus can be see here. http://sprunge.us/IQOM
Relevant pacman log: http://sprunge.us/YYgY
~/.config/gtk-3.0/settings.ini : http://sprunge.us/VJMT
I have tried few themes (Fear, Hope, Aldabra), all seem to give me this error. Also, theme Fear broke (gave white text with white background) after the upgrade.
Can anyone else reproduce this error?
If there is any theme that doesn't have problems with updated system, please share.
Last edited by shadyabhi (2012-04-28 02:41:54)

shadyabhi wrote:Can anyone else reproduce this error?
Apparently yes:
https://bbs.archlinux.org/viewtopic.php?id=140402
https://bbs.archlinux.org/viewtopic.php?id=140277
There are a couple other threads as well - some have alleged solutions, or at least some themes that work.

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

Workflow errors after service pack upgrade

Hi all,
We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
What could be the reason for this ?
'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
Thanks in advance

Getting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
Error while calling '
call function 'RH_GET_WFD_ID' destination 'NONE''
But RFC destinations are working fine.

I ran into the follow error after trying to upgrade to the newest version of ITunes. "An application has made an attempt to load C runtime library incorrectly" I was direct to "Contact the applications support team for more information" Can any one help

I ran into a problem with iTunes after I upgraded to the latest IOS. I'm recieving the followig error messages, any help would be appriciated.
Microsoft Visual C++ Runtime Library
Runtime Error!
Programe C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.

Hello mobleymarvin,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

NI-DMM Error after Labview7.1 upgrade

I have upgrade my software to Labview 7.1 and now I have big problems with the control of NI-DMM 4060.See attached file. First time I can control my DMM, but after that I got problems with the external code called by a Call Library Node. What can I do to solve this problem. I have tried to reinstall Labview without success
Attachments:
errors.doc ‏35 KB

Hey scientist,
Are you using anything related to GPIB/Serial? You posted the question talking about the NI-488 error, but really I think the error you are receiving is more pertinent to the LabVIEW: File not found error. Errors in LabVIEW generally have two possible causes - one is what the error means if LabVIEW caused it, the other is what it means if it was related to the NI-488.2 driver.
So you get a file not found error anytime you try and open any (????) file in LabVIEW 6.1? Does that mean when you try and open a VI in 6.1, or when you use a File I/O VI inside of a 6.1 VI? Can you open that same file up using LabVIEW 7.0 and 7.1? What is the type of file that you are trying to open, and where is it located?
JaredA

Startup open ORA_12514 error after Shutdown, just upgraded 9i to 10g

Hi,
Noobe here, again! Cheers and happy New Year to all!
How should I edit script to start db that has been shutdown prior to backup?
We are having a problem with backups, failure is occurring executing SQL*Plus startup after shutdown. I successfully upgraded our 9i to 10g, 10.2.0.5.0 on Windows server 2003, 32-bit. We have a back_script.bat that runs all this, the only edits that I had to make within this were the names for the new Oracle services, but that is not a problem. When I run through the actions in the batch file, it fails at the sql>startup open; action, throws the error "ORA-12514 TNS:listener does not currently nkow of service requested in connect descriptor" What is different here between 9i and 10g that now this doesn't work? By commenting out the line calling our oracle_stop_start.sql I am getting successful >exp dumps, but there could be processes running 'cause I'm not stopping everything before proceeding with the export.
I have a complete image of the physical server running in a virtual that I am able to test on. Hopefully I'll not put too much info in here, but here is some background! Both the batch file and little stop_start script predate my involvement.
Here are the pertinent statements in our backup_script.bat:
SET NLS_LANG=AMERICAN_AMERICA.UTF8
SET ORACLE_SID=wind
net stop Windchill3_MethodServer (the third party application that uses the database wind)
sqlplus "system/manager@wind as sysdba" @D:\ptc\windchill\backups\oracle_stop_start
exp system/manager@wind owner=guest file=......\oracle_backup.dmp.....etc, etc, etc
Here is oracle_stop_start.sql
shutdown immediate;
startup open;
quit
As stated earlier, this has worked at least since 2007 when the last edits were made to the batch file. Now it fails at the sql>startup open; throwing the error ORA-12514. I can duplicate this executing each statement in a dos shell. The shutdown command closes, dismounts and shuts down the database. I have tried changing the startup statement to sql>STARTUP OPEN wind; but that makes no difference. I have found that if I exit sql*plus and log back in /nolog (in the same shell window) then I can restart the instance, what I do is:
sqlplus /nologsql>connect sys/* as sysdba;
sql>startup open wind;
This does successfully start the Oracle instance, mount and open the database. How else might I do this? I can certainly duplicate these actions, adding the necessary lines to oracle_start_stop.sql, but is there a better & cleaner way to do this? Right now I just want to make these existing scripts work. Once that is done, then I'm going to investigate and learn more about RMAN and datapump export/import and update our backup procedures.
Any thoughts & suggestions?
Thank you,
Tom

It might be a difference in behaviour between 9i and 10g. It looks like you are connecting through sql*net (sqlplus "system/manager@wind as sysdba), so the ORACLE_SID setting is not part of your connection. When the database is shutdown you are no longer connected to any database. When you issue the startup command the ORACLE_SID is not set so there is no service specified.
If you are running this on the database server, try setting the ORACLE_SID then running your script like:
{code}sqlplus "system/manager as sysdba" @D:\ptc\windchill\backups\oracle_stop_start{code}
and you should still have the service set for your connection.
John

Facetime Internal Error after Mountain Lion Upgrade

After upgrading to mountain lion on my mid 2011 imac I am recieving a facetime internal error. I tried the shutdown shift control option sequence and that fixed it for a few days but now the problem is back. Any suggestions on how to fix this would be appreciated.
Thanks

solved

Backup error after kernel patch upgrade

Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.

Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch

Quicken 2006 error after Snow Leopard upgrade

After I upgraded to Snow Leopard, when downloading transactions into my Quicken 2006 I get an OL-249 error. I researched it and it pointed me toward installing Rosetta. I did that, rebooted, and still get the exact same error.
Has anyone else had this problem? Any fixes?
How can I verify that Rosetta installed correctly?
Thank you.

I had the same trouble. Don't know if this actually fixed it, but Quicken has a way to update the security certificates. See "What if I'm getting an OL-249 error when downloading my transactions in Quicken for Mac?" Updated: 09/10/2009 Answer ID: 7368"
Here is the link: https://quicken.custhelp.com/cgi-bin/quicken.cfg/php/enduser/stdadp.php?p_faqid=7368&p_created=1244576101&p_sid=&p_accessibility=&p_redirect=&p_ lva=7368&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9Niw2JnBfcH JvZHM9JnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1jZXJ0aWZpY2F0ZS B1cGRhdGVy&p_li=&ptopview=1

Error after service pack upgrade

Hi,
Recently I upgraded solution manager system to SP13 from SP10 . After the upgrade I am not able to create message through notif_create transaction . The error message is
No, or insufficient, authorization for authorization object "B_NOTIF_IB"
I have SAP_ALL and SAP_NEW profile in my user .
Also I am not able to create message through
Help--> create support message , it is showing message is incomplete . But I am able to send message from satellite system to solution manager .
Pl suggest
Pl suggest
Thanks
Ajeesh
Edited by: Ajeesh S on Dec 18, 2007 8:20 AM

Dear ,
What entries shuld ne in table
thanks

Ms Outlook Integration Error after Sap B1 upgrade

Hi experts,
We are facing a issue after upgrading SAP B1 8.82 to SAP B1 9.0 with Outlook Integration (MS Outlook 2010), we try to logon to SAP B1 from Ms Outlook, we type server name, db user and db password, when why try to choose database we are getting an error "Unable to recover companies list from "Server Name" to Sap Business One", when we press logon button in the same logon window we are getting an error "'Database Name' is not a valid company database".
Has anyone faced the same issue?
Thank you in advance.
Kind Regards,
Vasilis Korolis

The issue has been solved by updating DI API which was still on the previus version.
Kind Regards,
Vasilis Korolis

Sales Order 'Payment Terms' conversion error after 8.8 Upgrade

Hello All,
We recently upgraded from 2007A PL49 to 8.8.
The Installation went smooth, until we opened up our first new Sales Order. We are getting the SQL error listed below each time we open up the sales order module. This doesnt prevent us from adding a new Sales Order, but the fact that it throws the error each time we open the module is scary.
Any ideas as to what might have changed from PL49 to cause this?
Error:
1). [Microsoft][SQL Native Client][SQL Server]Error converting data type nvarchar to numeric.
'Payment Terms' (OCTG)
Thanks,
Matt

Hi,
Can you check wether there is any formatted search involved in the Sales Order?
You can also check Note No. : 1402855. Check if it helps.
Kind Regards,
Jitin
SAP Business One Forum Team

2007 iMac disk error after mountain lion upgrade

My mid year 2007 iMac was able to download ML install program, but while installing ML I got a disk error message. I was upgrading from Lion. I am still able to get to my Windows partition and boot it up without any issues.

solved

Jquery related error after Apex 4 upgrade

Similar Messages

Maybe you are looking for