JRA Start Session
Hello,
I've tried JRA connectivity with a single SAP and I managed it to work.
However, It's not clear to me how can I choose, in a JRA Start Session action block, the connection parameters to the server (server name, instance, username, password, ecc.). I think it uses what I have specified in the JRA definition on Netweaver, during the RAR deployment.
So when I deploy the JRA adapter I can specify connection settings, but when I use the JRA Start Session action I don't have the possibility to recall them. So if I N have multiple connections to different SAP systems via JRA, should I have to deploy N resource adapters with different settings? And how to choose the corrent configuration in the Start Session Action Block?
I hope to have been clear...
thank for your help
Mauro
The connection properties are defined within the visual administrator. It's under the server - services - connector container. Under your connector you should have eis/SAPJRAFactory, you can clone this and then set the properties under managed connection factory to the needed server.
Jamie
Similar Messages
-
SAP JRA Start Session Dynamic Connection
Hi, I have several JRA connections correctly configured on on SAP Mii. I now need to be able the connection dynamically on SAP JRA Start Session based on a user specified value.
The only property available on the SAP JRA Start Session action block is the FactoryName ([this seems to be the default case on vesrions 12.1 or later|http://forums.sdn.sap.com/thread.jspa?threadID=2146888]). When I try to pass a value to the property FactoryName, the connection goes through as successful no matter what the input is (even if it is an incorrect value).
How will I be able to dynamically specify which connection it should use?
Using SAP Mii Version 12.1.7 build(50).
Thank you.Hi
If you are checking the staus of the Start Session action to see if it connected successfully or not then you will always see success as the actual connection only happens during the JRA Function Call action.
So you will need to check the status of the Function call that follows the Start Session.
Regards
Partha -
Work process re-started , session terminated
Hi Gurus,
While i creating a purchase order (me21n) , the process runs for a while and then i am getting a SAP GUI message "Work process re - started , session terminated" and the session is closed.Can anyone give me the cause of the problem and solution for the same.
Developers Trace File Entry:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:09:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 1680
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:09:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C C Fri Aug 31 16:09:41 2007
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 160937 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I I Fri Aug 31 16:09:53 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C C Fri Aug 31 16:09:54 2007
C Using Provider SQLNCLI
C The IRow interface is supported by this OLEDB provider
S S Fri Aug 31 16:09:55 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EFFBD0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DF30098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DF302C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A A Fri Aug 31 16:09:56 2007
A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
B B Fri Aug 31 16:10:05 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
I I Fri Aug 31 16:10:10 2007
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_01@< appears or changes (state 1)
E E Fri Aug 31 16:10:11 2007
E Replication is disabled
N N Fri Aug 31 16:10:28 2007
N login/password_change_for_SSO : 1 -> 1
B B Fri Aug 31 16:10:38 2007
B table logging switched off for all clients
B B Fri Aug 31 16:10:41 2007
B dbmyclu : info : my major identification is 3232245831, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 96AAC2654435DC46AFA4C31629BE366F.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
S S Fri Aug 31 16:15:55 2007
S found spool memory service RSPO-ACTIONS at 1DF34B50
M M Fri Aug 31 16:20:14 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1680)
When : 8/31/2007 16:20:14.837
Threads : 2
Computer Name : IDES
User Name : SAPServiceI04
Number of Processors: 2
Processor Type: x86 Family 15 Model 6 Stepping 4
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 9cc
eax=00000000 ebx=00000000 ecx=00000014 edx=00000000 esi=003860ec edi=003860c0
eip=7c82ed54 esp=0300daa8 ebp=0300dab8 iopl=0 nv up ei pl nz ac pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000212
function : MmxFree2
00f35dde 2b0568e59701 sub eax,[MmxUheaderSz (0197e568)] ds:0197e568=00000010
00f35de4 50 push eax
00f35de5 68dd000000 push 0xdd
00f35dea ffb4246c010000 push dword ptr [esp+0x16c] ss:0300dc14=7c82f9dd
00f35df1 e890ac1200 call memset (01060a86)
00f35df6 83c40c add esp,0xc
00f35df9 8b4308 mov eax,[ebx+0x8] ds:0300d006=2bf38b08
00f35dfc 8bf3 mov esi,ebx
00f35dfe 2b730c sub esi,[ebx+0xc] ds:0300d006=2444890c
00f35e01 89442418 mov [esp+0x18],eax ss:0601aaaf=00000000
FAULT-> 00f35e05 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e08 7513 jnz MmxFree2+0x4cf (00f35e1d)
00f35e0a 8bce mov ecx,esi
00f35e0c e814a7ffff call MmxIBlockRemove (00f30525)
00f35e11 8b4308 mov eax,[ebx+0x8] ds:0300d006=08460108
00f35e14 014608 add [esi+0x8],eax ds:033930f2=00000000
00f35e17 89742414 mov [esp+0x14],esi ss:0601aaaf=00000000
00f35e1b 8bde mov ebx,esi
00f35e1d 8b7308 mov esi,[ebx+0x8] ds:0300d006=f6f30308
00f35e20 03f3 add esi,ebx
00f35e22 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e25 750d jnz MmxFree2+0x4e6 (00f35e34)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0300e648 00746014 3cc00548 3d07d010 06751220 00000000 disp+work!MmxFree2 [mmxx.c (2440)]
0300e668 006450a7 00000000 00000001 3cc88e78 3cc485e8 disp+work!ab_sqlsclose [absapsql.c (8104)]
0300e690 006466c6 00000013 00750af1 00000000 000000cd disp+work!ab_popbst [abstacks.c (4763)]
0300e698 00750af1 00000000 000000cd 00000000 01c720fa disp+work!ab_poprsql [abstacks.c (1167)]
0300e6cc 006e0f51 00000000 3d170778 00000000 00f00105 disp+work!ab_jsqls [absapsql.c (1306)]
0300e770 00766be4 3d1715b3 3d170778 00000000 01afb3a4 disp+work!ab_extri [abextri.c (431)]
0300e784 007ebf1c 00000000 7c36a42b 000004b6 00571b1a disp+work!ab_xevent [abrunt1.c (261)]
0300e794 00571b1a 3d171080 0000002e 3d170778 3d17139a disp+work!ab_dstep [abdynpro.c (460)]
0300e7bc 005740de 3d170778 3d170778 7c36a42b 00000000 disp+work!dynpmcal [dymainstp.c (2312)]
0300e7d4 00573680 3d17139a 3d170778 00000003 0300fdcc disp+work!dynppai0 [dymainstp.c (1043)]
0300e7f0 00549340 3d170778 00000002 00000001 00000000 disp+work!dynprctl [dymainstp.c (350)]
0300fdcc 004747f4 00000002 0300fe74 00000001 00497626 disp+work!dynpen00 [dymain.c (1375)]
0300fddc 00497626 00000002 00000000 003860a8 00000002 disp+work!Thdynpen00 [thxxhead.c (4353)]
0300feec 004979e0 00000001 7ffd4000 00000000 00000000 disp+work!TskhLoop [thxxhead.c (4117)]
0300ff04 00421d07 00000000 00000000 0300ff60 00401059 disp+work!tskhstart [thxxhead.c (1038)]
0300ff14 00401059 00000003 003860a8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1009)]
0300ff60 01060bcf 00000003 003860a8 003828f8 0152d000 disp+work!main [thxxanf.c (58)]
0300ffc0 77e523e5 00000000 00000000 7ffd4000 80a56be3 disp+work!mainCRTStartup [crtexe.c (398)]
0300fff0 00000000 01060a8c 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id d2c
eax=0000005e ebx=00000103 ecx=00000010 edx=000719bb esi=00000000 edi=00000000
eip=7c82ed54 esp=04a1feb0 ebp=04a1fef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:04a1feb0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:07a2ceb7=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
04a1fef4 00fc37ec 000006ac 00000000 00000000 0038cd48 ntdll!KiFastSystemCallRet
04a1ff84 7c349565 00000000 00000000 00000000 0038cbd0 disp+work!SigIMsgFunc [signt.c (559)]
04a1ffb8 77e6608b 0038cbd0 00000000 00000000 0038cbd0 MSVCR71!endthreadex
04a1ffec 00000000 7c3494f6 0038cbd0 00000000 00000000 kernel32!GetModuleFileNameA
M -
M M Fri Aug 31 16:20:16 2007
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M M Info for wp 0
M M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 0
M tid = 9
M mode = 0
M len = 787
M rq_id = 423
M rq_source = 1
M last_tid = 9
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M M Adresse Offset Data from input buffer
M -
M 054A7D70 000000 00000000 00000000 01502700 00000000 |.........P'.....|
M 054A7D80 000016 00000000 0000009f 74100623 00170000 |........t..#....|
M 054A7D90 000032 04880131 31363000 77696e64 6f77732d |...1160.windows-|
M 054A7DA0 000048 31323532 00100409 00033731 3010041d |1252......710...|
M 054A7DB0 000064 00013010 040f0004 000012ad 10041900 |..0.............|
M 054A7DC0 000080 02000010 05010016 000d0000 000d002b |...............+|
M 054A7DD0 000096 a1001fa2 00000000 00000000 0000100c |................|
M 054A7DE0 000112 08001000 00029f00 00047400 00029f00 |..........t.....|
M 054A7DF0 000128 00047410 0a010009 00000000 00000000 |..t.............|
M 054A7E00 000144 00100a03 00090100 00000000 78001f10 |............x...|
M 054A7E10 000160 0a030009 03000900 00007800 0a100a03 |..........x.....|
M 054A7E20 000176 00090200 00000300 75000a10 0a030009 |........u.......|
M 054A7E30 000192 01000000 00007500 0a100a05 00090100 |......u.........|
M 054A7E40 000208 00000000 75000910 090e00c8 00c80000 |....u...........|
M 054A7E50 000224 00000075 00090000 23000700 0200000c |...u....#.......|
M 054A7E60 000240 01000000 00002300 82003c00 00000003 |......#...<.....|
M 054A7E70 000256 00070000 00070000 00000000 00000000 |................|
M 054A7E80 000272 00000000 00000000 00020005 00020002 |................|
M 054A7E90 000288 000c0014 00110003 0001000a 000e0005 |................|
M 054A7EA0 000304 00060003 000a000f 000c0008 000a000c |................|
M 054A7EB0 000320 000c0008 00030003 0002000a 0005000a |................|
M 054A7EC0 000336 0005000a 0005000a 00050005 00011100 |................|
M 054A7ED0 000352 11001100 11001100 11001100 11001100 |................|
M 054A7EE0 000368 11001100 11001100 11001100 11001100 |................|
M 054A7EF0 000384 11001100 11001100 11001100 11001100 |................|
M 054A7F00 000400 11001100 11001100 11001100 11001100 |................|
M 054A7F10 000416 11001100 100c0200 18000000 07000000 |................|
M 054A7F20 000432 23000000 07000000 00000000 00000000 |#...............|
M 054A7F30 000448 00100909 00180001 00077920 20202020 |..........y |
M 054A7F40 000464 20202020 20202020 31303030 0000100a | 1000....|
M 054A7F50 000480 01000900 00000000 00000000 100a0300 |................|
M 054A7F60 000496 09010000 00000078 001f100a 03000902 |.......x........|
M -
M M *****************************************************************************
M *
M * LOCATION SAP-Server ides_I04_00 on host ides (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Aug 31 16:20:16 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 3
M *
M *****************************************************************************
M M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was set. rc: 1 BREAK_REQUESTED
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
M ThDelEnqInfo: del enq_own >20070831161118747000000000ides............................</1
M ThDelEnqInfo: act enq info: 1
M ThDelEnqInfo: del enq_own >20070831161118747000010000ides............................</2
M ThDelEnqInfo: act enq info: 0
A TH VERBOSE LEVEL FULL
C Fri Aug 31 16:20:17 2007
C SQLBREAK: BREAK_REQUESTED upgraded to BREAK_IN_PROGRESS sloledb.cpp 4187
M Fri Aug 31 16:20:18 2007
M SosSearchAnchor: search anchor for 4
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThSaveContext: roll out
M ThRollOut: roll out T9/U13/M0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U13 M0 I1 (Level 7) ok
M ThCheckEmMagic: check em magic at 3CC00A80 for T9/M0/I1
M ThCheckEmMagic: em magic at 3CC00A80 for T9/M0/I1 o.k.
M ThEmContextDetach2: detach T9/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE YES YES NO 255 255 20070831 160937 IDES C Rollback Work (0)
B Disconnected from connection 0
B statistics db_con_commit (com_total=149, com_tx=34)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c 357]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:20:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 2460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:20:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C C Fri Aug 31 16:20:38 2007
C Using Provider SQLNCLI
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 162037 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C Using Provider SQLNCLI
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EF7370
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DEF0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DEF02C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ThCheckPrevUser: clean previous user T9/U13/M0
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 0
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M C The IRow interface is supported by this OLEDB provider
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1283]I Got the same problem but at that time i have installed GUI of lower version. WHen i have upgraded the GUI it worked fine. Better you check once the SAPGUI configuration.
-
[SOLVED] - [Gnome 3] GDM error dialog "failed to start session GNOME"
Hi,
Just installed Gnome 3 from testing.
First boot crashed, but that was a missing library for splashy, so removed splash from my grub boot line.
Now the system boots to GDM. I can start my Xfce session without any issues, but if I select Gnome, I get a dialog "Failed to start session GNOME".
Following is my GDM greeter log:
gnome-session[2208]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "/usr/lib/at-spi/at-spi-registryd" (No such file or directory)
(gnome-settings-daemon:2215): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
** (process:2228): DEBUG: Greeter session pid=2228 display=:0 xauthority=/var/run/gdm/auth-for-gdm-RuDxNi/database
gnome-settings-daemon: xcb_io.c:140: dequeue_pending_request: Assertion `req == dpy->xcb->pending_requests' failed.
Failed to play sound: File or data not found
gnome-session[2208]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
(polkit-gnome-authentication-agent-1:2229): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-power-manager:2226): Gdk-WARNING **: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
(gnome-settings-daemon:2234): Gtk-WARNING **: gtk_window_set_wmclass: shouldn't set wmclass after window is realized!
gdm-simple-greeter[2228]: Gtk-WARNING: gtkwidget.c:6778: widget not within a GtkWindow
gdm-simple-greeter[2228]: WARNING: Unable to read from file /etc/arch-release
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
gdm-simple-greeter[2228]: Gdk-WARNING: gdk_xsettings_watch_cb(): Couldn't find window to unwatch
Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1000007 (Login Wind)
Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-settings-daemon:2234): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
All help greatly appreciated.
Cheers.
Last edited by Padfoot (2011-04-08 23:38:59)I just remembered to do that.....
Think I have found my problem.
The Arch Wiki for Gnome 3 has the line for installing to a new system
# pacman -Syu testing/gnome
This installs gnome 3, but does not include gnome-shell or gnome-panel
Just installing them now. Will report back shortly.
Maybe the Wiki should be updated to reflect this, or the package testing/gnome updated to depend on gnome-shell and gnome-panel.
Cheers. -
How i can start session to synchronize my ipod touch 5g in Itunes?
I can't synchronize my ipod touch 5g because when it start synchronizing Itunes tell me that I have to start session of synchronization.
you can't. that' the last OS for that version of iPod. buy a new one
-
System of newly started session does not allow scripting.therefore the sess
Hi,
i am getting an error when i am running the Test script using ECATT is "system of newly started session does not allow scripting.therefore the session cannot be recorded" for recording a transaction
Please let me know the solution asap if you are aware of it.
regards
vishnu>
vishnukvv wrote:
> Hi,
>
> How can i check that whether particular client and front end is allowing ECATT and Scripting in my system.Please answer ,if you know.
>
> regards
> vishnu
Hi Vishnu,
1)Go to RZ11.
Enter Profile name aas SAPGUI/USER_SCRIPTING and the default value should be true.
Current Value should be set to true. -
This needs to be done by BASIS admin team.
2)Request System Admin team to allow eCATT and CATT allowed in this system.
3)In the SAPGUI front end at the menu,you have options to enable scripting.
The first two steps will be done by Basis team and the step(3) can be set by you.
Regards,
SSN. -
Error message from 4i: Locator unable to start session.
I got this message when i attempt to connect to the discoverer viewer. Anyone has any ideas. Please:
Unable to connect to the Oracle Discoverer Application Server. Locator unable to start session "4ivOracleDiscovererSession4"Hi Norm,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
(Repair both Drives)
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
Problems with Folio Builder Pannel. I can´t start session
I´m having trouble with the folio builder pannel, i´m triying to start a new session using my password but i can´t, it says "Error de inicio de sesión [svr.InvalidLogin]", help me please.
ThanksIt sounds like an old password has been captured in the auto-login settings and is preventing you from entering the current, correct password. To remove the captured password, so the following:
1) Quit InDesign and any other CS apps
2) Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager
3) Next delete this file based on version:
/Users/lnegi/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/lnegi/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
4) Then remove this item from the Keychain Access based on version:
Adobe-CS-5-renga
Adobe-CS-5.5-renga
To remove from the keychain:
Navigate to /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click on it and enter your password to unlock it.
Select the “login” item in the Keychains list in the top left.
Select “Passwords” from the category list.
Type “renga” in the search field in the top right.
Select any matches and press the delete key. -
My daughters ipod touch is having an issue. It won't let us activate it. We have had it since last christmas and it is just now having this problem. It says that it has the current ios, but when you power it on it says to activate the ipod. Which it won't let us do wirelessly or hardwired to the itunes. Not sure what is going on, cannot back it up, or even restore from a backup. When I try it says itunes cannot start a session with the ipod: a session couldn't be started?
<body><p>It's probably because you were on the iOS 6 beta, which just expired. You'll need to get the final 6.0 release from the developer iOS portal <a href="https://developer.apple.com/devcenter/ios/index.action#downloads">here</a> and install it manually.</p></body>
-
I have this site that when they get to a certain point, I
want their
session to end so they can't go through the whole process
with the same
session.
First, how can I end their session?
Second, how do I force a new session to begin?
Is there something that can be set on the server so that when
people hit
a certain page, a new session is started?OK - what are you using ASP, .net ?
Session.abandon is pretty simple, it kills all session stuff
(like
variables)
<% Session.Abandon %>
On a page would literally terminate the session
Starting a session is automatic, no action neccesary ?
Gerry
http://www.Mixit.TV
"Lee" <[email protected]> wrote in message
news:eojhgm$l6g$[email protected]..
> I've heard of using
>
> Session.Abandon
>
> Where would this go and how does it work? -
D-Bus: How can root access a user's started session?
D-Bus is really useful for automating a lot of tasks, and I want it to respond to certain ACPI events using a acpid configuration.
However, acpid runs as root, and it seems like root cannot find or access a logged in user's D-Bus session.
Example:
# purple-remote 'setstatus?status=offline'
No existing libpurple instance detected.
(the command works fine from the logged in user's shell)
I've googled around a bit, and there was a hit about changing the euid of the shell, but changing this via zsh's EUID environment variable had no notable effect on the outcome.
Any ideas? I tried with sudo -u <username> but that doesn't help either.
Last edited by Natanji (2014-04-30 12:25:43)D-Bus is really useful for automating a lot of tasks, and I want it to respond to certain ACPI events using a acpid configuration.
However, acpid runs as root, and it seems like root cannot find or access a logged in user's D-Bus session.
Example:
# purple-remote 'setstatus?status=offline'
No existing libpurple instance detected.
(the command works fine from the logged in user's shell)
I've googled around a bit, and there was a hit about changing the euid of the shell, but changing this via zsh's EUID environment variable had no notable effect on the outcome.
Any ideas? I tried with sudo -u <username> but that doesn't help either.
Last edited by Natanji (2014-04-30 12:25:43) -
Arch doesn´t start session automatically after last update
I think to remember that some ati drivers were updated, but I´m not 100% sure.
The thing is that Arch start normally, but when it shows the login, it stops. Before the update, the login process was automatic (because the tutorial I followed when I installed it does).
If I put my login and my password, I enter in console mode normally.
I tried with
sudo pacman -Syu
but the problem goes on.
Do I have to erase something?
Thanks and sorry for my English.nilsma wrote:
I had the same problem today with my Radeon HD 2600XT, i solved it by downgrading my xf86-video-ati package from 6.14.4-1 back to the old 6.14.3-2 - i suppose there is some better long term solution to this, but this quick-fix did it for me.
To verify that you did the same upgrade as me, you can check /var/log/pacman.log
To download the old package (xf86-video-ati 6.14.3-2) you can visit http://schlunix.org/archlinux/
You should also consider reading https://wiki.archlinux.org/index.php/Do … g_Packages - though I am unsure how updated that article is, maybe someone else could comment on that.
I have the same problem. I had the 6.14.3-2 version and now the 6.14.4-1.
Can you explain me (step by step) how did you solve it, please? -
Error when I start session in windows 2000 with not-administrator user
Error in WizReportMain.vbc Varaible not defined ODsDialog
The GPI DLL GfsOds.dll you need not loadedHi,
You have to be at least a "Power User" in Windows 2000 to run DIAdem in Windows 2000.
If you are a "Power User" and still ahve problems, please send me another message here and I will look for another solution.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
Hi,
I am working with JRA actions for the first time. I am not sure if this is maintained in the configuration or elsewhere.
I don't see in the JRA Start Session where to supply the SAP Client, Username and Password values? This is unlike MII 12.0.
Regards,
Chanti.The administration for JRA is done entirely in the NetWeaver Admin App.
Here is the quick path: http://<server:port>/nwa/app-resources
Or in the NetWeaver Admin app you can navigate to Configuration Management...Infrastructure....Application Resources
The list shown in the JCO Start Session action is pulled from this configuration. -
XMII v12 - JRA Action Blocks Question
We are implementing v12 (AIX) and require ECC server load balancing for our production environment. Production environment we have multiple xMII servers and multiple ECC servers. (our development environment is standalone, single xMII server, single ECC server). I understand that the JRA action blocks should be used for ECC load balancing instead of the JCO action blocks.
Could not find any information concerning the 3 choices available in the JRA Start Session action block. We do not know which deployed adapter to use.
1. nonGlobalTx/eis
2. shareable/eis
3. unshareable/eis
From a previous post, found the following link, but did not go into detail on the 3 adapter choices:
http://help.sap.com/saphelp_erp2005/helpdata/en/6f/1bd5caa85b11d6b28500508b5d5211/content.htmHere's what it was supposed to say...
David,
Just for completeness on the earlier part of the thread here are the connection definitions:
"Non-shareable" - means that inside a transaction 2 or more physical connections will be created if applications wants to acquire 2 or more connections from one resource adapter. Each connection which is acquired from application will use separate physical connection.
"Shareable" - means that inside a transaction 1 physical connection will be created even if the applications wants to acquire 2 or more connections from one resource adapter. All connections that are returned to the application will share one physical connection. This is the default configuration.
Non-global TX - connections which are acquired from connection factory with this setting will not be enlisted into distributed(JTA) transactions. This is SAP specific setting.
Global TX - Connections are enlisted into transaction. This is the default/standard configuration.
As for SSO, I may have misspoken earlier about this still trying to find a good answer for you. In the mean time here's the best that I can do:
Application authorization - application is responsible to provide user/password during get connection request. Or user/password is specified into resource adapter properties. This is the default configuration in SAP.
Container authorization - means that server is responsible to provide user/psw based on specific configuration which is done on the server. For example SSO is done with container authorization.
The Container Authorization has a bunch of SAP Help ([http://help.sap.com|http://help.sap.com]) on the security configuration here:
([https://help.sap.com/javadocs/NW04S/current/jr/index.html|https://help.sap.com/javadocs/NW04S/current/jr/index.html])
I will continue to follow-up on this but if you keep me updated on your progress it will help me along as well.
Sam
Maybe you are looking for
-
I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plug
-
I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago. My Mac is just hanging and I am unable to shut it down or do anything at all. I left it for 2.5 days hoping the battery will run flat but
-
Does anyone know of a way to insert a windows media video file instead of the standard Quicktime video? Most of the viewers who will come to my site are Windows based and on corporate networks that will not allow them do download and install Quicktim
-
Libraries and event management-Newbie ?
Hi: I'm a still photographer trying to get my head around the FCPX terminology. For my workflow I'm thinking of having 2 libraries, 1 for professional work and 1 for personal work. Then I would create events in each library and then projects from the
-
Limewire library not compatible with version of iTunes
I have the latest update and now the Limewire folder won't open and I get a message saying it is not compatible with the version of iTunes. I also tried to download a song mp3, and it seems to download it, but I can't find it.