JRE 1.4.2_04 install and un-install issues

I was having problems running a Java app and I decided to un-install and re-install my JRE. I am running Windows XP Pro SP1 and IE6 SP1 as well. I went to "Add remove programs" and I noticed I had both of the following:
Java 2 Runtime Environment, Standard Edition 1.4.2_03
Java 2 Runtime Environment, Standard Edition 1.4.2_04
I uninstalled revision 3 ok, but unistalling revision 4 gives me this error:
"Failed to extract file 'Dll_ini' from binary table"
I get the same exact error trying to re-install Java 2 Runtime Environment, Standard Edition 1.4.2_04
I'm stuck here... can anyone lend a hand?

So... 14 hours later...
I found a mirror site that had JRE 1.4.2_03 and I downloaded and installed it and I was able to run the apps, but I still could not un-install revision _04
I did these 5 things and was able to get JRE 1.4.2_04 installed. Actaully, once the Sun license acceptance page came up on install I canceled it because the errors Iwas getting previously happened prior to the License page, so I knew it work. I un-installed revision _03 and then installed revision _04 with the hopes of squelching further errors.
1. Check and make sure msiexec.exe is not in memory. If it is, and no setup is running at the time, end that task and restart the system. Alternatively, try START, RUN, type "msiexec /unregister", OK and then START, RUN, type "msiexec /regserver", OK
2. Clean out the Temp directory. C:\Documents and Settings\<USER NAME HERE>\Local Settings\Temp
3. Delete the C:\Program Files\Common Files\InstallShield\Driver folder and then rerun the setup.
4. The other potential cause is a missing Stdole.tlb, stdole32.tlb, or stdole2.tlb file. These are core Windows files and should exist on your machine.
5. I ran SFC.EXE, I did have core WinXP Pro files missing. See MS Knowledge Base article Q310747 http://support.microsoft.com/default.aspx?scid=kb;EN-US;310747
Some of the InstallShield info came from here http://support.installshield.com/kb/view.asp?pcode=ALL&articleid=Q105416&source=support_central&product=wind
Hope this helps you all!

Similar Messages

I was updating i-tunes on my windows vista but it stopped working after that.Since then i have un-installed and re-installed it a dozen times but it shows the same error (Apple error:2

Hi
Recently I purchased Iphone 4-s and tried to connect it to my existing i-tunes but it didnt recognise the device. So I tried updating the I-tunes to see if it made a difference but it was no good.
Hence i followed the trouble shooting and uninstalled and re-installed i-tunes but it wont get installed properly now. Since then I have un-installed and re-installed the complete set of i-tune softwares a dozen times but it still gives me the same error- Apple Error: 2 and Windows Error :2 and report of being unable to install the Apple Application Support software. I have spent 2 1/2 hours talking to the Apple Technical Support Team regarding this but it still hasnt been resolved.( In addition, i have ensured the firewalls are disabled and also opened new user account (admin priviledges) to try and download it)
Now not only can i use my iphone but also my ipod is out of action in regards to music and downloads.
I would really really really appreciate anyone helping me in this matter as i am in dire straits now.
Thank you so much in advance
Regards

I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
~ Arpit

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and i was using it just fine yesterday.

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and I was using it just fine yesterday.
2015-02-24_1129 - DavidIpromote's library

Try resetting Photoshop Preferences. Use your Photoshop start icon to launch Photoshop and immediately press and hole Shift+Ctrl|CMD+Alt|Option keys Photoshop should Prompt you with Do you want your Preferences deleted. Reply yes. Photoshop should then delete your user ID preferences and then create a default set of preferences for your ID and start successfully.

Photoshop CS2 un-installed and re-installed without de-activavtion. Activation window refuses to procede.

? Photoshop CS2 on Windows Vista. On start-up PS refuses access. Decided to un-install and re-install, unfortunately not thinking of de-activation. Now, on start-up, window offers registration which always fails. I am not offered help>de-activation, or help>transfer activation. Help>Adobe Forum!

Did you use the right serial number? The windows download is 348MB the Mac download is 441MB If your was 380MB there may be a problem with what you downloaded... If you can not get it to install you may have to contact Adobe customer Support. However CS2 is no longer suppoorted.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

HT1923 When trying to access i tunes store when in I Tunes i cannot connect to the internet - any thoughts? i have tried un-installing and re-installing but no joy

When trying to access i tunes store when in I Tunes i cannot connect to the internet - any thoughts? i have tried un-installing and re-installing but no joy

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Since most recent OS update, my iMac intel won't open my HP Officejet 4500 scanner. I have un-installed and re-installed the 10.8.3 update and the dame with HP drivers. I get the essage (HP scanner won't open because of a problem". Suggestions???

Since most recent OS update, my iMac intel won't open my HP Officejet 4500 scanner. I have un-installed and re-installed the 10.8.3 update and the dame with HP drivers. I get the essage (HP scanner won't open because of a problem". The printer works, but not the scanner. Suggestions???

It's possible that you need new drivers from HP, in order to be compatible with OS X 10.8.3. Looking at HP website, they haven't released new drivers since last November. You might need to wait for new drivers or contact HP to push for an update.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=3919448#N218

This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

Have managed to cure it based upon the following information received -
I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
What I did:
Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
Solution
I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
4) Click OK
5) Double click the AppleMobileDeviceSupport64.msi
6) Tell it to Repair your current installation
7) Done!

I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC. I have un-installed and re-installed iCloud on my PC twice. Suggestions?

I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC. I have un-installed and re-installed iCloud on my PC twice. Suggestions?

I had been using iCould without problems, but recently my tasks have been disappearing from my PC and my tasks and calendar do not sync or update between my iPad and PC. I have un-installed and re-installed iCloud on my PC twice. Suggestions?

I downloaded Acrobat XI Pro onto my work computer on Friday. It downloaded in French though I indicated I needed English. I de-installed and re-installed several times but always French. How do I change that option?

I downloaded Acrobat XI Pro onto my work computer on Friday. It downloaded in French though I indicated I needed English. I de-installed and re-installed several times but always French. How do I change that option?

Hello,
you could adapt the answer from there Re: Change language in Acrobat XI Pro - It does not work
... and if your Acrobat XI Pro is a part of CC you could work according to this scheme Adjust the install language | CCM >>> I quote: The language for the Creative Cloud applications is different from what you expect.
Hans-Günter

Will I lose artwork by un-installing, and re-installing Adobe Draw to fix "Send to Illustrator" option?

I believe that re-installing Adobe Draw might help activate the "Send to Illustrator" option on the app, as it not currently showing in my app. Will I lose my layers and artwork if I try to fix this by un-installing and re-installing the app?
I've created a detailed, multi- layered artwork on Draw, while running the trial version of CC Illustrator on my computer. I've since paid for a CC subscription in order to send the file I'm working on to my laptop to finish, but still I have no option to send the layered vector image.

none of the files your create using adobe programs are removed when uninstalling adobe programs. that said, you should not save production files in the same directory as your installed program files (for adobe or anyone else's programs).

Summary: Install (and re-install) steps of SAP NW 7.01 ABAP Trial

This forum is awesome !
After ran into bunch of errors (200 601 etc) during install, thanks to all the Q&As especially posted answers in multiple thread discussions, I finally managed to make the install a success.
I put following summary here hoping to help anyone who is trying to install or re-install of NW 7.01 ABAP trial, please use it as a reference or preparation guide.
- On an XP SP2 system (mine is a Dell laptop w/ 1G RAM), make 15G space on D: drive for final trial product (under D:\SAP), and 10G space on C: drive for downloading rar files and install process itself.
- Download the SAPNW7.01ABAPTrial.part1.rar and SAPNW7.01ABAPTrial.part2.rar, put them both under C:\downloads\nw701, use 7zip to unzip SAPNW7.01ABAPTrial.part1.rar at the place, and you will have a new "SAPNW7.01ABAPTrial" folder with trial guide "start.htm" under it. C:\downloads\nw701\SAPNW7.01ABAPTrial is the <extract folder> referred by SAP.
- Check against the list at <extract folder>/DOC/html/SystemRequirements.htm, make sure the system requirements are met.
- If the system is behind a firewall and a router with DHCP (mine is behind a Linksys and it gets IP 192.168.1.100), you have a network install so continue to next step. (I also tried successfully with non-network install, using the loopback adapter setup and changing windows system32\drivers\etc\hosts file, as detailed in <extract folder>/DOC/html/loopback.htm. All other steps stay the same.)
- Exclude entries in windows system32\drivers\etc\services files for the ports 3200, 3600 and 8000 (using # to comment out lines having these port numbers).
- Pick a DB password for MaxDB, Say <syspwd>.
- Open <extract folder>\RegCleanTool and double click RegistryClean.cmd, this is to stop and remove all (lingering) blocking services to make way for SAP and MaxDB.
- [This step is for re-install] Drop existing MaxDB instance by : Control Panel > add/remove programs > change/remove programs > MaxDB > remove, then select "Remove MaxDB components". When challenged by uid/pwd, user control/<syspwd>.
- In Control Panel > Sys Admin > Services, search and find "Server" service (named "lanmanserver"), make sure it is automatic started with OS. This service on XP enables named pipe and file sharing etc, which is critical for named pipe usage in the install (A Java Error error code = 200 STACK_TRACE: 15 at 96% install which I struggled with for days, as detailed in log file D:\SAP\NSP\home\steps.StopSCSInstance.log, was due to this disabled service).
- If for whatever reason you still find MaxDB and SAP services in Control Panel > Sys Admin > Services at this step, you can use regedit and manually search and delete "sap" and "maxdb" entries -- I did this but CAUTION !!! do this as your own risk !!!
- For the sake of cleanness, you may want to delete all existing JRE or JDK installed (I did this) because the trial has its own Java engine for install.
- Open <extract_folder>\sapmmc, double click sapmmcX86u.msi to install SAP Management Console.
- Delete \Program files\common files\InstallShield folder
- [This step is for re-install] delete D:\SAP and D:\sapdb, where SAP NW and MaxDB reside
- Reboot now
- Open <extract folder>\image, double click setup.exe, and follow the instructions on screen to install MaxDB and SAP NW, where you need to specify d:\sap as install destination and <syspwd> as MaxDB password (its uid is "control").
- Reboot again if install is successful. o.w. Check errors in D:\SAP\NSP\log.txt and log files in D:\SAP\NSP\home and D:\SAP\NSP\DVEBMGS00\work and search in this forum !
Hope this help your install ! Have fun !

Could be issues of network, db or OS services...
That's why I suggested to "Check errors in D:\SAP\NSP\log.txt and log files in D:\SAP\NSP\home and D:\SAP\NSP\DVEBMGS00\work and search in this forum" as the last step.
Did you see any error in either or all of those files?

OEI Install and Re-install issue

Hi all,
I have a user that has uninstalled and re-installed OEI, and now he is getting a runtime error
Runtime error '5';
Invalid Procedure call or Argument
Looking at his screenshot, it looks like it is when he is trying to sign-in to CRM OD.
Appreciate your help and expertise.

I had that happen to one of my users. The cause was firewall (Cisco Security Agent) settings on the user’s machine blocking Outlook/OEI access to CRM On Demand.
Resolution: Log into user’s machine as an administrator and clear all of the user’s firewall settings that are blocking the connection. In the Cisco Security Agent firewall, under Untrusted Applications, clear the log by highlighting all entries and clicking the Delete key. This will require the user to respond to the firewall the next time he/she uses Outlook Email Integration (OEI).
Hope this helps!
John

KB2565063 installed and not installed, errors 80070643 800B010B

This is weird even by MS standards. I have several servers (but not all) on which KB2565063, C++ Redistributable SP1 fails, but in Control Panel/Programs it says it installed with version 10.0.40219, which is SP1.
In Event Viewer you find error 80070643 (a generic failure) and in Windows Update/View Update History you find failed with error 800B010B (a generic trust failure). I've tried several things, including uninstall/reinstall and repair but they don't work.
If you manually try to install the patch it'll ask you if you want to repair, which means it thinks it's installed. So why on earth does Windows Update and Software Center think it failed?

Hi,
The return code from the update is 80070643. So SCCM thinks it is failed. I suggest you try uninstalling the update and try installing it manually, then observe the log file to determine how the installation goes.
Juke Chou
TechNet Community Support

JRE 1.4.2_04 install and un-install issues

Similar Messages

Maybe you are looking for