JRE 1.5.0 installation hangs with error 1311

When I attempt to install JRE 1.5.0 (manual, online) on an IBM NetVista with Windows XP OS the process hangs with error message 1311 [Source file not found. D:\Documents and Settings\...\...\...\...\...\ja150000[1].cab.] Any ideas on how to get around this?

Use the offline install - download the file and click it.

Similar Messages

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

JDK installation finished with error code -3

I tried to use the installer for netbeans IDE + jdk (jdk-7u21-nb-7_3-windows-i586.exe). All of the netbeans stuff is installed fine, but the jdk part fails, but at least this time it lets me know "Installation of JDK 7 Update 21 was not completed."
The log files just say there is an exception at org.netbeans.installer.utils.exceptions.InstallationException: JDK installation finished with error code -3.
So it has worked fine on my other machine, I am at a loss here. Sorry again that I couldn't figure out where to post this.

I tried to use the installer for netbeans IDE + jdk (jdk-7u21-nb-7_3-windows-i586.exe). All of the netbeans stuff is installed fine, but the jdk part fails, but at least this time it lets me know "Installation of JDK 7 Update 21 was not completed."
The log files just say there is an exception at org.netbeans.installer.utils.exceptions.InstallationException: JDK installation finished with error code -3.
So it has worked fine on my other machine, I am at a loss here. Sorry again that I couldn't figure out where to post this.

Solman installation stuck with error - SLES 10 , Oracle 10.2.0.4

Hi,
Solman 7.0 installation with ehp1 installation stuck with error - SLES 10 , Oracle 10.2.0.4
the error is at the step install DBA tools -> error is 'select status from v$instance did not match /^\s(\S+)\s$S/gNaNOPEN MIGRATE'.)
Just FYI : we had issue while installing Oracle , we have followed work arround 3 in the SAP Note 980426
Kindly help to proceed further
Thanks & regards,
Prabhakar Reddy.Y.C.

sapinst.log
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2010-11-21 06:55:22.502
MUT-03025 Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ERROR 2010-11-21 06:55:22.533
FCO-00011 The step runSapdbaroleSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|
runSapdbaroleSql was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Edited by: prabhakaryc on Nov 21, 2010 7:01 AM

App installation fails with error 0xE8000004

hello,
i have purchased a navigation (GPS) application for iphone and ipad but installation fails with error 0xE8000004, even if the application is the only one (i have removed all other apps). I have tried on iphone and ipad and using different OS: Windows 7 professional 64 and Windows XP 32.
Has anyone an idea of the problem ?

Already done and this was the reply:
Response (Frederick) - 03/01/2011 12.59 PM
Dear Ettore,
Thank you for contacting CoPilot Technical Support.
If you are experiencing download issues between two Apple platforms (here between the iPhone and iTunes), I advise you contact Apple directly from your purchase history in iTunes then 'Report a problem' as ALK is not in charge of the installation on this device.
Then i contacted Apple and the reply was:
Ettore, please call up to the iPhone technical support. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
I am a little bit disappointed.

Elements 12 installation fails with error DF 037

During installation of Elements 12under Windows 7, while installing Shared Technologies installation stops with error DF 037, and then reverses the entire process. I found the corresponding errors in the installation log: Unable to delete a number of directories under:
c:\Program Data\Adobe\Camera Raw\Lens profiles\1.0\Tokina\
I deleted these directories manually, but the problem persists and the deleted directories are back.
Any suggestions are greatly appreciated.

See if this troubleshooting link helps. There is a section on shared technologies and rolling back:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Ipseckey hang with error PF_KEY socket timed out

When I use ipseckey program (on Solaris8 for intel) to add new SA,
ipseckey hang with error PF_KEY socket timed out.
other command like "dump" or "save all" still work
can anybody help ?
le huy

Sorry, but I don't know exactly, it was work of network admin (or sysadmin). I think relation between Application Server and Database Server was corrected - at the server or at the Data Communications Equipment.
But problem was OUT OF WebCenter Spaces, any adjustments at WebLogic Server, etc... had no results.
Sorry.

VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"

VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
Thanks
NM

Hello,
Do you mean you are trying to use this tool:
https://www.microsoft.com/en-us/download/details.aspx?id=40760
Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
I want to know which assemblies failed to be verified.
By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
“Signature or catalog could not be verified” is always related to corrupt source
, please double check you have a healthy network and then try the web installer again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trying to download update to 10.5, but installation interupted with error stating another installation is in progress. No other preocesses are running. Can you help?

Trying to download update Itunes to 10.5, but installation interupted with error stating another installation is in progress. No other preocesses are running. Can you help?

We can sometimes get past this particular message by reregistering the Windows Installer Service.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
If you have a 32 bit system
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Restart the PC and try another install.
If you have a 64-bit system
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another install.

Installation failed with error code 1603

Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
Naveed

I have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done

HHelp can't sync Calendar. It hangs with error -"403" to operation CalDAVMigrateToServerQueueableOperation

HHelp can't sync Calendar. It hangs with error -"403" to operation CalDAVMigrateToServerQueueableOperation

Hello, workhorse.
Thank you for visiting Apple Support Communities.
Try removing the preference to sync calendar events in iCloud preferences. Once this is done enable the preference again and see if this resolves the issue.
Turn iCloud Calendars off and back on:
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences, then select iCloud.
Deselect the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and select iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue is resolved.
Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
If the issue persists, try all remaining steps in the article below.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
Regards,
Jason H.

CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.

Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

Installation hangs with Third Party Source component

Hi,
The installation hangs when it is installing Third Party Source (57%) in my environment.
This is my environment:
1. Solaris 10 x86 5/08
2. SunStudio12ml-solaris-x86-200709-pkg.tar
3. Installation method: single user, graphical user interface
4. Hardware: VMware Workstation 6.0.2, CPU 1.5G, memory 400M
I searched in SunStudio12ml-solaris-x86-200709-pkg.tar, and I could not find SPROrdbks package which belongs to Third Party Source component.
I suspect this is the root cause of my installation problem. I restart the installation, and I do not select to install Third Party Source component. But the installation process now hangs when it is installing Performance Library (56%). I don't what is the root cause :P
Can anyone help me?
Thank you very much!
Regards,
O2Cabin

Hi,
You could find log in the /var/sadm/install/logs directory. Probably it helps you.
(for example: /var/sadm/install/logs/Sun_Studio_Ceres_software_install.B09161643)
Unfortunately the SunStudio12 installer could have problems with virtual environments.
The Sun Studio is distributed as tar.bz2 archive (for latest Express it is wrapped into sh script).
You could just unpack it. The only difference is that there no packages are created.
Could this helps you?
Also if you use OpenSolaris you could install Sun Studio from IPS.
Thank you

Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.

I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

JRE 1.5.0 installation hangs with error 1311

Similar Messages

Maybe you are looking for