JRE 6u2 is unable to recognize proxy autoconfiguration functions

JRE 6u2 is not able to determine the correct proxy-settings from proxy.pac File if it contains the 'IsInNet" or "IsResolvable" functions. Instead JRE falls back to DIRECT. I am looking for the workaround for these functions.

Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the  server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access. 
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which  the certificate is valid.
Subject
The data in the  Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

  • Imovie on my ipad ...refuses to recognize AVCHD Video. Also when i remove video clips already used in a project, it is unable to recognize missing clips after I've put them back. How do I get around these 2 issues?

    My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?

    Hi Craig,
    I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
    If you find a solution it would be much appreciated to share it here ... I'll do the same.
    Thanks,
    Rafael

  • ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

    Hi,
    I am need of help! I have had this issue for a while now and it's becoming frustrating.
    My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
    I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
    Someone please help me fix this problem.
    Many thanks.
    Matt.

    Hi
    So just close iTunes and re-open iTunes thats it and that worked for you?
    When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
    Thanks.

  • HT1386 I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?

    how new is the Notebook ?
    Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB

  • Unable to recognize the server status in OEPE, shows error alert

    Hi,
    On windows 32 , I installed the WSL 10.3.3 + OEPE and the OSB 11g.
    I have configured the a base_domain with a dtabse of 10g (10.3) Express edition.
    When I try to start the server from OEPE (Eclipse), the server starts and the console show the server is RUNNING. Even I can connect to OSB Console from Browser.
    However, the servers tab in the eclipse unable to recognize the status, and returns back to STOPPED with an Alert message "Server xxxx unable to start.
    So I am not able to do anything in the OEPE, its urgent please, any help .
    Thanks in advance.
    -- Khaleel

    Hi Ravi,
    Thanks for the suggestion. Actually the server and domain all are running well. I can start and stop from the startup menus and command scripts.
    The only issue is in the Eclipse (OEPE) when I try to connect the server. However I found the solution that I need comment the localhost entry in hosts file as below.
    # 127.0.0.1 localhost
    Now the server is connecting well. However I have another issue, that I am not able to shutdown the server from startup menus. I suspect the t3 protocal and HTTP protocal related. If you have any suggestions please help me.
    Note: if still have issues then try by removing the LAN connection, or install the Microsoft Loopback Adapter.
    But I am still looking for options without commenting the localhost in the hosts entry.
    --Khaleel
    Edited by: Khaleel Shaik on Dec 8, 2010 2:58 PM

  • Unable to recognize document as valid XSDCheck the selected category

    w.r.t the thread below,  any solution expert..
    Unable to convert imported document to WSDL      --- PI 7.1
    in Pi 7.0 XSD is working perfectly... in XML spy its not showing any error. but when i want to upload in 7.1 its giving errror like
    Unable to convert imported document to WSDL
    Reason:
    Unable to recognize document as valid XSDCheck the selected category
    what change i should make in the xsd... so that it can be imported in 7.1

    Hi
    What you can do is (in XML Spy) generate a sample XML file from your schema. Make sure you tick of for "Generate all elements".
    From the sample XML file that you get, generate a schema (Generate DTD/Schema). This new schema will be different to the one you have, but importing it in PI should work.
    When you use it in your message mapping, just make sure that you choose the correct field as the top node and also check that all fields are there (they were in my case and worked as a glove..:).
    regards Ole

  • I received a message to upgrade my Firefox version . It went to successful completion but I get a message unable to find proxy server?

    After updating to latest version of Firefox i am unable to access internet. Get message Unable to find proxy server. This update also disable internet explorer so I cannot use it to access either. The desktop that I am having trouble with is running Windows XP Professional.

    hi, please check in the firefox ''menu ≡ > options > advanced > network > connection - settings...'' if firefox is set up to directly connect to the internet ('no proxy').
    and maybe also run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan].

  • Unable to recognize USB modem

    Dear Friends,
    I have upgraded to Lion 10.7 and I face this issue:
    My MacBook Pro unable to recognize my USB modem. It says "USB modem disconnected or unavailabe"
    I have uninstalled and installed the USB modem but it shows the same error.
    What could be the problem? All softwares are up to date.
    Any help appreciated

    Thanks dobwalls,
    I solved my problem with BANYM's BLOG.
    ( http://www.banym.de/mac/huawei-umts-usb-stick-with-snow-leopard ) Its awsome
    I used dashboard installer located on ( http://www.huaweidevice.com/resource/mini/200910149695/testmobile1014/index.html ?directoryId=3874&treeId=0 )
    Here are the steps I made to solve this problem:
    1) connected my USB stick to my Mac Book Pro.
    2) Downloaded the first package on http://www.banym.de/mac/huawei-umts-usb-stick-with-snow-leopard
    3) Used the dashboard to find the installation package located in resouarces folder of USB stick.
    4) completed the installation successfully
    Then it works 
    Thank you for your answers here, it was a big help to find this solution
    Best Regards.

  • Unable to recognize blank DVD+R

    When I insert a blank DVD+R into the cd/dvd drive, the system goes through its usual gyrations and then about 15 seconds later the drive bay opens, and there are no error messages. It appears that the drive or system is unable to recognize a blank DVD+R disc.
    There isn't a problem viewing DVDs (commercial or superdrive burned discs)
    iMac PowerPC G4 800Mhz Flatpanel Mac OS X (10.3.9) SuperDrive

    Apple change the Open Firmware with the 10.4.6 Update! That's the problem that now no DVDs will be recognized by the system.
    It's no Hardware problems! It's the software. Burning DVDs was problematical since 10.4.0 and Apple did a worst work.....with every Update since 10.4.4 it's even worster...
    So, with the change of the firmware its not possible to burn DVD with Panther or earlier Tiger Versions as well because all of these Mac OS X Versions useing the changed Open Firmware.... :((
    So, if Apple doesn't change it one more time you still have a non working SuperDrive on every Release of OS X

  • IPad unable to recognize bluetooth device after "forgetting" device.

    I recently bought a pair of Sennheiser PXC310 BT wireless bluetooth headphones to use with my iPad. It worked fine until one day a friend pressed the "forget device" option in the iPad's bluetooth menu. Since then the iPad is unable to recognize headphone's bluetooth signal, even though the headphone's bluetooth is turned on. Can somebody please help me reconnect the device? Also restarting has NOT helped. Thanks a lot!

    So it turns out that infact this is not an Apple issue, it was a Sennheiser issue. The headphones needed to be reset. http://www.sennheiser.co.uk/sennheiser/products.nsf/resources/DD29E4FD02028BB9C1 257611003F55A9/$File/PXC_310_BT_US.pdf#page21 This helps.

  • Unable To Recognize Music CDs

    I upgraded to Leopard, but now am unable to recognize music CDs. I can recognize data CDs and DVDs, but none of the 10 music CDs I've tried, commercial or homemade is recognized. Has anyone else had this problem?

    symonty Gresham wrote:
    I was able to fix all issues by zapping pram ( cmd-opt-P-R at startup )
    Good. That usually solves these kinds of things. It's like pounding on the TV

  • Proxy Autoconfiguration File, Authenticated Proxy and iTunes iPad/iPod updates

    Hi All,
    Please can someone advise if there is anything that can be done to get iPad/ Ipod updates working using iTunes and an authenticating proxy server?
    Scenario is as follows:
    1. Proxy settings in IE is configured using a proxy autoconfiguration file (PAC file).
    2. The URLS *.apple.com is allowed to bypass authentication on the Proxy server.
    3. Itunes is used to update the devices from a PC running windows as OS.
    When Itunes is opened, the connection to the Itunes store works 100%. The iOS downloads using iTunes is also successfull.
    Issue:
    As soon as the downloaded iOS is being extracted and communicated to the devices, iTunes fails with an error code of 3004..
    It seems like the PC is trying to make direct connections out instead of using the proxy settings in the PAC file.
    Any advice / ideas to get this working?
    Regards

    HI,
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    If you have Safari 3rd party plugins, they may not be compatible with 10.6. Go here for trouble shooting.
    If you use GlimmerBlocker by chance, that could be the culprit. Check out this thread.
    http://discussions.apple.com/thread.jspa?messageID=10589731
    http://support.apple.com/kb/TS1594
    Same with any Input Managers. Move any files in the /Library/InputManagers folder to the Trash
    If you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
    Go to ~/Library/Cookies and move the Cookies.plist file to the Trash.
    Try Open DNS - Free / Basic
    If Safari still can't open web pages, go to the Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If Safari loads web pages then that .plist file needs to be moved to the Trash.
    Carolyn

  • Proxy autoconfiguration

    I think i detected a problem with proxy autoconfiguration.
    We have created a wpad.dat file and configured the DNS to point to the web server with the file. This works ok with Internet Explorer and Chrome. Windows proxy settings are configured to "automatically detect" the proxy server.
    But it doesn't works with Firefox with the default "use system proxy settings" option (in Options -> Advanced -> Network -> Connection). It works well if i select "autodetect proxy settings on this network" instead (note: i have firefox in spanish, the name of the settings in english could be slightly different).
    I think it's either a bug, or i misunderstood what the default option does.
    I'm using Firefox 24 in spanish.

    Hi,
    proxy autoconfiguration (PAC) is working in 10.5.1 for us for an admin user, it is also working for a simple user but not for a user which has parental control activated, even if nothing is restricted. That's really a big bug

  • Satellite A200 (PSAE6E) - Unable to recognize WLAN driver

    Hi
    I have a Satellite A200 PSAE6E with Vista.
    I just want to install WXp and erase Vista.
    When Xp was installed, all is Ok, except that my computer refuse to recognize my Wifi card...
    Always the same, after boot sequence, desktop windows appeared, and a message : New material detected...
    When I decide to make automatic research and install...............nothing.
    When I look in the control panel >>>>> device manager
    In rubric " Other Device" appears : Network Controller with a yellow !
    And impossible to find a good driver....
    In the properties , detail sheet it is written :
    PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
    I download all the drivers from toshiba download center (for XP) and i try also to download Intel drivers............... NOTHING....
    Please if someone can help me....
    François

    Hello
    Thanks for this information, yes i forgot to update Bios version to the Win Xp version.
    Secondly with this string :
    PCI\VEN_8086&DEV_4229&SUBSYS_00008086&REV_57\..... ...
    I identify my Wifi card like Intel : Intel Wireless WiFi Link 4965AGN(supporting 802.11a/b/g/Draft-N)
    Found here : http://www.pcidatabase.com/search.php?device_search_str=4229&device_search=Se arch
    But when i try to install Intel driver .... nothing mater ...it doesn't work (it's saying : "The driver installed doesn't work" "Error code 10")
    So unable to recognize my Wifi Card ....

  • I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

    I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

    Hi there
    I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these.  Instead it just took me to the
    adobe page with nowhere visible to update.  I then  sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
    functionality  It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe. 
    I have since remedied the problem as  my original lightroom 5.7 icon is still available on the desktop and have gone back to that.  I do feel that this is a bit
    of a rip off and an unnecessary waste of my time though.
    Thank you for your prompt reply by the way.
    Carlo
    Message Received: May 04 2015, 04:52 PM
    From: "dj_paige" <[email protected]>
    To: "Carlo Bragagnolo" <[email protected]>
    Cc:
    Subject:  I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have
    reduced functionality what it this about and how do I get my product back
    dj_paige  created the discussion
    "I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
    this about and how do I get my product back"
    To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
    >

Maybe you are looking for