JRE 7update25 binaries got changed

About one week ago, the JRE released this version and the installer we downloaded from the website gave us
jre-7u25-windows-i586.exe sha1:0adf48a414d81d2c7fafe93298644d9e26a5706a size:31714216
But since yesterday, the one we downloaded is changed.
jre-7u25-windows-i586.exe sha1:08ce588fb3668e987a0fa93becf754e9c8027d51 size:31714728
Similar changes happened for 64-bit installer as well.
The version is not updated and there is no notification at all. I'm not sure what is the change made but apparently, there must be some fixes which mean the previous installers contain issues.
This caused many problems for system admins doing the update for the managed computers and we are especially frustrated about the changes. This is definitely not the right way for Oracle to do. I hope Oracle could provide an explanation and never do this again!

Well, first check the current version of JRE(i guess you know how to do this...You should be able to see a image(java symbol) under control panel...click on it ..)
If it still points to old JRE.....you can manually delete it from the registry

Similar Messages

My phone got changed to another language and now my phone is disabled from trying to unlock it numerous amounts of times. The phone tells me to connect to itunes, but itunes tells me that I must insert the password into the iphone before proceeding.

my phone is disabled because the language got changed and I kept trying to unlock it. It tells me to connect to itunes but then itunes tells me that I have to insert the password on my iphone before proceeding. I am unable to type in the password. Help!!

If you forgot your passcode, you have to use recovery mode to restore
http://support.apple.com/kb/HT1808

Some how my IPOD Shuffle play list got changed to genres, I can't get it back listed as I added each song?

My play list for my I POD Shuffle somehow got changed to genres. I can't find a place to help me return it to it's original version of 1st song, followed by second
etc: I have 169 songs, and need help?

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

GR based IV is disabled but it got changed

HI gurus ,
We are using SRM 5.0 Extended classic scenario, ECC 6.0
In the Purchase Order ,item data-> Follow-on documents -> Confirmation-Related Invoice Verification is disabled.
But somehow the GRIV indicator got changed , I can see the change log for the same.
User just changed the Requester and Goods recepient , but the change log shows he changed the GRIV indicator too.There have been no changes on the GRIV field in the vendor master.Also when the changes were done, there were already some partial GR and invoices posted for the PO.
Because of this , the PO fell into 'error in process' from 'ordered' status. Although I have removed the GRIV indicator at the table level and pushed the PO again into ECC which has changed the status of the PO to 'ordered' again, I want to know how the GRIV indicator got changed automatically ?
Is there any OSS note for this ??

Hi experts,
We are on SRM 7.0 ECS , support pack SAPKIBKV08.
Our vendor master in SRM has following flags set:
GR= set
IR = set
GR based IV=set
Now in an SRM PO , buyer wants to set the following flag:
GR = buyer wants to set
IR =buyer wants to set
GR based IV= buyer wants to reset GR based IF flag , since the invoice comes before the GR and has to be paid
But in the SRM system , if GR flag is set , and IR flag is set , then GR based IV flag gets set automatically. Buyer is unable to uncheck it. This is a bug in the system , how to resolve this. the above mentioned notes, 1010791, 1445234,1114343 are not applicable to the system .
(If a PO was directly created in ECC system , and GR falg and IR flag is set , then buyer can manually uncheck the flag)
Rgds
sumendra

How to know whether any item value got changed

How to know in Apex whether any form item got changed. That will help me to know when the user will be pressing the "Apply Changes" button and I will popuplate the "User Modifed" and "Date Modifed" column values in the table. For now, I dont want to write database triggers, but to implement it at application level.

Hi Deb
For a really good explanation of the naming /numbering of tabular form items see Patrick Wolf's blog on the matter.
http://www.inside-oracle-apex.com/which-tabular-form-column-is-mapped-to-which-apex_applicationg_fxx-array/
He also gives a simple example of using check-boxes in tabular forms here
http://www.inside-oracle-apex.com/checkboxes-in-tabular-forms-the-easy-way/
You will notice in his example, that the apex_application.g_f40 is specifically named as 40 - a high number assuming that you don't have more than 39 editable columns in you tabular form - shown in the name="f40" code.
<input type="checkbox" #ADMIN_USER_CHECKBOX# value="#ROWNUM#" name="f40" id="f40_#ROWNUM#"/>#ADMIN_USER_CHECKBOX#
In essence the columns are numbered (only the editable ones) in the order in which they appear in the select statement - so the first editable column will be f(01), next f(02) etc - except where the column is specifically named - in this case f(40).
I had a situation where I wanted to programatically stamp the user's name into a column depending on whether the user checked a check-box in each row.
But if the column is editable and visible, then the user is free to type into this cell - this I wanted to avoid.
Something that took me a while to work out is that you can hide an editable column - so it can updated by your procedure code - not by the user!
The way to solve this is to have the sql statement select the relevant column twice - the first one is the editable one and hidden, and the second copy is a normal report column - displayed but not editable.
I used Patrick's example in the link above to set up my tabular form with the first column as a check-box.
The user then marks the desired rows by clicking in the check-box and submits / saves.
The procedure then detects which rows have been checked - updates the editable (but hidden) database column, and then re-displays the result - with the second copy of the same column now showing the updated value!
I hope this helps.
Look at Patrick's other postings - they are so helpful.
Mike

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Font in Safari got changed, how do i change it back?

How do I revert to the original font in Safari. It somehow got changed 2 OS's ago and I don't know how to change it back. It's currently a very distracting font that is hard to read.

Apple decided to trash that preference in their now basically useless iOSified Safari 6 incarnation. Now, you have to revert to using the Terminal to restore eminently useful preference settings.
Ronald P. Regensburg wrote at MacInTouch:
This works in Safari 6. You may need to empty caches (enable Develop menu in Safari 6—another useless change to previous behavior) to see the result and remove the css setting (to "nothing selected"). Font names with spaces need to be between quotation marks.
Full example for proportional font:
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2StandardFontFamily 'Lucida Grande'
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFontSize 14
Full example for fixed width font:
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2FixedFontFamily Monaco
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2DefaultFixedFontSize 11

I am facing problem zooming and in slide as i think there is some general setting got changed help to rectify.

i am facing problem zooming and in slide as i think there is some general setting got changed help to rectify.

If the screen appears zoomed in then try double-tapping the screen with 3 fingers (with zoom 'on' you need to use 3 fingers to drag around the screen), and then go into Settings > General > Accessibility and turn Zoom 'off', and possibly also change what Triple-Click Home is set to.

TS1424 apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Tha

Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks

Please please help me, if you know how.

How schedule line qty got changed?

Hi,
we observed there is a change in schedule line quantity. We have checked the change log in statistics but there is no record of change. We also checked in CDPOS for change record but there also there is no change record.
As there is Firm zone maintained and the date is with in firm zone, i am not sure MRP run resulted in Schedule line Quantity change.
Please suggest me how can i investigate who and how the quantity got changed.
Thanks,
Raghu

Dear,
Check this similar link: http://www.sapfans.com/forums/viewtopic.php?f=6&t=71921&start=0&st=0&sk=t&sd=a
Hope this will helpful.
Regards,
Syed Hussain.

After the upgrade of SAP the screen got changed

the available tab in the screen got changed after the upgradation.
the changes of the upgrade has been transported to testinf server . But in production system the tabs are different in Project System CJ20N. Here earlier it was artist but aftre upgrade in testing environement its Cust. Enhancement also one new tab introduced LONG TEXT.
PLEASE PROVIDE THE SOLUTION.

Please respect Forum Rules..!!
(do not use full capital letters for message / heading)
It seems your Lay-out of flexible detail screen got changed, which needs to be corrected from the below path.
SPRO >> PS >> Structures >> Operative Structures >> Work Breakdown Structure (WBS) >> User Interface Settings >> Layout of WBS Element Detail Screens >> Define Layout of WBS Element Detail Screens
Please also refer SAP Notes : 304386 and 383310

Background User BWREMOTE got changed to Dialog user

Hello,
Recently we had a refresh in our system and after the refresh I found that a background user BWREMOTE got changed to dialog user and more strange the change documents is showing that the BWREMOTE has itself changed the user type. anybody can comment to this scenario?

Looks like an amateur job (using dialog type user).
You need to restrict the access of bwremote itself.
The first step is S_USER* objects to display only.
Contact your BW developer team. For sure they did it.
Cheers,
Julius

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
Cannot receive any signal "searching" constantly.
Turns off as soon as removed from usb ... wont stay on connected to laptop!
HELP!

The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
Hardware can fail - it happens, which is why there is a one year warranty.

Validate Parent Entity Row when Child Entity Row got changed

Guys,
I want to Validate Parent Entity Row, when a child Entity Row got changed.
How can i do it?

As I said before, define an accessor from child to parent. now you are able to navigate from the child to the parent and can do the validation. Here are some links into the docs:
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/bcentities.htm#sm0133
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/bcrules.htm#CJADEHJD
Timo

Business area got changed in a/c doc after reversing mm invoice..

Hi,
At my client side one mm invoice was reversed and after reversing when we checked accounting document was correct (i.e. Vendor credited and GR/IR debited) but businees area of line vendor credited got changed in a/c document...
how come?
Wat willb the route cause of this...?
Naren

Hi,
Check the assignment of Business area to your plant in OMj7 t.code.
Also check any changes done to the table T134H in SE11 with regards to Business area.
Regards,
Biju K

JRE 7update25 binaries got changed

Similar Messages

Maybe you are looking for